Merge pull request #5280 from basecamp/rc

Omarchy 3.5.1

bin/omarchy-ac-present

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Returns true if AC power is connected.
+
+for ac in /sys/class/power_supply/AC* /sys/class/power_supply/ADP*; do
+  [[ -r $ac/online && $(cat "$ac/online") == "1" ]] && exit 0
+done
+
+exit 1

bin/omarchy-battery-monitor

@@ -9,6 +9,7 @@ BATTERY_STATE=$(upower -i $(upower -e | grep 'BAT') | grep -E "state" | awk '{pr
 
 send_notification() {
   notify-send -u critical "󱐋 Time to recharge!" "Battery is down to ${1}%" -i battery-caution -t 30000
+  omarchy-hook battery-low "$1"
 }
 
 if [[ -n $BATTERY_LEVEL && $BATTERY_LEVEL =~ ^[0-9]+$ ]]; then

bin/omarchy-battery-remaining-time

@@ -5,12 +5,18 @@
 battery_info=$(upower -i $(upower -e | grep BAT))
 
 echo "$battery_info" | awk '/time to (empty|full)/ {
-    hours = int($4)
+    value = $4
-    minutes = int(($4 - hours) * 60)
+    unit = $5
-    if (minutes > 0) {
+    if (unit ~ /^minute/) {
-        printf "%dh %dm", hours, minutes
+        printf "%dm", int(value)
     } else {
-        printf "%dh", hours
+        hours = int(value)
+        minutes = int((value - hours) * 60)
+        if (minutes > 0) {
+            printf "%dh %dm", hours, minutes
+        } else {
+            printf "%dh", hours
+        }
     }
     exit
 }'

bin/omarchy-brightness-keyboard

@@ -23,14 +23,19 @@ fi
 max_brightness="$(brightnessctl -d "$device" max)"
 current_brightness="$(brightnessctl -d "$device" get)"
 
-# Calculate step as one unit (keyboards typically have discrete levels like 0-3).
+# Calculate step as 10% of max brightness. Keyboards with many levels (e.g. 512)
+# need larger steps; keyboards with few levels (e.g. 3) fall back to step=1.
+step=$(( max_brightness / 10 ))
+(( step < 1 )) && step=1
+
 if [[ $direction == "cycle" ]]; then
-  new_brightness=$(( (current_brightness + 1) % (max_brightness + 1) ))
+  new_brightness=$(( current_brightness + step ))
+  (( new_brightness > max_brightness )) && new_brightness=0
 elif [[ $direction == "up" ]]; then
-  new_brightness=$((current_brightness + 1))
+  new_brightness=$(( current_brightness + step ))
   (( new_brightness > max_brightness )) && new_brightness=$max_brightness
 else
-  new_brightness=$((current_brightness - 1))
+  new_brightness=$(( current_brightness - step ))
   (( new_brightness < 0 )) && new_brightness=0
 fi
 

bin/omarchy-cmd-audio-switch

@@ -2,7 +2,7 @@
 
 # Switch between audio outputs while preserving the mute status. By default mapped to Super + Mute.
 
-focused_monitor="$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+focused_monitor=$(omarchy-hyprland-monitor-focused)
 
 sinks=$(pactl -f json list sinks | jq '[.[] | select((.ports | length == 0) or ([.ports[]? | .availability != "not available"] | any))]')
 sinks_count=$(echo "$sinks" | jq '. | length')

bin/omarchy-cmd-mic-mute

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+# Toggle microphone mute. Dell XPS systems get special handling for the hardware LED.
+
+if omarchy-hw-match "XPS"; then
+  omarchy-cmd-mic-mute-xps
+else
+  swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)" --input-volume mute-toggle
+fi

bin/omarchy-cmd-mic-mute-xps

@@ -0,0 +1,44 @@
+#!/bin/bash
+
+# Toggle microphone mute on Dell XPS systems. Uses wpctl for reliable toggling
+# and syncs the ALSA capture switch so the hardware mic mute LED follows state.
+
+wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle >/dev/null
+
+if pactl get-source-mute @DEFAULT_SOURCE@ | rg -q 'yes'; then
+  alsa_value='off,off'
+  osd_message='Microphone muted'
+  osd_icon='microphone-sensitivity-muted-symbolic'
+else
+  alsa_value='on,on'
+  osd_message='Microphone on'
+  osd_icon='audio-input-microphone-symbolic'
+fi
+
+if [[ -e /sys/class/leds/platform::micmute/brightness ]]; then
+  default_source=$(pactl get-default-source)
+  alsa_card=$(pactl -f json list sources | jq -r --arg source "$default_source" '
+    .[] | select(.name == $source) |
+    .properties["alsa.card"] // .properties["api.alsa.card"] // .properties["api.alsa.pcm.card"] // empty
+  ' | head -1)
+
+  if [[ -n $alsa_card ]]; then
+    cards=("$alsa_card")
+  else
+    mapfile -t cards < <(compgen -G '/proc/asound/card*' | rg -o 'card[0-9]+' | sed 's/card//' | sort -u)
+  fi
+
+  for card in "${cards[@]}"; do
+    while IFS= read -r control; do
+      if [[ $control != *"Jack Microphone"* ]]; then
+        amixer -c "$card" cset "$control" "$alsa_value" >/dev/null 2>&1 || true
+        break 2
+      fi
+    done < <(amixer -c "$card" controls 2>/dev/null | rg -o "name='[^']*Microphone Capture Switch'")
+  done
+fi
+
+swayosd-client \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
+  --custom-message "$osd_message" \
+  --custom-icon "$osd_icon"

bin/omarchy-cmd-screenrecord

@@ -63,7 +63,7 @@ start_webcam_overlay() {
   done
 
   ffplay -f v4l2 $video_size_arg -framerate 30 "$WEBCAM_DEVICE" \
-    -vf "scale=${target_width}:-1" \
+    -vf "crop=iw/2:ih,scale=${target_width}:-1" \
     -window_title "WebcamOverlay" \
     -noborder \
     -fflags nobuffer -flags low_delay \

bin/omarchy-cmd-screenshot

@@ -8,8 +8,8 @@
 OUTPUT_DIR="${OMARCHY_SCREENSHOT_DIR:-${XDG_PICTURES_DIR:-$HOME/Pictures}}"
 
 if [[ ! -d $OUTPUT_DIR ]]; then
-  notify-send "Screenshot directory does not exist: $OUTPUT_DIR" -u critical -t 3000
+  mkdir -p "$OUTPUT_DIR"
-  exit 1
+  notify-send "Created screenshot directory: $OUTPUT_DIR" -u normal -t 2000
 fi
 
 pkill slurp && exit 0

bin/omarchy-font-set

@@ -33,7 +33,7 @@ if [[ -n $font_name ]]; then
     omarchy-restart-swayosd
 
     if pgrep -x ghostty; then
-      notify-send "    You must restart Ghostty to see font change"
+      notify-send -u low "    You must restart Ghostty to see font change"
     fi
 
     omarchy-hook font-set "$font_name"

bin/omarchy-haptic-touchpad

@@ -0,0 +1,94 @@
+#!/usr/bin/env python3
+
+"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
+
+Monitors touchpad button press events and sends haptic pulses via HID
+feature reports. Required because the kernel's HID haptic subsystem only
+supports Auto Trigger with waveform enumeration, not the simpler Manual
+Trigger protocol used by these Synaptics touchpads.
+"""
+
+import fcntl, glob, os, struct, sys
+
+VENDOR = "06CB"
+REPORT_ID = 0x37
+INTENSITY = 40  # 0-100
+
+# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
+EVENT_FORMAT = "llHHi"
+EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
+EV_KEY = 0x01
+BTN_LEFT = 272
+BTN_RIGHT = 273
+BTN_MIDDLE = 274
+
+# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+def HIDIOCSFEATURE(length):
+    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
+
+
+def find_hidraw():
+    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
+        uevent = os.path.join(path, "device", "uevent")
+        try:
+            with open(uevent) as f:
+                content = f.read().upper()
+            if f"0000{VENDOR}" in content:
+                return os.path.join("/dev", os.path.basename(path))
+        except OSError:
+            continue
+    return None
+
+
+def find_touchpad_event():
+    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
+        try:
+            with open(path) as f:
+                name = f.read().strip().upper()
+            if VENDOR in name and "TOUCHPAD" in name:
+                event = path.split("/")[-3]
+                return os.path.join("/dev/input", event)
+        except OSError:
+            continue
+    return None
+
+
+def main():
+    hidraw = find_hidraw()
+    if not hidraw:
+        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
+        sys.exit(1)
+
+    event = find_touchpad_event()
+    if not event:
+        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
+        sys.exit(1)
+
+    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
+
+    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
+    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
+
+    hidraw_fd = os.open(hidraw, os.O_RDWR)
+    event_fd = os.open(event, os.O_RDONLY)
+
+    try:
+        while True:
+            data = os.read(event_fd, EVENT_SIZE)
+            if len(data) < EVENT_SIZE:
+                continue
+            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
+            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
+                try:
+                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
+                except OSError:
+                    pass
+    except KeyboardInterrupt:
+        pass
+    finally:
+        os.close(event_fd)
+        os.close(hidraw_fd)
+
+
+if __name__ == "__main__":
+    main()

bin/omarchy-hibernation-setup

@@ -14,9 +14,22 @@ if ! command -v limine-mkinitcpio &>/dev/null; then
 fi
 
 MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
+SWAP_FILE="/swap/swapfile"
+RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 
 # Check if hibernation is already configured
 if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
+  # Fix empty resume_offset if btrfs map-swapfile failed during initial setup
+  if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
+    RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
+    if [[ -n $RESUME_OFFSET ]]; then
+      echo "Fixing empty resume_offset ($RESUME_OFFSET)"
+      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
+      sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
+      sudo limine-mkinitcpio
+      sudo limine-update
+    fi
+  fi
   echo "Hibernation is already set up"
   exit 0
 fi
@@ -29,7 +42,6 @@ if [[ $1 != "--force" ]]; then
 fi
 
