The dashboard owns the visible UI: it captures the orchestrator's stdout into
the support log and strips CSI sequences on the way in, so the colouring was
never seen by anyone. gum charged a Go process start per line for it, on every
phase and every package group. Plain writes keep the same indented shape.
Flushing stays: pacstrap and arch-chroot inherit this fd, so buffering would
reorder our lines against theirs in the log.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The existing hook mask only covers pacstrap. pacman.conf(5) HookDir is
absolute, so it never applied to the pacman runs inside arch-chroot, and during
omarchy-setup-system the target's own hooks are live. limine-entry-tool's
90-mkinitcpio-install.hook triggers on usr/lib/firmware/*, usr/src/*/dkms.conf
and usr/lib/modules/*/pkgbase, and collect_pkgbase_files sets rebuild_all for
any trigger outside usr/lib/modules — so it rebuilds the initramfs and UKI for
every installed kernel. The hardware scripts hit that routinely: sof-firmware
on Intel audio, nvidia-open-dkms, linux-ptl on Panther Lake, linux-t2 on Macs.
Every one of those builds is discarded. finalize_limine_boot runs limine-update
immediately after, which pipes "rebuild" into the same script and rebuilds
unconditionally. They are stale as well as redundant: hardware/nvidia.sh writes
its mkinitcpio drop-in after installing the driver.
Mask that one hook inside the target for the duration of the phase. The
kernel-removal hooks stay live — they only prune Limine entries, which is what
ptl-kernel.sh's "pacman -Rdd linux" needs.
A mask that survived would be invisible until a later kernel update shipped a
UKI-less boot, so it is restored in a finally, again in main()'s finally, and
validate_boot repairs and then insists the real hook is back before reboot.
limine-mkinitcpio-hook is a hard dependency of the Omarchy runtime package, so
that file is always on disk before the mask goes up.
Worth several seconds per avoided build on real hardware. It is invisible in
the VM harness, which installs no hardware packages, so measure it on an Intel
laptop rather than in CI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
omarchy-settings now ships the tuning as a vendor drop-in that outranks the
main config file, so setup_swap's /etc copy decides nothing and is removed only
to keep /etc free for the local admin.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LjeyQZsNBxqyYy9z8KaKm7
Hardware packages like omarchy-hw-intel-ptl swap the kernel mid-install,
so the UKI lands under a name the configurator never asked for and boot
validation halted a perfectly good install. Read the kernels back off
/usr/lib/modules/*/pkgbase instead of trusting the requested name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
archinstall's FilesystemHandler.perform_filesystem_operations defaults to
show_countdown=True, which runs a ~4.5s "5...4...3...2...1" warning
(_final_warning) before wiping the disk. That prompt is meant for
archinstall's interactive TUI; in our orchestrated/dashboard install it
renders nowhere and just sleeps silently on every full-disk install.
Pass show_countdown=False, guarded by an introspection check so it stays
safe on newer archinstall releases that dropped both the countdown and the
parameter. Generalize _method_accepts_users into _method_accepts for the
check.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
archinstall's setup_swap writes /etc/systemd/zram-generator.conf directly
into the target, but omarchy-settings now ships that file as a packaged
config. pacstrap then aborts the transaction on a file conflict
("zram-generator.conf exists in filesystem"), failing the install.
Delete archinstall's copy after setup_swap so omarchy-settings' packaged
config lands cleanly. We still keep the zram-generator package and service
that setup_swap installs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fresh installs on real hardware failed pacstrap with "keyring is not
writable" and "required key missing from keyring". The offline repo's
SigLevel = Optional TrustAll was not the bypass it appeared to be:
Optional verifies whenever a .sig file exists — and every package in the
offline mirror ships one — while pacstrap's pacman -r relocates the
install root but not GpgDir, so verification runs against the LIVE
keyring. That silently made every install depend on archiso's boot-time
pacman-init.service having finished: fast in QEMU, minutes-or-never on
real hardware, where pacstrap then raced it and lost.
The mirror ships inside the ISO, whose integrity is already covered by
the airootfs sha512 and the ISO signature, so pacman-level signature
verification adds nothing. Set SigLevel = Never so installs never touch
the live keyring. The target still gets its own keyring via pacstrap -K
plus the archlinux-keyring/omarchy-keyring package hooks.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
prepare_live waited on archiso's pacman-init.service, stalling real-hardware
installs at 5% for minutes: the boot-time keyring init (gpg key generation
plus populating every keyring) is slow when reading from USB, and as a
Type=oneshot unit with no start timeout it can block systemctl start
indefinitely.
Nothing in the install consults the live keyring. The offline repo is
SigLevel = Optional TrustAll and archinstall bootstraps with pacstrap -K,
which gives the target its own independently initialized keyring. Drop the
wait and let pacman-init finish in the background for anyone using the live
environment interactively.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Full-disk installs flaked with "Partition(s) 1, 2 on /dev/vda have been
written, but we have been unable to inform the kernel of the change":
archinstall's disk wipe and parted's own partition registrations fire
udev probes, and when one is still holding the disk mid-commit, the
BLKPG sync fails and the install halts. The table is written correctly
when this happens — only the kernel's view is stale — so settle udev
before partitioning and redo the filesystem operations (wipe, partition,
format) when parted throws exactly this error. Recoveries are logged so
they show up in the support log.
