Task procedure lives in agents/skills/ (migrations.md moves there),
system-shape reference in docs/ (AUDIO-TUNING.md renamed to match),
end-user documentation in manual/. AGENTS.md now states the split.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Install missing apps when choosing defaults
* Restore Chromium through browser installer
* Trust default app installer status
* Use full conditionals for install paths
Following the rule as written is what put apply back in the top-level group
listing right after every command in it was hidden: the table drives that
listing on its own, with no regard for whether anything in the group is
visible.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Extract the speed test gauge cluster into a shared SpeedTestOverlay
The dial cluster -- scrim, ignition sweep, self-ranging dials, run-again
button -- moves from the network speed test panel into qs.Ui with the
labels, unit, title, scale stops, and layer namespace as parameters, so
other measurements can wear the same cluster. The network panel keeps
its process handling and becomes a thin dressing of the overlay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add a disk speed test and move speed tests under Trigger > Tests
omarchy-disk-speedtest streams live write and read MB/s once a second by
sampling the backing block device's kernel I/O counters while dd workers
generate the traffic, the same way the network test samples the
interface counters. The stress data is an incompressible urandom chunk
staged in RAM, written with fdatasync per pass and fadvise drop-behind:
O_DIRECT silently falls back to the page cache on btrfs, and zeros never
reach a compressed filesystem at all. Scratch files are created
exclusively per invocation and removed even when a dismissal interrupts
the run mid-phase.
The omarchy.disk-speedtest panel dresses the shared SpeedTestOverlay
with write and read dials in MB/s, titled with the hardware model of
the disk under test.
The menu grows a Trigger > Tests submenu holding the new Disk Speed
Test and the Network Speed Test, which moves there from Setup > Network.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make the disk speed test reproducible, direct, and read-first
Successive runs could swing 40% because the settled figure was just the
last one-second sample of a single buffered dd stream, taken while btrfs
copy-on-write churned the extent allocator on every rewrite pass and the
fadvise cache-eviction dance stayed advisory.
The test files are now marked NOCOW, which is what makes O_DIRECT truly
direct on btrfs -- with checksums on it silently falls back to the page
cache -- and lets every rewrite land in place. Four parallel workers per
phase give the device a queue depth it can stretch out on, and the
figure the dial settles on is the steady-state average over the whole
phase with the first warm-up second excluded, not whatever rate the
final second happened to catch. Together this tightens successive runs
from +/-40% to a few percent of each other, at the device's actual
spec throughput.
The read phase now runs first, staged against freshly written files,
with the read dial on the left. Workers also only loop while the main
script lives, so a dismissal that loses the kill race can no longer
leave an orphan hammering the disk forever, and any worker dying before
the deadline fails the run instead of passing off partial figures.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the menu aliases from the speed test entries
Aliases are reserved for established alternate names users already
type, kept for compatibility -- not something new entries pick up by
default. Note that in the menu definition header and AGENTS.md so the
next entry doesn't repeat it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Group dial readouts with thousands separators
A gen5 disk reads five digits; 11,450 scans, 11450 doesn't. Uses the
locale's grouping separator.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Trim redundant overlay props and unused imports from the speed test panels
The network panel restated the overlay's default unit and scale stops,
and both panels carried imports and an omarchyPath property nothing
uses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Publish the specific speed test error whichever handler fires last
Process exit and stderr stream-finished have no guaranteed order, so a
failure that beat the collector showed the generic message forever even
when the command emitted an actionable one; the collector now replaces
it once the text lands. Also stop clearing the error on every stdout
line: only a new run should do that, or buffered output delivered after
a failed exit erases the failure message.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Arm the disk speed test cleanup before any scratch file exists