 SWAP_SUBVOLUME="/swap"
-SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
 
 # Create btrfs subvolume for swap
 if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
@@ -68,14 +80,18 @@ sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/
 
 # Add resume= kernel parameters so the initramfs resume hook knows where to find the
 # hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
-RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
 if [[ ! -f $RESUME_DROP_IN ]]; then
   echo "Adding resume kernel parameters"
   sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
   RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
-  RESUME_OFFSET=$(btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
+  RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
-  sudo mkdir -p /etc/limine-entry-tool.d
+  if [[ -n $RESUME_OFFSET ]]; then
-  echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+    sudo mkdir -p /etc/limine-entry-tool.d
+    echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
+  else
+    echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
+  fi
 fi
 
 # Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
@@ -85,6 +101,7 @@ if grep -q "\[s2idle\]" /sys/power/mem_sleep 2>/dev/null; then
     echo "Enabling ACPI RTC alarm for s2idle suspend"
     sudo mkdir -p /etc/limine-entry-tool.d
     echo 'KERNEL_CMDLINE[default]+=" rtc_cmos.use_acpi_alarm=1"' | sudo tee "$LIMINE_DROP_IN" >/dev/null
+    sudo tee -a /etc/default/limine < "$LIMINE_DROP_IN" >/dev/null
   fi
 fi
 

bin/omarchy-hw-dell-xps-oled

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Match Dell XPS systems with LG OLED panel on Intel Panther Lake (Xe3) GPU.
+
+omarchy-hw-match "XPS" \
+  && omarchy-hw-intel-ptl \
+  && test "$(od -An -tx1 -j8 -N2 /sys/class/drm/card*-eDP-*/edid 2>/dev/null | tr -d ' \n')" = "30e4"

bin/omarchy-hw-framework16

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Framework Laptop 16.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Framework" ]] &&
-  grep -q "Laptop 16" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Laptop 16"

bin/omarchy-hw-intel

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Detect whether the computer has an Intel CPU.
+
+[[ $(grep -m1 "vendor_id" /proc/cpuinfo 2>/dev/null | cut -d: -f2 | tr -d ' ') == "GenuineIntel" ]]

bin/omarchy-hw-intel-ptl

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Detect whether the computer has an Intel Panther Lake GPU.
+
+lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'

bin/omarchy-hw-match

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# Match against the computer's DMI product name (case-insensitive).
+# Usage: omarchy-hw-match "XPS"
+
+grep -qi "$1" /sys/class/dmi/id/product_name 2>/dev/null

bin/omarchy-hw-surface

@@ -3,4 +3,4 @@
 # Detect whether the computer is a Microsoft Surface device.
 
 [[ $(cat /sys/class/dmi/id/sys_vendor 2>/dev/null) == "Microsoft Corporation" ]] &&
-  grep -q "Surface" /sys/class/dmi/id/product_name 2>/dev/null
+  omarchy-hw-match "Surface"

bin/omarchy-hw-vulkan

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+# Detect whether Vulkan is available.
+
+[[ -d /usr/share/vulkan/icd.d ]] &&
+  find /usr/share/vulkan/icd.d -maxdepth 1 -name "*.json" -print -quit | grep -q .

bin/omarchy-hyprland-active-window-transparency-toggle

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Toggles transparency for the currently focused window.
+
+hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle

bin/omarchy-hyprland-monitor-focused

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# Print the name of the currently focused Hyprland monitor.
+
+hyprctl monitors -j | jq -r '.[] | select(.focused == true).name'

bin/omarchy-hyprland-monitor-internal-toggle

@@ -0,0 +1,29 @@
+#!/bin/bash
+
+# Toggle the internal laptop display on/off.
+# Useful when connected to an external monitor and you want to close the lid
+# or just use the external display only.
+
+INTERNAL=$(hyprctl monitors all -j | jq -r '.[] | select(.name | startswith("eDP")) | .name')
+
+if [[ -z $INTERNAL ]]; then
+  notify-send -u low "󰍹    No internal display found"
+  exit 1
+fi
+
+DISABLED=$(hyprctl monitors all -j | jq -r --arg m "$INTERNAL" '.[] | select(.name == $m) | .disabled')
+
+if [[ $DISABLED == "true" ]]; then
+  hyprctl keyword monitor "$INTERNAL,preferred,auto,auto"
+  hyprctl dispatch movecursor 0 0
+  notify-send -u low "󰍹    Internal display on"
+else
+  ACTIVE_COUNT=$(hyprctl monitors -j | jq 'length')
+  if [[ $ACTIVE_COUNT -le 1 ]]; then
+    notify-send -u low "󰍹    Can't disable the only active display"
+    exit 1
+  fi
+
+  hyprctl keyword monitor "$INTERNAL,disable"
+  notify-send -u low "󰍹    Internal display off"
+fi

bin/omarchy-hyprland-monitor-scaling-cycle

@@ -18,7 +18,5 @@ case "$CURRENT_INT" in
 *) NEW_SCALE=1 ;;
 esac
 
-hyprctl keyword misc:disable_scale_notification true
 hyprctl keyword monitor "$ACTIVE_MONITOR,${WIDTH}x${HEIGHT}@${REFRESH_RATE},auto,$NEW_SCALE"
-hyprctl keyword misc:disable_scale_notification false
+notify-send -u low "󰍹    Display scaling set to ${NEW_SCALE}x"
-notify-send "󰍹    Display scaling set to ${NEW_SCALE}x"

bin/omarchy-hyprland-window-single-square-aspect-toggle

@@ -6,8 +6,8 @@ CURRENT_VALUE=$(hyprctl getoption "layout:single_window_aspect_ratio" 2>/dev/nul
 # Parse vec2 output: "vec2: [1, 1]" or "vec2: [0, 0]"
 if [[ $CURRENT_VALUE == *"[1, 1]"* ]]; then
   hyprctl keyword layout:single_window_aspect_ratio "0 0"
-  notify-send "    Disable single-window square aspect ratio"
+  notify-send -u low "    Disable single-window square aspect ratio"
 else
   hyprctl keyword layout:single_window_aspect_ratio "1 1"
-  notify-send "    Enable single-window square aspect"
+  notify-send -u low "    Enable single-window square aspect"
 fi

bin/omarchy-hyprland-workspace-layout-toggle

@@ -11,4 +11,4 @@ case "$CURRENT_LAYOUT" in
 esac
 
 hyprctl keyword workspace $ACTIVE_WORKSPACE, layout:$NEW_LAYOUT
-notify-send "󱂬    Workspace layout set to $NEW_LAYOUT"
+notify-send -u low "󱂬    Workspace layout set to $NEW_LAYOUT"

bin/omarchy-install-dev-env

@@ -50,9 +50,9 @@ case "$1" in
 ruby)
   echo -e "Installing Ruby on Rails...\n"
   omarchy-pkg-add libyaml
-  mise use --global ruby@latest
-  mise settings add idiomatic_version_file_enable_tools ruby
   mise settings add ruby.compile false
+  mise settings add idiomatic_version_file_enable_tools ruby
+  mise use --global ruby@latest
   echo "gem: --no-document" >~/.gemrc
   mise x ruby -- gem install rails --no-document
   echo -e "\nYou can now run: rails new myproject"

bin/omarchy-install-nordvpn

@@ -14,4 +14,4 @@ sudo usermod -aG nordvpn "$USER"
 echo -e "\nNordVPN installed! After reboot, run 'nordvpn login' to authenticate."
 
 echo
-gum confirm "Reboot now to make NordVPN usable?" && sudo reboot now
+gum confirm "Reboot now to make NordVPN usable?" && omarchy-system-reboot

bin/omarchy-install-once

@@ -0,0 +1,12 @@
+#!/bin/bash
+
+# Install the ONCE service, enable its background service, and launch the TUI.
+
+echo "Installing ONCE..."
+omarchy-pkg-add once-bin
+
+echo "Enabling ONCE background service..."
+sudo systemctl enable --now once-background.service
+
+echo -e "\nLaunching ONCE..."
+once

bin/omarchy-launch-screensaver

@@ -18,7 +18,7 @@ fi
 # Silently quit Walker on overlay
 walker -q
 
-focused=$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')
+focused=$(omarchy-hyprland-monitor-focused)
 terminal=$(xdg-terminal-exec --print-id)
 
 for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
@@ -46,7 +46,7 @@ for m in $(hyprctl monitors -j | jq -r '.[] | .name'); do
       -e omarchy-cmd-screensaver
     ;;
   *)
-    notify-send "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
+    notify-send -u low "✋  Screensaver only runs in Alacritty, Ghostty, or Kitty"
     ;;
   esac
 done

bin/omarchy-launch-walker

@@ -9,7 +9,7 @@ fi
 
 # Ensure walker service is running
 if ! pgrep -f "walker --gapplication-service" > /dev/null; then
-  setsid uwsm-app -- walker --gapplication-service &
+  setsid uwsm-app -- env GSK_RENDERER=cairo walker --gapplication-service &
 fi
 
 exec walker --width 644 --maxheight 300 --minheight 300 "$@"

bin/omarchy-launch-webapp

@@ -5,7 +5,7 @@
 browser=$(xdg-settings get default-web-browser)
 
 case $browser in
-google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
+google-chrome* | brave* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
 *) browser="chromium.desktop" ;;
 esac
 

bin/omarchy-menu

@@ -20,8 +20,8 @@ back_to() {
 }
 
 toggle_existing_menu() {
-  if pgrep -f "walker.*--dmenu" > /dev/null; then
+  if pgrep -f "walker.*--dmenu" >/dev/null; then
-    walker --close > /dev/null 2>&1
+    walker --close >/dev/null 2>&1
     exit 0
   fi
 }
@@ -54,7 +54,7 @@ present_terminal() {
 }
 
 open_in_editor() {
-  notify-send "Editing config file" "$1"
+  notify-send -u low "Editing config file" "$1"
   omarchy-launch-editor "$1"
 }
 
