* Reshape the agent launcher into omarchy agent
omarchy-launch-agent becomes omarchy-agent, with prompts on omarchy-agent-prompt
rather than the bare route: `omarchy agent` is both a command and a group, so a
positional prompt there would shadow any subcommand under it. The launcher takes
flags only and points at `omarchy agent prompt` when handed one.
Every agent window now launches under a fixed org.omarchy.agent app-id instead of
omarchy-launch-tui's default of org.omarchy.<binary>, so one rule floats them all
whichever agent is default.
Omarchy also stops picking an agent for you. omarchy-default-agent prints nothing
until one is chosen, leaving every entry under Setup > Defaults > Agent unchecked,
and a first-run invitation offers to take you there.
* Wordsmith
* Cover the agent routes and the invitation
The route split is the point of the change, so exercise `omarchy agent`,
`omarchy agent prompt`, and a rejected positional prompt through the router
rather than only the binaries behind them.
The invitation gets the same treatment as the Voxtype and fingerprint ones: it
notifies once, opens the agent defaults menu, and leaves both the notification
and the marker alone for anyone who already chose an agent.
* Offer the agent choice from the keybinding
Super + Shift + Ctrl + A now runs `omarchy-agent --pick`, which opens Setup >
Defaults > Agent when nothing is chosen yet. A keypress that writes to stderr
and opens nothing just looks broken.
* Reach existing installs with the agent invitation
first-run installs the invitation hook, and existing accounts marked it complete
long ago, so they would never see it -- while being the accounts most likely to
need it, since the old getter returned opencode implicitly and most have no
agent recorded at all. Post-update hooks run later in the same update, so the
invitation arrives without waiting for another one.
* Say what the Defaults submenus set
Setup > Defaults lists Agent, Browser, Terminal, Editor, but the header inside
each repeated the same bare word, which reads as a category rather than a
setting -- and says nothing at all when the menu is summoned straight into it.
The list keeps its short labels; the headers now name the setting.
Drops the ChatGPT web app from the default set at the same time, so installing
the openai-codex-desktop package can't leave two identical-looking ChatGPT
entries in the launcher. Super + Shift + A still opens the web version, which
is the only place it was really used.
The bundled ChatGPT icon stays: the package's own chatgpt.desktop asks for
Icon=chatgpt and ships no hicolor icon of its own.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every other pointer at the community lives in an error path or a doc, so
there was no way to reach it from the menu. Prefer the Discord app when
it is installed, and fall back to the invite in a browser when it is not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Herdr ships its own annotated keybindings menu, same as Tmux, but nothing
in the menu pointed at it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
lspci reads PCI config space, and the kernel resumes a runtime-suspended
device to serve that read. On a hybrid laptop the discrete GPU idles in
D3cold, so the first lspci of a Hyprland config load spends over a second
waking it — longer than the 1.5s budget Hyprland gives the whole load.
The reload then fails at whichever line runs next, which is why the error
pointed at default/hypr/apps/1password.lua rather than at nvidia.lua.
Read the vendor, class, and device IDs from sysfs instead. Those are
served from cached fields and never touch config space, so nothing wakes
up. Classify by device ID while we're here: Turing is both the first
generation with GSP firmware and the first at 0x1e00 or above, and
Maxwell opens at 0x1340, one ID past the last Kepler part. Bounding the
older detector at both ends keeps pre-Maxwell cards off the 580xx driver
that cannot drive them, and picks up the Maxwell and Pascal parts the
lspci name regex used to miss.
omarchy-hw-nvidia was also checked in without its executable bit, which
it needs now that nvidia.lua runs it.
Fixes#6660
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Sharing a file or folder over LocalSend opened a terminal to run an fzf
pick over a find of the whole home directory, which is slow on a large
home, shows no previews, and looks nothing like the rest of the desktop.
The portal chooser is already how the other pickers here ask.
The chooser has a directory mode, so folder sharing asks for one the same
way, and neither entry needs a terminal to host a picker anymore.
A chooser that never opens is told apart from nobody picking anything, so
a portal failure says so rather than passing for a cancelled share.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Select a screen region and decode the QR code in it to the clipboard, so
an otpauth:// setup code shown on screen no longer needs a phone.
