4a568a138840943a69f277951f4b10cf007a0217
566
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 David Heinemeier Hansson
|
4a568a1388 |
Merge pull request #14225 from omacom/fix/agents-usage-display
Fix agent usage resets, stale display, and icon underline alignment |
||
|
David Heinemeier Hansson
|
7f91a8d49e | Show recovery guidance when paused usage has no cache | ||
|
David Heinemeier Hansson
|
6809987892 | Align panel underlines with native bar icons | ||
|
David Heinemeier Hansson
|
d21e5810b1 | Reset elapsed agent usage and show stale ages on hover | ||
|
Omarchybot
|
5c4da02146 |
Merge pull request #7783 from omacom/fix/issue-6952
Keep PwNode objects out of the audio panel's Repeater models |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
18328559b9 |
Keep the Wi-Fi icon steady on OWE transition-mode networks (#14133)
* Keep the Wi-Fi icon steady on OWE transition-mode networks An OWE transition-mode network pairs an open SSID with a hidden "_owetm_" twin on the same BSSID. Between scans NetworkManager reports the in-use access point under the hidden SSID and drops the active profile from the device's AvailableConnections, which is the only place Quickshell builds known networks from. No listed network is then connected, so the bar fell back to the disconnected icon until the next scan brought the open SSID back, flickering on and off while the link stayed up. Fall back to the Wi-Fi device's own connected state when no listed network is connected, and read the in-use access point's strength from nmcli (without a rescan) while the connected network has none of its own. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Discard stale in-use AP reads and key Wi-Fi checks on the device Bump a generation whenever the cached in-use access point strength stops describing the link (leaving Wi-Fi or a device change), and drop any nmcli read started before it, re-reading immediately instead of a full interval later. Key Wi-Fi connectivity checks on the device rather than the SSID, so the listed network coming and going with each scan on an OWE transition-mode network no longer schedules a check. A real network switch still passes through "disconnected". Add a QML fixture that runs the panel against a mocked device through the scan churn, a mid-read disconnect, and a final disconnect. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
Bjarne Oeverli
|
e5663c7e3a | Keep image picker previews sharp on HiDPI displays | ||
|
Ric Lewis
|
a8e09b9ce2 | Keep refreshed image picker selection inside the active filter | ||
|
Ric Lewis
|
2ba1015ef2 | Keep image picker work bounded for large theme collections | ||
|
+14
|
75250d37ac |
Fix Codex limits, Claude counting, and agent usage reliability from community PRs (#14049)
* Read Codex app-server replies from the raw fd (#13703) * Resolve Codex through mise which instead of running the lazy launcher (#13109) * Skip the Codex app-server probe when there are no credentials (#13106) Adapted: credentials are checked in the home being probed rather than in the CODEX_HOME environment variable, since each registered account is probed in its own home, so a signed-out secondary account isn't hidden behind the primary's login. A home without credentials reports "Waiting for auth" like any other signed-out home. The credentials store setting is read with tomllib, so a single-quoted value counts too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show the Codex CLI's own error when its app-server dies (#8977) Detect an app-server that exits or stops answering, and report the end of its stderr instead of a bare RPC method name. Rebased onto the raw-fd reply reader; the switch from "-a on-request" to "-a never" is left out, keeping the current approval flags. * Count pi sessions when HOME is a git checkout (#13209) * Count only OpenAI-backed native sessions as Codex usage (#12032) * Deduplicate Pi usage across forked sessions (#8602) * Skip unchanged native Codex token snapshots (#10531) * Count omp and pi profile sessions in the agent usage collectors (#9546) `omp --profile=<name>` (and pi's equivalent) relocates the whole agent tree under <base>/profiles/<name>/. The Claude and Codex collectors only ever scanned <base>/agent/sessions, so a subscription driven entirely through a profile was invisible to the agents panel: no tokens by day, no tokens by model, no prompt or session counts. Discover the profile roots alongside the default one. Sessions are keyed by file path, so a profile adds sessions instead of double-counting the default root, and a missing or unreadable profiles directory leaves the existing behavior untouched. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014zFbJcDEEpV5BAmsH6kAB3 * Skip unrelated Codex session lines before JSON parsing (#12803) Adapted: session_meta lines also pass the pre-filter, since the provider filter from #12032 reads them to skip rollouts served by a non-OpenAI provider. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Read only the Codex session files that changed since the last scan (#12595) Native Codex rollouts keep per-file totals between runs, replayed while a file's mtime and size are unchanged. Rebased onto the session_meta provider filter, snapshot dedup, and line pre-filter, which now live in the per-file reader. pi and omp sessions are left out of the per-file cache: a forked pi session repeats its parent's messages, so they are deduplicated across the whole tree on every scan. * Count streamed Claude messages by their highest-output usage line (#10606) Claude Code writes a streamed assistant response as several transcript lines that share one message id, one per content block. Each line carries a usage object. The first line's output_tokens is a placeholder, often 1, and the last line has the real count. Input and cache fields usually match across the lines. The scanner dedupes by message id and keeps the first line it sees, so it under-counts output tokens. On a machine with 2,577 transcripts it reported 39.0M output tokens against 60.1M used, a 35% shortfall. Input and both cache fields differed by under 0.01%. Keep the line with the highest output count, with the last one scanned winning a tie. The whole line is kept because a response can fall back to another model mid-stream. Those lines are separate snapshots with different cache figures and a different model, and taking a maximum per field across them over-counts cache tokens and credits the wrong model. The zero-usage check now runs before dedup, so a zero-usage first line no longer claims a message id and hides a later line with real usage. Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com> Co-authored-by: GPT-6 Astra <noreply@openai.com> * Index Claude transcripts so the agents refresh reads only what was appended (#8313) omarchy-agent-usage-claude re-parsed every line of every transcript under ~/.claude/projects on each refresh: no mtime cutoff, no memory of the last pass. The agents widget is on by default and ticks every 15 minutes, so the cost grew for the life of the machine. After one month here that was 803 files, 640 MB, 127k lines and 57k JSON parses per tick, about 1 core-second, pushed through the page cache every quarter hour forever. Keep a per-file index next to the scan cache: the unique usage records already parsed out of each transcript and the byte offset they end at. A file whose size and mtime match is not opened; a file that grew is read from the stored offset; a file that shrank or was rewritten is read from the start. --force drops the index and rescans from scratch. The summary is built from the indexed records in the same directory order the walk always used. That matters: when a resumed session carries earlier messages, the same message id appears in two files with different usage, and the first file visited wins. 91 ids differed on this machine; sorting the walk moved one model's output total by 25k tokens. Output is now byte-identical to the previous scan on a frozen copy of the corpus, cold, warm, and after an append. Warm refresh: 1.0 s -> 0.10 s of CPU, of which the scan itself is 70 ms; the index for this corpus is 2.9 MB. Adapted: - Rebased onto #10606: the highest-output rule for streamed messages now lives where the index parses records, and decides between files too. - The index records the timezone it was written in, and a change rereads every transcript, since its records hold local days. - A file only counts as appended to when its inode and the hash of what was already read still match, so a transcript replaced by a larger one, or rewritten in place, is read from the start. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Label a Claude Team seat by its subscription, not its rate-limit tier (#11109) The collector built the plan label from the OAuth rateLimitTier first, so a Team premium seat, which runs on default_claude_max_5x, showed in the agents panel as "Max 5x". Lead with subscriptionType and keep the multiplier as its qualifier: Max still reads "Max 5x", a Team seat reads "Team 5x". Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Label the Claude plan from the profile the CLI refreshes (#7225) Adapted: the profile is found the same way current_account_id() finds it, now shared as profile_path(): ~/.claude.json for the default home, the home's own .claude.json otherwise. The original fell back to ~/.claude.json for any home without CLAUDE_CONFIG_DIR set, so a secondary account read the primary's tier. The profile's tier also keeps the subscription in the label, so a Team seat stays "Team" (#11109). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Call a lapsed Claude access token paused, not signed out (#8093) * Refresh Claude usage after the clock moves backwards (#9956) * Bound unreadable Claude transcript warnings (#12414) * Count Claude usage from opencode v2 sessions (#13894) * Reload agent usage records when an inotify watch fails to rearm (#10067) * Reload agent usage records after each update run instead of on a timer Rather than #10067's two-minute timer per record, reload every record when the omarchy-agent-usage-update process exits, the moment its files can have been replaced. A reload that finds a file unchanged keeps its record, so the panel isn't stirred up by identical data. The grep test now runs the QML functions. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show the agent status when the trouble line has no help text (#8497) * Clear stale agent login guidance after a successful probe (#8892) * Clear the Grok login hint after a successful probe #8892 cleared the default login hint after a successful probe in the Claude and Codex collectors; Grok's collector had the same stale hint. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Read Fireworks credentials from pi's auth.json (#7455) The Fireworks collector skipped pi, Omarchy's default agent, when walking its credential ladder, so a machine signed in to Fireworks only through pi (/login fireworks) never showed the tab. Insert the key pi stores in $PI_CODING_AGENT_DIR/auth.json (default ~/.pi/agent) between the firectl auth.ini and the opencode fallback. pi keys can be literals, $ENV_VAR/${ENV_VAR} references, or !command shell lookups. The collector resolves the first two; command lookups stay pi-only and are skipped rather than sent to the API verbatim. * Call a lapsed Grok access token paused, not signed out Grok's access token lives six hours and Grok mints a new one from its refresh token whenever it starts, so a lapsed one is routine. Reporting it as an expired sign-in made the panel offer Sign-in required several times a day, sending people through grok login for nothing. With a refresh token present it now reads as paused, like Claude's. