* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Clock and daytime were near-duplicates with different click semantics
(clock toggles between formats on left-click and opens the timezone
selector on right-click; daytime was non-pressable with a hover tooltip).
Standardize on clock, since it's the more capable of the two.
- Delete widgets/daytime.qml and its FirstPartyWidgets entry.
- Migrate shell-defaults.json, shell.qml's builtin fallback, Bar.qml's
fallback bar config, and the settings panel's builtin defaults so the
center anchor and center-section entry both reference "clock".
- Rename the daytimeSettings form to clockSettings and rephrase
"Tooltip format" → "Alternate format (click to toggle)" so the field
label matches clock's actual behavior.
- Update the gallery dropdown options and bar/README docs.
Pass a section name to open the gallery with the cursor already on
that component instead of scrolling from the top. Useful when
iterating on a single widget.
omarchy dev ui-preview # default position
omarchy dev ui-preview button # land on the Button section
omarchy dev ui-preview button-group # land on ButtonGroup
omarchy dev ui-preview slider # land on Slider, etc.
The bin script forwards the argument as {"section": "..."} in the
shell summon payload. The gallery's open(payloadJson) parses it,
clamps against visibleSections (unknown names fall back to default),
and sets focusSection + selectedIndex inside the existing Qt.callLater
so the cursor's hasCursor bindings fire ensureCursorVisible
automatically.
Three small fixes around the new Button + ButtonGroup so the cursor is
always visible and the section reads as a single Button showing flag
combinations.
ButtonGroup now exposes cursorIndex + hovered(index, isHovered) so
panels can drive a single Button's hasCursor without reaching past
ButtonGroup's API. Every chip gets bordered: true so the row reads as
a real picker — distinct outlines, not just a tinted fill that vanishes
into the background.
Button's border treatment grows two paths so the cursor is always
visible regardless of other state: bordered + hot recolors the border
to the accent and thickens to the focus-ring width, and selected + hot
thickens the existing accent border to the focus-ring width (so the
cursor landing on the chosen option still reads as cursor presence,
instead of disappearing into the selected fill).
Gallery's Button section pairs each demo button with a small caption
('idle', 'active', 'icon only', 'icon + active', 'bordered +
focusable') so the row reads as one Button with its state flags side
by side rather than five unrelated buttons. The ButtonGroup section
gets the cursor wiring (cursorIndex + onHovered) plus an
onFocusedChanged auto-scroll so the cursor visual is reachable via
j/k h/l from the panel cursor model.
Wide content rows (slider rows in audio / monitor panels) opted out of
the cursor fill by setting fill: "transparent" on their CursorSurface,
which left them with no cursor visual at all — j/k landed there
silently with no way to know what was selected.
Add an `outline: bool` flag to CursorSurface. When true, hasCursor
paints an accent border (Style.focusBorderColor at
Style.focusBorderWidth) instead of a fill, leaving the row's chrome
fully visible underneath. Use for slider rows where a fill would
obscure the track.
Audio output / input slider rows and the monitor brightness row opt
in. The dev gallery's slider section replaces its bespoke Rectangle
wrapper with the same CursorSurface { outline: true }, so what the
gallery documents is what the panels ship.
The three components were three takes on the same shape \u2014 a clickable
rectangle with text/icon, a hot/hover state, an optional persistent
border, and an optional 'selected' or 'active' highlight. CursorPill
was a 30-line PillButton wrapper that added a hovered() signal;
ChoiceButton was effectively PillButton with selected: bool painting
an accent fill+border.
Collapse them into a single qs.Ui.Button. State flags compose
independently:
hasCursor / hover hot fill
active persistent foreground-tint fill
selected accent fill + accent border
bordered: true persistent 1px idle border (form primaries)
focusable: true Tab focus paints the accent ring
pressed pressed fill
The hovered(bool) signal is now built-in, so CursorPill's wrapper is
unnecessary. ButtonGroup wraps a Row+Repeater for the form-style
'pick one of N' pattern; panel-cursor-driven cases still compose
Buttons directly in a Row with per-instance hasCursor wiring.
Theme tokens move into a new [style] section in shell.toml:
border-width = 1
focus-border-width = 3
idle-border-alpha = 0.4
hot-fill-alpha = 0.08
selected-fill-alpha = 0.18
pressed-fill-alpha = 0.22
focus-fill-alpha = 0.22
Style.qml parses these out of the same shell.toml [font] / [bar]
already reads, and exposes pre-computed Style.hotFill / selectedFill /
pressedFill / idleBorderColor / selectedAccentFill / borderWidth +
the existing focusBorder* tokens. Themes that don't ship a [style]
section get the previous defaults unchanged.
Dev gallery consolidates three sections (PillButton, CursorPill,
ChoiceButton) into Button + ButtonGroup, with the cursor model
sections renamed accordingly.
Themes now drive typography the same way they drive colors: one [font]
base-size in shell.toml is the rem root, and every Style.font.<token>
(caption, bodySmall, body, subtitle, title, heading, display,
displayLarge, iconSmall, icon, iconLarge) derives from it via a fixed
multiplier. Themes can also pin individual tokens for stylistic
emphasis. base-size is clamped 11..13 until row-height tokens exist.
Bar dimensions move to the same singleton: [bar] size-horizontal /
size-vertical replace the hardcoded 26/28 in Bar.qml, exposed as
Style.bar.sizeHorizontal / sizeVertical.
Style.qml also resolves the fontconfig 'monospace' alias via fc-match
and exposes Style.font.resolvedFamily so panels can display the
concrete family. Watches ~/.config/fontconfig/fonts.conf so it tracks
'omarchy font set <name>'.
The qs.Ui kit (PillButton, Dropdown, Toggle, TextField, etc.) and
every first-party plugin (bar widgets, settings, menu, clipboard,
emoji, polkit, notifications, osd, image-picker, dev-gallery) now
bind to Style.font.* instead of pixel literals. Only three deliberate
display-scale outliers remain: the notification empty-state glyph and
the weather flyout's hero temperature pair, all commented.
Background plugin's applyTheme IPC fast-path also pushes shell.toml to
Style so theme swaps update typography and bar size without waiting
for inotify debounce.
Dev gallery (omarchy dev ui-preview) now ships a Typography section
that renders the full scale and theme tokens live, and its summon
command is fixed (omarchy-shell-ipc -> omarchy-shell).