@@ -168,7 +168,7 @@ show_share_menu() {
 }
 
 show_toggle_menu() {
-  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Display Scaling") in
+  case $(menu "Toggle" "󱄄  Screensaver\n󰔎  Nightlight\n󱫖  Idle Lock\n󰍜  Top Bar\n󱂬  Workspace Layout\n  Window Gaps\n  1-Window Ratio\n󰍹  Monitor Scaling\n󰛧  Laptop Display") in
 
   *Screensaver*) omarchy-toggle-screensaver ;;
   *Nightlight*) omarchy-toggle-nightlight ;;
@@ -178,6 +178,7 @@ show_toggle_menu() {
   *Ratio*) omarchy-hyprland-window-single-square-aspect-toggle ;;
   *Gaps*) omarchy-hyprland-window-gaps-toggle ;;
   *Scaling*) omarchy-hyprland-monitor-scaling-cycle ;;
+  *Laptop*) omarchy-hyprland-monitor-internal-toggle ;;
   *) back_to show_trigger_menu ;;
   esac
 }
@@ -315,10 +316,11 @@ show_install_menu() {
 }
 
 show_install_service_menu() {
-  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰟵  Bitwarden\n  Chromium Account") in
+  case $(menu "Install" "  Dropbox\n  Tailscale\n󱇱  NordVPN [AUR]\n󰏖  ONCE\n󰟵  Bitwarden\n  Chromium Account") in
   *Dropbox*) present_terminal omarchy-install-dropbox ;;
   *Tailscale*) present_terminal omarchy-install-tailscale ;;
   *NordVPN*) present_terminal omarchy-install-nordvpn ;;
+  *ONCE*) present_terminal omarchy-install-once ;;
   *Bitwarden*) install_and_launch "Bitwarden" "bitwarden bitwarden-cli" "bitwarden" ;;
   *Chromium*) present_terminal omarchy-install-chromium-google-account ;;
   *) show_install_menu ;;
@@ -353,13 +355,8 @@ show_install_ai_menu() {
       echo ollama
   )
 
-  case $(menu "Install" "  Dictation\n󱚤  Claude Code\n󱚤  Codex\n󱚤  Gemini CLI\n󱚤  Copilot CLI\n󱚤  Cursor CLI\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
+  case $(menu "Install" "  Dictation\n󱚤  LM Studio\n󱚤  Ollama\n󱚤  Crush") in
   *Dictation*) present_terminal omarchy-voxtype-install ;;
-  *Claude*) install "Claude Code" "claude-code" ;;
-  *Codex*) install "Codex" "openai-codex" ;;
-  *Gemini*) install "Gemini CLI" "gemini-cli" ;;
-  *Copilot*) install "Copilot CLI" "github-copilot-cli" ;;
-  *Cursor*) install "Cursor CLI" "cursor-cli" ;;
   *Studio*) install "LM Studio" "lmstudio-bin" ;;
   *Ollama*) install "Ollama" $ollama_pkg ;;
   *Crush*) install "Crush" "crush-bin" ;;
@@ -558,10 +555,11 @@ show_update_config_menu() {
 }
 
 show_update_hardware_menu() {
-  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth") in
+  case $(menu "Restart" "  Audio\n󱚾  Wi-Fi\n󰂯  Bluetooth\n󰟸  Trackpad") in
   *Audio*) present_terminal omarchy-restart-pipewire ;;
   *Wi-Fi*) present_terminal omarchy-restart-wifi ;;
   *Bluetooth*) present_terminal omarchy-restart-bluetooth ;;
+  *Trackpad*) present_terminal omarchy-restart-trackpad ;;
   *) show_update_menu ;;
   esac
 }

bin/omarchy-menu-keybindings

@@ -46,8 +46,12 @@ parse_keycodes() {
   while IFS= read -r line; do
     if [[ $line =~ code:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
-      symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
+      if [[ $code == "201" ]]; then
-      echo "${line/code:${code}/$symbol}"
+        echo "${line/SUPER SHIFT,code:201/,COPILOT KEY}"
+      else
+        symbol=$(lookup_keycode_cached "$code" "$XKB_KEYMAP_CACHE")
+        echo "${line/code:${code}/$symbol}"
+      fi
     elif [[ $line =~ mouse:([0-9]+) ]]; then
       code="${BASH_REMATCH[1]}"
 

bin/omarchy-npx-install

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+# Install an npx wrapper for a given npm package.
+# Usage: omarchy-npx-install <package> [command-name]
+#
+# If command-name is omitted, it defaults to the package name.
+# Example: omarchy-npx-install opencode-ai opencode
+
+if [[ -z $1 ]]; then
+  echo "Usage: omarchy-npx-install <package> [command-name]"
+  exit 1
+fi
+
+package=$1
+command=${2:-$1}
+
+mkdir -p "$HOME/.local/bin"
+
+cat > "$HOME/.local/bin/$command" <<EOF
+#!/bin/bash
+exec mise exec node@latest -- npx --yes $package "\$@"
+EOF
+
+chmod +x "$HOME/.local/bin/$command"

bin/omarchy-pkg-aur-install

@@ -20,7 +20,8 @@ pkg_names=$(yay -Slqa | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
   # Add aur/ prefix to each package name and convert to space-separated for yay
-  sudo -v
+  source omarchy-sudo-keepalive
+
   echo "$pkg_names" | sed 's/^/aur\//' | tr '\n' ' ' | xargs yay -S --noconfirm
   sudo updatedb
   omarchy-show-done

bin/omarchy-pkg-install

@@ -17,7 +17,9 @@ fzf_args=(
 pkg_names=$(pacman -Slq | fzf "${fzf_args[@]}")
 
 if [[ -n $pkg_names ]]; then
-  # Convert newline-separated selections to space-separated for yay
+  source omarchy-sudo-keepalive
+
+  # Convert newline-separated selections to space-separated for pacman
   echo "$pkg_names" | tr '\n' ' ' | xargs sudo pacman -S --noconfirm
   omarchy-show-done
 fi

bin/omarchy-powerprofiles-init

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+# Set the correct power profile on boot based on current AC/battery state.
+# The udev rules only fire on state *changes*, so without this, booting
+# on AC leaves you in the default balanced mode.
+
+if omarchy-battery-present && ! omarchy-ac-present; then
+  omarchy-powerprofiles-set battery
+else
+  omarchy-powerprofiles-set ac
+fi

bin/omarchy-powerprofiles-set

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Set the power profile to the requested level, falling back to balanced
+# if the requested profile isn't available on this machine.
+#
+# Usage: omarchy-powerprofiles-set <ac|battery>
+
+mapfile -t profiles < <(powerprofilesctl list | awk '/^\s*[* ]\s*[a-zA-Z0-9\-]+:$/ { gsub(/^[*[:space:]]+|:$/,""); print }')
+
+case "$1" in
+  ac)
+    # Prefer performance, fall back to balanced
+    if [[ " ${profiles[*]} " == *" performance "* ]]; then
+      powerprofilesctl set performance
+    else
+      powerprofilesctl set balanced
+    fi
+    ;;
+  battery)
+    powerprofilesctl set balanced
+    ;;
+esac

bin/omarchy-reinstall-git

@@ -3,6 +3,6 @@ set -e
 
 # Reinstall the Omarchy configuration directory from the git source.
 
-git clone "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
+git clone --depth=1 "https://github.com/basecamp/omarchy.git" ~/.local/share/omarchy-new >/dev/null
 mv $OMARCHY_PATH ~/.local/share/omarchy-old
 mv ~/.local/share/omarchy-new $OMARCHY_PATH

bin/omarchy-remove-preinstalls

@@ -13,6 +13,10 @@ if gum confirm "Are you sure you want to remove all preinstalled web apps, TUI w
   cp "$OMARCHY_PATH/default/hypr/plain-bindings.conf" ~/.config/hypr/bindings.conf
   hyprctl reload
 
