a98e55eb913fa755f4e9978504572640bbb209f5
61
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
+12
|
e1b0e5e9bb |
Converge omarchy-mac and omarchy-mx-mac into upstream Omarchy (#14431)
* Add omarchy-hw-platform to tell Apple Silicon and Qualcomm machines apart
aarch64 covers Apple Silicon Macs, Snapdragon laptops, Raspberry Pis and
VMs, so the CPU architecture can't pick platform setup. omarchy-hw-platform
prints apple-silicon, qualcomm, generic-aarch64 or generic from the vendor
prefixes in the device tree's root compatible (/proc/device-tree, then
/sys/firmware/devicetree/base) and the CPU, and fails when they contradict
each other. Its qualcomm answer uses the same evidence as the dragon
branch's omarchy-hw-qualcomm-soc, and the fixtures check the two agree.
omarchy-hw-apple-silicon is the Apple predicate on top of it.
An image built away from its hardware names its target in a root-owned
manifest, /var/lib/omarchy/image/target (format=1, platform=). While the
root is being built rather than booted, the detector answers from it and
never reads the build host's device tree; a booted system always answers
from its hardware. As root it restarts in an empty environment, so no
variable picks the platform for privileged setup.
Co-authored-by: Birk Skyum <74932975+birkskyum@users.noreply.github.com>
Co-authored-by: Jimmy Van Veen <8206925+JimmayVV@users.noreply.github.com>
* Reject platform gates keyed only on the CPU architecture
An architecture check is right for an ABI, a binary or a repository's
$arch, not for picking a platform. The lint lists each shipped check after
review and fails on a new one, so platform setup goes through
omarchy-hw-platform.
* Compose default packages from base, architecture and platform lists
omarchy-reinstall-pkgs installed the base list on every machine. A
platform's default set is now the base list, then install/omarchy-aarch64.packages
on aarch64, then the platform's own list when it has one
(install/omarchy-qualcomm.packages adds linux-firmware-qcom).
omarchy-pkg-defaults prints the set for the detected platform, or for the
one named, and reinstall installs it. x86_64 still gets exactly the base
list, and an image build gets its target's set.
* Early-load thunderbolt only where the kernel builds the module
linux-aarch64 has no thunderbolt module, and mkinitcpio fails the whole
image over a MODULES entry it cannot find. The optional form, thunderbolt?,
is not enough: a systemd initramfs copies MODULES as written into
modules-load.d, where "thunderbolt?" names no module, and a kernel without
the module would still list it there. thunderbolt_module.conf now adds plain
thunderbolt only when modinfo finds it as a module for the kernel being
built.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Compose mkinitcpio HOOKS from an early baseline drop-in
omarchy_hooks.conf assigned HOOKS outright, and mkinitcpio sources drop-ins in
name order, so it ran after any numbered drop-in (90-*.conf) and threw its
hooks away. HOOKS now comes from 00-omarchy-hooks.conf, which sorts first, and
later drop-ins add to it. The NVIDIA kms filter and the vconsole handling stay
in omarchy_hooks.conf. With the drop-ins Omarchy writes, machines keep the
same HOOKS, MODULES and FILES; a user drop-in that sets HOOKS and sorts before
omarchy_hooks.conf now takes effect instead of being overwritten.
Migration 1786605598 now sources the baseline first, since without it the
migration would read empty HOOKS and also rebuild hybrid systems. It skips a
machine that lacks the baseline.
* Resolve the LUKS parent from raw lsblk output
lsblk -s prints the ancestor tree with box-drawing prefixes ("└─/dev/nvme0n1p6"), so the crypto_LUKS parent came back as a path that does not exist and first-boot setup stopped with "Could not locate the LUKS device to re-key". -r prints raw names. Factory reset uses the same lookup.
* Check the factory-reset passphrase against keyslots only
cryptsetup open tries enrolled tokens before the key file, so a TPM2 or
FIDO2 token could authorize the re-key with a wrong passphrase.
* Test LUKS parent lookup during owner setup and factory reset
Exercise raw ancestry output without invoking provisioning or reset. Cover btrfs subvolume roots, absent encryption, failed probes, and explicit cryptdevice specifications.
* Cover LUKS parent lookup through an LVM volume group
* Journal the first-boot LUKS re-key so an interrupted attempt resumes
A first boot killed after the staged install key's slot was retired left the
key file behind, and every retry then stopped at "the staged LUKS key no
longer unlocks". A lost key file with the boot-time auto-unlock still
configured let setup finish with the disk unlocking unattended.
The re-key now runs from install/provisioning/luks-rekey.sh and records its
phase and slot numbers (never key material) in
/var/lib/omarchy/provisioning/luks-rekey.state. It reuses the owner's slot
instead of adding a duplicate, retires LUKS1 slots too, and destroys the
staged key only after the volume proves it opens nothing. Setup refuses to
finish while any part of the provisioning unlock remains. The journal ends at
phase=done and leaves together with pending, so a retry after the staged key
is retired must use the password the disk already holds.
Key checks exclude LUKS2 tokens: cryptsetup open tries an enrolled token
(say a TPM2 slot a previous owner left behind) before the key and reports its
slot whatever key it was given. Slot listings read only the keyslot section,
since a luks2-keyring token looks like a keyslot in luksDump.
* Change the root volume's LUKS key before the login and root passwords
Installation gives the login user, root and the disk holding / one password,
but omarchy-drive-password changed only the LUKS key, so the three drifted
apart. For the disk holding / it now checks the current password opens the
disk, changes the LUKS key, confirms the new key opens the disk and the old
one no longer does, and only then sets the login and root passwords. Any other
encrypted drive changes its LUKS key alone. Every drive now asks for the
current password with gum instead of cryptsetup's prompt.
A journal in ~/.local/state/omarchy/drive-password.state (disk UUID, key slots
and phase, never a password, written with the re-key journal helpers) lets the
next run finish an interrupted change. The rerun accepts only the old key
(removing the slot the interrupted change added) or the new one (retiring the
old slot), so another key such as a recovery passphrase never becomes the login
password. luksChangeKey is judged by whether the new key opens the disk, not
by its exit status, and key checks exclude LUKS2 tokens, which cryptsetup
open would otherwise accept in place of any password.
Runs are serialised, cryptsetup calls hold a disk lock, a / whose LUKS
partition cannot be resolved fails closed, and passwords are never traced. A
new password equal to the current one is refused, and --pbkdf argon2id is
passed only to LUKS2, so LUKS1 drives can change their password again.
* Add omarchy-lifecycle-dispatch for platform boot operations
Provisioning, factory reset and update call a fixed set of operations
through it. A platform whose boot chain the generic Limine path can't drive
registers a directory of root-owned entrypoints in the dispatcher; every
other platform gets a no-op and keeps its generic path. Apple Silicon is
registered to omarchy-mac-boot's /usr/lib/omarchy/mac-boot, with its
required operations failing clearly when the package or an entrypoint is
missing. docs/lifecycle-dispatch.md is the contract, including how a
Qualcomm boot package would plug in.
* Let the platform's boot package own first-boot setup's boot chain and key slots
Owner provisioning asks provision-prepare before the owner form, hands the
staged unlock to provision-commit and provision-verify where the platform
implements both, and records the kept LUKS slot through luks-slots before
the staged key is destroyed; the disk password change records the owner's
new slot the same way. On x86, Snapdragon and generic aarch64 every call is
a no-op and first boot is unchanged.
* Reset through the platform's boot package where it owns the boot chain
Where a platform implements the reset operations, reset-prepare and
reset-verify stage and prove the factory root's boot files, the throwaway
slot is added only after that, and reset-commit gets the key on standard
input once the factory root is active. A failure before the switch rolls the
boot state back and revokes the slot. Elsewhere the Limine UKI path is
unchanged.
* Check the platform's boot chain after an update
omarchy-update-boot runs update-verify after AUR packages, the last
sudo-capable step, so it also covers the initramfs rebuilds they trigger.
It follows third-party build code, so like AUR it authenticates through the
no-update wrapper. A failed verification finishes the update's remaining
steps, then exits non-zero without offering the reboot. Where the platform
does not implement it nothing runs and nothing asks for root.
* Hand a machine to its platform's migration through lifecycle dispatch
migrations/1790347292.sh resolves the new optional migrate operation and,
where the platform's boot package implements it, runs it as root. The
entrypoint moves the machine onto the platform's official package set,
idempotently and resumably; its failure leaves the migration pending. Once
it succeeds, a root-owned marker spares other accounts the migration and its
root prompt. Everywhere else, Macs without the boot package included, the
migration is a no-op, and an undetermined platform keeps it pending.
* Refuse packages tagged for another platform in a pacman hook
A platform package names its platform with groups=('omarchy-platform-<name>'),
<name> being what omarchy-hw-platform prints. omarchy-settings ships a
pre-transaction hook, the guard it runs and a copy of the detector, so the
guard is resident before the runtime and any platform package. The guard
reads tags from the synced databases and refuses a transaction that installs
a package tagged for another platform; a transaction without a tagged
package passes without asking which machine this is. Image builds answer
from the image's root-owned target manifest, as the detector does.
The guard ships on aarch64 only: no platform package is built for x86_64,
so x86 transactions run no hook. Hardware setup starts by proving the guard
is resident and checking the packages an installer placed without it. On
generic aarch64, where no platform packages exist, a missing guard is
logged, not fatal, and on x86 it is expected.
docs/platform-guard.md is the contract.
Co-authored-by: Birk Skyum <74932975+birkskyum@users.noreply.github.com>
Co-authored-by: Jimmy Van Veen <8206925+JimmayVV@users.noreply.github.com>
* Enable Voxtype's Vulkan backend only when it is installed
omarchy-hw-vulkan reports a Vulkan runtime, not whether this voxtype build
has a Vulkan backend. The aarch64 voxtype-bin package ships only the CPU and
ONNX binaries, so on any aarch64 machine with a Vulkan driver setup ran
`voxtype setup gpu --enable` and printed "Vulkan backend not installed" in
the middle of an otherwise working install. Require the backend binary too.
x86_64 voxtype-bin always ships /usr/lib/voxtype/voxtype-vulkan, so x86
installs still switch to the GPU backend as before.