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep showing Grok's last limits while it sits idle While Grok hasn't run, nothing on the machine has spent its allowance, so with a refresh token on hand the last numbers still stand: they show as current rather than dimmed under a status line. A weekly window that reset in the meantime starts over at 0%, a whole number of weeks on. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Ask for a Grok sign-in once its refresh token is past 30 days A refresh token older than Grok's 30-day sign-in can't renew anything, so the panel offers Sign-in required again instead of showing the last limits as current. With nothing cached yet it says to start Grok, rather than showing an empty section without a word. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Check both ends of what the Claude index read before resuming a transcript A transcript rewritten in place could grow and change only after its first kilobytes, and the index took it for an append. It now compares the last kilobytes before the resume point too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Simplify the agent usage collectors - Codex: pass the forced-scan choice down instead of a module global, make the per-file reader's cache arguments required, shrink the cache record check, and drop guards for shapes that can't occur: an empty launcher path, realpath raising, mise itself being a lazy launcher, multi-line `mise which` output, and probing without a temp file for stderr. - Claude: decide an append by the digest of both ends of what was read alone; the inode and mtime checks it made redundant are gone. - Snapshot: the device id falls back to the hostname, which always exists. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Share fixture setup in the agent usage scanner tests Every fixture home lives under one scratch directory with a single cleanup trap, instead of a trap rewritten with a longer list for each new home, and the Codex test builds its signed-in homes with one helper. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Treat a replaced Claude transcript as new even when its ends match Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Probe Codex without its error text when there's no temporary space Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: tossbaws <17258053+tossbaws@users.noreply.github.com> Co-authored-by: surim0n <suritech@gmail.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: anonwurcod <anonwurcod@proton.me> Co-authored-by: Kevin Rajan <7121943+kvnloo@users.noreply.github.com> Co-authored-by: Nate Ashby <nate.ashby11@gmail.com> Co-authored-by: Aris Gysel <aris.gysel@me.com> Co-authored-by: Brams <76213579+Brams-s@users.noreply.github.com> Co-authored-by: This_Is_NPC <gabrielfollone27@gmail.com> Co-authored-by: sanjyay <102979855+sanjyay@users.noreply.github.com> Co-authored-by: PapistProtocol <12738904+PapistProtocol@users.noreply.github.com> Co-authored-by: steez <stevedimakos97@gmail.com> Co-authored-by: GPT-6 Astra <noreply@openai.com> Co-authored-by: Ryan Yogan <ryanyogan@gmail.com> Co-authored-by: Oli Denton <41393837+omdenton@users.noreply.github.com> Co-authored-by: Igor Kramar <i@ikramar.ru> Co-authored-by: Martin Eidensten <martin@meibe.se> Co-authored-by: Romain Perron <rdj.perron@gmail.com> Co-authored-by: Omarchy Contributor <contributor@users.noreply.github.com> Co-authored-by: manuaudio <manu@arimaka.com> Co-authored-by: Tyler South <tsouth2@gmail.com> Co-authored-by: whathek <Hek846@users.noreply.github.com> Co-authored-by: Ty Richards <me@tyrichards.com> |
||
|
|
821ae58905 |
Reorder the agents in the panel, count Grok's tokens, and install Grok through mise (#14004)
* Let the agents in the panel be put in any order Drag an agent by its mark to move its section; the header it will land on lights up, and the move happens on release. Each agent's header is now a keyboard stop with its own highlight, and Ctrl+Up/Down moves the agent the cursor is in. The order is kept in agents/order.json beside the usage records. The key catcher turns Ctrl+Up/Down into a reorder only for panels that opt in. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Light only an agent's mark when the cursor or a drag is on it The mark is the handle the agent moves by, so the keyboard cursor and the drop spot while dragging box it alone rather than the header line. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep a lit agent mark's box from being clipped at the panel's edge The box overhangs the content's left edge, which the scrolling area clipped. The scrolling area now reaches a little into the panel's padding with the content shifted back, so nothing moves and the box draws whole. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reuse a Grok session scan only on the day it was made A limits-only refresh just after midnight reused a scan from the evening before, which counted yesterday's sessions as today's. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep Ctrl+Up/Down from moving an agent when the cursor is outside one The hero's buttons and the starter tiles carry indices too, and the lookup read them as accounts, so with several accounts Ctrl+Up/Down on one of them moved an unrelated agent. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Report a failed mise update even after the Grok upkeep runs The Grok block ran after `mise up` and its last command set the script's status, so a failed tool update could read as a success to callers that warn about it. The update's own status is now the script's. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Unpack a Grok update into ~/.grok whatever GROK_HOME says The upkeep replaces ~/.grok's link, but the npm launcher unpacks into GROK_HOME when it's set, so with a custom home the link never came back at the new release and the old one was restored. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Hold off reordering agents while an account name is being edited Ctrl+Up/Down reached the key catcher during an inline rename, and moving the agent rebuilt its section, dropping the unfinished name. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Install Grok through mise's first-party package The npm launcher keeps an old ~/.grok/bin binary because mise skips its postinstall. Use mise's grok tool, and drop the npm tool so its shim does not stay ahead of the stub. * Drop the npm Grok workarounds now that mise installs Grok itself With Grok installed through mise's first-party package, the CLI is the binary mise manages, so the update upkeep that repointed ~/.grok/bin and the shared bin directory for added Grok accounts have nothing left to do. omarchy-update-mise is back to running mise up and nothing else, and adding a first Grok account installs the same package. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Count Grok's tokens and prompts from its usage ledger Each Grok session keeps a usage.json, the ledger `grok usage` prints, with every finished turn's end time and tokens by model. The collector now reads it for tokens today, by day for the last week, and by model, with cached input kept apart, and counts today's prompts by the turns that ended today. Found in #12352's research. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Count cache writes in Grok's daily token totals Grok's totalTokens leaves cache writes out while the per-model buckets count them, so a turn with cache writes added less to its day than to its model. The day's total is now the sum of those same buckets. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Remove the npm launcher's old Grok binaries when moving to mise's Grok Omarchy's npm wrapper ran the binary the launcher unpacked into ~/.grok/bin, where x.ai's installer also puts a copy with a PATH entry ahead of mise. Once the wrapper is replaced, a binary left there would keep shadowing the mise tool, so the migration removes it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Jesse Miller <jmiller@jmiller.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
f45461a38f |
Bring Grok up to par with Claude and Codex in the agents panel (#13992)
* Let Grok updates through mise take effect Grok's npm launcher runs ~/.grok/bin/grok whenever it exists, and the install script that repoints it at a new release doesn't run under mise, so every machine kept running the release it first unpacked. Updating mise tools now drops a link to an older release and the old binary, and lets the launcher unpack the installed one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep several Grok accounts, the way Claude and Codex do Grok honors GROK_HOME, so an added Grok account gets its own home holding only its login and settings cache, with the CLI binary, sessions, skills, plugins, memory, and config linked back to ~/.grok. The account commands, the add flow (a second account signs in through a private window), the launcher, and a grok shell function all take it like the others, and its identity and plan come from the files Grok writes at login. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show Grok's plan and credits in the agents panel A grok collector reads each account's plan from the settings Grok caches and its credits from the endpoint behind Grok's own /usage view, so Grok gets a section, per-account limits, and autoswitch like Claude and Codex. A signed-in agent with a plan now shows before its first numbers, so a lapsed sign-in has somewhere to say so. Grok's mark joins the assets, and with every agent able to take another account the add screen no longer needs to dim one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Document Grok accounts and limits alongside Claude and Codex Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Read Grok's credits the way xAI actually answers The answer nests under config, names a weekly period with its end, and as protobuf JSON leaves the usage percentage out while it's zero. The collector now reads that shape, so a fresh week shows as 0% until it resets rather than as nothing known. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Count Grok's prompts and sessions from its session summaries Grok keeps a summary beside each session with when it was last active and how many prompts it had, so its section and the hero's summary get today's prompts and sessions and its active days. It records no token counts there, so none are claimed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Give each Grok limits cache write its own temporary file Two overlapping collector runs wrote the same cache through one .tmp path, so one rename could leave the other's failing and its record not updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Read a single Grok account from GROK_HOME when it's set The launcher and the CLI honor GROK_HOME, but the collector always read ~/.grok, so a Grok signed in only in a custom home showed nothing. With one account, the collector now reads the home the CLI would; with several registered, the primary stays ~/.grok. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop guesses the real Grok credits answer made unnecessary The collector carried fallbacks for fields and shapes guessed from the binary before xAI's actual answer was seen, a numeric timestamp branch nothing writes, the panel's default for prompt stats, and guards that an empty sign-in already covers. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the working Grok release until its update is in place The update dropped the link and older binaries before the new release was unpacked and ignored a failed unpack, which could leave every Grok account without a CLI. The old release now stays until the new one is linked, and its link comes back if it never is. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Count only Grok sessions for today, not prompts A session's summary holds all its prompts and only when it was last active, so a resumed session put its whole history on today. Today now counts the sessions active in it; prompts stay an all-time total. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reuse the Grok session scan on a limits-only refresh Opening the panel and near-limit checks only need fresh limits, so they reuse a scan up to 15 minutes old, as the Codex collector does; --force still rescans. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