A preflight failure -- tmpfs target, missing device statistics, not
enough free space -- exited between mktemp and the trap, leaking the
scratch files. Cleanup also now unlinks before stopping the workers and
sweeps once more after, so even a cleanup cut short by an impatient
SIGKILL leaves no names behind and a final worker pass cannot recreate
one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Split the end-user omarchy skill into topic guides
Move default/omarchy-skill to default/agents/skills/omarchy and break the
monolithic SKILL.md into on-demand topic files for Hyprland config, shell
plugins, theming, and hooks. Update the skill symlink wiring, relink
existing installs through a migration, and correct claims that had drifted
from the implementation: plugin hot-reload, terminal reload, menu
customization, refresh scopes, theme overlays, background locations, hook
timing, and the packaged (not git-managed) system directory.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add capture and contributing guides to the omarchy skill
Cover screenshots, screen recording, OCR text capture, and LocalSend or
Taildrop sharing, plus how to route bug reports, suggestions, and support
questions upstream with diagnostics and captures of the problem attached.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Scope Hyprland reload guidance to the Lua config files
hyprsunset.conf and xdph.conf are read by separate processes, so hyprctl
neither applies nor validates them. Document restarting hyprsunset after
editing its config, including in the night light example.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Leave agents/ ready for other agent artifacts like definitions and
prompts alongside the skills.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Keep only universal rules in AGENTS.md and point to per-task guides
for shell development, acceptance tests, visual verification, command
metadata, and install scripts. Fold the migration notes into
docs/migrations.md and replace .claude/CLAUDE.md with a root CLAUDE.md
importing AGENTS.md.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The previous wording claimed the argument must name a file under
$OMARCHY_PATH/config/ and that anything else is rejected. The check is
`[[ -e $default_config_file ]]` against an interpolated path, so `../AGENTS.md`
resolves in both trees and copies over $HOME/AGENTS.md, exit 0.
- The privilege-escalation rule told agents to use pkexec for all privileged
work, which contradicts default/omarchy-skill/SKILL.md — a file this repo
ships — and the code follows the skill, not this line. Defer to it rather than
restate it, so the two cannot drift apart again.
- config/hypr/hyprlock.conf does not exist, so the refresh example fails with
"Not a shipped user config". Use hypr/hyprland.lua, the example
bin/omarchy-refresh-config prints in its own usage.
- Neither IPC example was right: no target named `bar` is registered anywhere,
and `image-selector` is registered by shell.qml rather than the background
switcher, which registers `background`. Name the targets that exist.
omarchy-update-user-notify.path watched /usr/share/omarchy/migrations, but
pacman writes that directory during every update, including the blessed
omarchy update, which runs omarchy-migrate a step later. The watcher fired a
critical notification for the migrations the update was already applying in
the visible terminal. A watcher cannot tell that apart from a bypassed
pacman -Syu, so the only trigger that never collides with a running update is
a once-per-login check.
The service that already ran at graphical-session.target is now the whole
mechanism, renamed after the command it runs. That is also all the second-user
case needs: markers are per-user, so anyone who did not run the update finds
them missing at their next login.
Login timing means the toast can be sent before the shell has claimed
org.freedesktop.Notifications, so the notifier waits for a live server first.
The wait is omarchy-first-run's, lifted into omarchy-notification-wait rather
than duplicated.
The package keeps omarchy-update-user-notify.service as a symlink onto the new
unit. Existing users hold an absolute wants symlink to the old path, and the
migration that repoints it only runs for users who run an update, which is the
opposite of who the notifier is for.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The canonical colors.toml keys are now background/foreground, including
all permutations (dark_background, darker_background, lighter_background,
dark_foreground, light_foreground, bright_foreground). The old short
names are gone entirely, not kept as aliases; legacy alacritty-generated
themes still resolve through the ANSI color0/color7 fallback.
