Previously, right-clicking the audio icon muted only the output. Whereas
the switch at the top of the panel mutes all audio (inputs and outputs).
Pairing the right-click to the switch seems a bit less confusing, and
also matches the behaviour with other panels (e.g. Bluetooth, Tailscale,
etc).
* Show OSD and sync touchpad steps when scrolling bar widgets
Scrolling the volume or brightness icon in the bar changed the value
directly without ever calling omarchy-osd, so only the keyboard media
keys showed the popup. On top of that, a touchpad's stream of many
small wheel events per finger-drag wasn't matched to a mouse's single
±120 notch per click, so touchpad scrolling felt uncoordinated and
uneven next to the keyboard/mouse behavior.
- shell/plugins/panels/audio/Panel.qml: accumulate raw wheel delta and
only apply a step once it crosses a full mouse-notch's worth, so
touchpad and mouse move the volume in identical 5% increments, and
ping the OSD each time a step actually lands.
- shell/plugins/panels/monitor/Panel.qml: same accumulator for
brightness, with a 5% floor so scrolling down can never blank the
screen.
- shell/plugins/osd/Osd.qml: animate the progress bar's width instead
of snapping, so successive steps glide smoothly.
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Fix bar wheel OSD behavior
* Normalize scaled wheel events
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
The hero switch is the panel's on/off, so it now carries output and input
together rather than output alone. It reads as on while anything is still
audible, which keeps muting a single channel from flipping the master switch.
Right-clicking a volume bar mutes just that channel -- output, input, or one
app's stream -- matching what the `m` key already does for the focused row.
Only channels that exist get a vote: a machine with no default source would
otherwise report its input unmuted forever, leaving the switch able to mute but
never to unmute.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Laptop speakers ship voiced by the vendor's Windows DSP layer, which Linux does
not get. A tuning restores that as a PipeWire filter-chain in front of the
internal speaker sink, matched to the machine by DMI string and expected sink.
Adding a laptop is a directory under default/audio/tunings with two files and no
new code: matching is data. The XPS 14 DA14260 tuning included here was derived by
measuring the xps-audio-linux EasyEffects profile (MIT) and fitting a biquad chain
to it, so no impulse response or other upstream asset is redistributed. It measures
1.24 dB RMS against that reference, and matches its dynamic range within 0.1 LU --
the reference's multiband compressor turned out to contribute nothing, so a linear
chain replaces it. Bass Q is capped deliberately: a closer magnitude fit swung
group delay 31 ms across 63-80 Hz, which smears bass transients.
The graph runs as its own PipeWire client under its own config name rather than
loading into the audio daemon. The daemon only reads its config at startup, so a
daemon-loaded tuning could only be switched by restarting PipeWire -- which drops
every PulseAudio client's connection, and applications that do not reconnect
(Spotify) then have to be restarted by hand. Hosting it separately also contains
failure, since a malformed tuning breaks only that service.
Three things about the surrounding audio graph needed fixing for this to behave:
- Volume must live downstream of the tuning. omarchy-audio-output-sink is now the
single definition of which sink an output's volume really uses, shared by the
volume keys, the output switcher's OSD and the audio panel, so they cannot
disagree. It resolves the current default output, which keeps it correct when
headphones are selected while a tuning exists.
- The tuning's own output is a movable sink input, so rerouting "all streams" to a
newly selected output would drag the processing onto headphones, or into the
tuning's own sink, which is a cycle. It is pinned, and stream moves are limited
to streams carrying an application.name.
- The physical sink a tuning fronts is not independently selectable, since picking
it would only bypass the tuning, so it is kept out of the output list.
Applying happens at first-run, not finalize-user, because finalize-user also runs
in the ISO chroot where there is no audio server and nothing would retry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The bar-null-shell-null-typeof-function ternary guarded against our own
shell missing a method it always defines. bar?.shell?.firstPartyServiceFor()
handles the only real case, delayed bar injection, in one line. The
typeof checks that probe genuinely third-party plugin objects stay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Each panel's hero on/off toggle (Tailscale, Dropbox Wi-Fi, Bluetooth,
network, audio mute) now has a reachable "header" cursor section, a focus
ring around the hero icon, Enter/Space activation, a letter shortcut, and
hover parity. The hero is inset by heroRingPad so the ring stays inside
the Flickable/ScrollView clip box instead of being cut off.
Bluetooth and audio get a virtual "header" section above their device
sections, so the adapter/mute can be toggled by keyboard even when no
device rows exist. Network repurposes its previously dead header section.
For the PanelHero-based panels (Tailscale, Dropbox), route panel state
through the wrapper's `header` id: inside a PanelHero iconComponent `root`
resolves to PanelHero, not the Panel, so `root.headerHasCursor` and
`root.setHeaderCursor()` silently referenced the wrong object.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
