Laptop speakers ship voiced by the vendor's Windows DSP layer, which Linux does
not get. A tuning restores that as a PipeWire filter-chain in front of the
internal speaker sink, matched to the machine by DMI string and expected sink.
Adding a laptop is a directory under default/audio/tunings with two files and no
new code: matching is data. The XPS 14 DA14260 tuning included here was derived by
measuring the xps-audio-linux EasyEffects profile (MIT) and fitting a biquad chain
to it, so no impulse response or other upstream asset is redistributed. It measures
1.24 dB RMS against that reference, and matches its dynamic range within 0.1 LU --
the reference's multiband compressor turned out to contribute nothing, so a linear
chain replaces it. Bass Q is capped deliberately: a closer magnitude fit swung
group delay 31 ms across 63-80 Hz, which smears bass transients.
The graph runs as its own PipeWire client under its own config name rather than
loading into the audio daemon. The daemon only reads its config at startup, so a
daemon-loaded tuning could only be switched by restarting PipeWire -- which drops
every PulseAudio client's connection, and applications that do not reconnect
(Spotify) then have to be restarted by hand. Hosting it separately also contains
failure, since a malformed tuning breaks only that service.
Three things about the surrounding audio graph needed fixing for this to behave:
- Volume must live downstream of the tuning. omarchy-audio-output-sink is now the
single definition of which sink an output's volume really uses, shared by the
volume keys, the output switcher's OSD and the audio panel, so they cannot
disagree. It resolves the current default output, which keeps it correct when
headphones are selected while a tuning exists.
- The tuning's own output is a movable sink input, so rerouting "all streams" to a
newly selected output would drag the processing onto headphones, or into the
tuning's own sink, which is a cycle. It is pinned, and stream moves are limited
to streams carrying an application.name.
- The physical sink a tuning fronts is not independently selectable, since picking
it would only bypass the tuning, so it is kept out of the output list.
Applying happens at first-run, not finalize-user, because finalize-user also runs
in the ISO chroot where there is no audio server and nothing would retry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
omarchy-update-user-notify.path used PathExistsGlob= on the packaged
migrations directory. That directive is level-triggered: systemd re-checks
it every time the triggered unit deactivates and fires again while the glob
still matches. Since applied migrations stay on disk forever (state lives in
~/.local/state/omarchy/migrations), the glob always matches, so the oneshot
notifier re-triggered itself in a tight loop (~26-66 starts/sec) — burning
about a core and flooding the journal for the whole session.
The loop existed since the unit was introduced, but the default start-rate
limit killed it after 5 iterations, taking the .path unit down with
'unit-start-limit-hit'. That symptom was reported as #6174 and fixed
yesterday by setting StartLimitIntervalSec=0 — which removed the only brake
and turned the capped hiccup into an unbounded busy-loop.
Fix the actual cause instead:
* Drop PathExistsGlob= from the .path unit, keeping the edge-triggered
PathModified= watch for updates that land mid-session.
* Revert the StartLimitIntervalSec=0 override; with the level trigger gone
there is no self-re-fire to trip the limit, and the default limit is a
useful backstop again.
* Preserve the once-per-login pending check the glob used to provide by
giving the service its own WantedBy=graphical-session.target, enabled at
first-run alongside the other user units.
* Add a migration that daemon-reloads, revives a rate-limit-killed .path,
restarts the watcher, and enables the login-time notifier on existing
installs.
Verified with transient path/service units: the old config runs the service
200 times in 3 seconds; the new config runs it zero times while idle and
exactly once when a new migration file lands.
Thanks to @HANCORE-Linux for finding and diagnosing the problem.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
omarchy-update-user-notify.path watches /usr/share/omarchy/migrations
with PathModified. A single update commonly drops several migration
files at once, so the oneshot service is re-triggered in a burst and
exceeds the default start-rate limit (StartLimitBurst=5 / 10s):
omarchy-update-user-notify.service: Start request repeated too quickly.
omarchy-update-user-notify.path: Failed with result 'unit-start-limit-hit'.
When the limit trips, the watching .path unit itself fails and stops
watching, so migrations that land later in the session are never
surfaced until the next login.
Set StartLimitIntervalSec=0 on the service. omarchy-migrate-notify is
idempotent, so there is no downside to letting it run on every trigger.
Co-authored-by: Claude <noreply@anthropic.com>
Reorganizes Omarchy 4 around three layers for populating $HOME:
Seed: omarchy-settings ships defaults to /etc/skel; useradd -m
copies them on user creation
Finalize: omarchy-finalize-user (renamed from omarchy-setup-user)
handles only the runtime tweaks /etc/skel can't do — skill
symlinks, xdg-user-dirs, default browser/mailto, vconsole→hypr
keyboard sync, and install/user/all.sh
Resync: omarchy-reinstall-configs is the explicit, destructive
resync of /etc/skel into an existing user's $HOME
Package-owned files move out of config/ into default/, where the
omarchy-settings PKGBUILD installs them to real system paths:
config/environment.d/fcitx.conf -> /usr/lib/environment.d/
config/fontconfig/fonts.conf -> /usr/share/fontconfig/conf.avail/
config/mimeapps.list -> /usr/share/applications/
config/omarchy.ttf -> /usr/share/fonts/omarchy/
config/systemd/user/*.service -> /usr/lib/systemd/user/
config/uwsm/default -> /usr/share/omarchy/default/uwsm/
config/uwsm/env -> /usr/share/uwsm/env.d/10-omarchy
config/xdg-terminals.list -> /usr/share/xdg-terminal-exec/
omarchy-upgrade-to-4 grows a 'retire' action (renamed from 'move' to
clarify nothing is copied — the system path is owned by the new package
once the user's hash-matched ~/.config copy is removed). Mismatched
copies are kept as backups so user overrides survive the upgrade.
Other simplifications:
- Single env bootstrap at default/bash/env-bootstrap sourced by
/etc/profile.d/omarchy.sh, /etc/skel/.bashrc,
/usr/share/uwsm/env.d/10-omarchy, and default/bash/envs. PATH
prepend only in dev-link mode (production uses /usr/bin/omarchy-*).
- omarchy-refresh-config reads from /etc/skel/.config so refresh
means 'snap to skel'.
- omarchy-reinstall-configs collapses to 'cp -af /etc/skel/. ~/'
plus limine/plymouth/nvim refresh.
- omarchy-font-set uses awk against our own 30-omarchy.conf instead
of xmlstarlet; xmlstarlet dropped from omarchy-base.packages.
- Defer user systemd enables (bt-agent, sleep-lock,
recover-internal-monitor) to first-run via
install/user/first-run/enable-user-units.sh; delete
omarchy-user-systemctl-enable and the per-hardware install
scripts that called it.
- Wireplumber bluetooth-a2dp-autoconnect.conf moves to config/ so
/etc/skel ships it; install/user/hardware/bluetooth.sh deleted.
- Default terminal switched to foot.desktop.
- docs/file-layout.md documents the three-layer model and the
build-time repo→path map.
