diff --git a/pkgbuilds/intel-ipu7-camera/PKGBUILD b/pkgbuilds/intel-ipu7-camera/PKGBUILD
index 48ade62..3e8bf4c 100644
--- a/pkgbuilds/intel-ipu7-camera/PKGBUILD
+++ b/pkgbuilds/intel-ipu7-camera/PKGBUILD
@@ -1,8 +1,8 @@
 # Maintainer: Omarchy <packages@omarchy.org>
 
 pkgname=intel-ipu7-camera
-pkgver=1.0.3
-pkgrel=4
+pkgver=1.0.4
+pkgrel=1
 pkgdesc="Intel IPU7 MIPI camera stack for Hurrican/Performance (OV08X40 + hardware ISP)"
 arch=('x86_64')
 url="https://github.com/TsaiGaggery/hurrican_omarchy_enabling"
diff --git a/pkgbuilds/intel-ipu7-camera/camera-sleep-hook b/pkgbuilds/intel-ipu7-camera/camera-sleep-hook
index 45461fd..f1d91d8 100644
--- a/pkgbuilds/intel-ipu7-camera/camera-sleep-hook
+++ b/pkgbuilds/intel-ipu7-camera/camera-sleep-hook
@@ -2,21 +2,12 @@
 
 # Handle camera service around suspend/resume.
 #
-# On resume the IPU7 firmware re-authenticates (CSE authenticate_run),
-# but the ov08x40 sensor is not re-bound to the media-controller graph.
-# libcamhal then reports "No sensors available", icamerasrc fails to
-# register properties, and /dev/video50 stays empty — the camera looks
-# dead to every app until reboot.
+# v4l2-relayd must be stopped before suspend to avoid GStreamer crashes,
+# then restarted after resume once the camera hardware is ready.
 #
-# Workaround: after resume, unload + reload ov08x40 and intel_ipu7_isys
-# so isys re-probes the sensor via ipu_bridge.
-#
-# DO NOT unload intel_ipu7_isys pre-suspend: s2idle wake requires the
-# IPU7 driver to be attached, and unloading it before suspend hangs the
-# machine on wake.
-#
-# The post-resume work runs via systemd-run so it doesn't block the
-# lock-screen password prompt while modules settle.
+# Avoid unloading/reloading IPU7 kernel modules from the sleep hook. Module
+# reprobe during resume can hit fragile kernel PM paths and make wake less
+# reliable than a recoverable camera failure.
 
 case "$1" in
   pre)
@@ -24,12 +15,7 @@ case "$1" in
     ;;
   post)
     systemd-run --no-block --unit=camera-resume bash -c '
-      rmmod ov08x40 2>/dev/null || true
-      rmmod intel_ipu7_isys 2>/dev/null || true
-      sleep 1
-      modprobe intel_ipu7_isys 2>/dev/null
-      sleep 1
-      modprobe ov08x40 2>/dev/null
+      systemctl restart camera-init.service 2>/dev/null || true
       systemctl reset-failed v4l2-relayd@ipu7.service 2>/dev/null || true
       systemctl start v4l2-relayd@ipu7.service 2>/dev/null || true
     '
diff --git a/pkgbuilds/v4l2-relayd/0002-escape-optional-splashsrc-expansion.patch b/pkgbuilds/v4l2-relayd/0002-escape-optional-splashsrc-expansion.patch
new file mode 100644
index 0000000..13f2e1e
--- /dev/null
+++ b/pkgbuilds/v4l2-relayd/0002-escape-optional-splashsrc-expansion.patch
@@ -0,0 +1,11 @@
+--- data/systemd/v4l2-relayd@.service.orig	2026-06-15 12:00:00.000000000 -0500
++++ data/systemd/v4l2-relayd@.service	2026-06-15 12:00:00.000000000 -0500
+@@ -14,7 +14,7 @@
+ ExecCondition=/usr/bin/test -n "$HEIGHT"
+ ExecCondition=/usr/bin/test -n "$FRAMERATE"
+ ExecCondition=/usr/bin/test -n "${CARD_LABEL}"
+-ExecStart=/bin/sh -c 'DEVICE=$(grep -l -m1 -E "^${CARD_LABEL}$" /sys/devices/virtual/video4linux/*/name | cut -d/ -f6); exec /usr/bin/v4l2-relayd -i "${VIDEOSRC}" $${SPLASHSRC:+-s "${SPLASHSRC}"} -o "appsrc name=appsrc caps=video/x-raw,format=${FORMAT},width=${WIDTH},height=${HEIGHT},framerate=${FRAMERATE} ! videoconvert ! v4l2sink name=v4l2sink device=/dev/$${DEVICE}" $EXTRA_OPTS'
++ExecStart=/bin/sh -c 'DEVICE=$(grep -l -m1 -E "^${CARD_LABEL}$" /sys/devices/virtual/video4linux/*/name | cut -d/ -f6); exec /usr/bin/v4l2-relayd -i "${VIDEOSRC}" $${SPLASHSRC:+-s "$${SPLASHSRC}"} -o "appsrc name=appsrc caps=video/x-raw,format=${FORMAT},width=${WIDTH},height=${HEIGHT},framerate=${FRAMERATE} ! videoconvert ! v4l2sink name=v4l2sink device=/dev/$${DEVICE}" $EXTRA_OPTS'
+ Restart=always
+ PrivateNetwork=yes
+ PrivateTmp=yes
diff --git a/pkgbuilds/v4l2-relayd/PKGBUILD b/pkgbuilds/v4l2-relayd/PKGBUILD
index 4c74000..b276a5f 100644
--- a/pkgbuilds/v4l2-relayd/PKGBUILD
+++ b/pkgbuilds/v4l2-relayd/PKGBUILD
@@ -2,7 +2,7 @@
 
 pkgname=v4l2-relayd
 pkgver=0.2.0
-pkgrel=2.1
+pkgrel=2.2
 pkgdesc="Plays gstreamer sources into v4l2loopback devices."
 arch=('x86_64')
 url="https://gitlab.com/vicamo/v4l2-relayd"
@@ -16,13 +16,16 @@ depends=(
 )
 makedepends=('git')
 source=("https://gitlab.com/vicamo/v4l2-relayd/-/archive/upstream/${pkgver}/v4l2-relayd-upstream-${pkgver}.tar.gz"
-        "0001-reset-output-on-idle.patch")
+        "0001-reset-output-on-idle.patch"
+        "0002-escape-optional-splashsrc-expansion.patch")
 sha256sums=('0c063edf18dcc6edcdef46e695128cfc2b2d60964ea8538c7e79a2454310c53d'
+            'SKIP'
             'SKIP')
 
 prepare() {
   cd "$srcdir/${pkgname}-upstream-${pkgver}"
   patch -p0 < "$srcdir/0001-reset-output-on-idle.patch"
+  patch -p0 < "$srcdir/0002-escape-optional-splashsrc-expansion.patch"
 }
 
 build() {