+  # Remove npx stubs
+  rm -f ~/.local/bin/codex ~/.local/bin/gemini ~/.local/bin/copilot \
+       ~/.local/bin/opencode ~/.local/bin/playwright-cli ~/.local/bin/pi
+
   omarchy-pkg-drop \
     aether \
     typora \

bin/omarchy-restart-makima

@@ -1,5 +0,0 @@
-#!/bin/bash
-
-# Restart makima - key remapping service for remapping Copilot key to Omarchy Menu
-
-sudo systemctl restart makima

bin/omarchy-restart-trackpad

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+# Reset the trackpad by unbinding and rebinding its driver.
+# Covers both driver paths:
+#   - i2c_hid_acpi (DesignWare I2C, e.g. XPS 14/16 Synaptics trackpad)
+#   - intel_quicki2c (THC Touch Host Controller)
+
+# Try i2c_hid_acpi path (DesignWare I2C trackpads)
+for dev in /sys/bus/i2c/drivers/i2c_hid_acpi/i2c-*; do
+  [ -e "$dev" ] || continue
+  I2C_DEVICE=$(basename "$dev")
+  echo "Resetting $I2C_DEVICE via i2c_hid_acpi unbind/rebind..."
+  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/unbind > /dev/null
+  sleep 1
+  echo "$I2C_DEVICE" | sudo tee /sys/bus/i2c/drivers/i2c_hid_acpi/bind > /dev/null
+  echo "Done"
+done
+
+# Also try THC path
+if lsmod | grep -q intel_quicki2c; then
+  echo "Reloading intel_quicki2c..."
+  sudo modprobe -r intel_quicki2c && sudo modprobe intel_quicki2c
+fi

bin/omarchy-sudo-keepalive

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# Prompt for sudo once and keep the credential alive in the background.
+# Source this script so the trap applies to the calling shell:
+#   source omarchy-sudo-keepalive
+
+sudo -v
+while true; do sudo -n true; sleep 60; done 2>/dev/null &
+SUDO_KEEPALIVE_PID=$!
+trap "kill $SUDO_KEEPALIVE_PID 2>/dev/null" EXIT

bin/omarchy-sudo-passwordless-toggle

@@ -0,0 +1,43 @@
+#!/bin/bash
+
+# Toggle passwordless sudo for the current user.
+# First run: enables passwordless sudo for 15 minutes (after confirmation).
+# Second run: disables it early.
+
+NOPASSWD_FILE="/etc/sudoers.d/99-omarchy-nopasswd-${USER}"
+TIMER_NAME="omarchy-nopasswd-expire-${USER}"
+
+# Safety: if the file exists but the timer doesn't (e.g. after reboot), clean up
+if sudo test -f "$NOPASSWD_FILE" && ! systemctl is-active "${TIMER_NAME}.timer" &>/dev/null; then
+  sudo rm "$NOPASSWD_FILE"
+fi
+
+# Check for the file directly — sudo -n can stay cached or be granted by other rules
+if sudo test -f "$NOPASSWD_FILE"; then
+  sudo rm "$NOPASSWD_FILE"
+  sudo systemctl stop "${TIMER_NAME}.timer" 2>/dev/null
+  echo "Passwordless sudo has been DISABLED. Sudo will require a password again."
+else
+  echo ""
+  echo "⚠️  WARNING: This will allow ANY process running as your user to"
+  echo "execute ANY command as root WITHOUT a password for 15 minutes."
+  echo ""
+  echo "This is useful for AI agents that need to run sudo commands,"
+  echo "but it significantly weakens the security of your system."
+  echo "Anyone or anything with access to your user account gets full root."
+  echo ""
+  echo "Passwordless sudo will automatically disable after 15 minutes."
+  echo "Run this command again to disable it early."
+  echo ""
+
+  if gum confirm "Enable passwordless sudo for 15 minutes? This is a significant security risk!"; then
+    echo "${USER} ALL=(ALL) NOPASSWD: ALL" | sudo tee "$NOPASSWD_FILE" > /dev/null
+    sudo chmod 440 "$NOPASSWD_FILE"
+    sudo systemd-run --on-active=15m --timer-property=AccuracySec=1s --unit="$TIMER_NAME" \
+      rm "$NOPASSWD_FILE"
+    echo "Passwordless sudo has been ENABLED. It will automatically disable in 15 minutes."
+    echo "Note: if you restart before then, run omarchy-sudo-passwordless-toggle again to disable it."
+  else
+    echo "Aborted. No changes made."
+  fi
+fi

bin/omarchy-swayosd-brightness

@@ -9,7 +9,7 @@ progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
 swayosd-client \
-  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
   --custom-icon display-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-swayosd-kbd-brightness

@@ -9,7 +9,7 @@ progress="$(awk -v p="$percent" 'BEGIN{printf "%.2f", p/100}')"
 [[ $progress == "0.00" ]] && progress="0.01"
 
 swayosd-client \
-  --monitor "$(hyprctl monitors -j | jq -r '.[]|select(.focused==true).name')" \
+  --monitor "$(omarchy-hyprland-monitor-focused)" \
   --custom-icon keyboard-brightness \
   --custom-progress "$progress" \
   --custom-progress-text "${percent}%"

bin/omarchy-theme-set-browser

@@ -13,12 +13,12 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
   fi
 
   if omarchy-cmd-present chromium; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
-    chromium --refresh-platform-policy --no-startup-window >/dev/null
+    chromium --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 
   if omarchy-cmd-present brave; then
-    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
+    echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
-    brave --refresh-platform-policy --no-startup-window >/dev/null
+    brave --refresh-platform-policy --no-startup-window &>/dev/null
   fi
 fi

bin/omarchy-theme-set-vscode

@@ -35,5 +35,6 @@ set_theme() {
 }
 
 set_theme "code" "$HOME/.config/Code/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-theme-changes"
+set_theme "code-insiders" "$HOME/.config/Code - Insiders/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-vscode-insiders-theme-changes"
 set_theme "codium" "$HOME/.config/VSCodium/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-codium-theme-changes"
 set_theme "cursor" "$HOME/.config/Cursor/User/settings.json" "$HOME/.local/state/omarchy/toggles/skip-cursor-theme-changes"

bin/omarchy-toggle-idle

@@ -2,10 +2,10 @@
 
 if pgrep -x hypridle >/dev/null; then
   pkill -x hypridle
-  notify-send "󱫖    Stop locking computer when idle"
+  notify-send -u low "󱫖    Stop locking computer when idle"
 else
   uwsm-app -- hypridle >/dev/null 2>&1 &
-  notify-send "󱫖    Now locking computer when idle"
+  notify-send -u low "󱫖    Now locking computer when idle"
 fi
 
 pkill -RTMIN+9 waybar

bin/omarchy-toggle-nightlight

@@ -21,10 +21,10 @@ restart_nightlighted_waybar() {
 
 if [[ $CURRENT_TEMP == $OFF_TEMP ]]; then
   hyprctl hyprsunset temperature $ON_TEMP
-  notify-send "  Nightlight screen temperature"
+  notify-send -u low "  Nightlight screen temperature"
   restart_nightlighted_waybar
 else
   hyprctl hyprsunset temperature $OFF_TEMP
-  notify-send "   Daylight screen temperature"
+  notify-send -u low "   Daylight screen temperature"
   restart_nightlighted_waybar
 fi

bin/omarchy-toggle-notification-silencing

@@ -3,9 +3,9 @@
 makoctl mode -t do-not-disturb
 
 if makoctl mode | grep -q 'do-not-disturb'; then
-  notify-send "󰂛    Silenced notifications"
+  notify-send -u low "󰂛    Silenced notifications"
 else
-  notify-send "󰂚    Enabled notifications"
+  notify-send -u low "󰂚    Enabled notifications"
 fi
 
 pkill -RTMIN+10 waybar

bin/omarchy-toggle-screensaver

@@ -4,9 +4,9 @@ STATE_FILE=~/.local/state/omarchy/toggles/screensaver-off
 
 if [[ -f $STATE_FILE ]]; then
   rm -f $STATE_FILE
-  notify-send "󱄄   Screensaver enabled"
+  notify-send -u low "󱄄   Screensaver enabled"
 else
   mkdir -p "$(dirname $STATE_FILE)"
   touch $STATE_FILE
-  notify-send "󱄄   Screensaver disabled"
+  notify-send -u low "󱄄   Screensaver disabled"
 fi

bin/omarchy-toggle-suspend

@@ -4,9 +4,9 @@ STATE_FILE=~/.local/state/omarchy/toggles/suspend-off
 
 if [[ -f $STATE_FILE ]]; then
   rm -f $STATE_FILE
-  notify-send "󰒲   Suspend now available in system menu"
+  notify-send -u low "󰒲   Suspend now available in system menu"
 else
   mkdir -p "$(dirname $STATE_FILE)"
   touch $STATE_FILE
-  notify-send "󰒲   Suspend removed from system menu"
+  notify-send -u low "󰒲   Suspend removed from system menu"
 fi

bin/omarchy-update

@@ -2,6 +2,13 @@
 
 set -e
 
+# Run the update inside a PTY so pacman/yay keep showing download progress
+# while still logging the full session for later analysis.
+if [[ -z $OMARCHY_UPDATE_LOGGED ]]; then
+  script_command=$(printf '%q ' "$0" "$@")
+  exec env OMARCHY_UPDATE_LOGGED=1 script -qefc "$script_command" "/tmp/omarchy-update.log"
+fi
+
 trap 'echo ""; echo -e "\033[0;31mSomething went wrong during the update!\n\nPlease review the output above carefully, correct the error, and retry the update.\n\nIf you need assistance, get help from the community at https://omarchy.org/discord\033[0m"' ERR
 
 if [[ $1 == "-y" ]] || omarchy-update-confirm; then

bin/omarchy-update-firmware

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# Update system firmware using fwupd. Ensures the fwupd EFI binary is installed
+# in the ESP so UEFI capsule updates work with the Limine bootloader.
+
 set -e
 echo -e "\e[32mUpdate Firmware\e[0m"
 
@@ -7,5 +10,9 @@ if omarchy-cmd-missing fwupdmgr; then
   omarchy-pkg-add fwupd
 fi
 
+if [[ -d /sys/firmware/efi ]] && [[ -f /usr/lib/fwupd/efi/fwupdx64.efi ]]; then
+  sudo install -D /usr/lib/fwupd/efi/fwupdx64.efi /boot/EFI/arch/fwupdx64.efi
+fi
+
 fwupdmgr refresh --force
 sudo fwupdmgr update

bin/omarchy-update-git

@@ -6,5 +6,10 @@ echo -e "\e[32mUpdate Omarchy\e[0m"
 
 omarchy-update-time
 
+# Suppress Hyprland config errors while git updates default config files mid-pull
+hyprctl keyword debug:suppress_errors true &>/dev/null || true
+
 git -C $OMARCHY_PATH pull --autostash
 git -C $OMARCHY_PATH --no-pager diff --check || git -C $OMARCHY_PATH reset --merge
+
+hyprctl reload &>/dev/null || true

bin/omarchy-update-perform

@@ -5,10 +5,6 @@ set -e
 # Ensure screensaver/sleep doesn't set in during updates
 hyprctl dispatch tagwindow +noidle &>/dev/null || true
 