Ported from omacom/omarchy-mac#483.
Co-authored-by: Oliver Lukschander <33756270+oliverlukschander@users.noreply.github.com>
* Link the system Widevine CDM into Brave
The widevine package registers its CDM for Chromium and Firefox only.
Brave looks for the CDM in its own install directory, finds nothing, and
DRM sites (Netflix, Apple TV+, Spotify) fail with a blank player and no
useful error. This hits machines where Widevine comes from that package,
such as aarch64 ones, since no Widevine component is published for them.
Link /opt/WidevineCdm/chromium into /opt/brave-bin and /opt/brave-origin-bin
through as_root when Brave or Brave Origin is installed, and add a migration
that repairs existing installs. Both do nothing when the widevine package is
absent or the browser already has a CDM. A standard x86 install has no
widevine package, so nothing changes there.
Ported from omacom/omarchy-mac#474, extended to Brave Origin.
Co-authored-by: Caleb Marshall <68087341+cajomar@users.noreply.github.com>
* Report failed setup steps on the console
With file logging, run_logged sends a failing leaf's output and its
"Failed:" marker to the install log only, so the caller sees setup stop
with an exit status and nothing else. A missing command (exit 127) was the
case that made this hard to diagnose.
Print the failed script, its exit status and the log path on stderr. Stdout
logging mode already shows the failure marker and is unchanged, and
successful steps stay quiet.
Ported from omacom/omarchy-mac#389 (the logging part).
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Let a migration defer itself without stopping the update
A migration that exits 75 changed nothing and cannot finish yet: omarchy-migrate
leaves it pending with its login notification, runs the migrations after it and
exits 0, so omarchy update carries on. Any other failure still stops the queue.
The platform migration passes a deferred refusal of its entrypoint through, and
defers itself where the dispatcher can't resolve its entrypoint (the platform
can't be told, or the entrypoint isn't trusted): nothing has run then, so the
update goes on to its boot verification, which fails there, as documented.
* Keep Apple Silicon's systemd initramfs on the HOOKS baseline
00-omarchy-hooks.conf set the busybox line on every machine. On a Mac,
omarchy-mac-boot's drop-ins then add the Asahi firmware hooks, but its
encryption drop-in reads busybox encrypt as a Mac unlocked through
cryptdevice= and leaves the line alone. The image came out as
"... block encrypt asahi omarchy-vendorfw filesystems ...", with no
systemd, sd-encrypt or omarchy-mac-encrypt, so an encrypted Mac could not
unlock its disk. Reproduced against an M1 Pro's installed drop-ins.
The baseline now asks omarchy-hw-platform. Apple Silicon starts from the
systemd line its boot package builds on. A Mac whose own mkinitcpio.conf
carries the asahi hook, or busybox encrypt, keeps that line, as a legacy
install needs. x86, Snapdragon and generic aarch64 keep today's busybox
line, as does a machine with no detector. The detector is the runtime's,
or else the copy omarchy-settings ships for its platform guard, so a
settings package newer than the runtime still places a Mac. A detector
that cannot place the machine stops the build.
The HOOKS test now composes the baseline on each platform and on legacy
Mac lines. A new test composes it with omarchy-mac-boot 20260926-1.45's
drop-ins, kept as fixtures, and checks the exact HOOKS the M1 Pro builds.
The NVIDIA test pins its platform.
* Hide optional installs that have no package on this machine
Not every optional install exists on every architecture: some vendors ship no
aarch64 build, and some repositories don't carry a package at all. Each
Install row now carries a `when:` guard naming every package its install
command adds, checked with omarchy-pkg-available, so a row with nothing to
install disappears instead of failing halfway through a pacman transaction.
The rows that build from the AUR (Chrome, Edge, Brave, Brave Origin, Zen,
NordVPN) are guarded on the CPU architectures their vendors publish for.
omarchy-pkg-available asks the sync databases: one `pacman -Slq` per batch,
and `pacman -Sp` for a name that list doesn't hold, so a provided name
(libappindicator-gtk3) and a version constraint resolve the way `pacman -S`
will. The menu's guard prelude sources the same function, so the whole batch
still costs one fork. omarchy-reinstall-pkgs reports and skips a default
that no configured repository offers instead of failing the transaction.
On x86_64 every guarded row resolves against the stable and edge
repositories, so the menu is unchanged there.
Tests derive each row's packages from its install command on x86_64 and
aarch64 and fail when the guard names different ones.
Co-authored-by: Ryan Hughes <1630358+ryanrhughes@users.noreply.github.com>
* Run 1Password with software GL where there is no render GPU
Electron draws a blank window when the machine has no DRM render node: a VM,
a headless or passthrough GPU, or a GPU whose driver isn't up yet (Apple M3
and later on Linux today). omarchy-hw-render-gpu tells whether a renderD node
exists, and omarchy-cmd-electron-gl-args prints --ozone-platform=wayland
--disable-gpu only when it doesn't.
omarchy-cmd-electron-gl-wrap installs a marked PATH wrapper in /usr/local/bin
that execs the real binary with those flags, so it follows the machine rather
than the moment it was installed. It refuses to replace a launcher it didn't
write, or to wrap a binary over itself, and stages the write so a failure
leaves the old launcher in place. omarchy-cmd-desktop-exec-repair points the
user's desktop entry at the wrapper by replacing only the executable token,
keeping arguments, other actions and customizations, with a backup.
The 1Password installer uses them when the machine has no render node. With
one, which is every x86 machine with a working GPU, nothing changes.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Record with wf-recorder when gpu-screen-recorder can't start
gpu-screen-recorder knows NVIDIA, AMD, Intel and Broadcom GPUs and aborts
during GL init on anything else, such as Apple Silicon's, before a recording
starts. Screen recording now falls back to wf-recorder, when it is installed,
if gpu-screen-recorder is missing or exits before the file appears. The
picker, file naming, notifications and post-processing are shared. wf-recorder
records one audio device, so desktop plus microphone go through a temporary
null sink that stop unloads, and its track is pinned to 48 kHz. Portal
capture and --resolution stay gpu-screen-recorder only.
The finalize pass keeps 48 kHz too: loudnorm declares 192 kHz output, so
without -ar the AAC encoder wrote 96 kHz from a 48 kHz recording, which many
editors decode as silence, and which on Apple Silicon makes the speaker
safety daemon lock the amps. #11092 makes the same one-line change; whichever
lands second drops it.
Stop and status matched `pgrep -f ^gpu-screen-recorder`, which misses
wf-recorder and matches any command line that starts with that path. The
script now records the recorder's pid, and the new
omarchy-capture-screenrecording-process checks or signals it by its
executable, through a pidfd opened before the check so a reused pid can't be
signalled. When that pid is no longer a recorder (a recording started before
this change, or one that died), every recorder the user runs counts, as it
does for the bar indicator and the Stop row, which use the same helper.
Where gpu-screen-recorder works, which is every x86 GPU it supports today, it
records as before.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
Co-authored-by: Issac Trotts <15530+ijt@users.noreply.github.com>
* Hold logind's lid switch while a display it doesn't count is in use
systemd-logind treats a closed lid as docked only when an external display
is on a connector type it lists (HDMI, DisplayPort, DVI, VGA...). Displays on
"USB" connectors, which Apple Silicon uses for USB-C displays, aren't on that
list, and a missing comma fuses DVI-A and Composite into one entry. With such
a display in use, closing the lid suspended a laptop that was still being
used on it.
omarchy-system-lid-inhibit holds a handle-lid-switch inhibitor while one of
those connectors is connected and enabled in Hyprland, on a laptop where
HandleLidSwitchDocked is ignore, which is exactly the case logind would have
ignored had it counted the display. It releases the inhibitor when the display
goes. A compositor or logind that doesn't answer changes nothing, since
releasing then would suspend a closed lid. The inhibitor runs as a transient
user unit bound to the monitor watcher's unit, so a watcher that dies can't
leave the lid inhibited until logout.
The monitor watcher runs it alongside the clamshell sync. On a machine whose
external displays are all on connectors logind counts, it does nothing.
* Keep the focused workspace in front when a monitor goes away
When a monitor is unplugged, or the lid turns off the laptop panel, Hyprland
first warps focus to whichever monitor it lists first and only then moves the
removed monitor's workspaces over. The workspace you were on lands hidden
behind that monitor's own (Hyprland 0.56.2, CMonitor::onDisconnect).
monitor.focused fires before Hyprland records the new focus, so the monitor
still reported as active is the one being left: its workspace is remembered
until the event loop next turns, and a monitor.removed in that window focuses
it again once the removal has finished. An open special workspace already
comes along, and any focus or workspace change made before the restore runs
wins.
* Drive the keyboard backlight from the ambient light sensor
Laptops with an ambient light sensor and a keyboard backlight LED now light
the keys in the dark and dim them as the room brightens, inverse to display
auto-brightness. omarchy-brightness-keyboard-auto polls the sensor every five
seconds (preferring an IIO device that names itself ALS, and converting a raw
channel with its offset and scale) and maps lux onto the LED, with a deadband
so it doesn't chase noise. It pauses while the screen is locked or the lid is
closed.
A level set with the keyboard-brightness keys wins until the light changes
enough that it no longer fits. omarchy-brightness-keyboard records each level
it sets in the session's runtime directory (a private state directory without
one), so the loop can tell keys turned off on purpose from keys left off by
the lock screen or a restored zero, which it lights again.