c05d90196f |
Switch between several Claude and Codex subscriptions, and build apps the Omarchy way (#13770)
* Plan multiple Claude and Codex accounts with manual or automatic switching Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep several Claude and Codex accounts and start new sessions as the active one Each added account gets its own home holding only its login, with history, settings and skills linked back to ~/.claude or ~/.codex so --continue works across a switch. Accounts are added through the CLI's own login, and cx, cy, plain claude/codex and omarchy-agent all start as the active account unless CLAUDE_CONFIG_DIR or CODEX_HOME is already set. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Report limits for every Claude and Codex account in the usage records Each registered account is probed with its own sign-in and cached on its own, and a parked account whose sign-in lapsed keeps its last-known numbers marked stale. The record's top-level limits keep describing the active account. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Switch accounts automatically near a limit, or notify with a one-click switch After each usage update, an active account at or over its provider's threshold (95% by default) moves new sessions to the account with the most headroom in auto mode, or offers that switch as a notification in manual mode. It never flaps back to an account that just reset, and says once when every account is over. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show every subscription account's limits in the agents panel With several Claude or Codex accounts, the limits become one card per account with the active one badged. Pick a card with its number and press Enter (or click Use) to move new sessions to it, press a to add an account, and m to toggle automatic switching. Limits refresh every minute while an active account is above 80%. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add Setup > Agent Accounts to list, switch and add Claude and Codex accounts Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Document switching between several Claude and Codex subscriptions Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Count a rested parked account as available, and pin Main to its own home A parked Claude account whose windows all reset now reads as 0% instead of unknown, so switching can pick it. Main's Codex limits come from ~/.codex even when CODEX_HOME is set, and duplicate logins are checked against who each home is signed in as now. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Key limits caches by subscription and report when an account truly frees up An added account's limits cache follows its account id, so a new account reusing a removed one's label never inherits its allowance. The all-accounts notice now names when an account's blocking windows have all reset, not the earliest reset of any window. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep account ids clear of routing keywords and refresh the panel after removal Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Share Codex plugins and hooks across accounts, and key Claude caches by current sign-in Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop the key hint from the Add account button Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sign new agent accounts in through a private browser window The main browser is almost certainly signed in to the account you already have, and the login would silently reuse it. Both CLIs open their login page through $BROWSER, so it now points at omarchy-launch-browser --private. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let agent account commands default to your default agent's provider With Claude or Codex as the default agent, the provider can be left out: omarchy agent account use work, and primary names the primary account. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop the primary alias, which shadowed an account named Primary Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Replace the auto switch button with a small Notify / Autoswitch toggle Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add accounts from a small + beside the switch toggle Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fix the punctuation of the switch toggle's README line Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop the border around the add account + Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Rename Claude and Codex accounts without moving their homes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Lay out agent accounts on accent rails instead of boxed cards The active account gets an accent rail and the others a quiet one, each window is a single compact line, and the switch toggle, add, and Use are text. Clicking an account's name renames it in place. A window without a reset time no longer leaves an empty line, and last-known numbers are only red when the sign-in needs attention. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Read Codex limits without waiting on account/read Codex 0.158's app-server can leave account/read unanswered, and asking it first lost the limits whenever it did, leaving the agents panel showing "Codex limits unavailable". The limits name the plan themselves, so they're asked first and account/read is only a short fallback when they don't. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Switch agent providers from their marks in the panel header The row of provider buttons gives way to a small mark per provider in the hero's corner, the selected one at full strength, with the add account + beside them in place of the + by the switch toggle and the full-width Add account button. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the agents panel's scrollbar off its contents The panel's content narrows to leave the scrollbar its own strip whenever it scrolls, and the add account + leads the provider marks instead of sitting at the very edge. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add Claude, Codex, or Grok subscriptions from one Add Account menu The first account for a provider installs its CLI if needed and signs in to the CLI's own home through the normal browser; only additional accounts get a home of their own and a private window. Grok signs in its first account. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reveal Autoswitch beside Use instead of a Notify / Autoswitch row The panel's + now opens the Add Account menu for any provider. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Split agent accounts with plain separators instead of rails ACTIVE already marks the account new sessions use. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Only call Claude limits stale once they're old, and poll near a limit less Anthropic rate-limits its usage endpoint, and polling two accounts every minute near a limit got every re-check refused, so both accounts read "Last known" with numbers a minute old. A refused check of numbers under 15 minutes old now counts as current, older ones say how old they are, and near-limit polling is every three minutes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show every agent's limits on one page under an Agents hero The panel stops switching between one provider at a time and lists every agent and account with its limits, dropping the tokens-by-day and by-model charts. The hero carries the agents robot and rotates through what the token counts add up to: tokens this week and today, the most used model, the busiest day, and today's prompts and sessions. Middle-clicking the bar icon refreshes, since there's no provider left to advance to. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Report Codex's free rate-limit resets in its usage record Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Give the agents panel more room, and show Codex's free resets Limit lines are a notch larger with more space between them, each account's limits sit a clear step below its name, and sections breathe. Codex has one limit on Pro, so its section now also says how many free full resets are waiting and when the next one lapses. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Mark Claude's Fable limit on the Weekly meter instead of its own row A model-scoped allowance on the same clock as a base window is drawn as a tick on that window's meter and named in the row's tooltip. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let omarchy-default-agent set the default without launching it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let the agents panel drive adding an account without a terminal --check says whether adding one now would be each provider's first sign-in or an additional account, and --events reports progress as tagged lines alongside the CLI's own output, notifies with the result, and cleans up the login and its scratch home when cancelled. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add subscriptions and pick the default agent right in the agents panel The + is a proper accent button, and it swaps the list for a picker of Claude, Codex, and Grok that signs in without a terminal: name a further account, then follow the sign-in with its status, Grok's confirmation code, a field for Claude's pasted code, and a link to reopen the page. A dropdown at the bottom sets the default agent without launching it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Draw the Fable tick in its meter's own color Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Revert "Let omarchy-default-agent set the default without launching it" This reverts commit da96261f7d26bb76774cbdc1cb9e0abde92bb841. * Make the first agent signed in the default when none is picked Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the agents panel in the bar, with setup, starters, and adding in it A machine with no agent opens the panel on setting one up. Once set up, the list ends with starter prompts for a new theme, plugin, or app, and a quiet Add a subscription. The panel no longer sets the default agent, and the hero drops its add button. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Offer the starter prompts as tiles, and adding as a row beneath them Theme, Plugin, and App each get a tile with its glyph, and Add a subscription a matching row with the + in a tinted square. The panel is allowed to grow tall enough to show it all without scrolling. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Put the tinted add button in the agents panel's hero corner Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show when a limit resets in small type under its meter The percentage keeps the right edge to itself, so the meter runs longer. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Revert "Show when a limit resets in small type under its meter" This reverts commit 108d9de59da1af12cddbf232b0b5333ad8994c64. * Put each account's plan beside its name, and its email in a tooltip Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Stack each limit's percentage over its time left, so the meter runs longer Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show only each limit's time left, with the exact percentage on hover The meter already says how full a window is. Dropping the percentage beside it leaves one calm figure per row, and the row's tooltip carries the number. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sign an existing account in again with omarchy-agent-account-add --reauth It signs in where the account already lives: the CLI's own home (:primary) through the normal browser, an added one through a private window. The usage records now say which account is the primary. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Offer Sign-in required in the agents panel instead of how old the numbers are A lapsed sign-in shows as a link that signs that account in again right in the panel. The "as of" and "last known" notes are gone; trouble that isn't about signing in still shows as text. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the separator dot out of the Sign-in required link Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop the Setup > Agent Accounts menu and the stale plan The agents panel now lists, switches, and adds accounts, so the menu's duplicate of it goes, and the plan written before the design settled no longer describes it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Install the compiler and Qt pieces for building Omarchy-style apps base-devel plus qt6-base, qt6-declarative, qt6-multimedia, and qt6-wayland, which is what Hype, Monologue, and Omacut build with through qmake6 and make. Qt was only there as a dependency of those apps, and the compiler not at all. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Add an omarchy-app agent skill for building apps the Omarchy way It teaches how Hype, Monologue, and Omacut are built: C++ and Qt Quick in one flat project, qmake6 and make into a single binary, a theme that follows Omarchy's accent live, portal dialogs, keyboard-first conventions, Qt Test offscreen, and a PKGBUILD that puts the app in the launcher, with starter files that build and pass their tests as written. The agents panel's App starter uses it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Link the omarchy-app skill on existing installs Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let Cancel stop a waiting login, and list a lone account's limits Bash holds a trap until the foreground command finishes, so a login waiting on the browser outlived Cancel. It now runs behind an interruptible wait. With one account the usage record keeps its limits at the top level, which omarchy agent account list now reads for the primary. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Re-read identity even when signed out, and count Grok as set up A home whose login is gone no longer keeps the identity the registry saved, so it reads as signed out and can be added again. The agents panel leaves its setup screen once any agent is signed in, not only once one has usage to show, since Grok has no usage collector. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Save each account's current identity before collecting usage A home signed in to someone else since it was added kept the old email in the registry, which the usage records name accounts by. The usage update now refreshes the registry from each home first. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Offer Claude's paste field from the start, and keep providers with accounts Claude's login prompts for a pasted code without a newline, so the panel's line reader never saw it; the field is simply there for Claude sign-ins. A provider with accounts stays listed even when the active one's limits are unavailable, so its other accounts can still be switched to. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Never autoswitch to a signed-out account, and report Codex's missing sign-in An account nobody is signed in to is left out of switching, however much room its cached numbers show. Codex answers a home without a login with an error, which now reads as Waiting for auth, so the panel offers Sign-in required for Codex accounts too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Link shared files before they exist, and only call every account over when it is A shared file the primary home didn't have yet was left unlinked, so an added account made its own copy and the two diverged for good; it's linked up front now, and written in the primary home by whichever account writes it first. The all-accounts-over notice waits until every account's limits are actually known. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Make the agent starter tiles compact and call the section Make something cool Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Hold the agents hero line until its next fade Every usage record that landed rebuilt the summary phrases, and the hero indexed that live list, so opening the panel could swap the line several times between fades. It now keeps what it shows until the timed swap. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Start the default agent from the agents panel hero A console button beside the add button runs the same launcher as the right click: the default agent, or the picker when none is set. It hides while adding a subscription, where the add button becomes the way back. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Put the add button before the agent launcher in the hero corner Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Bring keyboard navigation back to the agents panel The one-page redesign dropped left and right with the per-agent pages, leaving the arrows only to scroll. They now walk everything that does something, row by row: the hero's add and launch buttons, each switchable account, and the starter tiles. Enter acts on the cursor, the cursor scrolls into view, and hovering moves the same cursor so only one thing is lit. Number keys still jump to an account. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let adding an account take over the agents hero While adding, the hero's line reads "Add an account" in place of the rotating summary, and the X in its corner is the only way back, so the add view drops its own title and Back link. Each agent to add is just its mark and name; one that can't be added is dimmed and says why on hover. The arrows walk that list too, and Enter picks one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show the agents to add as large marks, three across Each agent is a large mark over its name with no box around it, in one row the arrows move along. The chosen one turns accent and grows a touch. The reason an agent can't be added is shortened to fit inside the panel. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Move between Autoswitch and Use on an account with the arrows An account that isn't active is now two stops, Autoswitch then Use, so left and right move between them and Enter acts on the one that's lit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Land on Use when moving up or down onto an account Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Hide Use on an autoswitching account until you're on its line With Autoswitch on, the line shows only Autoswitch. Use appears when the line is hovered anywhere or the keyboard is on it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Start adding an account with the first agent focused Opening the add screen puts the keyboard cursor on the first agent, so Enter picks it straight away. A focused agent lights up even before the check says whether it can be added. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop the Sign in link under the account name field Enter in the field already starts the sign-in. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Key the primary Claude account's limits cache by its subscription The primary home always used claude-limits.json, so signing it in to another subscription could carry the old one's numbers over when the first probe failed, and autoswitch would act on them. Once the home says who it's signed in as, its cache is keyed by that like every other account's. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Leave Qt Multimedia out of the base packages again Quattro dropped it once the shell no longer needed it, and the app skill already has an app that plays audio or video add it and list it in its own depends. The compiler and the rest of Qt stay. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Render the agents panel's dynamic text as plain text Sign-in status, help text, and provider names come from outside the shell, so none of them should be read as markup. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep an account's plan and trouble clear of its Use and Autoswitch links The details beside an account's name grew to their full width, so a long plan or warning could run under the links on the right. They now shorten with an ellipsis instead, and Sign-in required keeps its whole width. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Let primary name the first account, as the manual says `omarchy agent account rename primary Hey` was documented but failed, since the primary account's id is main and lookups took exact ids only. primary now reaches the account marked primary, whatever it's been renamed to, and no new account can take primary as its id. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Install everything an Omarchy app needs by default The app skill builds with Qt Multimedia, SVG icons, and ffmpeg as well as the compiler and the rest of Qt, so qt6-multimedia, qt6-svg, and ffmpeg join the base packages and the migration. The shell still plays no video through Qt Multimedia, which is what its test now checks. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Dim agent limits kept from an earlier check, with their age on hover When a Claude probe fails, the last numbers carry on and looked just like fresh ones. Those meters now dim, and their tooltip says how old they are. The record carries limitsStale and limitsFetchedAt for this. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Give the app skill templates for every file its build needs The templates named src/backend.{h,cpp} and a test file without showing them, so each app had to invent its own. They're now templated, with a starter icon, a note that LICENSE and the icon must exist for package(), and qt6-wayland in the PKGBUILD's depends. Scaffolded from the templates alone, the app builds and its tests pass. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Start the agents panel cursor over when the agent list comes or goes Right after the shell starts, the panel can briefly look like a first setup and focus the first agent to add. When the records land the rows change under the cursor, which then lit an account nobody had picked. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop dead hover and limit checks from the agents panel The tiles and hero buttons fell back on their own hover when there were no keyboard rows, but the hero always has one, so hover only ever moves the cursor. Stale meters only exist when there are limits, so neither the panel nor the record needs to check for some. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drop the a hotkey for adding an agent subscription The + in the hero is the way in, by mouse or by arrowing to it. The plugin README also catches up with the panel: the launcher, dimmed stale limits, the new add screen, and the arrows walking a cursor rather than scrolling. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * List a command family that sits under a flags-only command `omarchy agent account` reached omarchy-agent, which takes only flags, and failed on the word instead of listing the account commands. When the command matched so far takes only flags and the next word names visible commands, the router now lists them. `omarchy update aur` likewise lists the update aur commands rather than running a full update. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Refuse to remove an agent account a running session uses Removing an account deleted its home at once, pulling the login out from under any session started in it, though running sessions are never meant to be touched. It now says to quit that session first. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Prefer an account checked just now when switching near a limit Autoswitch weighed numbers kept from an earlier check like fresh ones. A parked account's sign-in lapses within hours, so a stale one stays a candidate, but an account checked just now wins over it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Leave a user's own omarchy-app skill in place when linking ours Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reach Sign-in required with the keyboard in the agents panel Both the link on a lapsed account and the one on a single-account agent are now stops in the cursor's walk, and Enter signs in again. A picked link scrolls into view. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Bring the manual's agent accounts paragraph up to date Near-limit checks run every three minutes, not every minute, and Autoswitch now appears on hovering an account's line and takes Use's place while it's on. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the agents panel cursor on things you can act on The active account was a stop with nothing to do, so the cursor seemed to vanish there. It now only stops on it to sign in again. The hero's buttons also show the cursor plainly, with an accent border and a deeper tint instead of a shade's difference. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Never leave an added agent account's login outside the registry Registering moved the login into its home before carrying settings over and saving the registry, so a failure in either stranded a home holding a sign-in that the account commands couldn't see. Settings are now carried while the login is still pending, and a failed save moves the home back there for the add command to clean up. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Put room before freshness when picking an account to switch to Preferring accounts checked just now outright could pick a fresh one at 94% over a stale one at 10%. An account within 15 points of the threshold now counts as near its limit however fresh, so accounts with room come first and freshness only decides among them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Check agent limits more often relative to the switch threshold Faster checks started at a fixed 80%, so a threshold set lower could be crossed and wait out the 15-minute interval. They now start 15 points below the threshold, which is still 80% at the default 95%. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
a383e3efcb |
Say what nodeFor resolves a row to after PipeWire recreates its node
Co-Authored-By: Codex Medium <noreply@openai.com> Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
b18ab4952b |
Add a no-animations mode, on by default in VMs (#13550)
A machine without a GPU, like most VMs, renders through llvmpipe on the CPU, where every animated frame and every translucent window costs. In a VM, opening and closing a terminal took ~5s of CPU; a panel ~3.4s. omarchy toggle animations (also under Toggle > Animations) places a Hyprland flag that turns off animations, blur and shadows and makes windows opaque. The shell follows Hyprland's animations:enabled, rereading it on every config reload: its one-shot animations run for Style.duration(ms), which is then 0, and its spinners, pulses and title marquee hold still. A new install in a VM starts with the flag in place. Measured in the ISO test VM (llvmpipe), CPU per interaction: terminal open+close 5000ms -> 481ms, workspace switch 1670ms -> 409ms, audio panel 3446ms -> 796ms, volume OSD 2324ms -> 584ms, menu 2028ms -> 1241ms. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
de63134b88 |
Collapse identical notifications from the same sender into one toast (#13522)
* Collapse identical notifications from the same sender into one toast A web app open in several tabs fires one notification per tab for a single reminder, stacking identical toasts. A new notification matching an on-screen toast's app, summary, and body now replaces it like a replaces_id update. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Only collapse live duplicates that share image and click target Screen recording toasts share text but preview and open different files, and replayed history rows share images with entries still in history. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Compare a notification's current content when collapsing duplicates A replaces_id update can land while the insert is deferred, so the initial snapshot may no longer describe what the notification says. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
349ecc09a2 |
Flip Elsewhen between Fahrenheit and Celsius with Alt+T (#13450)
* Flip Elsewhen between Fahrenheit and Celsius with Shift+T Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Flip Elsewhen's temperature units with Alt+T instead of Shift+T PanelKeyCatcher's textKey now carries the held modifiers, which is how the panel tells Alt+T from T. Existing handlers take only the text and are unaffected. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
ed5837a05b |
Give the picked Elsewhen city one bright highlight (#13452)
A row lit itself by lifting its own time-of-day fill, so a picked night row could read darker than the daytime rows around it. The picked city now takes midday's lifted fill, the brightest, whatever its time of day; hover still lifts each row from its own. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
25f9795221 |
Flip Elsewhen's time format with t and line up its weather (#13448)
* Flip Elsewhen between 24-hour and AM/PM time with t Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Line up Elsewhen's weather in one column The temperature and weather icon sat against each row's time, which is narrower for "4:06" than "10:06", and shared the name's slack. The time column now takes the widest time's width in every row, and a spacer holds the weather against it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
773e19e145 |
Drive Elsewhen from the keyboard and summon it with Super+Ctrl+Alt+E (#13445)
* Navigate Elsewhen from the keyboard and summon it with Super+Ctrl+Alt+E Up and down walk home and the cities, lighting the picked row and turning the globe to it. Left and right move the clocks an hour, held until Escape or close. Escape now clears a shifted time before leaving the globe. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reach Add a city from the keyboard and shift time past a day Down past the last city selects Add a city, where Return or Space opens the search. The arrow keys no longer stop at twelve hours, and shifts past a day read in days. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Delete the picked Elsewhen city from the keyboard Delete (or x) removes the picked city and moves the cursor to the one that takes its place. The picked row shows its × so the target is plain. Delete now reaches every panel's deleteRequested, as it already does in the clipboard and the menu. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Center bar glyphs on the open-panel underline The 16px icon canvas in the 27px slot was snapped from 5.5 to 6, and the glyph's fractional centering correction was snapped too, so glyphs sat up to 0.9px right of the underline, which centers on the slot. Both are now placed exactly, and the geometry test measures against the slot to within 0.05px. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
82979b9a18 |
Remove the IPC socket of each shell a test starts (#13443)
* Answer the Elsewhen panel over the shell's IPC socket The Elsewhen panel arrived with a plain IpcHandler, so omarchy-shell reached it only through the slower qs ipc fallback, and the test that every first-party handler registers as ShellIpc failed on quattro. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Remove the IPC socket of each shell a test starts The runtime smoke and screenshot sanity tests start the real shell from a temporary copy and kill it, which leaves its IPC socket behind in XDG_RUNTIME_DIR. A session that runs the suite a few times collected dozens of them. base-test.sh gains shell_ipc_socket, which derives a shell's socket as omarchy-shell does, and both tests remove theirs in cleanup. The socket test derives its fixture's socket through it too, so the helper cannot drift from omarchy-shell. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5929a9b80c |
Set Elsewhen's here by tapping a city on the globe (#13438)
A city on this machine's zone becomes homeCity, the zone's own city clears it, and a city on another zone leaves it alone. Ported from omacom/elsewhen#5. Co-authored-by: Shawn Yeager <shawn@shawnyeager.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
e7218e36f2 |
Move Elsewhen into Omarchy as omarchy.elsewhen (#13429)
* Move Elsewhen into Omarchy as omarchy.elsewhen The world clock ships in the shell tree instead of its own package. A migration renames existing bar entries with their settings and removes the retired package. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Remove Elsewhen's shelved Earth row, overlap band and sky tint Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tidy Elsewhen's models, data helper and docs, and drop currency Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Restructure Elsewhen's panel and globe on the shared shell components Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Show Elsewhen's bar globe upright Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Use the shared city search for Elsewhen's globe jump bar Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep legacy Elsewhen entries single and retry offline geocodes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Fetch Elsewhen's weather with curl instead of a Python helper Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