-# Capture update logs (CLICOLOR_FORCE keeps gum styled when stdout is piped through tee)
-export CLICOLOR_FORCE=1
-exec > >(tee "/tmp/omarchy-update.log") 2>&1
-
 # Perform all update steps
 omarchy-update-keyring
 omarchy-update-available-reset

bin/omarchy-voxtype-install

@@ -11,6 +11,9 @@ if gum confirm "Install Voxtype + AI model (~150MB) to enable dictation?"; then
   cp $OMARCHY_PATH/default/voxtype/config.toml ~/.config/voxtype/
 
   voxtype setup --download --no-post-install
+  if omarchy-hw-vulkan; then
+    voxtype setup gpu --enable || true
+  fi
   voxtype setup systemd
 
   omarchy-restart-waybar

config/alacritty/alacritty.toml

@@ -20,5 +20,6 @@ decorations = "None"
 [keyboard]
 bindings = [
 { key = "Insert", mods = "Shift", action = "Paste" },
-{ key = "Insert", mods = "Control", action = "Copy" }
+{ key = "Insert", mods = "Control", action = "Copy" },
+{ key = "Return", mods = "Shift", chars = "\u001B\r" }
 ]

config/autostart/org.fcitx.Fcitx5.desktop

@@ -0,0 +1,2 @@
+[Desktop Entry]
+Hidden=true

config/btop/btop.conf

@@ -1,18 +1,18 @@
-#? Config file for btop
+#? Config file for btop v.1.4.6
 
 #* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
 #* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
 color_theme = "current"
 
 #* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = True
+theme_background = true
 
 #* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = True
+truecolor = true
 
 #* Set to true to force tty mode regardless if a real tty has been detected or not.
 #* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = False
+force_tty = false
 
 #* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
 #* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
@@ -22,10 +22,13 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul
 
 #* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
 #* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = True
+vim_keys = true
 
 #* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = True
+rounded_corners = true
+
+#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
+terminal_sync = true
 
 #* Default symbols to use for graph creation, "braille", "block" or "tty".
 #* "braille" offers the highest resolution but might not be included in all fonts.
@@ -60,37 +63,40 @@ update_ms = 2000
 proc_sorting = "cpu lazy"
 
 #* Reverse sorting order, True or False.
-proc_reversed = False
+proc_reversed = false
 
 #* Show processes as a tree.
-proc_tree = False
+proc_tree = false
 
 #* Use the cpu graph colors in the process list.
-proc_colors = True
+proc_colors = true
 
 #* Use a darkening gradient in the process list.
-proc_gradient = True
+proc_gradient = true
 
 #* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = False
+proc_per_core = false
 
 #* Show process memory as bytes instead of percent.
-proc_mem_bytes = True
+proc_mem_bytes = true
 
 #* Show cpu graph for each process.
-proc_cpu_graphs = True
+proc_cpu_graphs = true
 
 #* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = False
+proc_info_smaps = false
 
 #* Show proc box on left side of screen instead of right.
-proc_left = False
+proc_left = false
 
 #* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = False
+proc_filter_kernel = false
 
 #* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = False
+proc_aggregate = false
+
+#* Should cpu and memory usage display be preserved for dead processes when paused.
+keep_dead_proc_usage = false
 
 #* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
 #* Select from a list of detected attributes from the options menu.
@@ -104,25 +110,28 @@ cpu_graph_lower = "Auto"
 show_gpu_info = "Auto"
 
 #* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = True
+cpu_invert_lower = true
 
 #* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = False
+cpu_single_graph = false
 
 #* Show cpu box at bottom of screen instead of top.
-cpu_bottom = False
+cpu_bottom = false
 
 #* Shows the system uptime in the CPU box.
-show_uptime = True
+show_uptime = true
+
+#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
+show_cpu_watts = true
 
 #* Show cpu temperature.
-check_temp = True
+check_temp = true
 
 #* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
 cpu_sensor = "Auto"
 
 #* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = True
+show_coretemp = true
 
 #* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
 #* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
@@ -134,63 +143,66 @@ cpu_core_map = ""
 temp_scale = "celsius"
 
 #* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = False
+base_10_sizes = false
 
 #* Show CPU frequency.
-show_cpu_freq = True
+show_cpu_freq = true
+
+#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
+freq_mode = "first"
 
 #* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
 #* Special formatting: /host = hostname | /user = username | /uptime = system uptime
 clock_format = "%X"
 
 #* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = True
+background_update = true
 
 #* Custom cpu model name, empty string to disable.
 custom_cpu_name = ""
 
 #* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
-#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
+#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
 disks_filter = ""
 
 #* Show graphs instead of meters for memory values.
-mem_graphs = True
+mem_graphs = true
 
 #* Show mem box below net box instead of above.
-mem_below_net = False
+mem_below_net = false
 
 #* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = True
+zfs_arc_cached = true
 
 #* If swap memory should be shown in memory box.
-show_swap = True
+show_swap = true
 
 #* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = True
+swap_disk = true
 
 #* If mem box should be split to also show disks info.
-show_disks = True
+show_disks = true
 
 #* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = True
+only_physical = true
 
 #* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = True
+use_fstab = true
 
 #* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = False
+zfs_hide_datasets = false
 
 #* Set to true to show available disk space for privileged users.
-disk_free_priv = False
+disk_free_priv = false
 
 #* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = True
+show_io_stat = true
 
 #* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
+io_mode = false
 
 #* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = False
+io_graph_combined = false
 
 #* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
 #* Example: "/mnt/media:100 /:20 /boot:1".
@@ -202,29 +214,44 @@ net_download = 100
 net_upload = 100
 
 #* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = True
+net_auto = true
 
 #* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = True
+net_sync = true
 
 #* Starts with the Network Interface specified here.
 net_iface = ""
 
+#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
+base_10_bitrate = "Auto"
+
 #* Show battery stats in top right if battery is present.
-show_battery = True
+show_battery = true
 
 #* Which battery to use if multiple are present. "Auto" for auto detection.
 selected_battery = "Auto"
 
-#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
+#* Show power stats of battery next to charge indicator.
+show_battery_watts = true
+
+#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
 #* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
 log_level = "WARNING"
 
+#* Automatically save current settings to config file on exit.
+save_config_on_exit = true
+
 #* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
-nvml_measure_pcie_speeds = True
+nvml_measure_pcie_speeds = true
+
+#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
+rsmi_measure_pcie_speeds = true
 
 #* Horizontally mirror the GPU graph.
-gpu_mirror_graph = True
+gpu_mirror_graph = true
+
+#* Set which GPU vendors to show. Available values are "nvidia amd intel"
+shown_gpus = "nvidia amd intel"
 
 #* Custom gpu0 model name, empty string to disable.
 custom_gpu_name0 = ""
@@ -243,4 +270,3 @@ custom_gpu_name4 = ""
 
 #* Custom gpu5 model name, empty string to disable.
 custom_gpu_name5 = ""
-

config/hypr/bindings.conf

@@ -32,3 +32,8 @@ bindd = SUPER SHIFT ALT, X, X Post, exec, omarchy-launch-webapp "https://x.com/c
 # Overwrite existing bindings, like putting Omarchy Menu on Super + Space
 # unbind = SUPER, SPACE
 # bindd = SUPER, SPACE, Omarchy menu, exec, omarchy-menu
+
+# Logitech MX Keys
+# bind = SUPER SHIFT, S, exec, omarchy-cmd-screenshot          # Print Screen Button
+# bind = SUPER, H, exec, voxtype record toggle                 # Dictation Button
+# bind = SUPER, PERIOD, exec, omarchy-launch-walker -m symbols # Emoji Button

config/hypr/input.conf

@@ -11,7 +11,7 @@ input {
 
   # Change speed of keyboard repeat
   repeat_rate = 40
-  repeat_delay = 600
+  repeat_delay = 250
 
   # Start with numlock on by default
   numlock_by_default = true

config/hypr/monitors.conf

@@ -4,7 +4,7 @@
 
 # Optimized for retina-class 2x displays, like 13" 2.8K, 27" 5K, 32" 6K.
 env = GDK_SCALE,2
-monitor=,preferred,auto,auto
+monitor=,preferred,auto,auto,vrr,1
 
 # Good compromise for 27" or 32" 4K monitors (but fractional!)
 # env = GDK_SCALE,1.75

config/omarchy/hooks/battery-low.sample

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# This hook is called with the current battery percentage when the low battery
+# notification is sent. To put it into use, remove .sample from the name.
+
+SOUND_FILE="/usr/share/sounds/freedesktop/stereo/dialog-warning.oga"
+
+if omarchy-cmd-present mpv && [[ -f $SOUND_FILE ]]; then
+  mpv --no-video "$SOUND_FILE" >/dev/null 2>&1
+fi

config/omarchy/hooks/font-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send "New font" "Your new font is $1"
+# notify-send -u low "New font" "Your new font is $1"

config/omarchy/hooks/post-update.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show notification after the system has been updated.
-# notify-send "Update Performed" "Your system is now up to date"
+# notify-send -u low "Update Performed" "Your system is now up to date"

config/omarchy/hooks/theme-set.sample

@@ -4,4 +4,4 @@
 # To put it into use, remove .sample from the name.
 