The user unit runs it in the graphical session. Its ExecCondition asks
--available, so it is a no-op on machines without both a sensor and a
keyboard LED. First run enables it, and a migration enables it for existing
installs, writing the enable symlink itself when there is no live user
manager.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
Co-authored-by: Gabe Ohlson <3355909+6abe@users.noreply.github.com>
* Defer an image build's hardware setup to the machine's first boot
An image is built away from the machine it will run on, so its hardware
leaves would probe the builder. While the image manifest the detector
already reads (/var/lib/omarchy/image/target) exists, omarchy-apply-hardware
queues every leaf of install/hardware/all.sh instead of running it and arms
omarchy-provision-hardware.service. On the first boot, before owner setup
and the login screen, omarchy-provision-hardware retires the manifest and
runs the queue on the real hardware: a failed step stays queued for the
next boot (exit 75), and the initramfs is rebuilt once after the last step
when a step changed its inputs or asked for it. Bluetooth starts its
service on that boot, whose target is already up. Root ignores any
environment override of these paths. Without a manifest, as on every
ISO install, hardware setup runs exactly as before. Nothing here fetches
package databases: an image carries its sync databases and every package
its steps install.
* Give an image-built root a UTF-8 locale when LANG is still C
A root built from a distribution tarball instead of the ISO (Arch Linux
ARM's ships LANG=C) never went through the ISO's locale step, so it ran
non-UTF-8. The config phase now selects en_US.UTF-8, generating it if
needed, but only when LANG is unset, C or POSIX: any named locale is
somebody's choice and stays. The ISO writes the locale before this runs,
so an ISO install is unchanged.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Let a platform's packages run their own boot, system and user setup
Three dispatch operations give a platform one place for the setup it
needs beyond Omarchy's, instead of inline platform branches in the setup
leaves. The last hardware leaf runs setup-boot, then setup-system, as
root, so an image build queues them with the others and its first boot
runs them, with image-first-boot (offline-safe, asking for the one boot
rebuild instead of building). setup-boot belongs to the boot package and
is required on Apple Silicon, where hardware setup has no other way to
run the Mac's boot setup; a failed setup-boot stops the leaf before
setup-system. setup-user runs as the user being set up, refuses root,
and gets only the user's home and session variables: from the last user
leaf at finalization (skipped inside an image build, where the detector
would read the build host) and again from first run once the session is
up. On Apple Silicon setup-boot resolves in omarchy-mac-boot's directory
and the other two, both optional, in omarchy-mac's, /usr/lib/omarchy/mac;
x86, generic aarch64 and Qualcomm register none, so all three are no-ops
there.
A failed finalization now keeps first run pending, like any failed
first-run step, instead of letting the other steps mark it complete.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Find batteries, lids and panels that aren't named like a PC's
Laptop detection assumed PC names: a battery called BAT*, a lid in /proc/acpi, a
touchpad or trackpad in the device name, a GPU backlight. Apple Silicon has
none of them (macsmc-battery, the SMC lid switch, apple-mtp-multi-touch,
apple-panel-bl), and some Framework and Chromebook firmware calls its battery
CMB0, so those machines lost the battery panel, laptop-only services, lid
handling, the touchpad toggle and display brightness.
- Battery presence goes by type instead of name, and skips a battery scoped
Device (a wireless mouse or keyboard), so a desktop with one isn't a laptop.
- Battery status takes the first UPower battery that powers the machine, reads
thresholds and cycles from it (BAT* stays the fallback), shows the magnitude
of a signed power_now, and rounds the percentage half-up for display like the
bar, while the charge-hold check keeps the unrounded value.
- A laptop is also one with any input device that reports a lid switch
(SW_LID), whatever its name: Apple's SMC input device has the same name on a
Mac mini, where it reports none. Whether the lid is closed comes from ACPI
where there is an ACPI lid, as before; otherwise logind is asked, with a
short timeout, only when a device reports a lid switch.
- A device named touchpad or trackpad still wins; only when there is none does
the touchpad match take a mouse udev marks as a touchpad (Apple's
multi-touch trackpad), never a touchscreen.
- The platform package can describe its displays in
/usr/share/omarchy-platform/displays.conf: backlights that never drive the
panel (a Touch Bar's), the panel's own where there is no GPU backlight, and
a display driver without DDC channels, where a probe walks unrelated I2C
buses for about 3 s: there only a connector with a ddc node is probed, and
a monitor without one reports no brightness instead of dimming the built-in
panel. Omarchy ships no such file and names no device in it; without it the
backlight choice and DDC probing are unchanged.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
Co-authored-by: Ryan Hughes <1630358+ryanrhughes@users.noreply.github.com>
Co-authored-by: Sparsh Kumar <22640187+skkumarsparsh@users.noreply.github.com>
Co-authored-by: dl-alexandre <166029845+dl-alexandre@users.noreply.github.com>
* Keep the user's XDG config and state directories in platform user setup
setup-user runs with an allowlisted environment, which dropped
XDG_CONFIG_HOME and XDG_STATE_HOME. A platform's user setup reads the user's
configuration and keeps its setup markers there, so for a user who sets
either it looked in, and wrote to, the default directories instead. Both now
pass through with the rest of the session; XDG_DATA_HOME and everything else
still don't.
* Let a platform package add Hyprland defaults of its own
A platform's runtime package may need Hyprland defaults of its own (a Mac's
capture keys and three-finger workspace swipe, say), and Omarchy's config
should carry no branch for them. Three directories under the platform root,
/usr/share/omarchy-platform, now take them. The one installed platform package
owns that root, Omarchy reads it by literal path and ships nothing there, so
without a platform package nothing changes. Each file is loaded by its path,
so it can't shadow a module, and one that fails is logged and shown as a
notification while the rest of the config loads.
- hypr/defaults/*.lua loads before Omarchy's defaults. A
chord bound there replaces Omarchy's default for it, and a decorator it adds
runs before every later bind, so it can bind what has to run first. It sees
the command a bind runs, including the command a shell shortcut such as
{ menu = "root" } stands for when it binds the shell's global shortcut.
- hypr/settings/*.lua loads after Omarchy's defaults and
before the theme, for settings that replace Omarchy's.
- hypr/gestures/*.lua loads after the user's files, only for what must
see them: the gesture registry, which now records on every platform, lets a
default gesture step aside for the user's own.
The user's files load after the first two and can unbind or rebind any of it.
* Let a platform package name keys in the keybindings menu
The keybindings menu shows a key by its keysym, which on some keyboards is not
what the key says: on a MacBook, XF86MonBrightnessUp and Down are the F2 and
F1 keys, so the menu listed rows like "SHIFT + XF86MonBrightnessUp". A
platform package can now list names for such keys in /usr/share/omarchy-
platform/key-names, one "<keysym> <name>" per line, and the menu shows those
instead. The file is part of the menu cache's key, so installing or changing
it refreshes the menu. Without it the menu is as before.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
Co-authored-by: kx0101 <90087463+kx0101@users.noreply.github.com>
* Keep the top bar out of a panel's camera cutout
A laptop panel with a camera notch at its top (Apple Silicon MacBooks, for
one) covered the middle of the top bar, and a bar shorter than the notch left
a sliver of every window beside the camera. Omarchy knows no panel's cutout
itself: the platform's own package describes them in
/usr/share/omarchy-platform/display-cutouts.json, by
connector, physical mode and the rows the cutout covers. On a described panel
a top bar is never shorter than the cutout, its center section sits beside
the right one, and hiding it parks all of it; [bar] notch-height sets that
floor by hand, on that panel only. Without a description, which is every
machine without such a package, the bar is as before.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Keep PC and Intel Mac quirks off Apple Silicon
A few hardware steps and commands written for PCs and Intel Macs do the wrong
thing on Apple Silicon:
- The Intel Mac Wi-Fi quirk turns off the Broadcom firmware supplicant for
every Mac whose DMI vendor is Apple and whose chip is on its list. Apple
Silicon reports Apple Inc. through U-Boot's DMI tables, and the M1 Pro and
Max's BCM4387 is on the list, but there the firmware supplicant is the one
that works: turning it off makes firmware commands time out and breaks
scanning. The install step and its migration now skip Apple Silicon.
- fnmode=2 for Apple-like keyboards is left to the Mac's own platform package
on Apple Silicon, where the built-in keyboard's top row depends on it.
- The SPI keyboard check reads the DMI product name without failing the
hardware pass where there is none.
- The Windows VM, an x86_64 guest under KVM, runs on x86_64 only, and direct
boot (U-Boot finds the bootloader and makes its boot entries itself)
refuses Apple Silicon; the menu hides both there. Hibernation setup skips
it; its kernel has no hibernation today, and resume there is not wired.
Everywhere else each step runs as before.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Let a platform's runtime package adjust the apps it needs to
Some apps need a platform's own touch once they are installed. On Apple
Silicon, Chromium-family browsers must decode video in software (the hardware
decoder renders green frames in them), and Steam only runs through a
FEX launcher, which then depends on Steam and must go before Steam can be
removed. Until now the Mac runtime did this with inline branches in the
installers.
Two optional dispatch operations take their place. post-install <app> runs
as the user once an installer has installed the app and finished its own
setup of it: every browser install (after its flags file, before it says the
browser is installed) and Steam's (after the package, before the 32-bit
drivers and the first launch). pre-remove <app> runs before Steam's removal
drops its packages. Where a platform registers them they refuse root (a
platform with nothing registered is a no-op, so sudo installs still work
there) and get the same home and session variables as setup-user, and a
failure fails the install or stops the removal. On Apple Silicon they
resolve in omarchy-mac's directory; every other platform registers none, so
installs and removal run as before there.
Steam's 32-bit driver step also stops failing the install on a machine with no
Intel, AMD or NVIDIA GPU (Apple Silicon, but also Snapdragon or a VM): it has
nothing to add there and now says so.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Ask the platform's boot package before an update takes over its files
When an Omarchy package's upgrade stops only on files no package owns, the
update moves them aside and retries. On a Mac some of those files belong to its
boot chain or were written by its image (initramfs and pacman configuration,
say), and moving them aside can leave it unable to boot or update. The Mac
runtime refused those paths with an inline list.
update-takeover <path>... asks the platform's boot package instead, before
anything moves: read-only, exit 0 lets the takeover go ahead, anything else
keeps every file and the update fails as it did before the retry existed. The
update resolves it as the user and runs it with sudo only where it resolves,
inside the authorization the move needs anyway. On Apple Silicon it is
required: a Mac without its boot package, or with one too old to answer, keeps
its files. Every other platform registers none, so the takeover goes ahead as
before, asking no one.
