* Give scratchpad a Quake-style presentation
* Keep the Quake scratchpad from restyling every window
The presentation was bought with global decoration defaults: rounding went
0 -> 5 and both shadow and blur were switched back on for every window on
the system, undoing 935283c8. Blur in particular is close to invisible
here, since every window is already tagged 0.985/0.96 opacity and no layer
rule asks for it, so it was GPU load on every frame for almost nothing.
Put the globals back and scope the rounding to the scratchpad with a window
rule, the same way popped windows already get theirs. The inset, dim_special
and the slide carry the effect on their own. dim_special only applies while
a special workspace is open, so it stays.
Also drop the four workspace-rule booleans that only restated Hyprland's
defaults, fold the stale scratchpad rows in the hotkey table into the new
ones, and give the binding assertions their own fixture instead of borrowing
the bar-panel one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Omabot <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Launch claude and codex agents with auto-review instead of full bypass
Claude's auto permission mode and codex's --approve-for-me both run
unattended without prompting, but keep automatic review (and codex's
workspace-write sandbox) instead of skipping approval entirely. Grok
stays on bypassPermissions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Match the bash aliases to the agent launcher's auto-review modes
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
omarchy-plugin-clone only takes the source id as the first argument, but the
menu passed --edit ahead of it, so the id fell through to the unknown-option
branch and every clone from Setup > Plugins failed.
Closes#6913
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Bar widgets propagate their composed press-and-hold down to the center gesture
area without handing over the grab, so the gesture area started a bar move and
then received neither a release nor a cancel to end it. The move ghost stayed on
screen for the rest of the session. Ignore the gesture unless we hold the press.
Closes#6881
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
mise use -g announces the resolved tool on stdout, so every wrapped command
prepended a "tools:" line to its own output. That corrupts anything speaking a
protocol over stdout, such as codex app-server. Pass --quiet, which keeps errors
on stderr and preserves the exit status.
The obsolete-wrapper check in the agent migration matched the generated command
verbatim, so loosen it to match the package instead of the flags.
Closes#6908
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Install rows hid themselves with `when:"! <present>"`, so software you
already had vanished from the very list it was installed from. Add a
`disabled:` guard that keeps a row listed but dim, ✓-marked, unselectable
and out of search, and move every Install row onto it.
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Install missing apps when choosing defaults
* Restore Chromium through browser installer
* Trust default app installer status
* Use full conditionals for install paths
* Restore preinstalls from the menu, and drop the Omacom apps with them
Remove Preinstalls missed omacut, omacalc, and omawrite, so the three Omacom
apps survived an opt-out that was supposed to clear the desk.
Opting out was also one-way. Install > Preinstalls now puts everything back:
the shipped .desktop launchers and mise stubs via omarchy-refresh-applications,
the dropped packages via pacman, and the opt-out marker deleted so the
preinstalled keybindings return on reload. The two menu entries guard on the
marker, so exactly one of them is ever visible.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Trim the preinstall lists to what quattro actually ships
Remove Preinstalls was still dropping typora, spotify, 1password, 1password-cli,
signal-desktop, opencode, claude-code, and github-cli. None of those are in
omarchy-base.packages anymore: typora gave way to omawrite, the services moved
to on-demand menu installs, and the agent CLIs are mise-managed. Removing them
took out apps the user had deliberately installed, and restoring them would have
put back what we no longer ship.
Both lists are now the same twelve packages, all of them in omarchy-base.packages.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Keep the opt-out marker when a restore fails
omarchy-pkg-add exits non-zero when pacman cannot install a package, but the
restore ran straight past it, cleared the marker, and reloaded Hyprland. That
reported success and brought back keybindings for apps that never arrived. The
marker now falls last, behind a check on the transaction.
The new test also pins the two lists to each other and to omarchy-base.packages,
which is the drift that let retired packages linger in the removal list.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Pacman answers its own conflict question with No under --noconfirm, so one
retired package can stop every update after it. Which package to drop is a
decision rather than a cleanup, so run the upgrade again with pacman asking
when there is a terminal to answer on, and report instead when -y promised
not to ask.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The migration asked a user to close every running browser before repairing
the Copy URL shortcut, but a browser only ever rewrites its own Preferences
on exit. Waiting on all browsers deadlocks `omarchy update` for anyone whose
main browser is effectively never closed: the pending ghosts commonly sit in
a stale profile nobody has open, yet the migration blocks on the always-open
browser until the prompt is declined, failing the whole update.
