* Place a bar widget on a bar without the widget it names
'omarchy bar put X --after Y' refused outright when Y was not on the bar, so
migration 1786279107 failed for every user whose clock is their own clone of
omarchy.clock rather than the built-in, and took the rest of the migration
chain down with it. put is the verb a migration or an install reaches for
precisely because it cannot know what the bar it places into looks like, so it
now falls back to the widget's usual spot instead of failing. 'plugin enable',
which someone types, still says when it cannot find the target.
A clone also answers as a placement target now, whether it is the widget the
placement named or the anchor the fallback lands against: cloning the clock
leaves a bar carrying your id where omarchy.clock used to be, and a caller
naming the source means the clone that took its place, the way resolveEnabledId
already routes calls to it. So the widget sits next to that clock rather than
at the end of the section.
Fixes#6678
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep asking a shell that is still starting
An 'omarchy update' landing while the shell restarts failed migration
1786279107 twice over. Quickshell answers a call made before it finishes
loading with "Not ready to accept queries yet." on stdout and exits 0, so a
caller polling with a ping read a starting shell as up and then took that
sentence for the answer to its real call; report it as unreachable, which every
caller already knows how to handle, and omarchy-restart-shell stops cutting its
readiness loop short on it too.
Reading the plugin manifests is a subprocess behind that, so IPC starts
answering before the registry knows the widget it is being asked to place, and
put refused it as unknown. Say which of the two it is and let put keep asking.
Only a shell that was never there is nothing to fail over. One that never
finishes starting, one that stops responding, one too old to know the call at
all: each has to fail, since omarchy-migrate records a migration that returns 0
as done, and the widget is then never placed and never asked for again.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Fall back for the shell an update has not restarted yet
omarchy-update runs its migrations before omarchy-update-restart, so the shell
answering migration 1786279107 on the update that carries this fix is still the
one that shipped without it, and it refuses the placement exactly as before.
The users this is for would have watched one more update go wrong. put owns the
fallback it documents, so let the command carry it: asked again without the
neighbour the shell says it cannot find, that shell places the widget.
A restarted shell never answers this way — it falls back itself, and knows to
look for a clone of the widget the placement named, which the command cannot.
Having answered once is now remembered across both asks. A shell that speaks
and is then gone has stopped mid-request, and reading that as a machine that
never had one would leave the migration recorded as done.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wait for a shell that has not appeared yet
A shell being spawned has no socket to answer on, and nothing tells the command
a launch is under way, so a put landing in that window read the silence as a
machine without a shell and carried on — leaving the migration recorded as done
with nothing placed. Give one three seconds to turn up first. A machine that
genuinely has no shell still carries on, three seconds later.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Leave a clone of the widget being put where it is
A clone is the widget it was cloned from wearing its owner's name, so a bar
carrying one already has what put is being asked to place. put only saw the
literal id, and enabling a first-party source whose clone is active is how you
switch back to the built-in — so a migration placing omarchy.keyboard-layout
would have handed a user's own copy back for the shipped one, and called it
done. Targeting learned to read a clone as its source; presence had not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the comments on the bar put path
Roughly a line of comment per line of code, most of it restating what the code
and the assertion messages already say.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Hide the keyboard layout widget on a single-layout install
There is nothing to read or switch when only one layout is configured, so the
label is noise on the bar most people have. Hide it until the keyboard reports
more than one, and keep showing it on a Hyprland that doesn't report the list
at all rather than hiding the widget everywhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put the keyboard layout widget on the bar by default
The widget hides itself unless the active keyboard has more than one layout,
so shipping it costs a single-layout machine nothing and saves everyone else
from finding it in the plugin list. Sit it just right of the clock, and add it
to existing bars the way the agents widget was added, leaving a curated bar
and a disabled widget alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Cycle the layout with the hyprctl command that exists
switchxkblayout is a hyprctl command, not a dispatcher, so sending it over the
dispatch socket only produced a Lua syntax error and clicking the widget did
nothing. Run it instead, against the keyboard the label was read from.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add an idempotent bar add command
Nothing put a widget on the bar without going through the running shell:
plugin enable and bar move both forward to it over IPC, which a migration
cannot rely on. Add writes the config file the way position and transparent
already do, and leaves a widget that is already on the bar where the user put
it, so callers can ask for it repeatedly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put the keyboard layout widget on bars through the bar CLI
The hand-written jq was a normalizer, a presence check and a splice for what
is now one command that carries all three.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep bar add from writing a bar the shell was not reading
The shell takes a user shell.json only when it parses, says version 1, and
carries a bar layout, and does not deep-merge; anything else leaves the
shipped defaults on screen. Reading and writing the user file regardless
turned a config holding nothing but an idle timeout into a bar holding
nothing but the new widget, and made an unparsable one abort the migration
chain on every update. Work against whichever layout is actually in effect,
seeding the defaults before placing a widget they do not already carry.