The decoded value is only ever placed on the clipboard, and marked
sensitive so clipboard history skips it. Decoding is restricted to QR so
a stray barcode elsewhere on screen can't take the clipboard instead.
Co-authored-by: Hlib Kanunnikov <hlibwondertan@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The letters name a panel; the numbers count them. One is the leftmost
panel in the right section, so the number matches the icon a user would
point at: a widget with no panel of its own is passed over, and so is one
that is hiding itself.
Counting rather than naming means the hotkeys follow the bar. Rearranging
the section, or adding a widget to it, renumbers the panels with no
binding to rewrite.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Warping to a target window's center selects the wrong window when a smaller
one covers that center: slurp keeps highlighting the coverer, so Tab could
never leave it. Navigation now warps to the most central point that resolves
back to the target, and skips windows that hovering could not reach either.
Unbinding the picker's transient keys by name also took a same-key binding
out of the user's own config with it; the bind handles are now kept and
removed individually.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keyboard window capture in the region picker: Ctrl+Return, Tab, arrows
Return already captures the entire focused monitor while slurp is open,
but grabbing a single window required the mouse: hover highlights a
window, a click captures it. Now the keyboard can do the same.
Ctrl+Return captures the selected window — the one under the cursor,
falling back to the focused window. Tab and Ctrl+Tab cycle that
selection through the workspace's windows in reading order, and the
arrow keys move it spatially; both warp the cursor to the target
window's center, so slurp's own hover highlight tracks the selection.
Ctrl+Return is implemented like --take-fullscreen: a layer-scoped bind
flags the intent via a marker file and dismisses slurp, and the picker
resolves the window under the cursor. On an empty workspace the pick
resolves to nothing and exits as cancelled.
Ctrl is the chord modifier because slurp reacts to held Shift by
squaring the selection's aspect ratio, which visibly reshapes the
hover highlight mid-chord. None of the keys slurp itself uses (Escape,
held Space to move a selection, held Shift) are bound, so its own
keyboard behavior is unchanged.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Resolve overlapping windows the way slurp highlights them
slurp highlights the smallest box under the cursor, but the capture and
selection hit-tests returned the first geometric match in hyprctl
clients order. With a floating window over a tiled one, Ctrl+Return
could capture the window underneath the visibly highlighted one. Track
the smallest containing window instead, in both the capture resolution
and the selection-movement origin.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Document the region picker's keyboard modes in its usage line
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Resolve keyboard capture and navigation from one rectangle list
Duplicate window geometry (tabbed groups, stacked floating windows) stalled
the Tab cycle on the first copy, and the smallest-window-under-cursor
tie-break was applied to two differently ordered lists, so navigation could
cycle from one window while Ctrl+Return captured another. Ctrl+Return over a
gap or an empty workspace also ignored the monitor rectangle slurp was
highlighting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Capture the highlighted window with Return, the display with Ctrl+Return
The picker highlights a window under the cursor far more often than a whole
display, so the unmodified key takes the highlighted rectangle.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Mirrors the Tmux keybindings menu on SUPER + ALT + K. Herdr has no CLI
that dumps resolved bindings, so the action list and its defaults come
from `herdr --default-config`, where every action appears as a commented
assignment, and the user config overrides what it sets.
Prose in that default config can read like an assignment, as in
`# type = "popup" opens a session-modal terminal`, so a line counts only
when its value is a bare string or an array of them. Both TOML quote
characters open a string, and with no config file at all the listing
shows Herdr's own defaults rather than the Omarchy seed config Herdr
never loaded.
Mirrors the Tmux binding on SUPER + ALT + RETURN. Herdr reattaches to the
persistent session on its own, so the launcher needs no attach-or-create
dance.