A running Chromium-family browser holds a SingletonLock (and socket) inside
its user-data-dir, so whether the profile being repaired is open is
mechanical. Gate on that instead of on the sheer presence of a browser
process — the repair proceeds where the affected profile is closed, and
browsers attached to other profiles no longer hold the update hostage.
The gate stays conservative while an affected profile actually is open, and
the existing post-repair verification still catches a browser that starts
mid-repair and restores stale Preferences on exit.
The migration test now simulates an open profile with its SingletonLock
instead of a pgrep stub; every prior scenario still passes.
LocalSend registers an Ayatana item with no ItemIsMenu and no Activate
handler, so its primary click is a silent no-op and the menu offers only
Open and Quit. Share > Receive already opens it, so drop the item the way
Dropbox's is dropped when its dedicated widget owns the surface.
Closes#6838
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
gum draws its confirm UI on stderr, so the migration's `2>/dev/null` threw
away the whole prompt while gum still held the terminal in raw mode reading
keys. With a browser open, an update stopped after "Running migration
(1786643346)" on an unpainted screen with no way to tell it was waiting for
an answer.
Nothing else in the repo suppresses gum's stderr; the redirect only ever hid
gum's own error in the no-terminal case, where the migration already explains
itself on stderr before deferring.
Fixes#6841
Claude-Session: https://claude.ai/code/session_01So4yKzTDdJJp7orjnF8i1J
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Rebind ghost Copy URL shortcut registrations to the pinned id
Chromium never hands a suggested shortcut to one extension while
another — even a long-gone one — still holds the registration. Profiles
that first loaded Copy URL before its id was pinned registered
Alt+Shift+L under an id derived from the extension's load path at the
time, so the pinned extension never receives the shortcut and the
keypress does nothing (#6816).
The quattro upgrade tried to repair this against one hardcoded
path-derived id, which only ever matched a single home directory. The
historical ids are unknowable in general — they hash long-gone absolute
paths through whatever symlinks existed then — but the registration
itself names the command, so a migration now rebinds any copy-url
command that points away from the pinned id, unless that id belongs to
an extension that is actually installed or the pinned extension already
holds a binding of its own.
Browsers rewrite Preferences on exit, which reverts any repair made
while one runs, so the migration asks for this user's browser windows to
be closed first — failing and staying pending when there is no terminal
to ask in or the prompt is declined. The backup a repair leaves behind
marks it as attempted but unverified: until a browser-free run confirms
the registration stayed repaired, the migration keeps itself pending
rather than trusting a disk state an open browser may still overwrite.
The upgrade-time repair is dropped: the upgrade already runs migrations,
so the migration is the single implementation.
Fixes#6816
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pin the WhatsApp Slim extension id
Keyless unpacked extensions get path-derived ids, which go stale if the
load path or packaging ever changes — the same class of bug that broke
the Copy URL shortcut for pre-package installs. Pin the id with a
manifest key like the other bundled extensions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Crash capture stays on by default, but Trigger > Toggle > Crash Capture (or
`omarchy toggle crash-capture`) now turns the watcher off. The toggle writes the
usual flag file and stops the unit for this session; the unit checks the same
flag with ConditionPathExists, so the choice survives a logout without the unit
having to be disabled.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The blank timer was gated on `authenticating`, which is
`authenticatingPassword || fingerprintAuthenticating`. The fingerprint
PAM sits armed for the entire lock waiting for a finger, so on any
machine with a reader enrolled the gate is true from lock until unlock:
the timer is stopped when the lock begins and never re-armed, and the
display stays lit indefinitely.
Gate on `authenticatingPassword` instead. A password check in flight
still holds the display up, and the passive fingerprint wait no longer
does.
Claude-Session: https://claude.ai/code/session_01EDpyC9793TKZBS2jXUNECG
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Fix notification focus for agent terminals
* Restrict notification title fallback to agents
* Simplify the focus fallback to a lazy two-tier query
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Keep AppLibrary scans out of login shells
A login shell sources the user's profile, and tools like mise touch
~/.local/share on activation. Quickshell's desktop-entry watcher monitors
that tree, so every scan retriggered another scan: a self-sustaining loop
that pinned ~20% of a core at idle. The scans only use bash builtins,
find, and sort, so they don't need the login environment.