 # Example: Show the name of the theme that was just set.
-# notify-send "New theme" "Your new theme is $1"
+# notify-send -u low "New theme" "Your new theme is $1"

config/tmux/tmux.conf

@@ -4,7 +4,7 @@ set -g prefix2 C-b
 bind C-Space send-prefix
 
 # Reload config
-bind q source-file ~/.config/tmux/tmux.conf
+bind q source-file ~/.config/tmux/tmux.conf \; display "Configuration reloaded"
 
 # Vi mode for copy
 setw -g mode-keys vi
@@ -83,7 +83,7 @@ set -gw automatic-rename-format '#{b:pane_current_path}'
 # Theme
 set -g status-style "bg=default,fg=default"
 set -g status-left "#[fg=black,bg=blue,bold] #S #[bg=default] "
-set -g status-right "#[fg=blue]#{?client_prefix,PREFIX ,}#{?window_zoomed_flag,ZOOM ,}#[fg=brightblack]#h "
+set -g status-right "#[fg=blue]#{?pane_in_mode,COPY ,}#{?client_prefix,PREFIX ,}#{?window_zoomed_flag,ZOOM ,}#[fg=brightblack]#h "
 set -g window-status-format "#[fg=brightblack] #I:#W "
 set -g window-status-current-format "#[fg=blue,bold] #I:#W "
 set -g pane-border-style "fg=brightblack"

config/uwsm/env

@@ -2,7 +2,7 @@
 
 # Ensure Omarchy bins are in the path
 export OMARCHY_PATH=$HOME/.local/share/omarchy
-export PATH=$OMARCHY_PATH/bin:$PATH
+export PATH=$OMARCHY_PATH/bin:$PATH:$HOME/.local/bin
 
 # Set default terminal and editor
 source ~/.config/uwsm/default

config/waybar/config.jsonc

@@ -72,8 +72,8 @@
     "format-wifi": "{icon}",
     "format-ethernet": "󰀂",
     "format-disconnected": "󰤮",
-    "tooltip-format-wifi": "{essid} ({frequency} GHz)\n⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
+    "tooltip-format-wifi": "{essid} ({frequency} GHz)",
-    "tooltip-format-ethernet": "⇣{bandwidthDownBytes}  ⇡{bandwidthUpBytes}",
+    "tooltip-format-ethernet": "Connected",
     "tooltip-format-disconnected": "Disconnected",
     "interval": 3,
     "spacing": 1,

default/bash/aliases

@@ -6,8 +6,13 @@ if command -v eza &> /dev/null; then
   alias lta='lt -a'
 fi
 
-alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+if [[ "$TERM" == "xterm-kitty" ]]; then
+  alias ff="fzf --preview 'case \$(file --mime-type -b {}) in image/*) kitty icat --clear --transfer-mode=memory --stdin=no --place=\${FZF_PREVIEW_COLUMNS}x\${FZF_PREVIEW_LINES}@0x0 {} ;; *) bat --style=numbers --color=always {} ;; esac'"
+else
+  alias ff="fzf --preview 'bat --style=numbers --color=always {}'"
+fi
 alias eff='$EDITOR "$(ff)"'
+sff() { if [ $# -eq 0 ]; then echo "Usage: sff <destination> (e.g. sff host:/tmp/)"; return 1; fi; local file; file=$(find . -type f -printf '%T@\t%p\n' | sort -rn | cut -f2- | ff) && [ -n "$file" ] && scp "$file" "$1"; }
 
 if command -v zoxide &> /dev/null; then
   alias cd="zd"

default/bash/fns/transcoding

@@ -13,23 +13,31 @@ img2jpg() {
   img="$1"
   shift
 
-  magick "$img" "$@" -quality 95 -strip "${img%.*}-converted.jpg"
+  magick "$img" "$@" -quality 85 -strip "${img%.*}-converted.jpg"
 }
 
-# Transcode any image to a small JPG (max 1080px wide) that's great for sharing online
+# Transcode any image to a small JPG (max 1080px wide)
 img2jpg-small() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 1080x\> -quality 95 -strip "${img%.*}-small.jpg"
+  magick "$img" "$@" -resize 1080x\> -quality 85 -strip "${img%.*}-small.jpg"
 }
 
-# Transcode any image to a medium JPG (max 1800px wide) that's great for sharing online
+# Transcode any image to a 4K JPG (max 2160px wide)
 img2jpg-medium() {
   img="$1"
   shift
 
-  magick "$img" "$@" -resize 1800x\> -quality 95 -strip "${img%.*}-medium.jpg"
+  magick "$img" "$@" -resize 2160x\> -quality 85 -strip "${img%.*}-medium.jpg"
+}
+
+# Transcode any image to a 6K JPG (max 3160px wide)
+img2jpg-large() {
+  img="$1"
+  shift
+
+  magick "$img" "$@" -resize 3160x\> -quality 85 -strip "${img%.*}-large.jpg"
 }
 
 # Transcode any image to compressed-but-lossless PNG

default/bash/fns/worktrees

@@ -7,11 +7,11 @@ ga() {
 
   local branch="$1"
   local base="$(basename "$PWD")"
-  local path="../${base}--${branch}"
+  local wt_path="../${base}--${branch}"
 
-  git worktree add -b "$branch" "$path"
+  git worktree add -b "$branch" "$wt_path"
-  mise trust "$path"
+  mise trust "$wt_path"
-  cd "$path"
+  cd "$wt_path"
 }
 
 # Remove worktree and branch from within active worktree directory.

default/bash/init

@@ -2,7 +2,7 @@ if command -v mise &> /dev/null; then
   eval "$(mise activate bash)"
 fi
 
-if command -v starship &> /dev/null; then
+if [[ $- == *i* ]] && [[ ${TERM:-} != "dumb" ]] && command -v starship &> /dev/null; then
   eval "$(starship init bash)"
 fi
 

default/hypr/apps.conf

@@ -3,13 +3,13 @@ source = ~/.local/share/omarchy/default/hypr/apps/1password.conf
 source = ~/.local/share/omarchy/default/hypr/apps/bitwarden.conf
 source = ~/.local/share/omarchy/default/hypr/apps/browser.conf
 source = ~/.local/share/omarchy/default/hypr/apps/hyprshot.conf
-source = ~/.local/share/omarchy/default/hypr/apps/jetbrains.conf
 source = ~/.local/share/omarchy/default/hypr/apps/localsend.conf
 source = ~/.local/share/omarchy/default/hypr/apps/pip.conf
 source = ~/.local/share/omarchy/default/hypr/apps/qemu.conf
 source = ~/.local/share/omarchy/default/hypr/apps/retroarch.conf
 source = ~/.local/share/omarchy/default/hypr/apps/steam.conf
 source = ~/.local/share/omarchy/default/hypr/apps/geforce.conf
+source = ~/.local/share/omarchy/default/hypr/apps/moonlight.conf
 source = ~/.local/share/omarchy/default/hypr/apps/system.conf
 source = ~/.local/share/omarchy/default/hypr/apps/telegram.conf
 source = ~/.local/share/omarchy/default/hypr/apps/terminals.conf

default/hypr/apps/jetbrains.conf

@@ -1,41 +0,0 @@
-# Fix splash screen showing in weird places and prevent annoying focus takeovers
-windowrule {
-    name = jetbrains-splash
-    match:class = ^(jetbrains-.*)$
-    match:title = ^(splash)$
-    match:float = 1
-    tag = +jetbrains-splash
-    center = on
-    no_focus = on
-    border_size = 0
-}
-
-# Center popups/find windows
-windowrule {
-    name = jetbrains-popup
-    match:class = ^(jetbrains-.*)
-    match:title = ^(| )$
-    match:float = 1
-    tag = +jetbrains
-    center = on
-    # Enabling this makes it possible to provide input in popup dialogs (search window, new file, etc.)
-    stay_focused = on
-    border_size = 0
-    min_size = (monitor_w*0.5) (monitor_h*0.5)
-  }
-
-# Disable window flicker when autocomplete or tooltips appear
-windowrule {
-    name = jetbrains-tooltip
-    match:class = ^(jetbrains-.*)$
-    match:title = ^(win.*)$
-    match:float = 1
-    no_initial_focus = on
-}
-
-# Disable mouse focus
-windowrule {
-    name = jetbrains-focus
-    no_follow_mouse = on
-    match:class = ^(jetbrains-.*)$
-}

default/hypr/apps/moonlight.conf

@@ -0,0 +1,6 @@
+windowrule {
+  name = moonlight
+  match:class = com.moonlight_stream.Moonlight
+  fullscreen = 1
+  idle_inhibit = fullscreen
+}

default/hypr/autostart.conf

@@ -6,6 +6,7 @@ exec-once = uwsm-app -- swaybg -i ~/.config/omarchy/current/background -m fill
 exec-once = uwsm-app -- swayosd-server
 exec-once = /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
 exec-once = omarchy-cmd-first-run
+exec-once = omarchy-powerprofiles-init
 
 # Slow app launch fix -- set systemd vars
 exec-once = systemctl --user import-environment $(env | cut -d'=' -f 1)

default/hypr/bindings/media.conf

@@ -1,11 +1,11 @@
 # Only display the OSD on the currently focused monitor
-$osdclient = swayosd-client --monitor "$(hyprctl monitors -j | jq -r '.[] | select(.focused == true).name')"
+$osdclient = swayosd-client --monitor "$(omarchy-hyprland-monitor-focused)"
 