/etc/profile.d/locale.sh only runs for login shells, so bash started by
SSH or herdr's remote bridge ran in the C locale, where printf emits
\u/\U escapes literally instead of the character.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add OEM first-boot setup and factory reset
An OEM-mode ISO install (or omarchy-reset-computer) leaves the machine in OEM
state: fully installed, no user, /var/lib/omarchy/oem/pending armed. On the
next boot omarchy-oem-setup.service runs the configurator's user form on tty1,
creates the user with the groups system setup recorded, finalizes it offline
from the stashed Node tarball, re-keys LUKS from the throwaway install
passphrase to the user's password, and hands off to SDDM.
omarchy-reset-computer returns a machine to that state: it swaps the running
root for a fresh clone of the @factory snapshot the ISO takes at install time,
scrubs machine identity and prior users, and stages omarchy-factory-wipe to
drop the old root and recreate @home/@log on the next boot. Machines installed
before @factory existed get a degraded reset (current system kept, users and
state wiped) with that caveat surfaced in the confirmation.
omarchy-setup-system/-hardware gain --oem to run without an install user; the
group-granting install scripts now record their groups in
/var/lib/omarchy/oem/groups and only call usermod when the user exists.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Harden OEM setup: correct cryptsetup key-file usage, retry on failure
cryptsetup reads --test-passphrase/--key-file inputs byte-for-byte, so feed
passphrases through process substitution consistently instead of positional
args or stdin (which has different newline semantics). Run each first-boot
setup attempt as its own process so a failure offers a retry instead of
stranding the machine at a user-less login screen — bash ignores errexit
inside `while !` conditions, a child process does not.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Always grant wheel sudo in OEM first-boot setup
Detecting an existing %wheel grant by grepping sudoers is error-prone:
omarchy ships narrow '%wheel ALL=(ALL) NOPASSWD: <command>' rules (e.g.
asdcontrol) that match the naive pattern, which left the OEM-created user
matching sudoers entries but unable to run anything. Write the drop-in
unconditionally — a duplicate of an existing full grant is harmless.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Fix LUKS re-key device resolution and OEM state readability
archinstall's encrypted installs put cryptdevice=PARTUUID=... on the kernel
cmdline, not UUID=, so the first-boot re-key never found its device and
silently skipped — leaving the throwaway auto-unlock keyfile in place, i.e.
the disk effectively unencrypted. Parse every cryptdevice= source spec form
and make any re-key failure abort the attempt loudly: a retry prompt beats a
machine that quietly boots without a passphrase forever.
The OEM state directory also has to be world-readable (its one secret,
luks-key, stays 0600): user finalization reads the stashed Node tarball as
the new user, and the 0700 directory forced it onto the network fallback.
Step markers now land in /var/log/omarchy-oem-setup.log for debuggability.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Purge stale machine-id boot entries when resetting or re-keying
limine-entry-tool keys its limine.conf OS entries by machine-id. A factory
reset gives the machine a fresh identity, so the previous system's entry
survived every rebuild, sorted first, and made Limine stop at a Blake2b
hash-mismatch warning once the UKI was rebuilt. Start limine.conf over from
the shipped template (and drop foreign machine-id history directories on the
ESP) before any post-reset rebuild: in the staged chroot rebuild, in the
first-boot LUKS re-key, and — for unencrypted resets, where nothing else
rebuilds — in a dedicated first-boot refresh when foreign entries are found.
The staged rebuild also verifies every UKI hash referenced by limine.conf
against the file on the ESP before the subvolume swap, and the running
system's limine-snapper-sync is runtime-masked during staging so it cannot
rewrite the config behind the rebuild.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Harden reset and first-boot setup failure paths
Review findings from codex and Copilot:
- Generate throwaway passphrases without a trailing head stage: under
pipefail, SIGPIPE from the infinite tr failed the substitution and errexit
aborted every encrypted reset before it could stage anything.
- Stage the fallible parts of a degraded reset (LUKS re-key, boot rebuild)
before arming the wipe, so a staging failure leaves the machine untouched
instead of scheduling a wipe for a reset that never finished.
- Gate first-boot setup on the factory wipe having succeeded
(ConditionPathExists=!wipe-pending plus an in-script guard): creating the
new user on a half-wiped system would hand their data to the wipe retry.
- Abort the wipe (keeping its retry marker) when deleting the old root or
recreating @home/@log fails, and abort resets that cannot remove a prior
account — a surviving account keeps its password and wheel membership.
- Resume a partially-created account on setup retry instead of rejecting the
username the failed attempt just created.
- Only purge machine-id directories the old limine.conf actually referenced;
a shared ESP may hold other installations' boot artifacts.