Fixes#6806
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pin the AppLibrary scans to non-login shells in tests
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Persist notification images so history keeps avatars
Persisted popup and history entries stored image/appIcon as URLs into
resources that die with the live notification: Chromium-family senders
(every Omarchy web app, WhatsApp included) pass avatars as files in a
scoped /tmp dir deleted when the notification closes, and raw image-data
hints surface as in-process image:// URLs that die with the server
object. Replaying history then found dead references and hid the icon.
Copy file-backed images into the notification state dir when persisting,
keyed by the entry's file stem, and reference the copies from the JSON.
Blank dead image:// URLs so the card falls back to the app icon. The
copies die with their JSON: superseded-popup deletes, history trims and
clears remove them, and a startup sweep collects copies orphaned by a
restart killing a queued job mid-write.
Hold DND-silenced notifications open until their history write has run,
since untracking tells the sender to delete its avatar file, and carry
replayed on-screen rows over via their persisted copies, since the
replay dismisses their live notifications first.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Coalesce silenced updates and bound image copies through temp files
A replaces_id update lands on a held DND notification without a second
onNotification, so releasing after the first write could persist a stale
snapshot. Re-snapshot when the write completes and write again until the
content is stable, reusing the original file identity.
The image copy reopened the sender-controlled path after checking it, so
a file growing or becoming a FIFO mid-copy defeated the size bound. Read
through head -c under a timeout into a temp file, validate its size, and
rename it into place; the startup sweep clears temp files a killed job
leaves behind.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* perf(agents): cut codex usage collector memory with SQL filter and cache
The codex collector scanned every row of opencode.db (1.7 GB, 55k+ rows)
with Python-side json.loads, peaking around 716 MB of RSS on every run
-- including the panel's refreshLimits() call, which passed --limits-only
that the collector silently ignored.
Filter rows in SQL (LIKE gates + json_valid + json_extract authority,
mirroring the old Python filter semantics) so giant blobs are never
parsed, and cache the local stats scan in XDG_CACHE_HOME following the
claude collector's pattern (atomic writes, flock, schemaVersion).
--force rescans, --limits-only and normal mode reuse a fresh cache and
fall back to a full scan when it is missing, stale, or corrupt.
Measured: cold scan 716 MB -> 158 MB peak; warm --limits-only ~85 MB
and ~1.4 s. Output record schema and values are unchanged for the same
data (parity verified against the old filter, including malformed rows).
* Scope the codex scan cache's 15-minute reuse to --limits-only
A no-flag run is the widget's periodic refresh, and refreshIntervalSec is
configurable down to 30 seconds; holding every mode to a 15-minute cache
meant stats could lag far behind the interval the user asked for. Mirror
the claude collector: normal runs reuse a scan for ~20 seconds purely to
dedup concurrent collectors, and only --limits-only, which promises just
fresh limits, may reuse a scan for up to 15 minutes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Invalidate the codex scan cache across day boundaries
The cached stats embed date-dependent fields (todayPrompts,
todayTotalTokens, recentDays), but only the file's age was checked, so a
cache written at 23:58 served yesterday's numbers as "today" for up to
15 minutes past midnight. Stamp the envelope with the scan's local date
and treat any other date as a miss.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Reject codex scan caches with a future mtime
A cache whose mtime is ahead of the clock has a negative age, which the
freshness check accepted forever: setting the clock backwards froze the
stats until real time caught up with the file. Require a non-negative
age before trusting the cache.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Never cache an interrupted opencode scan
A transient lock, schema migration, or corrupted database aborts the
opencode scan mid-flight; the partial numbers still serve the current
run, but persisting them let a single bad read suppress opencode usage
for every cache reader until expiry. The claude collector already skips
its opencode cache write on a database error; do the same here.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make the json_valid guard order explicit in the opencode query
The query relied on json_valid(data) evaluating before json_extract(),
but SQLite does not promise that AND terms run left to right; a
reordered plan would let json_extract raise on a malformed row and
silently truncate the scan. Wrap each json_extract in a CASE so the
guard is structural rather than positional.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop a claude-collector comment that is false for codex
"These caches were world-readable before" was copied from the claude
collector; codex had no caches before this one existed. Explain the
chmod on its own terms.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: markbusking <marcosbustos.dev@gmail.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
omarchy-hw-hybrid-gpu gates the Hybrid GPU menu entry, and it queried
supergfxctl unbounded — a wedged supergfxd stalled menu rendering
forever. Bound the query with the same TERM-then-KILL escalation the
toggle uses, and treat a daemon that cannot answer like a machine
without supergfxctl: fall back to counting GPUs rather than hiding
hardware that is really there. An ordinary supergfxctl failure still
hides the entry.