* Install the Mac's package set on Apple Silicon
omarchy-pkg-defaults already composes install/omarchy-<platform>.packages
after the base and aarch64 lists, but Apple Silicon had no list, so a Mac got
the generic aarch64 set: no omarchy-mac or omarchy-mac-boot, whose entrypoints
the dispatcher requires there.
install/omarchy-apple-silicon.packages names the Mac's runtime and boot
packages, plus the defaults an owner may remove: the startup-volume tool,
hardware video decode, Widevine, and wf-recorder, since gpu-screen-recorder
can't capture on Apple Silicon and screen recording falls back to it. What a
Mac can't work without (its speaker stack, PipeWire's PulseAudio server and
realtime scheduling, the GPU's Vulkan driver) comes as omarchy-mac's
dependencies, so a new Mac driver needs no Omarchy change. Other platforms
compose exactly what they did.
Co-authored-by: Scott Jones <444693+scottjones@users.noreply.github.com>
* Give existing aarch64 machines the zram swap Omarchy configures
omarchy-settings configures swap on zram and tunes memory reclaim for it.
x86_64 gets zram-generator from its installer and new aarch64 installs from
their default packages, but an aarch64 machine installed before
omarchy-aarch64.packages named it has no generator, so the configuration asks
for a device nothing creates.
Migration 1790328426 installs zram-generator where the platform's default
packages name it and it is missing, and starts the zram swap wherever it is
down, unless no device is configured (then the generator makes no swap unit)
or the administrator masked it. A swap that won't start, or whose unit can't
be read, only warns: the generator's unit starts with every boot, so a reboot
retries it, and failing the migration would stop every update. A failed
install waits (75) for the next migrate, as it does where the platform can't
be told, changing nothing. It keeps the name it has in omarchy-mac, so Macs
that already ran it skip it. It also retires an /etc copy of the drop-in
identical to the packaged one, which earlier Mac setups made and which would
hide the packaged file's updates; an edited copy stays. On x86_64 the default
packages don't name the generator and there is no copy, so it does nothing.
* Keep an ARM machine's repositories when it changes channel
omarchy-refresh-pacman and install finalization copied x86_64 templates
everywhere, so on an aarch64 machine a channel change or a finished install
wrote Arch Linux's x86 [core]/[extra]/[multilib] and dropped Arch Linux ARM
and the platform's own repositories.
Channel changes now tell the platform apart. x86_64 is unchanged. On aarch64
the machine's configuration is kept, with its repositories, mirrors and
signature policies, and only the [omarchy] server moves to the new channel;
a configuration whose Omarchy server can't be identified is refused
unchanged, and one with no Omarchy repository gets it at the end (not on
Apple Silicon, whose own repository must not come first). Only pacman.conf is
backed up and rewritten, straight from this process through sudo, never
through a file another process could change first.
Before that, a channel must be qualified for the platform: a signed upgrade
and reboot tested there, not only a published repository. x86_64 keeps
stable, rc and edge; Snapdragon and other aarch64 machines take edge, as
dragon does; Apple Silicon takes none until the Mac packages qualify on edge.
The refresh then checks, as the user, that the channel's omarchy.db
publishes the runtime pair, and on Apple Silicon omarchy-mac and
omarchy-mac-boot. omarchy-channel-set refuses an unqualified channel before
anything else, the dev confirmation included.
Install finalization writes a whole template, as before on x86_64. Other
aarch64 platforms get Arch Linux ARM (dragon's pacman-aarch64.conf and
mirrorlist-aarch64, byte for byte) with its keyring, plus Omarchy on a
qualified channel. Apple Silicon gets omarchy-mac's template on a qualified
channel and keeps its image's configuration otherwise. In an image build,
finalization leaves the keyring to the machine's first boot, so machines
flashed from one image don't share a pacman master key. On an unqualified
channel, a machine that gets no Omarchy repository is told why.
Co-authored-by: Birk Skyum <74932975+birkskyum@users.noreply.github.com>
Co-authored-by: Jim Martin <1334144+jdvmi00@users.noreply.github.com>
* Keep Arch Linux ARM's signing keys current on ARM machines
omarchy-update-keyring reinstalls archlinux-keyring before every system
upgrade, since keys change without a version bump. An aarch64 machine's Arch
Linux ARM repositories are signed with keys from archlinuxarm-keyring, which
nothing refreshed, so a rotated ALARM key failed the upgrade that followed.
On an aarch64 platform where archlinuxarm-keyring is installed, it is
reinstalled in the same transaction. On x86_64 the keyring step runs exactly
as before, even where that package happens to be installed.
* Mark the runtime's platform files as deciding at runtime
The omarchy-settings recipe leaves the mkinitcpio, Limine, memory and USB
drop-ins out of its aarch64 package, because they used to assume x86_64. That
leaves an aarch64 install without the HOOKS baseline its initramfs needs, and
without the zram and reclaim settings every other Omarchy machine gets.
Each of those files now decides at runtime whether it applies: the HOOKS
baseline asks the platform, thunderbolt is added only where the kernel has the
module, the Limine files are read only where Limine is installed, the oomd
drop-ins are inert without systemd-oomd, aarch64 installs the zram generator
the zram drop-in needs, and the USB autosuspend option is ignored by a kernel
that builds usbcore in. default/settings-runtime-profile says so, file by
file; a recipe that finds it ships the same files on every architecture
(omacom/omarchy-pkgs#638), and older sources keep today's aarch64 package. A
test checks that every file it names exists and that each runtime decision is
in place.
* Set the wireless regulatory domain from the owner's timezone at first-boot setup
A deferred install (an Apple Silicon image, an OEM ISO install) runs its
hardware steps before the owner picks a timezone, on the UTC placeholder,
which names no country, so install/hardware/set-wireless-regdom.sh leaves the
regulatory domain unset and the radios stay on the world domain. Owner setup
now runs that step again once the owner's timezone is set, and applies it to
the radios through wireless-regdb's helper, since no reboot follows setup. An
up-front install, which picks the timezone before its hardware steps, is
unchanged.
* Ask again for a keyboard layout first-boot setup could not apply
First-boot setup kept going when the chosen layout did not take: loadkeys
errors were ignored, a keymap localectl did not list kept the default, and a
failed or partial write of /etc/vconsole.conf was only logged. The owner then
typed the disk password in one layout while the boot files asked for it in
another, and could only unlock the disk by typing US-style.
The keyboard step now fails closed. On a console loadkeys must succeed, the
keymap must be in localectl's list exactly (a list localectl cannot produce
counts as a failure too, logged apart), and after systemd-firstboot or the
localectl fallback, /etc/vconsole.conf is read back in a clean shell and must
name the chosen keymap with an XKB layout. Any failure is logged, the owner is
told the layout could not be set, and the layout is asked for again, so the
password form is never reached with a layout that did not take.
* Refresh a platform's own signing keyrings before an update
omarchy-update-keyring reinstalls archlinux-keyring (and Arch Linux ARM's on
aarch64) before the system upgrade, so a rotated key never fails that
upgrade's signature checks. A platform's own repository has a keyring of its
own that nothing refreshed: on Apple Silicon, asahi-alarm-keyring for
[asahi-alarm].
A platform package now lists those keyrings in
/usr/share/omarchy-platform/keyrings, one package name per line, and
omarchy-update-keyring reinstalls each one that is installed in the same
transaction. It adds no repository the machine didn't already trust. A line
that isn't one keyring package name is skipped with a warning, so a mistake in
the list can't stop every update. Without the file, as on x86 today, the step
runs as before.
* Drive an untyped default input from the audio panel
Quickshell types only exact media classes, so a virtual source (an
Audio/Source/Virtual: EasyEffects' source, or the microphone mapping a
platform package adds) has no PwNode.audio. With one as the default input the
audio panel showed the input at 0% and its slider changed nothing, the peak
meter stayed flat, the microphone widget read it as muted, and the panel could
not list it unless it was already the default.
Such an input now goes through wpctl for its volume and mute (UntypedInput in
shell/Commons, one reader and one pactl subscribe for the whole shell), the
panel meters it with the new omarchy-audio-source-level, and the input list
takes an untyped node PulseAudio lists as a source.
A platform whose audio runs through its own processing can also name nodes
that are neither devices nor apps in /usr/share/omarchy-platform/audio.json,
which Omarchy ships none of: the panel and the microphone widget leave them
out, and a "replaced" node only while its replacement exists. Without the
file nothing is hidden.
On every machine: the input list leaves out a source whose ports are all
unavailable (an empty headset jack) unless it is the default, as the output
list does for sinks; choosing an input no longer moves a filter's own capture
(a source output with node.link-group), which would feed the filter from the
new input or from itself; the shell's own level meters no longer light the
microphone widget; and omarchy-audio-sink-availability reads pactl in the C
locale for sinks too, since "not available" is translated.
* Give first-boot setup an XKB layout for keymaps systemd cannot map
systemd-firstboot writes an XKB layout only for keymaps listed in
kbd-model-map. Nine the setup form offers are not (Colemak, Azerbaijani,
Bulgarian, Czech, Swiss German, Kyrgyz, Norwegian, Polish, Ukrainian), so it
wrote KEYMAP= alone, the readback refused it, and owner setup could never get
past the keyboard step for them.
Setup now adds the XKB settings itself when firstboot left none, matching the
console map so the shared password types the same on the desktop: kbd's cz is
QWERTY, bg-cp1251 phonetic and azerty French AZERTY, and non-Latin layouts keep
a US layout to switch to, as kbd-model-map's own rows do. A test checks every
layout the form offers ends with an XKB layout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Codex XHigh <noreply@openai.com>
* Leave keys a firmware key turned off dark
The ambient keyboard backlight treated any 0 the keyboard-brightness keys had
not recorded as an accident and relit it within five seconds. Firmware Fn keys
(Fn+Space on ThinkPads and Framework laptops, Fn+F10 on Dells) write the LED
directly, so on those laptops turning the keys off never stuck.