- Recreate the hibernation swapfile (nested subvolume, so never captured by
the factory snapshot) inside the factory root before its UKI rebuild, so a
reset machine keeps disk-backed swap and a valid resume offset.
- Source base-test.sh in the OEM groups test per test conventions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Recreate the hibernation swapfile even when resume drop-ins survive
omarchy-hibernation-setup short-circuits as 'already set up' when the resume
mkinitcpio drop-in exists — which it always does in a factory root, while the
swapfile itself never survives the snapshot (nested subvolume). Drop the
marker when the swapfile is gone so setup reconfigures from scratch, and
verify the swapfile actually exists before proceeding with the reset.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Second review pass: encrypted-config coverage, factory-baseline sanitization, recoverable rekey
Codex xhigh round 2:
- Detect the LUKS backing device by walking the root's device tree, not only
the cmdline cryptdevice=; reset/first-boot now re-key roots reached via
rd.luks/crypttab too, instead of silently leaving the seller's slots valid.
- Sanitize the retained @factory baseline (accounts, /etc/shadow, machine
identity) during a full reset: the new wheel user could otherwise mount it
to recover the seller's data, and a second reset would restore the account.
- Re-key the disk recoverably: rebuild the no-auto-unlock UKI before killing
the throwaway slot or destroying the staged key, and restore the keyfile if
that rebuild fails, so a retry with a different password can never leave the
disk locked to the first attempt's password.
- Roll back a degraded reset's live-root auto-unlock material if its boot
rebuild fails, instead of leaving it for a later rebuild to embed.
- Treat a missing current-machine limine entry as stale so a retry after a
failed rebuild repairs the config instead of clearing OEM state over it.
- Erase fingerprint enrollments (/var/lib/fprint) in degraded wipes.
- Remove the resume-offset drop-in too when recreating the factory swapfile,
so the rebuilt UKI gets a correct offset.
- Pin first-boot retries to the account the first attempt created.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Expose factory reset in the Setup menu
Add a 'Reset Computer' entry under Setup (Omarchy's Settings menu, where OS
factory resets conventionally live), guarded to btrfs roots and launched in a
floating terminal. omarchy-reset-computer now self-elevates via sudo so the
menu entry needs no sudo prefix, forwarding the caller's gum theme env as
env arguments so styling survives an env_reset sudoers. The typed 'reset'
confirmation and the sudo password prompt remain as the guards against
accidental triggering.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Defer keyboard selection to first boot for OEM installs
The OEM first-boot setup now runs a keyboard step before the user form,
mirroring the ISO configurator: it loads the chosen layout on the live VT so
the password (and the LUKS re-key that follows) are typed under it, and
persists it with systemd-firstboot so the installed system gets both the
console KEYMAP and the XKB layout Hyprland reads — exactly what a normal
install writes. Layouts localectl doesn't know keep the default, same as the
installer.
This lets the OEM operator set nothing user-specific: the machine's owner
picks their keyboard alongside their account at first boot.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Rename factory-reset commands to omarchy-system-factory-reset[-finish]
omarchy-reset-computer -> omarchy-system-factory-reset
omarchy-factory-wipe -> omarchy-system-factory-reset-finish
(and its systemd unit, log path, and temp mount to match)
Pure rename: every reference — the Setup menu action, the first-boot finish
service the reset stages and enables, the oem-setup ordering/gating, comments,
and the menu test — moves together, with no behavior change.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Rename OEM vocabulary to provisioning (runtime)
Commands unify under the provisioning family:
omarchy-oem-setup → omarchy-provision-owner
omarchy-finalize-user → omarchy-provision-user
omarchy-first-run → omarchy-provision-first-run
And the deferred-provisioning state/vocabulary replaces 'OEM':
/var/lib/omarchy/oem/ → /var/lib/omarchy/provisioning/
/etc/omarchy/oem.key → /etc/omarchy/provisioning.key
install/oem/ → install/provisioning/
OMARCHY_SETUP_CONTEXT=oem-firstboot → provision-owner
omarchy-setup-system/-hardware --oem → --defer-provisioning
All callers (provision-first-run→provision-user, autostart, factory-reset
staging the provisioning units, the group-recording scripts) and comments
move together.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop remaining OEM mentions from the provisioning groups test
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Finish the omarchy-first-run rename in the docs
Two doc references to omarchy-first-run were missed when the script was renamed
to omarchy-provision-first-run; update them to match.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Clean up the terminal and reconnect when SSH connections drop
A remote tmux, herdr, or editor arms terminal modes over the SSH pipe
(mouse tracking, focus reporting, the alternate screen) that only it can
disarm. When the connection dies instead of exiting cleanly, those modes
stay armed on the local terminal, and every mouse move floods the prompt
with escape-sequence junk.