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Only offer video capture devices as webcams
V4L2 exposes raw processing and output-only nodes beside usable cameras. The webcam picker and automatic recorder selection treated the first /dev/video node as a camera, so IPU6 laptops opened a black overlay instead of their loopback capture device.\n\nShare one device lister across detection, selection, and recording, and keep only groups whose first video node advertises Video Capture in Device Caps. Cover raw IPU nodes, ordinary capture devices, and capture-less systems.
* Fall through to a later capture-capable node in a webcam group
A group whose first video node is not capture-capable vanished entirely,
even when a later node in the same group could capture. Probe each node
until one qualifies, still emitting at most one device per group. Also
exit zero explicitly: a trailing filtered device used to leak the failed
capability check as the script's exit status.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Bound hybrid GPU mode queries
* Test blocked hybrid GPU queries
* Give the blocked-client test headroom over its 12s of kill cycles
The third case spends ~12s of real TERM/KILL escalation against its own
15s watchdog, which can tip to a spurious 124 on a loaded machine. Also
drop the TEST_LOG plumbing no stub ever wrote.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The interval floor was applied with max(), so the zero that --force
picked could never win: max(0, 15) is 15. Forcing a refresh within
fifteen seconds of the last probe silently served the cache instead,
though --force documents itself as ignoring them.
The window exists to absorb a panel opened and shut repeatedly, which
arrives as --limits-only. --force is a person pressing refresh, and it
should outrank a window meant for flicks.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop closed network panels from leaving Wi-Fi scanning enabled
refresh() defaults scanWifi to false and its no-scan branch enabled the
scanner unconditionally. Five paths reach it with no panel on screen —
Component.onCompleted, clearNetworkAction(), failNetworkAction(), the
band-change actionProc exit, and the 30s actionTimeout — so the scanner
stayed on and Quickshell kept re-arming RequestScan behind a closed panel.
scanRestart had the mirror gap: it enabled the scanner 100ms after
refresh(true) without re-checking that the panel was still open.
Every sweep takes the radio off the operating channel, so this degraded
the link it was scanning from: one sweep every 17s, gateway RTT rising
from ~2ms to repeated 150ms+ spikes on an otherwise idle connection.
Gate the scanner block on the panel being open, cancel a pending restart
on close and re-check the panel when it fires, and track the WifiDevice
this instance enabled so close, device replacement and destruction
release the right object. Destruction matters on its own: a bar reload
with the panel open would otherwise die with opened still true and never
write scannerEnabled = false.
* Cover the scanner ownership helper's own invariants
The previous assertion only pinned that no write bypasses
setScannerEnabled(); it said nothing about what the helper does. Dropping
either the opened gate or the release-before-adopt from the helper still
passed, while a closed instance could reclaim scanning and a device swap
could leave the previous interface scanning.
Run the helper's actual JavaScript against stand-in devices instead,
following the extract-and-eval pattern the agents panel tests already use.
Removing either invariant now fails its own assertion.
Only the Claude Code CLI can refresh the OAuth token it saves; the
collector just reads it. A machine left alone long enough finds the
token lapsed, and that branch returned an empty limits list with no
status text at all, so the panel hid its whole limits section and
explained nothing.
Say what is wrong, and fall back to the cached limits already on disk
rather than discarding them. Cached windows are kept only until they
reset: a percentage from a window that has rolled over describes a
period that is over, and pinning a stale 78% on an allowance that is
now untouched would be worse than showing nothing. The probe-failure
path gets the same filtering for the same reason.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Drop the kms hook when the proprietary NVIDIA driver handles early KMS
install/hardware/nvidia.sh early-loads nvidia_drm (modeset=1) for early KMS,
but HOOKS still carried the kms hook, so autodetect pulled nouveau and
~100 MB of its GSP firmware into every initramfs for a driver that never
runs. On a Limine UKI setup that meant a 256 MB image where ~144 MB is
normal, doubled again by the fallback history on /boot.