Reproduced headlessly by booting the ISO on a serial console and driving
the real installer: stock failed 1 in 5 full-disk cycles at this exact
phase, with an audit watch confirming nothing else writes the disk. With
the fix, 13 of 13 cycles got cleanly through partitioning.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Pairs with omarchy-pkgs' fold of omarchy-limine into omarchy-settings.
Changes:
- EARLY_BOOTSTRAP_PACKAGES in phases_impl.py drops omarchy-limine.
The limine configs it shipped (mkinitcpio hooks, entry-tool drop-ins,
snapper template, default/limine/, default/snapper/) now come with
omarchy-settings, which is already in the early bootstrap.
- builder/build-iso.sh's offline-mirror seed list and post-mirror filter
no longer reference omarchy-limine.
- builder/build-omarchy-packages.sh's build queue drops omarchy-limine.
- Test manifests (fresh-4.json, fresh-4-semantic.json) no longer expect
omarchy-limine in the installed-packages list. The /etc/pacman.d/hooks/
99-omarchy-limine.hook entry stays — that hook file is generated by the
orchestrator regardless, and the filename is descriptive, not tied to
the package name.
Pairs with omarchy-installer's rename of bin/omarchy-setup-user to
bin/omarchy-finalize-user. The orchestrator now invokes
omarchy-finalize-user --force --first-install in the run_chroot_finalizer
phase, and the phase-ordering docstring is updated to match.
archinstall's add_bootloader creates EFI/arch-limine/{BOOTX64.EFI, BOOTIA32.EFI}, writes a limine.conf with an Arch Linux entry, and registers an efibootmgr label "Arch Linux Limine Bootloader" — only for limine-snapper.sh to delete it all and rebuild with Omarchy branding via limine-mkinitcpio-hook.
Replace the add_bootloader call with _install_limine_omarchy, which does the same work archinstall's _add_limine_bootloader does (UEFI EFI binary copy + efibootmgr register, or BIOS limine-bios.sys + limine bios-install) but with Omarchy-owned paths and labels from the start:
- EFI subdir: EFI/limine (not EFI/arch-limine)
- efibootmgr: label "Limine" (not "Arch Linux Limine Bootloader")
- loader path: \EFI\limine\BOOTX64.EFI
Compute the kernel cmdline directly from disk_config instead of harvesting it from a file archinstall wrote (whose path keeps drifting across versions). Then write /etc/default/limine and /etc/kernel/cmdline, and stage /boot/limine.conf from our styling template — limine-mkinitcpio-hook will add the actual boot entries when it deploys.
Adds limine + efibootmgr to EARLY_PACKAGES (archinstall used to pacstrap these as a side effect of add_bootloader).
Does not modify limine-snapper.sh — its cleanup code will simply no-op because there are no arch-limine paths or "Arch Linux Limine Bootloader" entries to find. That code can be pruned in a follow-up.
archinstall 4.3 writes limine.conf to <target>/<esp_mount>/EFI/arch-limine/
limine.conf for UEFI non-removable installs (lib/installer.py:1487), not
to /mnt/boot/limine.conf as our code assumed. Older archinstall versions
used different paths.
Probe the 4.3 paths (arch-limine, BOOT, limine subdir) and the legacy
/boot/limine.conf in order; pick whichever exists. Error message now
lists everywhere it looked so future drift is easy to diagnose.
configure_protected_boot used to arch-chroot pacman -S limine
efibootmgr, but at that phase the live ISO's offline mirror is not
bind-mounted into the target yet (run_chroot_finalizer does that
later) and the target's pacman.conf points at network mirrors that
aren't reachable during an offline install.
Pacstrap these packages alongside the runtime package list in
arch_install_base, where archinstall is still pacstrapping against
the live ISO's offline mirror. Drop the now-redundant arch-chroot
pacman call from configure_protected_boot.
archinstall 4.3's Installer.__init__ types target as Path and uses it
directly (self.target / 'boot', etc.). Passing str(mountpoint) makes
self.target a str, so every internal path operation raises
'unsupported operand type(s) for /: str and str' — most visibly during
set_mirrors, which constructs target / MIRRORLIST.relative_to_root().
Drop the str() cast; pass the Path through as-is.
ArchConfigHandler reads --config and --creds from sys.argv via argparse at
construction time; it ignores ARCHINSTALL_CONFIG/ARCHINSTALL_CREDS env
vars (confirmed in archinstall 4.3 lib/args.py:_parse_args). Setting those
env vars was a no-op, so handler.config.disk_config was always None when
the wrapper stripped our args off the real argv.
Fix: build a synthetic argv [prog, --config <path>, --creds <path>] and
swap it into sys.argv just for the ArchConfigHandler() call, then
restore. Drops the unused 'import os' now that the env var lines are
gone.