 # Laptop multimedia keys for volume and LCD brightness (with OSD)
 bindeld = ,XF86AudioRaiseVolume, Volume up, exec, $osdclient --output-volume raise
 bindeld = ,XF86AudioLowerVolume, Volume down, exec, $osdclient --output-volume lower
 bindeld = ,XF86AudioMute, Mute, exec, $osdclient --output-volume mute-toggle
-bindeld = ,XF86AudioMicMute, Mute microphone, exec, $osdclient --input-volume mute-toggle
+bindeld = ,XF86AudioMicMute, Mute microphone, exec, omarchy-cmd-mic-mute
 bindeld = ,XF86MonBrightnessUp, Brightness up, exec, omarchy-brightness-display +5%
 bindeld = ,XF86MonBrightnessDown, Brightness down, exec, omarchy-brightness-display 5%-
 bindeld = ,XF86KbdBrightnessUp, Keyboard brightness up, exec, omarchy-brightness-keyboard up

default/hypr/bindings/utilities.conf

@@ -4,6 +4,7 @@ bindd = SUPER CTRL, E, Emoji picker, exec, omarchy-launch-walker -m symbols
 bindd = SUPER CTRL, C, Capture menu, exec, omarchy-menu capture
 bindd = SUPER CTRL, O, Toggle menu, exec, omarchy-menu toggle
 bindd = SUPER ALT, SPACE, Omarchy menu, exec, omarchy-menu
+bindd = SUPER SHIFT, code:201, Omarchy menu, exec, omarchy-menu
 bindd = SUPER, ESCAPE, System menu, exec, omarchy-menu system
 bindld = , XF86PowerOff, Power menu, exec, omarchy-menu system
 bindd = SUPER, K, Show key bindings, exec, omarchy-menu-keybindings
@@ -13,7 +14,7 @@ bindd = , XF86Calculator, Calculator, exec, gnome-calculator
 bindd = SUPER SHIFT, SPACE, Toggle top bar, exec, omarchy-toggle-waybar
 bindd = SUPER CTRL, SPACE, Theme background menu, exec, omarchy-menu background
 bindd = SUPER SHIFT CTRL, SPACE, Theme menu, exec, omarchy-menu theme
-bindd = SUPER, BACKSPACE, Toggle window transparency, exec, hyprctl dispatch setprop "address:$(hyprctl activewindow -j | jq -r '.address')" opaque toggle
+bindd = SUPER, BACKSPACE, Toggle window transparency, exec, omarchy-hyprland-active-window-transparency-toggle
 bindd = SUPER SHIFT, BACKSPACE, Toggle window gaps, exec, omarchy-hyprland-window-gaps-toggle
 bindd = SUPER CTRL, BACKSPACE, Toggle single-window square aspect, exec, omarchy-hyprland-window-single-square-aspect-toggle
 
@@ -27,6 +28,7 @@ bindd = SUPER SHIFT ALT, COMMA, Restore last notification, exec, makoctl restore
 # Toggles
 bindd = SUPER CTRL, I, Toggle locking on idle, exec, omarchy-toggle-idle
 bindd = SUPER CTRL, N, Toggle nightlight, exec, omarchy-toggle-nightlight
+bindd = SUPER CTRL, Delete, Toggle laptop display, exec, omarchy-hyprland-monitor-internal-toggle
 
 # Control Apple Display brightness
 bindd = CTRL, F1, Apple Display brightness down, exec, omarchy-brightness-display-apple -5000
@@ -42,8 +44,8 @@ bindd = SUPER, PRINT, Color picker, exec, pkill hyprpicker || hyprpicker -a
 bindd = SUPER CTRL, S, Share, exec, omarchy-menu share
 
 # Waybar-less information
-bindd = SUPER CTRL ALT, T, Show time, exec, notify-send "    $(date +"%A %H:%M  —  %d %B W%V %Y")"
+bindd = SUPER CTRL ALT, T, Show time, exec, notify-send -u low "    $(date +"%A %H:%M  ·  %d %B %Y  ·  Week %V")"
-bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send "$(omarchy-battery-status)"
+bindd = SUPER CTRL ALT, B, Show battery remaining, exec, notify-send -u low "$(omarchy-battery-status)"
 
 # Control panels
 bindd = SUPER CTRL, A, Audio controls, exec, omarchy-launch-audio

default/hypr/looknfeel.conf

@@ -122,6 +122,7 @@ master {
 misc {
     disable_hyprland_logo = true
     disable_splash_rendering  = true
+    disable_scale_notification = true
     focus_on_activate = true
     anr_missed_pings = 3
     on_focus_under_fullscreen = 1

default/limine/default.conf

@@ -2,7 +2,7 @@ TARGET_OS_NAME="Omarchy"
 
 ESP_PATH="/boot"
 
-KERNEL_CMDLINE[default]="@@CMDLINE@@"
+KERNEL_CMDLINE[default]+="@@CMDLINE@@"
 KERNEL_CMDLINE[default]+=" quiet splash"
 
 ENABLE_UKI=yes

default/makima/AT Translated Set 2 keyboard.toml

@@ -1,7 +0,0 @@
-# Run omarchy-restart-makima after any changes
-
-[remap]
-KEY_LEFTMETA-KEY_LEFTSHIFT-KEY_F23 = ["KEY_LEFTMETA", "KEY_LEFTALT", "KEY_SPACE"]
-
-[settings]
-GRAB_DEVICE = "true"

default/nautilus-python/extensions/localsend.py

@@ -0,0 +1,84 @@
+import os
+import shutil
+
+from gi import require_version
+
+require_version("Nautilus", "4.1")
+
+from gi.repository import GObject, Gio, Nautilus
+
+
+class SendViaLocalSendAction(GObject.GObject, Nautilus.MenuProvider):
+    def _launch_localsend(self, paths):
+        command = self._resolve_command()
+        if not command:
+            return
+
+        if command[-1] == "@@":
+            command = command + paths + ["@@"]
+        else:
+            command = command + paths
+
+        Gio.Subprocess.new(command, Gio.SubprocessFlags.NONE)
+
+    def _resolve_command(self):
+        localsend = shutil.which("localsend")
+        if localsend:
+            return [localsend, "--headless", "send"]
+
+        flatpak = shutil.which("flatpak")
+        if flatpak and self._has_flatpak_app(flatpak, "org.localsend.localsend_app"):
+            return [
+                flatpak,
+                "run",
+                "--file-forwarding",
+                "org.localsend.localsend_app",
+                "@@",
+            ]
+
+        return None
+
+    def _has_flatpak_app(self, flatpak, app_id):
+        process = Gio.Subprocess.new(
+            [flatpak, "info", app_id],
+            Gio.SubprocessFlags.STDOUT_SILENCE | Gio.SubprocessFlags.STDERR_SILENCE,
+        )
+        return process.wait_check()
+
+    def _selected_paths(self, files):
+        paths = []
+
+        for file in files:
+            location = file.get_location()
+            if not location:
+                continue
+
+            path = location.get_path()
+            if path and path not in paths:
+                paths.append(path)
+
+        return paths
+
+    def _make_item(self, paths):
+        label = (
+            "Send via LocalSend" if len(paths) == 1 else "Send selected via LocalSend"
+        )
+        item = Nautilus.MenuItem(
+            name="LocalSendNautilus::send_via_localsend",
+            label=label,
+            icon="localsend",
+        )
+        item.connect("activate", self._on_activate, paths)
+        return item
+
+    def _on_activate(self, _menu, paths):
+        self._launch_localsend(paths)
+
+    def get_file_items(self, *args):
+        files = args[0] if len(args) == 1 else args[1]
+        paths = self._selected_paths(files)
+
+        if not paths or not self._resolve_command():
+            return []
+
+        return [self._make_item(paths)]

default/systemd/system-sleep/resume-boost

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+# Temporarily switch to performance power profile on resume
+# to avoid sluggishness while the system catches up, then
+# restore the previous profile after 10 seconds.
+
+if [[ $1 == "pre" ]]; then
+  mkdir -p /run/omarchy
+  powerprofilesctl get > /run/omarchy/power-profile-before-sleep
+fi
+
+if [[ $1 == "post" ]]; then
+  previous=$(cat /run/omarchy/power-profile-before-sleep 2>/dev/null || echo "balanced")
+  powerprofilesctl set performance
+  systemd-run --on-active=10 --timer-property=AccuracySec=1 powerprofilesctl set "$previous"
+fi

default/systemd/system-sleep/unmount-fuse

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# Lazy-unmount gvfsd-fuse filesystems before suspend/hibernate to prevent the
+# kernel's process freeze from timing out. FUSE daemons (like gvfsd-fuse from
+# Nautilus) can block in uninterruptible sleep during freeze, causing suspend
+# to silently fail. After wake, restart gvfs so the FUSE mount is restored.
+
+if [[ $1 == "pre" ]]; then
+  while IFS=' ' read -r _ mountpoint fstype _; do
+    if [[ $fstype == fuse.gvfsd-fuse ]]; then
+      mountpoint=$(printf '%b' "$mountpoint")
+      fusermount3 -uz "$mountpoint" 2>/dev/null || fusermount -uz "$mountpoint" 2>/dev/null || true
+    fi
+  done < /proc/mounts
+fi
+
+if [[ $1 == "post" ]]; then
+  # Run in background — user.slice is still frozen at this point, so a
+  # synchronous restart would block the thaw for up to 90 seconds.
+  (
+    sleep 5
+    for uid_dir in /run/user/*; do
+      uid=$(basename "$uid_dir")
+      if [[ -S $uid_dir/bus ]]; then
+        sudo -u "#$uid" env \
+          DBUS_SESSION_BUS_ADDRESS="unix:path=$uid_dir/bus" \
+          XDG_RUNTIME_DIR="$uid_dir" \
+          systemctl --user restart gvfs-daemon.service 2>/dev/null || true
+      fi
+    done
+  ) &
+fi