Filter kms out of HOOKS when nvidia_drm is in MODULES (nvidia.conf sorts
before this drop-in) and every PCI display controller is NVIDIA. Hybrid
systems keep kms so the iGPU retains early KMS at the LUKS prompt.
Verified on an RTX 4090 (nvidia-open-dkms 610.57.04): UKI shrinks
256,183,296 -> 144,066,048 bytes, nouveau and its firmware gone, the
nvidia-utils GSP blobs and all four nvidia modules retained, Plymouth
still owns the LUKS prompt via nvidia_drm.
Fixes#6790
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Address review: quote literals, harden PCI detection, add shell tests
Quote fixed string literals in the [[ ]] comparisons per AGENTS.md, and
read the PCI tree through OMARCHY_PCI_DEVICES_PATH, the same seam
bin/omarchy-hw-nvidia already uses.
Require a positively identified NVIDIA display controller before dropping
kms: an empty or unreadable PCI tree previously counted as "no non-NVIDIA
GPU" and would have dropped the hook. Unexpected trees now keep kms.
Cover the conditional in test/shell.d/nvidia-kms-hook-test.sh: nvidia-only,
hybrid, no nvidia_drm, MODULES unset under set -u, audio-function-only,
empty tree, and a device directory missing its sysfs attributes.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Treat unreadable PCI devices as inconclusive and make the test hermetic
A device whose class/vendor attributes cannot be read could be another
GPU, so skipping it let a readable NVIDIA GPU beside it drop kms without
having verified the whole tree. Count it as a non-NVIDIA sighting so kms
stays, and cover the mixed case in the test.
The test also sourced the host's /etc/vconsole.conf under set -u, where a
valid KEYMAP-only file makes the XKBLAYOUT expansion fail in the subshell
and ties the result to the machine running it. Predefine XKBLAYOUT and
FILES before sourcing the config.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Rebuild existing initramfses once the kms hook no longer applies
The settings package deploys the new omarchy_hooks.conf conditional, but
nothing rebuilds the initramfs when only a mkinitcpio drop-in changes, so
existing NVIDIA-only installs would carry nouveau's ~100 MB of GSP
firmware until their next kernel update. Following the precedent of
1784476564, add a migration that rebuilds via limine-mkinitcpio — once
per machine, and only where evaluating the installed drop-ins shows the
conditional actually dropped kms, so hybrid machines, non-NVIDIA
machines, and user-edited configs are left alone.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Document the mid-sourcing MODULES caveat in the kms conditional
A later-sorting drop-in that resets MODULES outright (as
surface_device_modules.conf does) would strip nvidia_drm after kms was
already dropped. Every machine Omarchy writes such a file for is hybrid
Intel and keeps kms through the PCI scan, but that is worth stating so
the invariant is not broken by accident.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
The discovery retry timer turned adapter.discovering on every second
while the panel was open, and nothing ever turned it off. The BlueZ
discovery session behind it is held by quickshell's D-Bus connection,
so one visit to the panel left the radio in inquiry until the next
shell restart — continuously starving A2DP audio on the same controller
into stuttering, and 'bluetoothctl show' kept reporting
'Discovering: yes' long after the panel was gone.
The panel now tracks the StopDiscovery it owes BlueZ and settles it
once closed. A timer bound to the confirmed discovery state does the
stopping, rather than a write in the close handler: quickshell only
forwards a discovering write that differs from the last state BlueZ
reported, so a stop issued while a just-fired StartDiscovery is still
awaiting confirmation would be swallowed and leak the session. Binding
to adapter.discovering re-arms the stop whenever the confirmation
lands, a reopen inside the first interval keeps the scan running
uninterrupted, and attempts are bounded so a session another BlueZ
client holds up cannot draw StopDiscovery calls forever.
One widget instance exists per monitor and they all share the default
adapter — the same shared-backend shape the network panel's wifi
scanner fix (#6772) dealt with — so the debt follows the session: an
instance opening onto a running scan adopts it, a closing instance
hands it to a panel still open on another monitor (the popout handoff
closes one instance as it opens the next), and a destroyed instance
passes it to a surviving sibling.