The lock screen's off now records a blank, and only that blank or a 1%
leftover is taken back; any other off is a choice that pauses auto like the
keys do. A wake clears the blank only once the restore succeeded, the command
runs one at a time so a blank racing a wake can't leave the LED and record
disagreeing, and the loop drops a blank once it has taken the keys back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Codex XHigh <noreply@openai.com>
* Drop the optional-install availability guards
Each menu open checked every Install row against the sync databases, which
costs most of a second of pacman work on every machine to hide rows only an
ARM machine is missing. The fix for those is publishing the ARM packages, not
hiding the rows, so this removes omarchy-pkg-available, the Install rows'
availability and architecture guards, and reinstall's skipping of defaults no
repository offers.
The Windows VM row keeps its x86_64 guard, since no package fixes a guest that
needs an x86_64 host, and reinstall keeps its aarch64 channel handling.
This reverts commit aea001cbde4d0852b311ef42b5e8c380c719f833.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Codex XHigh <noreply@openai.com>
* Put the current root back when the factory root cannot take its place
Factory reset moved the running root aside, marked the reset committed, then
renamed the staged factory root to @. If that second rename failed, cleanup
saw a committed reset: it skipped the boot package's rollback and kept the
throwaway LUKS slot, and since the swap had not happened it deleted the staged
root as well, leaving nothing at @.
The reset now commits only once the factory root is at @. A failed activation
renames the old root back first, then cleanup rolls the platform's boot state
back and revokes the throwaway slot. If that rename fails too, both roots are
kept, cleanup still rolls back and revokes, and the error names the rename
that recovers the machine. The generic Limine path has already rebuilt its
boot files from the factory root by then, as it had before this change.
* Leave other recorders alone when the saved recorder pid is stale
A saved pid that no longer named a recorder made status and stop select every
gpu-screen-recorder and wf-recorder the user ran, so stopping could interrupt,
and after five seconds kill, a recording started somewhere else.
A stale pid now means no recording of ours is running: the toggle starts a new
one, and --stop-recording finds nothing to stop. Stop acts on the recorder the
status check selected rather than selecting again. Without a saved pid, as for
a recording started before the pid was saved, every recorder the user runs
still counts.
* Name the audio a wf-recorder recording could not capture
With desktop and microphone audio both requested, wf-recorder records a null
sink fed by two loopbacks, and a loopback that failed to load was ignored: the
recording went ahead without that source, or silent when both failed. A
missing null sink or default device dropped audio just as quietly.
A source that cannot be captured is now left out with a notification naming
it, the loopbacks that did load are unloaded, and the recording carries the
source that remains, or no audio track at all.
* Show the Edge, Spotify and Dropbox installers on x86_64 only
These vendors currently publish Linux builds for x86_64 alone (the AUR's
microsoft-edge-stable-bin and spotify are arch=('x86_64'), and Dropbox lists
no Linux ARM client), so no native aarch64 build is available and choosing
one on an ARM machine only fails. Like the Windows VM row they keep a uname
check, which the menu answers once per open without asking pacman. The other
Install rows are unchanged.
* Revoke the generic reset's throwaway slot when the reset fails
The generic Limine path added its throwaway LUKS slot without recording it,
so a reset that failed before activation never revoked it. Once the factory
root's UKI was on the ESP, a failed activation that put the old root back left
a machine that booted the factory kernel and unlocked unattended with a key
readable on the ESP, while the screen said the current root was back.
The generic slot is now recorded like the platform's and revoked by cleanup
whenever the reset fails before the factory root is active. A failed
activation on that path says the boot files were already rebuilt from the
factory system and to run limine-update before rebooting.
* Clear a stale recorder pid when a recording starts
The recorder's pid is saved only once its file exists. Until then a pid left
by a recording that ended without a stop still counted as stale, so pressing
the toggle again while the new recorder started found nothing of ours and
could start a second recording. Starting a recording now clears that pid,
and during startup the toggle falls back to the user's recorders as before.
* Word the dropped-audio notice for every reason a source is left out
The notice said the dropped source "could not be captured", which was wrong
when the null sink itself failed to load: the microphone was never tried, and
desktop audio recorded alone as it always has. It now says the source could
not be added to the recording, true for a missing device, a failed loopback
and a failed null sink alike.
* Show the Heroic and Minecraft installers on x86_64 only
Heroic publishes Linux builds for x86_64 alone (its arm64 builds are for
macOS and Windows), and Mojang's Linux launcher is a single x86_64 tarball.
They join Edge, Spotify and Dropbox under the same uname check, so every row
whose vendor ships no native Linux aarch64 build is treated alike.
* Ask the recorder script whether its stop has a recording to end
The bar indicator and the menu's Stop Screenrecording row asked the process
helper whether any recorder the user runs was alive, while the toggle's stop
acts only on the recording it saved. With a stale saved pid alongside an
unrelated recorder, both offered a stop that did nothing.
omarchy-capture-screenrecording --status answers with the selection the stop
uses, and both now ask it. Status needs no recordings directory and never
notifies, so the recordings-directory check moved below argument parsing and
skips it.
* Copy every platform's pacman templates into place, as x86_64 does
On aarch64 a channel change edited the machine's pacman.conf in place: an awk
pass found the [omarchy] server and rewrote its channel, appended a section
where there was none, checked the channel's omarchy.db first, and gated it all
on a per-platform table of qualified channels. Install finalization appended
Omarchy to a template, or on a Mac copied one bundled inside omarchy-mac. What
a machine ended up with was never in the repository.
Each platform now has a pacman.conf and mirrorlist per channel, copied whole:
x86_64's stay in default/pacman, Snapdragon and other aarch64 machines use
default/pacman/aarch64, and Apple Silicon default/pacman/apple-silicon, with
Omarchy and Asahi ALARM ahead of Arch Linux ARM. Omarchy publishes aarch64
packages on edge alone so far, so every ARM channel points at edge for now and
channel changes work there; moving a channel is a template edit. A channel
without both files is refused before anything changes, including a dev
checkout's own templates. Reinstall goes back to resetting to stable, and the
update confirmation loses the missing-repository notice it no longer needs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Codex XHigh <noreply@openai.com>
* Revert "Copy every platform's pacman templates into place, as x86_64 does"
This reverts commit 9a07e138cc6c3a19b58d2f3d7eb536dd3042ccc5.
* Copy every platform's pacman templates into place, as x86_64 does
On aarch64 a channel change edited the machine's pacman.conf in place: an awk
pass found the [omarchy] server and rewrote its channel, appended a section
where there was none, checked the channel's omarchy.db first, and gated it all
on a per-platform table of qualified channels. Install finalization appended
Omarchy to a template, or on a Mac copied one bundled inside omarchy-mac. What
a machine ended up with was never in the repository.
Each platform now has a pacman.conf and mirrorlist per channel, copied whole:
x86_64's stay in default/pacman, Snapdragon and other aarch64 machines use
default/pacman/aarch64, and Apple Silicon default/pacman/apple-silicon, with
Omarchy and Asahi ALARM ahead of Arch Linux ARM. Omarchy publishes aarch64
packages on edge alone so far, so every ARM channel points at edge for now and
channel changes work there; moving a channel is a template edit. A channel
without both files is refused before anything changes, including a dev
checkout's own templates. Reinstall goes back to resetting to stable, and the
update confirmation loses the missing-repository notice it no longer needs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Codex XHigh <noreply@openai.com>
* Drop the migrations no installed machine needs
Fresh installs mark every migration done, and every Apple Silicon machine is a
fresh install, so the Mac handoff to omarchy-mac-boot (and the migrate
operation it called), zram for aarch64 installs that predate the package list,
the Brave Widevine link and the Broadcom migration's Apple Silicon guard never
run anywhere. The exit-75 deferral in omarchy-migrate existed only for two of
them. Keyboard backlight auto stays on new installs through first run rather
than switching on for existing ones, and migration 1786605598 goes back to
quattro: the mkinitcpio drop-ins arrive by package.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the generic changes Mac support doesn't need
The pacman platform guard (and the detector copy omarchy-settings shipped for
it, which the HOOKS baseline fell back to), the lint against uname gates, first
run staying pending after a failed finalization, run_logged echoing failures to
stderr, half-up battery rounding, hiding empty-jack inputs and leaving a
filter's capture alone when choosing an input all rode along with the Mac work
without serving it. Each goes back to quattro's behaviour and can come back on
its own merits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the platform Hyprland slots
A platform package could load its own Hyprland binds, settings and gestures:
binds that replaced Omarchy's chords and decorated every later bind, settings
ahead of the theme, and gestures after the user's files, which needed every
hl.gesture call wrapped so a default could step aside. On a Mac those carried
macOS habits (a three-finger workspace swipe, tap-to-click off, menus opening
on the built-in screen, other screenshot and keyboard-backlight chords), not
anything the hardware needs, and Omarchy should behave the same on every
machine. The one bind a Mac does need, its lid switch under the SMC's name,
joins Omarchy's own lid binds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep aarch64 machines off the release channels until a release supports them
Every aarch64 channel's template pointed at the edge repository, but a switch
to stable or rc installs the release-named omarchy and omarchy-settings. On
edge/aarch64 those are the 4.0.4 release line, which has no omarchy-hw-platform,
lifecycle dispatch or omarchy-pkg-defaults, so `omarchy-channel-set stable` on
a Mac replaced the quattro runtime it runs with one that cannot run it, and
succeeded.
aarch64 platforms now have edge templates alone, so a switch to stable or rc is
refused before anything changes; adding those templates once a release
supports aarch64 opens them. Refresh with no channel named, as reinstall runs
it, and install finalization for a channel the platform has no templates for
take the platform's default channel: stable on x86_64, edge on aarch64.
* Leave a filter's own capture alone when choosing an input again
d0b94d98c returned omarchy-audio-input-set-default to moving every source
output, as not serving Mac support. It does: asahi-audio's microphone DSP on
Apple Silicon records the raw array through a filter-chain capture stream
(audio_effect.jNNN-mic, node.link-group "filter-chain-..."). On an M1 Pro,
choosing the Mac's microphone in the audio panel moved that stream onto the
DSP's own output, and the microphone recorded digital silence (-91 dB, from
-55 dB of room noise) until PipeWire restarted. With the skip it keeps
recording (-54 dB).