Wrap ssh in a shell function that disarms those modes after every exit,
and automatically reconnects when an established interactive session
drops. Remote commands, configured RemoteCommands, and redirected stdin
never reconnect, so their side effects cannot replay, and the retry loop
runs in a subshell so Ctrl-C cancels both the in-flight attempt and the
loop.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Detect dead SSH connections within a minute
Without keepalives, ssh does not notice a dead peer until TCP gives up,
which can take hours of sitting on a hung terminal with remote-armed
terminal modes stuck on. Ship a client keepalive default so drops are
detected in about 45 seconds, letting the shell's ssh wrapper clean up
and reconnect. ~/.ssh/config is read first and wins, so per-host
overrides still apply.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Fail closed when ssh -G cannot resolve the effective config
An unresolvable configuration could hide a RemoteCommand, so treat it
as non-interactive rather than reconnectable. Also strengthen the
tests from Copilot review: assert the complete disarm sequence, and
verify on a real interactive pty that Ctrl-C during a retry attempt
kills the reconnect loop itself, not just the in-flight attempt.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Tolerate the explicit RemoteCommand none when probing ssh -G
The literal "none" is how ssh_config cancels a configured
RemoteCommand, and some OpenSSH versions emit it even when unset, which
would have silently disabled reconnecting entirely. Treat it as no
remote command while still failing closed on real ones and unresolvable
configs, and make the fake ssh -G emit the "none" form so the behavior
tests cover it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The class is matched in full, so the bare "foot" alternative never covered
a window carrying org.codeberg.dnkl.foot. That left universal copy sending
CTRL + C into a terminal, the same way it did for the Omarchy TUIs.
default/hypr/apps/system.lua already treats that app-id as a foot window.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Ship herdr with a config that mirrors our tmux setup
Installs herdr through the mise shim, ships the matching config as an
Omarchy default, and adds the usual refresh/restart pair. The keybindings
map tmux sessions to workspaces, windows to tabs, and keep both the prefix
and direct bindings from config/tmux/tmux.conf.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add herdr versions of the tmux dev layout functions
hdl, hds, hdlm, and hsl drive herdr through its socket API instead of
tmux. hsl tiles into a real grid since herdr has no select-layout tiled.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Namespace the herdr layout helpers so they stay out of the shell
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Create hdlm's tabs in its own workspace instead of the focused one
herdr tab create follows the focused workspace without --workspace, so
switching workspaces while hdlm loops scatters the new tabs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Lay hsl's grid out in visual order
Splitting the first column repeatedly inserted each new column between it
and the previous one, so uneven counts put the spare row in a middle
column instead of the last.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Report herdr config reload failures instead of swallowing them
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Hide herdr's pane scrollbars to match tmux
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Escape queued herdr layout commands
* Install herdr from the omarchy-herdr package instead of mise
* Use native herdr resize keybindings for tmux-style pane resizing
* Rename the omarchy-herdr package to herdr
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
afa2839a5a (Rename bg/fg palette keys to background/foreground)
aliased `color0` to plain background in theme color resolution, but
the Helix template still uses `color0` as the subtle surface shade
behind `ui.cursorline.primary`, `ui.virtual.ruler`, `ui.highlight`, and
`ui.text.focus`. All four now render at exactly the background color
and vanish: no cursorline, no ruler, and the picker's focused row is
only distinguishable by its bold text. This is the same failure that
d80c98f025 ("Make color0 distinct from background/foreground and fix
helix theme", #5538) fixed back when themes defined color0 directly.