Fixes#6789
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Recover image picker after interrupted thumbnails
* Use arithmetic assertions in image cache tests
* Bound thumbnail lock waits and reap partial thumbnails
A hung generator (vips stuck on a corrupt file or slow mount) held its
flock forever, wedging every later picker open; the directory-lock era
capped that wait at 30 seconds, so keep the same bound. A generator
killed mid-write also stranded its partial .jpg.<pid>.jpg forever, since
nothing prunes the cache directory; only the lock holder writes those,
so reap them right after taking the lock.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Harden thumbnail locks and cache publication against races
Adversarial review caught three holes. The lock fd leaked into
vipsthumbnail, so an orphaned or hung vips kept holding the lock after
its shell died; close it for the child. Reaping legacy lock directories
unconditionally raced a still-running legacy generator through an
upgrade; only reap ones older than the longest plausible generation.
And cache publication was neither atomic nor exclusive, so a picker
killed mid-write, or two interleaving, could leave truncated or
mismatched rows behind signatures that still validated - the same
permanent hiding this branch set out to fix; publish via renames under
a per-key lock, rows first.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix `--help` being skipped for bin routes that only partially resolve to a file
* Add regression tests for --help on partially resolved routes
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Stop help-flag scanning at -- and match --json as an exact token
A `--` marks the rest of the args as belonging to the command itself, so
neither --help nor --json past it should be treated as router flags. The
--json check also matched substrings of flattened args, so a --json inside
one quoted argument switched --help output to JSON.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The floating rule pinned every agent terminal to 1200x800, which
overflows small and scaled displays: window rules see logical pixels, so
a 2560x1440 monitor at scale 1.6 is only 1600x900 and the window covered
89% of its height. Tiling drops the fixed size along with the rule, and
the shared app-id still earns the terminal tag from terminals.lua.
* Offer an AI diagnosis when a process crashes
systemd-coredump journals every core dump under a known MESSAGE_ID with the
crashing program, pid, and signal as structured fields. omarchy-crash-watch
follows that stream and raises a "Process crashed: <program>" toast; clicking it
opens omarchy-agent-crash, which briefs the default agent on the crash.
The toast goes through omarchy-notification-send --exec rather than a libnotify
action, because the shell runs clicks from its own omarchy-exec hint and never
emits ActionInvoked. It keeps the default "omarchy-action" app name too, the
only one shouldBypassDnd() lets through -- a crash being the last notification
worth swallowing. It stays quiet until an agent is configured, since a
diagnosis is all it offers.
The method lives in a diagnose-crash skill rather than the prompt, so it is
edited in one place and works with whichever agent is default. It covers
investigating the core, and reporting a confirmed Omarchy bug upstream: scoped
to bugs Omarchy controls, searched for duplicates first, only with the user's
agreement, and signed with the model and harness that produced it.
A migration reaches existing installs, whose skill symlinks and unit enablement
would otherwise sit behind one-time setup paths.
* Let the diagnosis clean up the core it extracted
"Do not modify or delete anything" contradicted the symbolization step right
above it, which writes a core to a temp file and deletes it on exit. Read
literally, the core survives -- and the same section warns it holds passwords
and tokens. The prohibition is about the system, not about your own scratch.
* Do not spend a crash toast on a dead notification server
The shell owns org.freedesktop.Notifications, so its own crash takes the
notification server down with it -- and a shell crash is exactly what you want
told about. The toast was sent once into that gap and the dedupe window was
recorded regardless, so the rest of the crash loop went quiet for a minute and
`journalctl -n 0` never replays what was missed.
It now waits for the restarted shell to reclaim the bus name, as
omarchy-migrate-notify already does, and only a delivered toast starts the
dedupe window.
* Reshape the agent launcher into omarchy agent
omarchy-launch-agent becomes omarchy-agent, with prompts on omarchy-agent-prompt
rather than the bare route: `omarchy agent` is both a command and a group, so a
positional prompt there would shadow any subcommand under it. The launcher takes
flags only and points at `omarchy agent prompt` when handed one.
Every agent window now launches under a fixed org.omarchy.agent app-id instead of
omarchy-launch-tui's default of org.omarchy.<binary>, so one rule floats them all
whichever agent is default.
Omarchy also stops picking an agent for you. omarchy-default-agent prints nothing
until one is chosen, leaving every entry under Setup > Defaults > Agent unchecked,
and a first-run invitation offers to take you there.