This restores the skip of source outputs carrying node.link-group, and its
test, as they were before that commit.
* Say aarch64 offers edge alone where the templates are described
The aarch64 edge templates, the template helper and the update-process docs
still said every platform has a template per channel and every ARM channel
installs from edge, which the previous commit made untrue.
* Point the Mac packages at omacom/omarchy-mac-pkgs
omarchy-mac and omarchy-mac-boot now live in omacom/omarchy-mac-pkgs, with
each package at the top level. The dispatcher, its documentation and the
Apple Silicon package list name that repository, and the drop-in test's
fixtures, byte for byte the same as omarchy-mac-boot/files/etc/mkinitcpio.conf.d
at 4399105, cite it there.
* Stop naming a platform migration among the dispatcher's callers
The migrate operation went with the Mac migrations, and no caller hands a
machine to a platform migration any more, so the header lists only the
flows that still dispatch. The optional-operations comment is rewrapped.
* Keep the Intel Mac Broadcom migration off Apple Silicon again
A fresh install marks every migration done only for the user it creates, so
an account added later runs them all on its first update. On an Apple
Silicon Mac this one matches: an M1 Pro reports sys_vendor "Apple Inc." and
a BCM4387 (14e4:4433), so it would append feature_disable=0x82000, which
stops that chip scanning once brcmfmac reloads. Restore the guard and its
test case.
* Say when Steam's post-install hook runs now that the drivers go first
Steam's installer now adds the 32-bit drivers before Steam itself, so the hook runs after both and before the first launch.
* Release fallback audio after the recorder exits
When wf-recorder ends outside the normal Stop path, status rejects the saved PID before unloading the combined-audio loopbacks. Release those owned modules when the saved recorder is gone, so the next status or stop call ends microphone capture without signaling another recorder. Leave a mix without a saved PID alone: its recorder can still be starting.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
Co-Authored-By: Codex Medium <noreply@openai.com>
* Serialize recording state changes and stale audio cleanup
Status can finish checking an exited recorder after another command has replaced its audio modules, and stop finalization can outlive the recorder while a new recording starts. Share a lock across start, stop and cleanup so each command finishes updating its resources before another changes them. Status uses a read-only check when the lock is busy, keeping the bar responsive during the picker. Close the lock descriptor in persistent children so recording and preview cleanup cannot retain it.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
Co-Authored-By: Greptile <165735046+greptile-apps[bot]@users.noreply.github.com>
* Keep automatic and manual keyboard brightness updates together
A brightness key can update the LED and its chosen-level record after the automatic loop checks for a manual change but before it applies a new target. The automatic write then overwrites the user's choice and deletes the record. Take the manual command's lock for the whole tick, skipping a busy tick and releasing the descriptor on every return. Create the private fallback directory before opening the lock outside a session runtime directory.
The normal lock screen waits five seconds before blanking, so an ordinary tick should already see the session locked. The regression exercises a brightness key arriving within a tick instead of relying on an implausibly delayed lock-state check.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 High via Pi <noreply@anthropic.com>
* Read the split hook baseline in the NVIDIA migration
The NVIDIA firmware migration decides whether to rebuild by sourcing the hardware and filter drop-ins. With HOOKS now defined in the earlier baseline, that partial read treats every hybrid machine as if kms had been removed. Source the new baseline first when it exists, keeping the legacy two-file layout working and skipping rebuilds when the effective hooks still include kms.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 High via Pi <noreply@anthropic.com>
* Use a hardware helper for x86-only menu entries
Keep the x86_64 availability checks for Windows and vendor-specific installers in a hardware predicate, so menu conditions use the same command style as other hardware checks.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
* Keep restored keyboard levels from pausing automatic brightness
Idle wake, quick unlock and hibernate can restore a saved level older than the ambient loop current level without the lock blanking first. Treat that restoration as a one-tick event, preserving existing manual pauses and the normal blank-and-restore path. Consume unmatched and unchanged restore records too, so a later firmware key cannot look like the earlier restore.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 High via Pi <noreply@anthropic.com>
* Preserve restored keyboard levels across a later lock blank
The ambient loop skips a locked session, so a restored level may still be unconsumed when the next blank saves it. Carry that origin through blanking and restore failures so fingerprint unlock cannot make the old saved level look like a manual choice. A brightness key replaces the marker with its chosen level and retains the ordinary blank behavior.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 High via Pi <noreply@anthropic.com>
* Preserve firmware brightness choices before a lock blank
Firmware keys change the LED without updating the record. Carry a pending restoration through the next blank only if the observed LED still matches that restoration, or is still zero from its previous blank. A firmware change otherwise follows the ordinary blank-and-restore path so automatic lighting pauses on the chosen level.
Co-Authored-By: GPT-6 in Codex <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 High via Pi <noreply@anthropic.com>
* Change only the disk password in omarchy-drive-password
Changing the system disk's password also set the login and root passwords
to match. That changes account-password policy on every platform, x86
included, and overwrites passwords someone chose to keep different, so it
moves to its own change with an explicit confirm.
The disk change itself stays as it was: the new key must open the disk and
the old one must not before the change counts, the journal finishes an
interrupted change, and where the platform's boot checks prove the key
slots, the owner's new slot is recorded before the run finishes. The
journal's confirmed phase is now "record" and no longer needs a login user.
* Cancel a pending recording start instead of queueing behind it
Starting a recording holds the recorder lock through the picker and until the
recorder creates its file. A second toggle or a stop then waited on that lock,
with no end while a portal pick or a stuck recorder never finished, and once
the start gave up the queued toggle began another recording.
While a start is pending, a toggle or stop that cannot take the lock within a
second now leaves a cancel marker and returns. The start checks it after the
picker, after the webcam overlay and while waiting on its recorder, then stops
that recorder and releases its audio. A recorder other than the portal's that
has not created its file after 15 seconds is stopped and the next backend
tried.
* Move automatic keyboard lighting to its own change
Ambient-light keyboard backlight is a new feature on every laptop with the
sensor, not something Apple hardware needs to run Omarchy, so it leaves this
change for a separate review. The keyboard-brightness command returns to
upstream's version, and first run no longer enables the user service.
* Move workspace refocus on monitor removal to its own change
Keeping the viewed workspace in front after a monitor is unplugged changes
desktop behaviour on every machine, not just Apple hardware, so it leaves
this change for a separate review.
* Move prebuilt-image hardware deferral to its own change
Building an image away from its machine needs a manifest the detector reads,
a queue of hardware steps for the first boot, a first-boot service and a
per-machine pacman keyring. An install on the machine itself needs none of
it, so it leaves this change for a separate review with an installer and
package boundary of its own. Hardware and user setup now run where they are
installed, and the platform setup operations take no image argument.
* Move the Qualcomm platform to its own change
Snapdragon support is separable from Apple compatibility, so the detector no
longer names a qualcomm platform: a "qcom," device tree is generic aarch64,
which Snapdragon already behaves as everywhere else here, and a tree naming
both Apple and Qualcomm is still refused. linux-firmware-qcom's platform list
leaves with it.
* Keep a cancel that arrives while a recording start finishes
A stop could land after the start's last cancel check, while it saved its
recording as started, and be dropped with the marker. The start now removes
its starting marker before a final check, a request reads that marker only
after leaving its own, and one that finds the start gone waits for the lock
and acts unless the start already used its request. A recorder ended by a
cancel or a readiness timeout gets two seconds after TERM before KILL, so a
recorder ignoring TERM cannot hold the start and its lock.
* Defer an image build's hardware setup to the machine's first boot
Brings back prebuilt-image support split out of #14431 so it gets its own review. An image built away from its machine names its target in a root-owned manifest the detector reads; hardware setup is queued for the machine's first boot, run there by omarchy-provision-hardware, which also makes the machine's own pacman keyring; and the platform setup operations learn they run on an image's first boot. Apple Silicon images built by the omarchy-mac installer need this; an install on the machine itself does not.
* Rebuild the initramfs when deferred setup changes module options
mkinitcpio's modconf hook copies /etc/modprobe.d into the initramfs, but the
deferred first-boot setup only compared mkinitcpio's configuration and the
kernel command line when deciding whether to rebuild. A step that only wrote
module options, as nvidia.sh does, left the old ones in the boot image.
* Put the Omarchy repository first on aarch64, as on x86_64
quattro now searches [omarchy] before the Arch repositories (
|
||
|
David Heinemeier Hansson
|
54e3b53b88 |
Make application transparency opt-in (#14253)
* Make application transparency opt-in * Use the transparency helper for Kanagawa * Address transparency review findings * Toggle transparency for opaque windows too |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
773e19e145 |
Drive Elsewhen from the keyboard and summon it with Super+Ctrl+Alt+E (#13445)
* Navigate Elsewhen from the keyboard and summon it with Super+Ctrl+Alt+E Up and down walk home and the cities, lighting the picked row and turning the globe to it. Left and right move the clocks an hour, held until Escape or close. Escape now clears a shifted time before leaving the globe. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Reach Add a city from the keyboard and shift time past a day Down past the last city selects Add a city, where Return or Space opens the search. The arrow keys no longer stop at twelve hours, and shifts past a day read in days. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Delete the picked Elsewhen city from the keyboard Delete (or x) removes the picked city and moves the cursor to the one that takes its place. The picked row shows its × so the target is plain. Delete now reaches every panel's deleteRequested, as it already does in the clipboard and the menu. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Center bar glyphs on the open-panel underline The 16px icon canvas in the 27px slot was snapped from 5.5 to 6, and the glyph's fractional centering correction was snapped too, so glyphs sat up to 0.9px right of the underline, which centers on the slot. Both are now placed exactly, and the geometry test measures against the slot to within 0.05px. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
804749970a |
Handle volume, media and notification keys in the shell (#13424)
* Step the volume in the shell instead of a script per keypress Each volume key ran omarchy-audio-output-volume: several pactl calls in bash, then omarchy-osd delivering the OSD over a qs IPC client, ~165ms from keypress to OSD, on keys that repeat while held. The volume up, down and mute keys now dispatch global shortcuts that the media service handles over PipeWire, stepping, clamping, unmuting and debouncing by the script's rules and showing the same OSD. It acts only when the default sink is an ALSA sink, which is its own physical sink. Any other default, a DSP chain or EasyEffects above all, falls back to the script, which resolves the physical sink from the live routing on every press. The precise +1/-1 keys still run the script. Keypress to OSD drops from ~168ms to ~20ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Run media and notification keys in the shell without an IPC client The media keys and the notification dismiss, invoke and history keys ran omarchy-shell, starting a qs client for one argument-free IPC call. A new ipc shortcut kind names such a call as target.method. The shell hands it to the service that owns the target, which runs its own IpcHandler function, so the key behaves exactly as the omarchy-shell call did. A call missing from the list binds through omarchy-shell. Dismissing a notification with SUPER+comma clears the popup in ~11ms instead of ~40ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5.5
|
6762769bbf |
Open shell menus and panels through Hyprland global shortcuts (#13418)
Every binding that opened a menu or panel ran omarchy-menu or
omarchy-shell, which starts a qs client just to deliver one IPC call:
~60ms before the shell heard about the keypress.