Point those scopes at `lighter_background`, the semantic key for a
surface one step off the background. Every first-party theme defines it
distinct from background except Last Horizon and Solitude, which
set the two equal on purpose; those, and legacy themes whose
`lighter_background` falls back to background, render exactly as they
do today.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Luke Hsiao <luke@hsiao.dev>
* Persist the Omarchy shell log across sessions
Quickshell only logs to its instance runtime dir on tmpfs, so when the
shell dies the idle/lock event trail is gone after a reboot (#6628).
Launch the shell through omarchy-launch-shell, which pipes stdout/stderr
into the journal under the omarchy-shell tag — bounded, timestamped, and
persistent — and surface that log in omarchy-debug-idle.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Recover a locked session whose lock client died
When the shell dies while the session is locked, Hyprland's failsafe
keeps the session locked with no lock client left, and
omarchy-restart-shell refused to run in exactly that state, leaving
reboot as the only way back in (#6628). Gate the refusal on the lock
service actually holding (or acquiring) the lock rather than on the
session's LOCK state — a dead shell and a crash-handler relaunch that
holds no lock both fail that check — then restart the shell, re-acquire
the session lock, and wait for it to report secure, the same
secure-poll omarchy-system-sleep-lock uses, so the user can
authenticate out of the failsafe. Enable Hyprland's
allow_session_lock_restore so the compositor accepts the replacement
lock client.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Give SSH commands the user-level tool paths
ssh host cmd runs neither a login nor an interactive shell, so on Arch it
gets the bare sshd PATH and can't find mise-managed tools like the agent
CLIs herdr scans for. Set PATH in the PAM environment (per-user via
@{HOME}), append the user-level dirs in env-bootstrap so login shells and
the uwsm session get them too, and source env-bootstrap before bashrc's
interactive guard for bash variants that read it non-interactively.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Don't let an empty PATH turn into a cwd entry
Appending with a bare "$PATH:" prefix leaves a leading colon when PATH
is unset, which shells treat as the current directory.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Fit the About window to its rendered content
The About fastfetch layout needs more columns than the shared 875x600
float provides, and the terminal's grid often only reaches its final
size after fastfetch has printed, leaving the output wrapped over the
logo or clipped at the initial 80-column grid (#6465).
Give About a dedicated org.omarchy.about app id so launch-or-focus can
actually match it, render through a loop that repaints on window size
or branding changes, and measure the rendered content to fit the window
around it with even padding, whatever the terminal font or About logo.
Fixes#6465
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Spacing
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Exporting BROWSER=omarchy-launch-browser into the whole uwsm session made
xdg-settings refuse "set default-web-browser", which broke every browser's
own "Set as default" button. The export only exists for terminal programs
(like gh) to open URLs detached from the terminal process tree, so move it
to default/bash/envs where interactive shells still pick it up.
Fixes#6590
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Extract the speed test gauge cluster into a shared SpeedTestOverlay
The dial cluster -- scrim, ignition sweep, self-ranging dials, run-again
button -- moves from the network speed test panel into qs.Ui with the
labels, unit, title, scale stops, and layer namespace as parameters, so
other measurements can wear the same cluster. The network panel keeps
its process handling and becomes a thin dressing of the overlay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add a disk speed test and move speed tests under Trigger > Tests
omarchy-disk-speedtest streams live write and read MB/s once a second by
sampling the backing block device's kernel I/O counters while dd workers
generate the traffic, the same way the network test samples the
interface counters. The stress data is an incompressible urandom chunk
staged in RAM, written with fdatasync per pass and fadvise drop-behind:
O_DIRECT silently falls back to the page cache on btrfs, and zeros never
reach a compressed filesystem at all. Scratch files are created
exclusively per invocation and removed even when a dismissal interrupts
the run mid-phase.
The omarchy.disk-speedtest panel dresses the shared SpeedTestOverlay
with write and read dials in MB/s, titled with the hardware model of
the disk under test.
The menu grows a Trigger > Tests submenu holding the new Disk Speed
Test and the Network Speed Test, which moves there from Setup > Network.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make the disk speed test reproducible, direct, and read-first
Successive runs could swing 40% because the settled figure was just the
last one-second sample of a single buffered dd stream, taken while btrfs
copy-on-write churned the extent allocator on every rewrite pass and the
fadvise cache-eviction dance stayed advisory.