* Wordsmith
* Cover the agent routes and the invitation
The route split is the point of the change, so exercise `omarchy agent`,
`omarchy agent prompt`, and a rejected positional prompt through the router
rather than only the binaries behind them.
The invitation gets the same treatment as the Voxtype and fingerprint ones: it
notifies once, opens the agent defaults menu, and leaves both the notification
and the marker alone for anyone who already chose an agent.
* Offer the agent choice from the keybinding
Super + Shift + Ctrl + A now runs `omarchy-agent --pick`, which opens Setup >
Defaults > Agent when nothing is chosen yet. A keypress that writes to stderr
and opens nothing just looks broken.
* Reach existing installs with the agent invitation
first-run installs the invitation hook, and existing accounts marked it complete
long ago, so they would never see it -- while being the accounts most likely to
need it, since the old getter returned opencode implicitly and most have no
agent recorded at all. Post-update hooks run later in the same update, so the
invitation arrives without waiting for another one.
* Say what the Defaults submenus set
Setup > Defaults lists Agent, Browser, Terminal, Editor, but the header inside
each repeated the same bare word, which reads as a category rather than a
setting -- and says nothing at all when the menu is summoned straight into it.
The list keeps its short labels; the headers now name the setting.
Standing in for an abandoned compositor means binding a Unix socket, and the
sandboxes this guard exists for are the ones that deny it: the fixture raised
PermissionError and took the whole file down with set -e, adding a failure in
the environment the guard was written to keep clean. Run the cases that need no
socket first and skip the rest when one cannot be bound.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Read the keyboard being typed on rather than the one holding main
The main flag names no keyboard for long. fcitx5 takes it with the
virtual keyboard it binds to inject, and those are filtered out, so on a
seat running an input method the pick lands on nothing at all: no label,
and the widget hides itself off the bar. #6727 keeps polling in that
state rather than settling it, and the poll has nothing new to read.
Once fcitx5 unbinds, the flag lands on whichever device libinput listed
last, as easily a lid switch as a keyboard, and a device that never
receives the toggle reports the layout it started on forever, which is
the reading #6574 opened.
Every device carries the seat's layout list, but only the keyboard being
typed on advances through it, so read the furthest-advanced one.
activelayout names the keyboard it moved ahead of the layout, so take
that name and let it settle the pick, and the click that switches it.
* Leave the buttons out of the seat the widget reads
Reading the keyboard being typed on left keyboardName standing for two
things at once: the device a click switches, and the device activelayout
last named. Only the second was still being set, so the first went empty
until a switch happened -- which left the click doing nothing on a seat
whose only switch is the click, and left the poll running forever on the
one-keyboard install it was written to leave alone. Give each its own
property, and set the switch target from the reading that confirmed the
keyboard is there.
Layout progress only points at the keyboard being typed on while the
other devices stay where they started, and the ACPI power button, lid
switch and sleep key never do move on their own -- but they answer to
switchxkblayout and can hold the main flag, so anything that reads or
switches whatever the seat hands back can end up describing a button, and
unplugging the keyboard beside one leaves it standing in for the seat.
Drop them where the virtual keyboards are already dropped.
A reading that reaches hyprctl and finds no keyboard now clears the label
rather than leaving a device that is gone described on the bar, told
apart from the empty output a killed query leaves by the device list
itself, and the watchdog asks again rather than waiting for a poll that a
settled seat has already stopped.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* Skip shell tests when the compositor can't be reached, not just when WAYLAND_DISPLAY is unset
A set variable only proves the environment was inherited. Sandboxes pass it
through while blocking $XDG_RUNTIME_DIR, so Quickshell cleared the guard and
aborted inside QGuiApplication, leaving two core dumps per launch instead of a
clean skip. Probe the socket and, when there's a signature to ask with,
Hyprland itself. Disable core dumps on the way through for the compositor that
dies mid-run, which no probe can catch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Retry the compositor query before calling it dead
Hyprland can miss a query while it reconfigures outputs, and one miss was enough
to skip a whole file's runtime coverage. Retry the way omarchy-launch-shell
does. Only a leftover socket reaches the query at all, so the ordinary skip
still returns immediately.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Quickshell watches the QML it loaded and reloads on change, so pacman
replacing /usr/share/omarchy/shell mid-transaction makes the running
shell reload against a half-written tree. That reload fails, and a
failure that reaches the config load is not harmless: it raises the
reload popup, which is a second engine generation.