A malformed hand-installed manifest fails the whole plugin catalog, which was
enough to refuse a first-party widget, so treat an unreadable catalog as no
answer rather than a no. Leave a widget listed in disabledPlugins off the bar
instead of writing a layout entry the registry refuses to load, and re-check
presence inside the mutation so two adds cannot both miss it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Read a widget's default bar section in one place
cmd_defaults spelled out the same "defaultSection, or center when it is
missing or not a section" rule that the add path already asks for by name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Rename bar add to bar put
'omarchy plugin add' installs a plugin and 'omarchy bar add' placed one that
was already installed, which is too much meaning for one verb.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Place a newly added bar widget with bar put
plugin add reached the bar through plugin enable, which forwards to the
running shell, so it first had to poll until the shell noticed the clone and
then failed outright when no shell was there to ask. Putting a widget on the
bar is a config edit, so do that directly and leave plugin enable to the
plugins that need registering rather than placing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put bar widgets through the shell instead of the config file
Placing a widget existed twice: once in PluginRegistry, which the shell uses
and owns the config it holds in memory, and once as jq against shell.json.
The second was there so migrations could run without a shell, which they do
not need to: the Quattro upgrade hands over the shipped shell.json before it
runs any, and every other path runs inside a session with a shell up. Ask the
shell, and say so and carry on when there is none to ask.
putBarWidget enables only what is not already on the bar, which is what a
caller that cannot know whether it ran before needs, and is the one thing the
existing enable path would not do.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
omarchy bar transparent now accepts toggle, flipping the current value
in one jq update (absent counts as opaque, matching the shell).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Position the bar by dragging (or click-and-holding) empty bar space
toward a screen edge, with a ghost slab previewing the target edge.
With drag for position and double-click for transparency, the bar
config panel, its inline gear button, and the omarchy-launch-bar-settings
CLI are no longer needed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The omarchy-bar command had grown three overlapping ways to inspect the
bar (show/layout/list/options, plus selected/active/available/widgets
aliases) and mixed layout mutation in with bar-level settings. Untangle
it into two focused commands:
- omarchy-bar keeps only the bar-level settings that write shell.json:
use, reset, position, transparent, and settings. reset now delegates
to `use omarchy.bar` rather than duplicating the del(.bar.id) write.
- omarchy-bar-plugin owns all layout mutation: add, move, remove, set,
and replace, with the placement flags and jq resolve/anchor helpers.
`omarchy bar plugin ...` routes here via the dispatcher.
Drop the inspection commands entirely: the layout is visible on the bar,
the config is shell.json, and widget/option ids come from
`omarchy plugin list`. Nothing consumed the show output programmatically
except tests. This also removes omarchy-bar-position, whose jq write was
a duplicate of `omarchy bar position`.
Strip environment-invariant guards (require_command, require_omarchy_path)
that defended against jq or OMARCHY_PATH being absent — neither happens on
a real system. Keep the user-input validation (--section/--index) and the
atomic shell.json write.
Update callers (service install/remove, refresh-shell, plugin-clone,
plugin enable), keybindings, the menu, tests, and docs to the new split.
cmd_replace fed $PLACEMENT_FROM_SECTION/$PLACEMENT_FROM_INDEX to jq
without ever calling parse_placement, so they were always empty
strings that implied flag support which does not exist. Pass literal
empties with a comment stating replace resolves by widget id only.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
omarchy-plugin mixed plugin lifecycle, clone/edit, and bar-layout mutation.
The bar layout was mutated by two separate engines (an embedded Python
mutate_bar here and jq in omarchy-config-shell-bar), each with its own
manifest walker.
- omarchy-plugin is now a ~220-line router; clone and edit move to
omarchy-plugin-clone and omarchy-plugin-edit, matching the existing
plugin-{source,add,update,remove,available,validate,scan} sibling pattern
- omarchy-config-shell-bar is replaced by omarchy-bar, the single bar engine
(show/layout/list/options/use/reset/add/move/remove/set/replace/position/
transparent/settings) with one jq pipeline; the Python mutate_bar and its
python3 dependency are gone
- omarchy-plugin-catalog is the shared manifest scanner used by omarchy-bar
(widget/option enumeration, add validation) and omarchy-plugin-clone
(source enumeration), replacing three find|jq re-implementations
- service install/remove and refresh-shell call omarchy-bar; docs and tests
updated to the new command surface