c231097df7 |
Answer omarchy-shell calls over the shell's own socket (#13435)
* Answer omarchy-shell calls over the shell's own socket Every omarchy-shell call started a qs ipc client, ~45ms of startup for one IPC call: a theme switch makes two, and every script-driven OSD, toggle refresh and lock query paid it too. The shell now serves a socket in XDG_RUNTIME_DIR, named from its config path and Wayland display as qs ipc selects its instance, and omarchy-shell tries it first through socat, which starts in ~5ms. First-party handlers register as ShellIpc, an IpcHandler that qs ipc still reaches, and the socket calls only the functions a handler declares with their exact argument count, allowed by name so QObject methods such as destroy() stay out of reach. When the shell ran nothing it answers SKIP, and omarchy-shell asks qs ipc for its exact answer, so errors, third-party plugins and an unreachable socket behave as before. A call that may have run is never retried: a timeout or a connection closed without an answer reports the shell as not responding. omarchy-shell shell ping takes ~13-18ms instead of ~61ms, and omarchy-osd reaches the screen in ~36ms instead of ~77ms. Output and exit status match the qs ipc path across 26 calls, errors and quiet mode included. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Only accept whole socket replies and retry only unmade connections A reply cut off after its OK prefix passed for the whole answer, and an empty reply with socat failing was retried through qs ipc although the request might already have been delivered. An answer now counts only once its record separator arrived. socat's own errors join the reply, so only its connect error, a socket nothing listens on, falls back to qs ipc beside an explicit SKIP; anything else is reported as not responding rather than retried. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
387fcf599a |
Keep the lock wallpaper decoded so waking shows it with the password field (#13431)
The lock started decoding its wallpaper only once locked, with the cache off, and first at the view's unsized native resolution. A machine suspending right after locking froze that decode partway, so waking showed the password field on a bare background and the wallpaper popped in after it. On this machine the wallpaper took ~208ms to become ready, and the suspend followed the lock by 66ms. The lock service now keeps each screen's lock wallpaper decoded in the image cache, as the lock view requests it: same URL, the screen's logical size, PreserveAspectCrop. The view waits for its size and reads from the cache, so the wallpaper is ready within ~3ms of the lock starting. The version in the cached URL follows the file's mtime and size, so a wallpaper overwritten in place still reloads. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
804749970a |
Handle volume, media and notification keys in the shell (#13424)
* Step the volume in the shell instead of a script per keypress Each volume key ran omarchy-audio-output-volume: several pactl calls in bash, then omarchy-osd delivering the OSD over a qs IPC client, ~165ms from keypress to OSD, on keys that repeat while held. The volume up, down and mute keys now dispatch global shortcuts that the media service handles over PipeWire, stepping, clamping, unmuting and debouncing by the script's rules and showing the same OSD. It acts only when the default sink is an ALSA sink, which is its own physical sink. Any other default, a DSP chain or EasyEffects above all, falls back to the script, which resolves the physical sink from the live routing on every press. The precise +1/-1 keys still run the script. Keypress to OSD drops from ~168ms to ~20ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Run media and notification keys in the shell without an IPC client The media keys and the notification dismiss, invoke and history keys ran omarchy-shell, starting a qs client for one argument-free IPC call. A new ipc shortcut kind names such a call as target.method. The shell hands it to the service that owns the target, which runs its own IpcHandler function, so the key behaves exactly as the omarchy-shell call did. A call missing from the list binds through omarchy-shell. Dismissing a notification with SUPER+comma clears the popup in ~11ms instead of ~40ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
48de7823da |
Keep overlay surfaces mapped so they open sharp (#13419)
The menu, emoji picker, clipboard, OSD, reminder flow and Wi-Fi QR code mapped a fresh surface on every open. Qt drew its first frames before Hyprland sent the surface's fractional scale: the pixel ratio stepped 2, 1, then 1.6, so on a 1.6 display each overlay showed blurry for ~350ms before going sharp. A new OverlayWindow keeps the surface. Hidden, it parks as a 1x1, input-less layer below windows, off the overlay layer so it never blocks direct scanout. Showing only resizes and raises it, so the scale is already settled. Content stays hidden until the surface has grown, so no 1x1 frame is stretched across the screen, and the window follows the focused monitor each time it is shown. The image picker's own fullscreen parking moves onto it too. Each parked overlay keeps a Qt window alive: at rest the shell holds ~40 MiB more RSS and ~20 MiB more GPU memory. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f3dbc464fc |
Decode theme backgrounds earlier, and at screen size (#13408)
* Decode the next theme background while the theme stages The wipe waited 125-290ms after the transition arrived, decoding the new wallpaper. Most stock wallpapers are WebP, which Qt decodes at full size and scales afterwards, so a screen-sized sourceSize does not shorten it. Start the decode earlier instead. omarchy-theme-set chooses the next background and snapshots it before rendering templates, then sends a new background prepare call in the background. The shell loads it into the hidden incoming frame, so the transition finds it decoded. A prepare that arrives after its transition is ignored, and one no transition claims is dropped after five seconds. The wipe now starts ~255ms after omarchy-theme-set begins instead of ~345-490ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Decode the wallpaper at screen size instead of shipped size Wallpapers decoded at the resolution they were shipped at: a 5120x2880 stock wallpaper took 5120x2880 of RGBA on a 1920x1200 panel, and a transition held up to three such frames. Bind sourceSize on the displayed wallpaper and both transition frames to the screen's physical size. PreserveAspectCrop treats it as the area to cover, so the image still fills the screen. Qt scales a decode up as well as down to cover sourceSize, so the native size is read from the file header first with magick identify, and a wallpaper smaller than the screen decodes at its own size. The images wait for both sizes, so nothing decodes at native size first. Ported from #8324 onto BackgroundMedia and the prepared incoming frame. Measured with a 5120x2880 wallpaper, the shell's GPU memory at rest drops from 264 MiB to ~148 MiB. The size probe delays the reveal by ~30ms, which the earlier prepare still more than covers. Co-authored-by: Ryan Yogan <ryanyogan@gmail.com> Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Ryan Yogan <ryanyogan@gmail.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
24f1243120 |
Make the theme picker open instantly (#13403)
* Run menu summon actions in-process A menu action that only summons another shell plugin spawned bash and a qs ipc client to ask this same shell to do it, about 60ms of the path. Call shell.summon directly instead, and fall back to bash when the call is refused or the action is anything more than a bare summon. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Open the theme picker from rows held in the shell Opening the theme picker ran omarchy-theme-switcher to rebuild its index and then made a second IPC call, about 170ms before the picker mapped. The picker now holds the theme rows itself, opens from them at once, and refreshes them behind the open via omarchy-theme-switcher --print-rows. It applies the chosen theme with omarchy-theme-set directly, so omarchy-theme-set no longer preloads the picker. From the keybinding to the overlay mapped drops from ~245ms to ~83ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Keep the image picker surface mapped between opens Each open mapped a fresh surface, which rendered its first frames before Hyprland sent its fractional scale: the pixel ratio stepped 2, 1, then 1.6, so the picker flashed blurry for ~130ms and re-uploaded every thumbnail texture. Keep the surface and park it transparent and input-less on the bottom layer while closed, since anything on the overlay layer blocks direct scanout for fullscreen apps. It follows the focused monitor on each open. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
72648651cd | Preserve shell reference details and repair incoming links | ||
|
David Heinemeier Hansson
|
b423f4993d | Complete OWE service setup and lock feed fallback | ||
|
Bjarne Oeverli
|
eff410f91e |
Draw the lock screen video from the OWE lock feed
The shell drops its own player: BackgroundMedia is image-only, and the lock loads Owe.LockFeedSurface through a Loader, so a system without the module shows no lock video instead of losing the whole lock screen. The feed pauses per output when the panel blanks or power saver turns on. The lock view keeps its still effect path and darkens the feed for legibility. QtMultimedia and the shell video pause policy are gone, and the base package list requires owe and owe-lockfeed instead. |
||
|
Bjarne Oeverli
|
dbebc458db |
Replace the desktop video path with OWE
The desktop background no longer plays videos. OWE owns video backgrounds, and the shell layer stays empty behind one. The shell keeps stills, which OWE hands back to it. Remove the desktop video pause plumbing that only existed to stop an unseen player: the lock, idle, and battery service lookups, the per-output fullscreen check, the first-screen audio opt-in, and the audio output in BackgroundVideo. The lock screen keeps its own silent playback. Update the background tests, the manual, and the package note. |
||
|
Bjarne Oeverli
|
02bb92bc74 | Mark the desktop video path as the no-OWE fallback | ||
|
Bjarne Oeverli
|
d01ef2d5d0 |
Let OWE own video backgrounds while it runs
The background plugin now watches for the OWE daemon socket. While OWE is running, the desktop yields video playback to it and the shell keeps stills. The lock screen keeps its own playback. This lets Omarchy cooperate with OWE without OWE editing shell.json, so the engine can ship as a package. Add a package-list note that owe-wallpaper-engine must be added once it is packaged. |
||
|
David Heinemeier HanssonandClaude Fable 5.1
|
55799c4ab0 |
Poll the active power profile over D-Bus instead of powerprofilesctl