EngineGeneration::currentGeneration() returns null unless exactly one
exists, so the IPC kill that omarchy-update sends moments later takes
the QCoreApplication::exit(0) branch instead of the generation's own
quit, and Quickshell tears the QML graph down after deleting the
QGuiApplication. The first GUI resource touched on the way out aborts:
FATAL: QPixmap: Must construct a QGuiApplication before a QPixmap
The user gets the crash dialog after an update and a coredump per
occurrence. Reported in #6748 with 3 crashes across 10 updates, always
following a failed reload.
Fixing this in omarchy-update — stopping the shell around the pacman
step — would cover one caller and cost the polkit agent and the
notification server for the length of the transaction, which the
migrations that run next still notify through. It would also have to
carry omarchy-restart-shell's refusal to restart a locked session, or
reintroduce the hazard that refusal exists for.
And omarchy-update is not the only thing that rewrites the tree. The
pacman guard turns away a bare pacman -Syu, but nothing turns away a
targeted pacman -S omarchy, a pacman -U of a locally built package, the
documented OMARCHY_ALLOW_DIRECT_PACMAN bypass, omarchy-dev-pkg-test, or
a checkout in a dev-linked tree.
Turn the watcher off instead. Omarchy has never reloaded through it:
omarchy-restart-shell is what picks up QML changes, and config and
plugin changes go through the shell's own IPC. Third-party plugin hot
reload is PluginRegistry's own inotifywait and FileView watches its own
files, neither of which this touches — QuickshellSettings::watchFiles()
gates the config scanner and nothing else. The popup goes off with it,
because QML can still ask for a reload directly and leave the same
extra generation behind.
Environment reaches Quickshell only at launch, so the update that
delivers this still runs under a watching shell. It takes effect from
the next one.
Verified against an isolated instance: breaking a config in place and
then sending the IPC kill reproduces the FATAL, and it stops with either
variable set. QS_DISABLE_FILE_WATCHER also keeps the failed reload from
happening at all.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The vendor-ID guess rejects any device with a driver bound, on the
reasoning that libfprint drives readers from userspace so a real one sits
there unbound. But libusb claims interfaces through a synthetic usbfs
driver, so the reader binds one for as long as fprintd holds the claim —
which is exactly while it is being enrolled or verified against.
Readers that name themselves take the product-string branch and never
reach this, so the exposure is the ones that don't: Goodix 27c6:6594
reports "Goodix USB2.0 MISC", matches on vendor ID alone, and drops out
of detection mid-authentication. The menu entry disappears and the
first-run invitation stops firing while the reader is in use.
Ignore a driver link that resolves to usbfs, and keep rejecting the real
ones — usbio-bridge, usbhid, uvcvideo — including on a device that has
both.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Restore FPC fingerprint detection
* Anchor the FPC product match to a prefix
*fpc* is an unanchored three-letter token on the one branch that is
trusted outright, with none of the kernel-driver checking the vendor
guess gets. Every FPC reader on record leads with it — "FPC Sensor
Controller", "FPC Sensor Controller L:0002 FW:25.26.23.14", and this
branch's "FPC L:0000 FW:1425046" — so requiring the prefix costs no
coverage while keeping three letters from matching mid-string, where
FPC abbreviates unrelated things like flexible printed circuit.
Also restore the note about why Elan is kept out of the vendor list, so
the two signatures read as the same deliberate exception.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Write no product descriptor for a two-field device spec
${remainder#*:} returns the string unchanged when there is no second
colon, so a spec meant to describe a device with no product descriptor
wrote the product id out as its product string instead. Every call site
happened to pass a trailing colon, so the suite was right by accident.
Guard the split and drop the trailing colons, so the two vendor-match
cases exercise the path they were written for.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Bind a named driver in the kernel-driver fixture
Touching a bare `driver` file asserts that any driver at all disqualifies
a vendor guess, which is more than the detector should promise: libusb
claims an interface through a synthetic `usbfs` driver, so a reader in
active use looks bound by that rule.
Link the interface at a named driver directory instead, the way sysfs
does. The case still covers what it was written for — a Synaptics bridge
or a camera on a fingerprint vendor ID — without fixing the shape of the
answer for drivers it was never about.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