Theme files are also regrouped: accent/selection/muted first, then the
backgrounds, then the foregrounds, then the named colors.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Reorganizes Omarchy 4 around three layers for populating $HOME:
Seed: omarchy-settings ships defaults to /etc/skel; useradd -m
copies them on user creation
Finalize: omarchy-finalize-user (renamed from omarchy-setup-user)
handles only the runtime tweaks /etc/skel can't do — skill
symlinks, xdg-user-dirs, default browser/mailto, vconsole→hypr
keyboard sync, and install/user/all.sh
Resync: omarchy-reinstall-configs is the explicit, destructive
resync of /etc/skel into an existing user's $HOME
Package-owned files move out of config/ into default/, where the
omarchy-settings PKGBUILD installs them to real system paths:
config/environment.d/fcitx.conf -> /usr/lib/environment.d/
config/fontconfig/fonts.conf -> /usr/share/fontconfig/conf.avail/
config/mimeapps.list -> /usr/share/applications/
config/omarchy.ttf -> /usr/share/fonts/omarchy/
config/systemd/user/*.service -> /usr/lib/systemd/user/
config/uwsm/default -> /usr/share/omarchy/default/uwsm/
config/uwsm/env -> /usr/share/uwsm/env.d/10-omarchy
config/xdg-terminals.list -> /usr/share/xdg-terminal-exec/
omarchy-upgrade-to-4 grows a 'retire' action (renamed from 'move' to
clarify nothing is copied — the system path is owned by the new package
once the user's hash-matched ~/.config copy is removed). Mismatched
copies are kept as backups so user overrides survive the upgrade.
Other simplifications:
- Single env bootstrap at default/bash/env-bootstrap sourced by
/etc/profile.d/omarchy.sh, /etc/skel/.bashrc,
/usr/share/uwsm/env.d/10-omarchy, and default/bash/envs. PATH
prepend only in dev-link mode (production uses /usr/bin/omarchy-*).
- omarchy-refresh-config reads from /etc/skel/.config so refresh
means 'snap to skel'.
- omarchy-reinstall-configs collapses to 'cp -af /etc/skel/. ~/'
plus limine/plymouth/nvim refresh.
- omarchy-font-set uses awk against our own 30-omarchy.conf instead
of xmlstarlet; xmlstarlet dropped from omarchy-base.packages.
- Defer user systemd enables (bt-agent, sleep-lock,
recover-internal-monitor) to first-run via
install/user/first-run/enable-user-units.sh; delete
omarchy-user-systemctl-enable and the per-hardware install
scripts that called it.
- Wireplumber bluetooth-a2dp-autoconnect.conf moves to config/ so
/etc/skel ships it; install/user/hardware/bluetooth.sh deleted.
- Default terminal switched to foot.desktop.
- docs/file-layout.md documents the three-layer model and the
build-time repo→path map.
Introduce a self-contained omarchy-upgrade-to-4 command for legacy installs and remove the 4.0 package-layout transition from the normal migration runner.
Remove legacy online installer entrypoints, collapse migrations for 4.0, and move setup responsibilities into target-side system, hardware, and user commands.
omarchy-shell's bar plugin replaces waybar on every default path, so the
waybar package, configs, indicator scripts, and toggle/restart/refresh
binaries all go away in this commit.
The four small helper scripts that Bar.qml shells out to (weather.sh and
indicators/*.sh) move with the shell rather than disappear \u2014 they live
at default/quickshell/omarchy-shell/scripts/ now, alongside the rest of
the shell code.
Companion script changes:
- omarchy-shell-ipc gains --if-running so fire-and-forget refresh
callers (toggle-idle, toggle-notification-silencing,
update-available-reset, capture-screenrecording) don't accidentally
spawn the shell when it isn't already up.
- omarchy-theme-set, omarchy-tz-select, omarchy-voxtype-{install,model},
omarchy-toggle-nightlight, omarchy-voxtype-config drop their waybar
branches and comments.
- omarchy-voxtype-status's summary stops claiming it's a Waybar helper.
- omarchy-base.packages drops waybar; install/packaging/fonts.sh's
comment points at the new bar consumer.
- SKILL.md / AGENTS.md / omarchy-menu.jsonc lose their waybar entries.
- test/omarchy-cli-test.sh substitutes a remaining toggle command.