The battery service ran `powerprofilesctl get` every two seconds to keep the active profile visible to the wallpaper and lock services. That command is a PyGObject script, so the shell spawned a Python interpreter for it tens of thousands of times a day. Roughly once a day one of those exits into a CPython 3.14 finalization race (python/cpython#124619): the GLib D-Bus worker thread calls PyGILState_Ensure after the interpreter is torn down and the process dies with SIGSEGV, leaving a core dump and a crash notification behind. Read the ActiveProfile property straight from power-profiles-daemon with busctl, the same way omarchy-powerprofiles-set already reads UPower. The output is JSON, so an empty or malformed reply when the daemon is not running still reads as no active profile, matching the previous behaviour. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_011gbfh4Mi9dK6SAd1P2xMTi |
||
|
Bjarne OeverliandClaude Opus 5
|
6ee7479879 |
Stop the layout widget switching a device nobody types on
Clicking the keyboard layout widget switches one device, chosen by filtering the seat through UNTYPED_KEYBOARDS and then taking whichever survivor sits furthest through the layout list. That filter has to recognise every non-keyboard by name, and a laptop registers far more as a keyboard than it lists. On a Dell XPS 14, Hyprland reports ten keyboards and one of them is a keyboard. The filter catches three of the other nine, leaving vendor hotkey blocks (intel-hid-events, intel-hid-5-button-array, dell-privacy-driver, dell-wmi-hotkeys) and two HID endpoints ahead of at-translated-set-2-keyboard, which sorts last. Every click switches hid-sdw:...-consumer-control instead, so the label cycles convincingly while typing never changes. Device order is stable across polls, so it is deterministic rather than a race, and needs no pre-existing bad state. Switch every keyboard holding the same layout list instead, naming an absolute index. "next" advances each device from wherever it sits, so a seat that has already drifted apart stays drifted and merely inverts; one index converges it in a single click, and a seat in lockstep leaves the reading nothing to disagree about. Keyboards given their own kb_layout hold a different list and are left alone, since an index into this list would not mean the same layout to them. The evdev KEY bitmap would separate these cleanly - the real keyboard emits 167 keys, the pseudo-devices at most 19 - but hyprctl devices reports no capability information, so the switch is taken out from behind the name filter rather than the filter being lengthened. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Ryan Hughes
|
e78d89ee2a |
Merge pull request #9618 from acrogenesis/security/plugin-auth-boundary
Restrict third-party plugin access to authentication services |
||
|
Ryan HughesandGPT-5.6 Sol
|
572a34d3e3 |
Refresh cached plugin bar shell facades
Co-Authored-By: GPT-5.6 Sol <noreply@openai.com> |
||
|
Ryan HughesandGPT-5.6-Sol
|
3292c19fef |
Preserve built-in clone integrations
Co-Authored-By: GPT-5.6-Sol <noreply@openai.com> |
||
|
|
41b6cc6965 |
Add native video wallpaper support (#6792)
* Add native video wallpaper support * Pause video wallpapers while a fullscreen app is focused * Sample one frame when a video background sets the bar text colour A video wallpaper made the transparent bar's colour sampling decode the entire file. ImageMagick's video delegate runs ffmpeg with no frame limit, so a twenty-second 1080p background took 11.3s of CPU where one frame takes 0.14s, and it did that on every theme change. The result was unusable anyway: a multi-frame input emits one value per frame, which the single-value match then rejected, so transparent bars silently fell back to the plain text colour on every video wallpaper. Selecting frame zero fixes the cost and the colour together, and fixes animated GIFs, which had the same bug. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Load wallpaper video lazily, and without an audio output Three costs the still-image path should never have paid. BackgroundMedia imported QtMultimedia at file scope and was instantiated on every output, so the module and its audio dependency closure mapped into every shell process whether or not a video was ever shown — measured at +2.72 MiB RSS. Moving the element into its own file behind a Loader that takes a URL defers the whole import: an inactive loader maps none of it, an active one maps all 25 libraries. An inline Component cannot defer that, because the type has to resolve when the file compiles. Qt's Video convenience type always builds an AudioOutput, and `muted` only aliases that sink's volume, so every monitor decoded an audio stream it would never play and opened an audio client for it. A bare MediaPlayer with no audio output spawns no QFFmpeg::AudioR, QAudioContext or PWDevMon thread, and plays files with no audio track just the same. The shared image also turned mipmapping on, which the desktop background never had. A full mip chain is about a third more texture memory — 10.6 MiB extra at 4K, per output — for a wallpaper drawn at its own size. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Stop wallpaper playback while the session is locked or screensaved Playback stopped only for a focused fullscreen window. Locking the session did not stop it, and the lock screen starts a player of its own, so an N-monitor desktop reached 2N decode pipelines the moment it locked — and stayed there, because a display blanked for idle stops being presented but does not stop Qt's FFmpeg engine, which drives its own clock. A laptop locked with the lid shut decoded video until the battery ran out. The lock and idle services already know both states, so the background service takes the shell reference the loader offers it and reads them. Looking a service up by id needs the registry to be reactive, or a background that loads before the lock service would bind to null and stay there. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Fan out video thumbnails narrower than single-threaded image jobs The generator fans out one job per core, which was bounded because VIPS_CONCURRENCY=1 made each of them single-threaded. ffmpegthumbnailer leaves FFmpeg's automatic decoder threading on, so a folder of uncached videos put a codec thread pool on every core at once. Queueing video work separately keeps the still-image path at full width and gives the video path a quarter of it. * Recognize a named video file as a theme preview The backgrounds fallback beside it already picks videos, so a theme shipping preview.mp4 was the one case that still went unseen. * Document video backgrounds in the manual The manual described backgrounds as images only. Worth saying plainly that a video wallpaper costs far more power than a still one and that each monitor decodes its own copy, since neither is visible from the picker. * Stop the lock screen's own playback once the displays go dark Pausing the desktop wallpaper on lock only moved the cost. The lock screen builds a player per monitor of its own, so locking an N-monitor session went from N decoders to N rather than to none — and the lock service blanks the displays five seconds later without touching them, which is where a lock spends nearly all of its time. A laptop locked and shut still decoded video into a dark panel. The service already owns both transitions, so it records whether the displays are dark and the lock view stops playback while they are. The manual said playback stops while the screen is locked, which was the same overstatement; it now says once a locked screen has gone dark. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Keep videos out of the lazy thumbnail path A lazy row stands in with the media file itself until its thumbnail exists, and the picker draws that with an Image — which shows a picture and shows nothing for a video, with no reload once the real thumbnail lands. So the first open after discovering an uncached video showed a blank tile. The same branch also spawns one generator per file immediately, before either queue is reached, and the theme switcher always asks for lazy thumbnails. That put the narrower video fan out on the one path that never used it: forty uncached previews meant forty ffmpegthumbnailer processes. Sending videos to the queue instead fixes the blank tile and puts them back under the cap. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Rebuild the theme preview cache after teaching it about video Preview discovery changed what it recognizes, but its cache keys on theme directory mtimes alone. A theme that already shipped a video preview would keep whatever the old rules cached until something happened to touch the directory. Bumping the version rebuilds it once. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Drop an activeAudioTrack setting that never took effect Qt's FFmpeg backend ignores setActiveTrack while no source is open, and the literal binding is not reapplied once the media loads and the tracks become known, so the line did nothing. What actually keeps the audio decoder and its client from ever being built is the absent audio output, which a file carrying an audio track confirms on its own: no QFFmpeg::AudioR, QAudioContext or PWDevMon thread appears without it. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Give up the blank state when a display comes back The lock screen stops its wallpaper while the displays are dark, but it was tracking the blanking it asked for rather than the panels themselves. Opening a docked lid turns the internal panel back on without going through runWake, and so does a resume, which left a visible lock wallpaper frozen on one frame until the next keypress. A frozen wallpaper someone is looking at is worse than the decoding it saves, so a screen change gives the state up. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Time bound the video thumbnail generator Routing videos through the queue means they are generated before the picker opens rather than behind it, which turned an unreadable or stalled file into a picker that never opens. ffmpegthumbnailer had no bound of its own and the drain waits for every job. A generator that gives up is already handled: the run reports failure, the partial file is removed, and the row drops out of the list. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Pause only the output a fullscreen window covers The fullscreen test was global, so a game on one monitor stopped the wallpaper on every other one — including the ones still in plain view. That is the failure the lock work was careful to avoid, and it made the manual's claim that playback stops when nothing can see it untrue for the commonest multi-monitor case. A lock or a screensaver does cover every output, so those stay a single decision; fullscreen is now matched against the focused monitor, the way the bar already routes by output. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Kill a video thumbnail generator that ignores the timeout Plain timeout sends TERM and then waits for a process that may never take it, which leaves the bound it was added for unenforced on exactly the stuck files it was meant to catch. Co-Authored-By: Codex XHigh <noreply@anthropic.com> * Pause video wallpapers in battery power-saver * Fix paused video wallpaper source priming * Skip snapshots for video background transitions (cherry picked from commit 6f759538bfa76c2da03634e98ebfc2ebf63ec68e) * Generate thumbnails for direct-scan videos (cherry picked from commit 10fcca018a865dca311fb6863e8c8b0057291223) * Remember a video the thumbnail converter rejected A permanently unreadable video cost ten seconds of generator time on every picker open before its row dropped, because nothing recorded the failure. Both the menu image generator and the direct picker scan now leave a marker beside the missing thumbnail, keyed like the thumbnail on the file's size and mtime, so a repaired file starts clean. A timeout is left to retry, as it may only have been a busy machine. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Follow the panels' real DPMS state under a locked video wallpaper The lock screen stopped video playback when it asked for the displays to blank, and resumed on input, but never checked what the panels did. A blank that failed left a lit panel on one frozen frame, and a resume that turned the same outputs back on played nothing until the next keypress. Quickshell exposes no DPMS signal, so while a video is the locked wallpaper the lock polls hyprctl and decides per surface from the answer. A wake or blank request drops the last answer so its optimistic state applies until the next poll confirms it. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Pause a video wallpaper for the fullscreen window that covers it The fullscreen check read the globally active window and the focused monitor, so it only knew about the window that had focus. A fullscreen window left on one monitor while focus moved to another resumed the wallpaper decoding behind it, and with fullscreen windows on two outputs only the focused one paused. Each output's visible workspace reports whether a fullscreen window covers it, and Quickshell flips that on the compositor's fullscreen event, so each panel now decides from its own monitor's active workspace instead. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Reopen a video wallpaper a theme switch replaced behind its path Two themes that both ship backgrounds/wallpaper.mp4 leave the current background at the same path after a switch, so the displayed path never changed and the running player kept decoding the old file from its open descriptor. Stills go through the snapshot transition and survive this; a video switch is instant and did not. A forced switch onto the path already on show now bumps a reload counter, and BackgroundMedia rebuilds the video player for it. A cache-busting query is not an option there, since FFmpeg reads it as part of the filename. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Keep picker rows uncached while a rejected video is left out Skipping a video with a failure marker let the picker cache its rows without it, and cached rows are trusted on the directory's mtime alone. A file repaired in place never touches that, so the marker's fresh key was never consulted and the video stayed missing. The generator now hands the marker back to the row loop, which drops the row and leaves the rows uncached, so each open re-stats the file and a repaired one is converted again. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Hand each background loader only its own kind of file BackgroundMedia fed one URL to both the still loader and the video player. On a switch from image to video the Image was handed the video's URL in the moment before its loader unloaded, so Qt tried to decode the mp4 as a picture and logged an unsupported format on every such switch; the reverse handed the player a still to demux. The still URL is now empty whenever the path is a video and the video URL empty whenever it is a still, so a switch changes only the loader that stays. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Stop a video wallpaper before tearing its player down Switching from a video to a still destroys the BackgroundVideo item while its player is mid-read, which FFmpeg reports as a failed open in the shell journal on every such switch. Stopping the player on destruction lets the demuxer wind down first, and the switch is quiet. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Play a video wallpaper's sound track from the first monitor Video wallpapers were always silent: the player was built without an audio output, since a muted output still decodes the track and opens an audio client on every monitor. A video with music should be able to play it. The player now builds its AudioOutput only once the media reports a sound track, so a silent file still opens no audio client, and only the first screen's panel opts in, so a multi-monitor desktop does not layer copies of the track. The output is muted while a paused player primes its first frame, and the lock screen stays silent. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Keep a departing video player off the still's file The switch away from a video still logged a cancelled open, and stopping the player on destruction only hid it: stopping reports the media as loaded, which the loaded handler answered by playing again. The real cause was one evaluation pass. Both URLs derived from the `video` flag, which is itself bound to the path, and QML updates the two in no fixed order, so the video URL could evaluate against the stale flag and hand the player the still for a moment. Its destructor then cancelled that open. Each URL now tests the path directly, the source binding only applies while the path is a video and restores nothing when it stops, and the destruction stop goes away with the hazard it introduced. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> * Pin the audio wiring in the test and name the output in the manual The audio assertion passed with the BackgroundMedia forwarding binding removed, which would have left every wallpaper silent, and did not pin the silent default or the first-screen selection. It covers all three now. The manual said the sound track plays "from your first monitor", which reads as routing to that monitor's audio device. It is the first monitor's wallpaper that plays, through the default output. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> --------- Co-authored-by: Omabot <omabot@omarchy.org> Co-authored-by: Codex XHigh <noreply@anthropic.com> Co-authored-by: z8 <yam@kernelius.com> Co-authored-by: David Heinemeier Hansson <david@hey.com> |
||
|
acrogenesis
|
094c913065 |
Tighten replacement bar plugin boundaries
Reported-by: Roger Piñol <rogerpicar@gmail.com> |
||
|
acrogenesis
|
19985314c2 | Merge quattro into plugin auth boundary | ||
|
|
d3d23fddde |
Honor keepLoaded for services during plugin hot-reload (#9485)
* Honor keepLoaded for services during plugin hot-reload Plugin reload destroyed every service, including omarchy.lock, which drops the ext-session-lock client while Hyprland still holds the lock and surfaces the crashed-lockscreen fallback. * Prove keepLoaded service survival with a fixture service A fresh lock service also reports an empty lastEventAt, so comparing it across the rescan passed whether or not the instance survived. A fixture keepLoaded service whose in-memory marker is set before the rescan and read back after can only pass when the same instance is still mounted. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Drop kept services whose plugin no longer declares a service The _syncServices cleanup only asked whether the plugin was still installed and enabled, so a kept service whose plugin dropped its service kind or entry point kept running as a zombie until shell restart. Apply the same eligibility checks used at creation, and hand kept instances the refreshed manifest after a rescan. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Cover omarchy.media in keepLoaded expectations; note kept services reload on restart Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: David Heinemeier Hansson <david@hey.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
Ryan Hughes
|
7eca64e268 |
Merge pull request #8859 from tobi/feat/network-captive-portal
Show captive portal status and sign-in action in network panel |
||
|
acrogenesis
|
1702cf0bee |
Restrict third-party shell plugin capabilities
Reported-by: Roger Piñol <rogerpicar@gmail.com> |
||
|
Ryan Hughes
|
e1fc502286 |
Nudge the bar over IPC when toggling visibility
The shell notices the bar-off flag through a FileView watch on the toggles directory, and that watch can permanently stop delivering events after flag changes land in quick succession — the bar then stays parked off screen until the shell restarts. Have omarchy-toggle-bar nudge the bar's probe over IPC after flipping the flag, so the toggle no longer depends on the watch staying alive. The watch remains for other writers of the flag. |
||
|
Tobi Lutke
|
41a40ccc78 | Show captive portal status and sign-in action in network panel | ||
|
David Heinemeier Hansson
|
7026ede90b |
Strip image tags after the newline rewrite, not before it
The card binds the body Text to styledBody, which rewrites newlines to <br/> *after* sanitizeBody has run. That rewrite inserts tag syntax into text the stripper deliberately kept: a kept tag may hold a `<` of its own, and `<x`, newline, `<img src="http://host/x.png">` is one tag named `x` to both the stripper and Qt, so it survives whole — until the rewrite splits it into `<x<br/>` and a live image tag the input never contained. Measured against Qt 6.11.2 with an offscreen StyledText and a local HTTP server: that body issues the GET after this branch's sanitizer and issues nothing before it, because the one-pass /<img[^>]*>/gi it replaces deleted the inner substring outright. The whole-tag bound is still the right trade — it is what stops the stripper manufacturing tags — but it only holds if nothing edits the string afterwards. So move the rewrite into NotificationLogic, next to the reasoning it depends on, and strip again after it. What Qt parses is then what was checked last. The tests assert on styledBody for the same reason, since sanitizeBody's output is no longer the string that reaches the renderer, and a regex assertion pins the card's binding because no JavaScript assertion can see a QML property. |
||
|
|
0260d2accb |
Stop the textFormat test from passing when it has not checked
The root rule matched only a file-level root Text, of which this tree has
exactly one. QML inline components are roots for the same reason — the
`text` of `component InfoValue: Text {` comes from every caller, so the
file it lives in never binds it — but they sit inside another element, so
the depth-1 test never saw them. Six went uncovered while the test
reported green, among them the network panel's InfoValue, which callers
bind to the IP address and gateway.
Six more ways to write a Text were read as clean rather than as unreadable:
an opening brace that is not last on its line, a brace on the line after
`Text`, a one-line block containing nested braces, a wrapped binding split
by a comment or a blank line before its `+` (which exempted a dynamic
binding as a literal), and a root Text indented from column zero. Require
the forms a line scanner can read instead of parsing QML; the tree already
writes every Text that way.
Last, a run that read no files reported success. A checkout with no shell/
QML now fails instead, since an all-clear from a scan that opened nothing
is the one answer this test must never give.
Each case is covered by a fixture that fails without its fix.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-Authored-By: OpenAI Codex (gpt-5, xhigh) <noreply@openai.com>
|