The test files are now marked NOCOW, which is what makes O_DIRECT truly
direct on btrfs -- with checksums on it silently falls back to the page
cache -- and lets every rewrite land in place. Four parallel workers per
phase give the device a queue depth it can stretch out on, and the
figure the dial settles on is the steady-state average over the whole
phase with the first warm-up second excluded, not whatever rate the
final second happened to catch. Together this tightens successive runs
from +/-40% to a few percent of each other, at the device's actual
spec throughput.
The read phase now runs first, staged against freshly written files,
with the read dial on the left. Workers also only loop while the main
script lives, so a dismissal that loses the kill race can no longer
leave an orphan hammering the disk forever, and any worker dying before
the deadline fails the run instead of passing off partial figures.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the menu aliases from the speed test entries
Aliases are reserved for established alternate names users already
type, kept for compatibility -- not something new entries pick up by
default. Note that in the menu definition header and AGENTS.md so the
next entry doesn't repeat it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Group dial readouts with thousands separators
A gen5 disk reads five digits; 11,450 scans, 11450 doesn't. Uses the
locale's grouping separator.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Trim redundant overlay props and unused imports from the speed test panels
The network panel restated the overlay's default unit and scale stops,
and both panels carried imports and an omarchyPath property nothing
uses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Publish the specific speed test error whichever handler fires last
Process exit and stderr stream-finished have no guaranteed order, so a
failure that beat the collector showed the generic message forever even
when the command emitted an actionable one; the collector now replaces
it once the text lands. Also stop clearing the error on every stdout
line: only a new run should do that, or buffered output delivered after
a failed exit erases the failure message.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Arm the disk speed test cleanup before any scratch file exists
A preflight failure -- tmpfs target, missing device statistics, not
enough free space -- exited between mktemp and the trap, leaking the
scratch files. Cleanup also now unlinks before stopping the workers and
sweeps once more after, so even a cleanup cut short by an impatient
SIGKILL leaves no names behind and a final worker pass cannot recreate
one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The pacman configuration says nothing about debug symbol packages. Someone who
wants `glibc-debug` so that gdb or Valgrind has symbols to work with has to
discover on their own that Arch publishes `-debug` repositories, find a mirror
that serves them, and work out that the versions only line up while the system
tracks Arch current.
Appending the three repository sections to `pacman-edge.conf`, commented out,
will put them within reach without turning them on. The comment records that the
packages match the edge channel only, and that debuginfod already covers most
debugging on edge, so enabling them is often unnecessary. Only the edge template
gets them, because on stable and rc the upstream debug packages are newer than
the pinned packages they would need to match.
ref: https://github.com/basecamp/omarchy/discussions/6185
* Split the end-user omarchy skill into topic guides
Move default/omarchy-skill to default/agents/skills/omarchy and break the
monolithic SKILL.md into on-demand topic files for Hyprland config, shell
plugins, theming, and hooks. Update the skill symlink wiring, relink
existing installs through a migration, and correct claims that had drifted
from the implementation: plugin hot-reload, terminal reload, menu
customization, refresh scopes, theme overlays, background locations, hook
timing, and the packaged (not git-managed) system directory.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add capture and contributing guides to the omarchy skill
Cover screenshots, screen recording, OCR text capture, and LocalSend or
Taildrop sharing, plus how to route bug reports, suggestions, and support
questions upstream with diagnostics and captures of the problem attached.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Scope Hyprland reload guidance to the Lua config files
hyprsunset.conf and xdph.conf are read by separate processes, so hyprctl
neither applies nor validates them. Document restarting hyprsunset after
editing its config, including in the night light example.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Extract the Wi-Fi QR share card into its own omarchy.wifiqr panel plugin
omarchy-network-qr now leads with an iface/security/ssid meta line, so a
bare summon self-detects the connection and the plugin owns the whole
share flow. The network panel loses its overlay lifecycle: with no
centered card left inside it, the shadowed open/close collapses back to
the stock panel behavior, and the QR button just summons the plugin --
which a clone or third-party plugin can replace, like the speed test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep canceled QR and password runs from leaking into their replacements
Copilot review: the cancellation guards dropped in onExited while the
canceled run's collectors were still allowed to fire, so a stale stderr
could shadow a successful regeneration and a stale password could be
revealed under a new network's card. The guards now stay up until the
next run launches, good output settles any earlier error, and a bare
re-summon no longer inherits the previous card's SSID.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The network panel now summons it, so a clone or a third-party plugin
declaring clonedFrom: omarchy.speedtest can replace the whole speed
test -- dials and run orchestration alike -- for every caller.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Apply the terminal tag to Omarchy's own terminal windows
Omarchy launches TUIs and its own terminal windows under dedicated
app-ids (org.omarchy.btop, org.omarchy.terminal, TUI.float, ...), so the
class never matched the terminal that drew the window and those windows
went untagged.