The shell now registers a Hyprland global shortcut for each menu route
and panel in default/omarchy/shortcuts, and o.bind turns { menu = ... }
and { panel = ... } into hl.dsp.global for those, so a keypress spawns
nothing. A route or panel missing from the list binds through the
command as before. The default menu and panel bindings use the new form.
SUPER+SPACE opens the menu in ~31ms instead of ~94ms, measured from a
simulated keypress until the menu layer maps.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
David Heinemeier HanssonandClaude Opus 5
|
a7486beb60 |
Add Super + Ctrl + Alt + F to toggle a full screen desktop (#10672)
Hiding the top bar and removing the window gaps are the two things you do to give the screen entirely to your windows, and doing both took two hands and two hotkeys. `omarchy toggle fullscreen desktop` does them together. It only leaves full screen when both halves are in it, so hitting the hotkey with just the bar hidden (or just the gaps gone) pulls the other half into line instead of flipping the one you already set. Claude-Session: https://claude.ai/code/session_01JB9phxP56gnP7qSidkkUJE Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
9502b81f3b |
Reshape the agent launcher into omarchy agent (#6757)
* Reshape the agent launcher into omarchy agent omarchy-launch-agent becomes omarchy-agent, with prompts on omarchy-agent-prompt rather than the bare route: `omarchy agent` is both a command and a group, so a positional prompt there would shadow any subcommand under it. The launcher takes flags only and points at `omarchy agent prompt` when handed one. Every agent window now launches under a fixed org.omarchy.agent app-id instead of omarchy-launch-tui's default of org.omarchy.<binary>, so one rule floats them all whichever agent is default. Omarchy also stops picking an agent for you. omarchy-default-agent prints nothing until one is chosen, leaving every entry under Setup > Defaults > Agent unchecked, and a first-run invitation offers to take you there. * Wordsmith * Cover the agent routes and the invitation The route split is the point of the change, so exercise `omarchy agent`, `omarchy agent prompt`, and a rejected positional prompt through the router rather than only the binaries behind them. The invitation gets the same treatment as the Voxtype and fingerprint ones: it notifies once, opens the agent defaults menu, and leaves both the notification and the marker alone for anyone who already chose an agent. * Offer the agent choice from the keybinding Super + Shift + Ctrl + A now runs `omarchy-agent --pick`, which opens Setup > Defaults > Agent when nothing is chosen yet. A keypress that writes to stderr and opens nothing just looks broken. * Reach existing installs with the agent invitation first-run installs the invitation hook, and existing accounts marked it complete long ago, so they would never see it -- while being the accounts most likely to need it, since the old getter returned opencode implicitly and most have no agent recorded at all. Post-update hooks run later in the same update, so the invitation arrives without waiting for another one. * Say what the Defaults submenus set Setup > Defaults lists Agent, Browser, Terminal, Editor, but the header inside each repeated the same bare word, which reads as a category rather than a setting -- and says nothing at all when the menu is summoned straight into it. The list keeps its short labels; the headers now name the setting. |
||
|
David Heinemeier HanssonandClaude Opus 5
|
5edc3497fa |
Bind SUPER + CTRL + a number to the bar's right panels (#6702)
The letters name a panel; the numbers count them. One is the leftmost panel in the right section, so the number matches the icon a user would point at: a widget with no panel of its own is passed over, and so is one that is hiding itself. Counting rather than naming means the hotkeys follow the bar. Rearranging the section, or adding a widget to it, renumbers the panels with no binding to rewrite. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
383addc8c4 | Rearrange keybindings presentation | ||
|
David Heinemeier HanssonandClaude Opus 5
|
199bd01f94 |
Reach every window the region picker can highlight
Warping to a target window's center selects the wrong window when a smaller one covers that center: slurp keeps highlighting the coverer, so Tab could never leave it. Navigation now warps to the most central point that resolves back to the target, and skips windows that hovering could not reach either. Unbinding the picker's transient keys by name also took a same-key binding out of the user's own config with it; the bind handles are now kept and removed individually. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
366c708e44 |
Keyboard window capture in the region picker: Return, Tab, arrows (#6466)
* Keyboard window capture in the region picker: Ctrl+Return, Tab, arrows Return already captures the entire focused monitor while slurp is open, but grabbing a single window required the mouse: hover highlights a window, a click captures it. Now the keyboard can do the same. Ctrl+Return captures the selected window — the one under the cursor, falling back to the focused window. Tab and Ctrl+Tab cycle that selection through the workspace's windows in reading order, and the arrow keys move it spatially; both warp the cursor to the target window's center, so slurp's own hover highlight tracks the selection. Ctrl+Return is implemented like --take-fullscreen: a layer-scoped bind flags the intent via a marker file and dismisses slurp, and the picker resolves the window under the cursor. On an empty workspace the pick resolves to nothing and exits as cancelled. Ctrl is the chord modifier because slurp reacts to held Shift by squaring the selection's aspect ratio, which visibly reshapes the hover highlight mid-chord. None of the keys slurp itself uses (Escape, held Space to move a selection, held Shift) are bound, so its own keyboard behavior is unchanged. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Resolve overlapping windows the way slurp highlights them slurp highlights the smallest box under the cursor, but the capture and selection hit-tests returned the first geometric match in hyprctl clients order. With a floating window over a tiled one, Ctrl+Return could capture the window underneath the visibly highlighted one. Track the smallest containing window instead, in both the capture resolution and the selection-movement origin. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Document the region picker's keyboard modes in its usage line Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Resolve keyboard capture and navigation from one rectangle list Duplicate window geometry (tabbed groups, stacked floating windows) stalled the Tab cycle on the first copy, and the smallest-window-under-cursor tie-break was applied to two differently ordered lists, so navigation could cycle from one window while Ctrl+Return captured another. Ctrl+Return over a gap or an empty workspace also ignored the monitor rectangle slurp was highlighting. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Capture the highlighted window with Return, the display with Ctrl+Return The picker highlights a window under the cursor far more often than a whole display, so the unmodified key takes the highlighted rectangle. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> Co-authored-by: David Heinemeier Hansson <david@hey.com> |
||
|
David Heinemeier Hansson
|
03b825f59a |
Show Herdr keybindings with SUPER + CTRL + K
Mirrors the Tmux keybindings menu on SUPER + ALT + K. Herdr has no CLI that dumps resolved bindings, so the action list and its defaults come from `herdr --default-config`, where every action appears as a commented assignment, and the user config overrides what it sets. Prose in that default config can read like an assignment, as in `# type = "popup" opens a session-modal terminal`, so a line counts only when its value is a bare string or an array of them. Both TOML quote characters open a string, and with no config file at all the listing shows Herdr's own defaults rather than the Omarchy seed config Herdr never loaded. |
||
|
David Heinemeier Hansson
|
11a6ae2230 | Move calculator to Super + Ctrl + Q to avoid conflict with resizing | ||
|
David Heinemeier HanssonandClaude Fable 5
|
b92510f4f5 |
Bind Super + Alt + Space to the apps menu
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
5ea4fb56f4 | Add default agent shortcuts | ||
|
David Heinemeier Hansson
|
929eca317d | Add a Super + Shift + = hotkey for calculator | ||
|
David Heinemeier Hansson
|
1f8819318d | Switch to Omacalc | ||
|
David Heinemeier Hansson
|
bdcdfeb428 | This tmux alert system didn't work as nicely as I imagined | ||
|
David Heinemeier HanssonandClaude Opus 5
|
e2d655d265 |
Add a calendar popup to the clock
Clicking the clock reveals a month grid with ISO week numbers, a year progress meter, and month stepping. Right click walks the common label formats and writes the chosen one back to shell.json, so the bar shows what the config stores. The week start toggles from the grid's "W" heading and persists as weekStartDay, defaulting to the locale's own first day. Rich popup widgets live in their own plugin directories, so the clock moves out of bar/widgets/ into panels/clock/. The id is unchanged, so existing layouts and centerAnchor keep working. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
9ddcec272d |
Lock the screen before suspend instead of racing logind for it