install/config/all.sh

@@ -14,18 +14,19 @@ run_logged $OMARCHY_INSTALL/config/mise-work.sh
 run_logged $OMARCHY_INSTALL/config/fix-powerprofilesctl-shebang.sh
 run_logged $OMARCHY_INSTALL/config/docker.sh
 run_logged $OMARCHY_INSTALL/config/mimetypes.sh
-run_logged $OMARCHY_INSTALL/config/remove-fcitx5-autostart.sh
+run_logged $OMARCHY_INSTALL/config/nautilus-python.sh
 run_logged $OMARCHY_INSTALL/config/localdb.sh
 run_logged $OMARCHY_INSTALL/config/walker-elephant.sh
 run_logged $OMARCHY_INSTALL/config/fast-shutdown.sh
+run_logged $OMARCHY_INSTALL/config/unmount-fuse.sh
 run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
 run_logged $OMARCHY_INSTALL/config/input-group.sh
-run_logged $OMARCHY_INSTALL/config/makima.sh
 run_logged $OMARCHY_INSTALL/config/omarchy-ai-skill.sh
 run_logged $OMARCHY_INSTALL/config/kernel-modules-hook.sh
 run_logged $OMARCHY_INSTALL/config/powerprofilesctl-rules.sh
 run_logged $OMARCHY_INSTALL/config/wifi-powersave-rules.sh
 run_logged $OMARCHY_INSTALL/config/plocate-ac-only.sh
+
 run_logged $OMARCHY_INSTALL/config/hardware/network.sh
 run_logged $OMARCHY_INSTALL/config/hardware/set-wireless-regdom.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-fkeys.sh
@@ -34,17 +35,31 @@ run_logged $OMARCHY_INSTALL/config/hardware/printer.sh
 run_logged $OMARCHY_INSTALL/config/hardware/usb-autosuspend.sh
 run_logged $OMARCHY_INSTALL/config/hardware/ignore-power-button.sh
 run_logged $OMARCHY_INSTALL/config/hardware/nvidia.sh
-run_logged $OMARCHY_INSTALL/config/hardware/intel.sh
 run_logged $OMARCHY_INSTALL/config/hardware/vulkan.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-intel-panther-lake-display.sh
+
-run_logged $OMARCHY_INSTALL/config/hardware/fix-f13-amd-audio-input.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/video-acceleration.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/lpmd.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/thermald.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/ipu7-camera.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/ptl-kernel.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/fix-wifi7-eht.sh
+run_logged $OMARCHY_INSTALL/config/hardware/intel/resume-boost.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-haptic-touchpad.sh
+run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-ptl-display.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-audio-mixer.sh
+run_logged $OMARCHY_INSTALL/config/hardware/asus/fix-mic.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/framework/fix-f13-amd-audio-input.sh
+run_logged $OMARCHY_INSTALL/config/hardware/framework/qmk-hid.sh
+
+run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-spi-keyboard.sh
+run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-suspend-nvme.sh
+run_logged $OMARCHY_INSTALL/config/hardware/apple/fix-t2.sh
+
 run_logged $OMARCHY_INSTALL/config/hardware/fix-bcm43xx.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-spi-keyboard.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-suspend-nvme.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-apple-t2.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-surface-keyboard.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-audio-mixer.sh
-run_logged $OMARCHY_INSTALL/config/hardware/fix-asus-rog-mic.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-yt6801-ethernet-adapter.sh
 run_logged $OMARCHY_INSTALL/config/hardware/fix-synaptic-touchpad.sh
-run_logged $OMARCHY_INSTALL/config/hardware/framework16-qmk-hid.sh
+run_logged $OMARCHY_INSTALL/config/hardware/fix-tuxedo-backlight.sh

install/config/hardware/apple/fix-t2.sh

@@ -19,6 +19,7 @@ if lspci -nn | grep -q "106b:180[12]"; then
   sudo systemctl enable tiny-dfr.service
 
   echo "apple-bce" | sudo tee /etc/modules-load.d/t2.conf >/dev/null
+  echo "hci_bcm4377" | sudo tee -a /etc/modules-load.d/t2.conf >/dev/null
 
   echo "MODULES+=(apple-bce usbhid hid_apple hid_generic xhci_pci xhci_hcd)" | sudo tee /etc/mkinitcpio.conf.d/apple-t2.conf >/dev/null
 
@@ -31,5 +32,13 @@ EOF
   cat <<EOF | sudo tee /etc/limine-entry-tool.d/t2-mac.conf >/dev/null
 # Generated by Omarchy installer for T2 Mac support
 KERNEL_CMDLINE[default]+=" intel_iommu=on iommu=pt pcie_ports=compat"
+EOF
+
+  cat <<EOF | sudo tee /etc/t2fand.conf >/dev/null
+[Fan1]
+low_temp=55
+high_temp=75
+speed_curve=linear
+always_full_speed=false
 EOF
 fi

install/config/hardware/dell/fix-xps-haptic-touchpad.sh

@@ -0,0 +1,36 @@
+# Fix Dell XPS haptic touchpad.
+# The Synaptics haptic touchpad (vendor 06CB) uses the HID Manual Trigger
+# protocol, but the kernel's HID haptic subsystem only supports Auto Trigger.
+# This sets up a lightweight daemon that monitors touchpad button events and
+# sends haptic pulses via HID feature reports on the hidraw device.
+# Also disables I2C runtime PM to prevent the haptic engine losing state
+# across suspend/resume.
+
+if omarchy-hw-match "XPS" \
+  && ls /sys/bus/i2c/devices/i2c-VEN_06CB:00 2>/dev/null; then
+
+  # Keep I2C controller power on to prevent haptic engine losing state
+  sudo tee /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules << 'EOF'
+ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:19.0", ATTR{power/control}="on"
+ACTION=="add", SUBSYSTEM=="platform", KERNEL=="i2c_designware.0", ATTR{power/control}="on"
+EOF
+  sudo udevadm control --reload-rules
+
+  # Haptic feedback daemon as a systemd service
+  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << SVC
+[Unit]
+Description=Dell XPS haptic touchpad feedback
+After=systemd-udev-settle.service
+
+[Service]
+Type=simple
+ExecStart=$OMARCHY_PATH/bin/omarchy-haptic-touchpad
+Restart=on-failure
+RestartSec=2
+
+[Install]
+WantedBy=multi-user.target
+SVC
+  sudo systemctl daemon-reload
+  sudo systemctl enable dell-xps-haptic-touchpad.service
+fi

install/config/hardware/dell/fix-xps-ptl-display.sh

@@ -0,0 +1,20 @@
+# Fix display issues on Dell XPS Panther Lake (Xe3) systems.
+# Xe PSR causes freezes and display glitches on both OLED and IPS panels.
+# LG OLED panels also need Panel Replay disabled.
+if omarchy-hw-match "XPS" && omarchy-hw-intel-ptl; then
+  echo "Detected Dell XPS on Panther Lake, applying display power-saving fixes..."
+
+  if omarchy-hw-dell-xps-oled; then
+    CMDLINE='KERNEL_CMDLINE[default]+=" xe.enable_psr=0 xe.enable_panel_replay=0"'
+    COMMENT='Disable Xe PSR and Panel Replay on Dell XPS Panther Lake OLED systems'
+  else
+    CMDLINE='KERNEL_CMDLINE[default]+=" xe.enable_psr=0"'
+    COMMENT='Disable Xe PSR on Dell XPS Panther Lake systems'
+  fi
+
+  sudo mkdir -p /etc/limine-entry-tool.d
+  cat <<EOF | sudo tee /etc/limine-entry-tool.d/dell-xps-ptl-display.conf >/dev/null
+# $COMMENT
+$CMDLINE
+EOF
+fi

install/config/hardware/fix-intel-panther-lake-display.sh

@@ -1,18 +0,0 @@
-# Fix display issues on Intel Panther Lake (Xe3) GPUs by disabling power-saving
-# features that cause screen to run at 10hz (e.g. Dell XPS 2026).
-if lspci | grep -iE 'vga|3d|display' | grep -qi 'panther lake'; then
-  echo "Detected Intel Panther Lake GPU, applying display fixes..."
-
-  PANTHER_LAKE_CMDLINE='KERNEL_CMDLINE[default]+=" xe.enable_psr=0 xe.enable_panel_replay=0 xe.enable_fbc=0 xe.enable_dc=0"'
-
-  sudo mkdir -p /etc/limine-entry-tool.d
-  cat <<EOF | sudo tee /etc/limine-entry-tool.d/intel-panther-lake-display.conf >/dev/null
-# Fix Panther Lake display issues by disabling Xe power-saving features
-$PANTHER_LAKE_CMDLINE
-EOF
-
-  # Also append to /etc/default/limine if it exists, since it overrides drop-in configs
-  if [ -f /etc/default/limine ] && ! grep -q 'xe.enable_psr' /etc/default/limine; then
-    echo "$PANTHER_LAKE_CMDLINE" | sudo tee -a /etc/default/limine >/dev/null
-  fi
-fi

install/config/hardware/fix-tuxedo-backlight.sh

@@ -0,0 +1,15 @@
+# Install Tuxedo drivers for keyboard backlighting on Tuxedo laptops and
+# compatible devices like the Slimbook Executive (Clevo/Tuxedo chassis).
+if cat /sys/class/dmi/id/sys_vendor 2>/dev/null | grep -qi "TUXEDO\|Slimbook"; then
+  omarchy-pkg-add linux-headers tuxedo-drivers-nocompatcheck-dkms
+
+  # Blacklist the legacy clevo_xsm_wmi module which conflicts with the tuxedo-drivers
+  # clevo_wmi module. When clevo_xsm_wmi loads first, it grabs the Clevo WMI GUIDs,
+  # preventing tuxedo-drivers from initializing the keyboard backlight properly.
+  echo "blacklist clevo_xsm_wmi" | sudo tee /etc/modprobe.d/blacklist-clevo-xsm-wmi.conf > /dev/null
+
+  # Remove any orphaned clevo_xsm_wmi module files not managed by a package
+  for f in /lib/modules/*/extra/clevo-xsm-wmi.ko; do
+    [ -f "$f" ] && sudo rm "$f"
+  done
+fi