Also drop the tag's opacity rule, which stripped default-opacity only to
re-apply the identical value. Themes still override through the tag.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Match terminals by tag for universal clipboard shortcuts
The binding kept its own list of terminal classes, so SUPER + C in a TUI
window sent CTRL + C instead of CTRL + Insert. Read the terminal tag
instead of duplicating the definition.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make omarchy-network-qr detect the connected Wi-Fi interface
The interface argument is now optional so IPC and menu callers can
summon the QR card without knowing the device name.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test into a modal card with cluster dials
The network panel's Run button and the new omarchy.network speedTest
IPC route open a centered card where download and upload dials sweep
on open and track the live readings, Tucson style. Dismissing the card
stops the traffic workers. The QR card gains a showQr IPC route.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add Setup > Network menu with DNS, QR Code, and Speed Test
DNS switches providers through omarchy-dns with the current choice
checked. QR Code only shows while connected over Wi-Fi.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Hold the speed test card steady and add a corner dismiss
The Run Again button now fades instead of unmounting so the card keeps
its size across runs, and a small X in the corner closes the card
alongside Esc and the scrim.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test action into the network panel hero
A speedometer icon beside the QR share replaces the dedicated inline
section, and the keyboard chain loses its speed stop accordingly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the speed test cluster on the scrim
Drop the bordered card and the pulsing halo: like the Tucson's floating
cluster, the dials now sit directly on a near-black scrim with a soft
under-glow along the value arc, fainter ticks, and hubless needles that
fade toward the pivot.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Center the retry button between the dials
The measuring status lines and the corner dismiss go away; the retry
button moves into the gap between the two dials like a cluster's center
display, anchored out of the column flow so nothing ever shifts. The
fast.com attribution lives on as its tooltip, and only errors still
print below the cluster.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Put the retry button back beneath the dial pair
The dials close ranks again and the retry button returns below them,
centered on the pair and still fading in place so nothing shifts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Harden the network IPC routes against stale panel state
The QR menu route forces interface self-detection instead of trusting
details that stop refreshing while the panel is closed, and the
widget's canonical close now tears down the centered cards and their
traffic instead of only hiding the compact panel.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Re-range the speed dials for every run
The scale latched upward forever, so one unusually fast run would
compress every later one for the lifetime of the shell process. Each
dial now returns to the base scale when its measurement starts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the Wi-Fi QR share like the speed test
Same presentation as the dials: no bordered card, just the code on a
heavy scrim. Only the dark modules paint now, so the white canvas can
round its corners while the spec quiet zone keeps the code clear.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pick the default-route device and pin the locale in QR detection
nmcli localizes state names, so the detection fallback pins LC_ALL=C
and accepts states like "connected (externally)". Detection now prefers
the default-route device, matching the connection the panel and the
menu's visibility gate describe when several Wi-Fi adapters are up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make every network summon path overlay-aware
Opening the widget while a centered card is up now dismisses the card
instead of raising the compact panel behind an exclusive overlay --
the shadowed open() covers the keybind toggle, the bar icon, and IPC.
Re-summoning a card while its process is still tearing down queues the
fresh request for onExited instead of dropping it, and the speed test
route refreshes connection details like the QR route does.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Shrink the overlays to fit narrow outputs
The dial cluster and the QR card scale down instead of clipping when a
portrait or heavily scaled display is narrower than their natural size.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