Closing the lid could suspend the machine with the session still exposed. omarchy-sleep-lock held a delay inhibitor and waited for Quickshell to report the session secure, but a delay inhibitor is a timer rather than a promise: logind suspends once InhibitDelayMaxSec expires, locked or not. The default is five seconds, and closing the lid also reconfigures displays -- exactly when the lock service is waiting for the screen set to settle before it can secure. The race is now off the critical path. switch:on:Lid Switch runs omarchy-system-lid-close, which requests the lock the moment the lid closes, before logind has decided to suspend at all, so the inhibitor window usually finds the session already secure. A docked lid close does not suspend (HandleLidSwitchDocked defaults to ignore) and must not lock either, since that is clamshell mode still in use on the external display, so the handler gates on the same closed-and-undocked pair logind itself keys on. Suspends that never touch the lid -- idle timeout, the system menu, low battery -- still arrive through the inhibitor, so that path gets room to work too. The shipped drop-in raises InhibitDelayMaxSec to 15s, and the helper derives its budget from logind's live InhibitDelayMaxUSec rather than assuming the drop-in landed: a machine that has not reloaded logind yet, or that carries its own override, gets a budget that fits what logind will actually allow. It leaves logind a fifth of its own window and caps at 12s, so a hand-raised window cannot strand a closed laptop awake in a bag. The wait itself had three defects. Its deadline arithmetic read EPOCHREALTIME assuming a period, so under any comma-decimal locale the subtraction parsed as bash's comma operator and silently voided the deadline, leaving only the attempt counter to stop it. The lock request shared the status polls' timeout and exited on first failure, so a shell 300ms slow meant suspending unlocked; it now has its own budget and is simply retried, since asking again is idempotent. And a refusal the shell reports on stdout with a zero exit -- missing-pam -- read as success, burning the whole window on a lock that could never happen. Every call is bounded by what is left of the budget rather than by an estimate of what the step should cost, so the deadline holds on hardware slower than anything the constants were fitted to. Failure is still possible and it used to be silent. It now writes to the journal and raises a critical notification, which lands on the screen the user unlocks into. Incidentally, monitor-recovery-test asserted lid probing against omarchy-hw-clamshell after that logic moved to omarchy-hw-laptop-closed. It aborted the file under set -e, skipping the nine assertions behind it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
5952c016a6 |
We don't need these
Enough to change via Omarchy menu |
||
|
David Heinemeier HanssonandClaude Opus 4.8
|
a382be2645 |
Indicate and jump to tmux panes waiting for attention
Show a bar indicator whenever tmux has flagged a window, the same state that highlights the tab, and jump to it on click or with Super + Ctrl + J. Tmux hooks push the state to the shell, so nothing polls while no pane is waiting. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
7a9947a732 |
Combine the Omarchy menu and the launcher
Now that we can deep search, they don't need to be different |
||
|
David Heinemeier Hansson
|
ca0cf8bff9 | Fix webcam resize controls and placement | ||
|
David Heinemeier Hansson
|
1174f2a70b | Add live webcam overlay sizing | ||
|
David Heinemeier Hansson
|
182330465a |
Simplify omarchy-bar into a bar-settings and bar-plugin split
The omarchy-bar command had grown three overlapping ways to inspect the bar (show/layout/list/options, plus selected/active/available/widgets aliases) and mixed layout mutation in with bar-level settings. Untangle it into two focused commands: - omarchy-bar keeps only the bar-level settings that write shell.json: use, reset, position, transparent, and settings. reset now delegates to `use omarchy.bar` rather than duplicating the del(.bar.id) write. - omarchy-bar-plugin owns all layout mutation: add, move, remove, set, and replace, with the placement flags and jq resolve/anchor helpers. `omarchy bar plugin ...` routes here via the dispatcher. Drop the inspection commands entirely: the layout is visible on the bar, the config is shell.json, and widget/option ids come from `omarchy plugin list`. Nothing consumed the show output programmatically except tests. This also removes omarchy-bar-position, whose jq write was a duplicate of `omarchy bar position`. Strip environment-invariant guards (require_command, require_omarchy_path) that defended against jq or OMARCHY_PATH being absent — neither happens on a real system. Keep the user-input validation (--section/--index) and the atomic shell.json write. Update callers (service install/remove, refresh-shell, plugin-clone, plugin enable), keybindings, the menu, tests, and docs to the new split. |
||
|
David Heinemeier Hansson
|
ad8ab1a7fa | Rename text capture command | ||
|
David Heinemeier Hansson
|
aabae6fffe | Group all the omarchy-bar bins together | ||
|
David Heinemeier HanssonandClaude Fable 5
|
e1cdc9005e |
Route panel hotkeys through the shell IPC target so they survive reloads
Bar-widget panels (audio, bluetooth, network, power, monitor) used to be toggled via their own per-plugin IpcHandler targets. Quickshell resolves duplicate targets first-handler-wins, so after a plugin or bar reload the stale handler of the destroyed widget instance kept claiming the target and the hotkeys went dead. The shell root's IpcHandler lives outside the reload cycle, so summon, hide, and toggle now go through `omarchy-shell shell toggle <plugin>` and the shell routes to the live widget instance via the bar's slot registry. Panel plugins that are also panel/overlay/menu kinds keep using the panel loader path. Failures to find a live widget are logged so a widget missing from the bar layout stays diagnosable. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Fable 5
|
1e996609a0 |
Capture the entire screen with Return during a region pick
A previous submap attempt was brittle because the script owned the keyboard state: if it died between enter and exit, the submap stuck. This version lets the compositor own both edges. The Lua config binds plain Return when a layer surface with slurp's "selection" namespace opens and unbinds it when the last one closes, so the bind exists exactly while a pick is on screen. slurp dying for any reason (cancel, crash, pkill, SIGKILL of the picker) fires layer.closed and the bind evaporates — there is no code path where it leaks. Return invokes omarchy-capture-region --take-fullscreen, which flags a marker in XDG_RUNTIME_DIR and dismisses slurp; the picker treats an empty slurp result with a fresh marker as the focused monitor, reusing the existing fullscreen path. Since monitor focus follows the cursor, that is the monitor under the slurp crosshair. The recording flow gets monitor:NAME from the existing match, so Return during a recording pick starts a native full-monitor capture. The signal mode no-ops unless slurp is actually running, and both the signal protocol and the layer-scoped bind lifecycle are verified live: bind present only while slurp is open, real picks resolved by the signal on both the screenshot and recording paths, no leftover binds. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
aa7350ab60 | Fix clamshell display recovery | ||
|
Ryan Hughes
|
4cd6593ba3 | Use plugin IPC routes | ||
|
David Heinemeier Hansson
|
8510a81921 | Toggle weather panel from shortcut | ||
|
David Heinemeier Hansson
|
190c31503c | Merge branch 'dev' into omarchy-shell | ||
|
Pavel Kadera
|
b911a6f8ba | Only bind F9 to Voxtype if installed (#5882) (#5897) | ||
|
David Heinemeier Hansson
|
ed3320cb8d | Just emojis | ||
|
David Heinemeier Hansson
|
41425481db | app-launcher to just launcher | ||
|
David Heinemeier Hansson
|
ea1b0e7ced | Extract panels out into their own top-level concern | ||
|
David Heinemeier Hansson
|
97d4e908af | Use the helpers where applicable | ||
|
David Heinemeier Hansson
|
abf0a68b54 | Drop walker + elephant | ||
|
David Heinemeier Hansson
|
196dcd2472 | Open power panel on super + ctrl + p | ||
|
David Heinemeier Hansson
|
bbdc485a62 | Open the right panels | ||
|
David Heinemeier Hansson
|
b0f5d941ba | Switch to running quickshell as a systemd service that is auto-restarted if it crashes | ||
|
Ryan Hughes
|
ae17436089 | Update bindings | ||
|
Ryan Hughes
|
e3fff41c0e |
Keyboard-driven wifi panel
The wifi panel was a bar-widget xdg-popup which Hyprland doesn't grant keyboard focus to until the user clicks or hovers it — keys typed after a SUPER+CTRL+W summon went to whatever previously had focus. New shared Common.KeyboardPanel scaffolding: layer-shell PanelWindow with WlrKeyboardFocus.Exclusive (granted at map time, the protocol-level equivalent of focus-on-launch for xdg-toplevels), full-screen anchored with a Region mask that subtracts the bar strip so bar widgets stay clickable, MouseArea for outside-click dismissal, TransformWatcher for reactive anchor-position tracking. API is a subset of Common.PopupCard (no centerOnBar / triggerMode / containsMouse yet — adding when the other bar popups migrate). networkPanel.qml uses it. Adds full keyboard navigation: j/k or Up/Down — move selection Return/Space — connect (or disconnect if already connected) x — forget the highlighted network r — refresh scan Esc — close ListView (with positionViewAtIndex on currentIndex) replaces the Repeater+Column inside Flickable so the selected row stays visible as j/k walks past the cap. A 1.5s Timer re-polls detailsProc while open so the connection details (IP, gateway, signal) populate when routing actually comes up after a connect rather than waiting for re-summon. Rows: lock glyph on the right for protected-and-not-connected, X (forget) for connected — aligned to the same 22-wide column. Connect glyph in the passphrase prompt switched to a check, no separate cancel (Esc handles it). SUPER+CTRL+W in utilities.lua now toggles this panel via omarchy-shell-ipc instead of launching Impala. Right-click on the bar icon still launches Impala as a fallback for hidden SSIDs / enterprise auth / iwd edge cases. |
||
|
David Heinemeier Hansson
|
25c718e3df | Add QS emoji picker | ||
|
David Heinemeier Hansson
|
52ce411c2b | Use our built-in notifications | ||
|
David Heinemeier Hansson
|
80da45dd1c | Use the new weather overlay instead | ||
|
David Heinemeier Hansson
|
f7f2838776 | Hyprland expects lowercase comma | ||
|
Ryan Hughes
|
679e14c37f |
Restore menu toggle behavior on keybinds and bar clicks
The old bash bin short-circuited with close_visible_quickshell_menu at the top of open_quickshell_menu, so pressing any menu keybind while the menu was open just closed it. The IPC path I introduced summoned every time, so keyboard shortcuts couldn't dismiss \u2014 only outside clicks did (which is why the bar icon appeared to toggle: clicking it while the menu was open hit the menu's outer-click MouseArea, not the icon). Add a menu.toggle IPC method: - if root.opened: cancel() and return "closed" - otherwise: behaves exactly like summon Switch every Hyprland binding and the two bar-icon click handlers (omarchy logo, battery right-click \u2192 power menu) to toggle. summon stays as the always-open primitive for callers that want explicit summon semantics (rare \u2014 right now nothing internal uses it). |