* Confirm the Start Omarchy Now prompt after provisioning setup
First-boot account setup now ends on a celebration screen whose Start
Omarchy Now button gates the SDDM handoff, so the provisioning test
must press it — same as the installer's Reboot Now prompt — once the
pending flag clears.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add a centered greeter before the installer keyboard step
Open the ISO configurator with the same greeter the deferred-provisioning
first boot uses — vertically centered logo, the Omarchy tagline, and a
single button — so install and first boot bookend setup identically. The
installer's button reads "Start install"; first boot's reads "Start setup".
Co-Authored-By: Claude <noreply@anthropic.com>
* Animate the installer greeter logo with a skippable ColorShift
Match the first-boot greeter: a looping tte ColorShift over the centered
logo with a "Press Return to Start Install" hint instead of a button.
Return begins the install at any time.
Co-Authored-By: Claude <noreply@anthropic.com>
* Theme the installer greeter ColorShift to the Omarchy palette
Match the first-boot greeter: sweep the logo ColorShift through the
Tokyo Night accent colors instead of tte's default rainbow.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix installer greeter ColorShift: green base, no flash, clean handoff
Mirror the first-boot greeter fixes: indexed ANSI colors (green base with
a cyan accent) because the framebuffer console can't render tte truecolor;
one long tte invocation so the loop never flashes; stty sane + clear after
Return so the keyboard step starts clean.
Co-Authored-By: Claude <noreply@anthropic.com>
* Dismiss the greeter in the QEMU test drivers
The installer and first-boot flows now open with a greeter (animated logo
+ tagline). Wait for the tagline and press Return before the keyboard
step, in both drive paths, so the harness gets past the greeter.
Co-Authored-By: Claude <noreply@anthropic.com>
* Kill the installer greeter animation cleanly
Run tte directly instead of inside a backgrounded `while` subshell, so
killing the tracked PID actually stops the effect. Killing the subshell
orphaned tte, which kept painting the logo over the keyboard step.
Co-Authored-By: Claude <noreply@anthropic.com>
* Guard the greeter wait against set -e in the configurator too
Harmless today (no set -e), but keeps the greeter's animation teardown
robust if that changes.
Co-Authored-By: Claude <noreply@anthropic.com>
* Also settle the terminal in emulators, not just real VTs
wait_for_stable_terminal skipped terminal emulators on the assumption
they're already at final size, but a fresh terminal (or sudo's pty)
reports a stale 24x80 for a moment at startup too. Drop the VT-only gate
so the greeter centers there as well.
Co-Authored-By: Claude <noreply@anthropic.com>
* Test harness: drive the first-boot timezone step and direct SDDM handoff
Match the deferred-provisioning first-boot flow changes: the owner now picks
a timezone after the email step, and setup hands straight off to SDDM instead
of pausing on a celebration screen with a Start Omarchy Now button. Drive the
new Timezone screen (accept the geo-guessed default) and drop the button
confirmation.
Co-Authored-By: Claude <noreply@anthropic.com>
* Don't bake hostname/timezone into deferred installs; set them at first boot
Deferred provisioning defers the user step to first boot, so the machine's
owner should name the machine and pick the timezone there — not inherit values
chosen at install time. Stop setting hostname/timezone in the configurator's
deferred branch: the orchestrator already skips an empty timezone (the system
stays UTC until first boot), and it now falls back to a neutral "archlinux"
hostname for the install so archinstall still succeeds. The first-boot
omarchy-provision-owner form collects and applies both.
Harness: drive the new Hostname screen and assert both hostname and timezone
actually landed on the running system after first boot.
Co-Authored-By: Claude <noreply@anthropic.com>
* Match the installer greeter: solid green logo, no color animation
Same fix as the first-boot greeter — tte's ColorShift judders on the 16-color
framebuffer console (truecolor crush). Show the logo in solid green and drop
the animation so both greeters look identical and flash-free.
Co-Authored-By: Claude <noreply@anthropic.com>
* Harden the provision harness: SSH-blip wait, timezone timeout, hostname assert
- The pending-flag wait treated an SSH connection failure (rc 255) the same as
"flag absent" (rc 1), so a transient blip during finalization would exit early
and snapshot the base mid-finalization. Only break on a clean rc 1; keep
waiting on 0 or 255.
- Bump the first-boot Timezone screen wait 60s -> 180s (tzupdate geo-guess over
first-boot networking can lag; matches the installer's headroom).
- Make the applied-hostname check a hard failure (it's deterministic — we typed
it), so a first-boot apply regression can't pass green; timezone stays a
report since it's geo-guessed.
Co-Authored-By: Claude <noreply@anthropic.com>
* Seed hostname=omarchy/timezone=UTC in deferred install instead of empties
Write neutral valid defaults in the configurator's deferred branch rather than
empty strings, and drop the orchestrator's `config.hostname or "archlinux"`
fallback (hostname is always non-empty now). The first-boot wizard overwrites
both. This keeps the "owner sets them at first boot" behavior without depending
on archinstall tolerating empty hostname/timezone at config-load time.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix set -e regression in the provision pending-wait loop
The previous hardening moved `ssh_guest "test -f pending"` out of the `while`
condition into a standalone command, but the harness runs `set -euo pipefail` —
so the moment the flag cleared (ssh returns 1, the intended "done" signal) it
tripped errexit and aborted the whole run right after provisioning, before the
session/acceptance phase. Capture the result with `|| rc=$?` so the non-zero is
the signal, not a fatal error. Also guard the follow-on hostname/timezone
substitutions with `|| got=""` so a transient SSH failure there can't abort
either (an empty value then correctly fails the hostname assertion).
Co-Authored-By: Claude <noreply@anthropic.com>
* Bring back the installer greeter ColorShift animation
Match the first-boot greeter: restore the static green logo + looping tte
ColorShift overlay. The framebuffer truecolor crush gives it a quick flash,
which is acceptable — both greeters keep the animation.
Co-Authored-By: Claude <noreply@anthropic.com>
* Skip the install celebration on deferred installs; reboot directly
A deferred-provisioning install has nothing to celebrate yet — the owner
finishes setup (and gets the send-off) at first boot. So the installer's
"Installed Omarchy in ..." screen and the Reboot Now prompt now belong to a
direct install only: for a deferred install the dashboard clears and reboots on
its own. .automated_script.sh detects deferred mode (the config's
defer_provisioning flag, or the cidata defer-provisioning marker) and passes
OMARCHY_UI_DEFER_PROVISIONING to the dashboard.
Harness: a deferred install no longer shows Reboot Now, so wait_for_install
recognizes the auto-reboot by the first-boot greeter tagline appearing.
Co-Authored-By: Claude <noreply@anthropic.com>
* Detect deferred mode with jq, not a line regex
The dashboard's deferred detection grepped user_configuration.json for the
defer_provisioning boolean on one line; a reformatted config would read as a
direct install and wrongly show the celebration. Parse it with jq using the
same path the orchestrator reads (.omarchy_install.defer_provisioning).
Co-Authored-By: Claude <noreply@anthropic.com>
* Drop Bosnian and Khmer from the installer keyboard picker
Match the first-boot picker: neither has a console keymap, so both silently
fell back to US. Remove them rather than offer a layout that can't apply.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
