* Extract the speed test gauge cluster into a shared SpeedTestOverlay
The dial cluster -- scrim, ignition sweep, self-ranging dials, run-again
button -- moves from the network speed test panel into qs.Ui with the
labels, unit, title, scale stops, and layer namespace as parameters, so
other measurements can wear the same cluster. The network panel keeps
its process handling and becomes a thin dressing of the overlay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add a disk speed test and move speed tests under Trigger > Tests
omarchy-disk-speedtest streams live write and read MB/s once a second by
sampling the backing block device's kernel I/O counters while dd workers
generate the traffic, the same way the network test samples the
interface counters. The stress data is an incompressible urandom chunk
staged in RAM, written with fdatasync per pass and fadvise drop-behind:
O_DIRECT silently falls back to the page cache on btrfs, and zeros never
reach a compressed filesystem at all. Scratch files are created
exclusively per invocation and removed even when a dismissal interrupts
the run mid-phase.
The omarchy.disk-speedtest panel dresses the shared SpeedTestOverlay
with write and read dials in MB/s, titled with the hardware model of
the disk under test.
The menu grows a Trigger > Tests submenu holding the new Disk Speed
Test and the Network Speed Test, which moves there from Setup > Network.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make the disk speed test reproducible, direct, and read-first
Successive runs could swing 40% because the settled figure was just the
last one-second sample of a single buffered dd stream, taken while btrfs
copy-on-write churned the extent allocator on every rewrite pass and the
fadvise cache-eviction dance stayed advisory.
The test files are now marked NOCOW, which is what makes O_DIRECT truly
direct on btrfs -- with checksums on it silently falls back to the page
cache -- and lets every rewrite land in place. Four parallel workers per
phase give the device a queue depth it can stretch out on, and the
figure the dial settles on is the steady-state average over the whole
phase with the first warm-up second excluded, not whatever rate the
final second happened to catch. Together this tightens successive runs
from +/-40% to a few percent of each other, at the device's actual
spec throughput.
The read phase now runs first, staged against freshly written files,
with the read dial on the left. Workers also only loop while the main
script lives, so a dismissal that loses the kill race can no longer
leave an orphan hammering the disk forever, and any worker dying before
the deadline fails the run instead of passing off partial figures.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the menu aliases from the speed test entries
Aliases are reserved for established alternate names users already
type, kept for compatibility -- not something new entries pick up by
default. Note that in the menu definition header and AGENTS.md so the
next entry doesn't repeat it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Group dial readouts with thousands separators
A gen5 disk reads five digits; 11,450 scans, 11450 doesn't. Uses the
locale's grouping separator.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Trim redundant overlay props and unused imports from the speed test panels
The network panel restated the overlay's default unit and scale stops,
and both panels carried imports and an omarchyPath property nothing
uses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Publish the specific speed test error whichever handler fires last
Process exit and stderr stream-finished have no guaranteed order, so a
failure that beat the collector showed the generic message forever even
when the command emitted an actionable one; the collector now replaces
it once the text lands. Also stop clearing the error on every stdout
line: only a new run should do that, or buffered output delivered after
a failed exit erases the failure message.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Arm the disk speed test cleanup before any scratch file exists
A preflight failure -- tmpfs target, missing device statistics, not
enough free space -- exited between mktemp and the trap, leaking the
scratch files. Cleanup also now unlinks before stopping the workers and
sweeps once more after, so even a cleanup cut short by an impatient
SIGKILL leaves no names behind and a final worker pass cannot recreate
one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Extract the Wi-Fi QR share card into its own omarchy.wifiqr panel plugin
omarchy-network-qr now leads with an iface/security/ssid meta line, so a
bare summon self-detects the connection and the plugin owns the whole
share flow. The network panel loses its overlay lifecycle: with no
centered card left inside it, the shadowed open/close collapses back to
the stock panel behavior, and the QR button just summons the plugin --
which a clone or third-party plugin can replace, like the speed test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep canceled QR and password runs from leaking into their replacements
Copilot review: the cancellation guards dropped in onExited while the
canceled run's collectors were still allowed to fire, so a stale stderr
could shadow a successful regeneration and a stale password could be
revealed under a new network's card. The guards now stay up until the
next run launches, good output settles any earlier error, and a bare
re-summon no longer inherits the previous card's SSID.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The network panel now summons it, so a clone or a third-party plugin
declaring clonedFrom: omarchy.speedtest can replace the whole speed
test -- dials and run orchestration alike -- for every caller.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make omarchy-network-qr detect the connected Wi-Fi interface
The interface argument is now optional so IPC and menu callers can
summon the QR card without knowing the device name.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test into a modal card with cluster dials
The network panel's Run button and the new omarchy.network speedTest
IPC route open a centered card where download and upload dials sweep
on open and track the live readings, Tucson style. Dismissing the card
stops the traffic workers. The QR card gains a showQr IPC route.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add Setup > Network menu with DNS, QR Code, and Speed Test
DNS switches providers through omarchy-dns with the current choice
checked. QR Code only shows while connected over Wi-Fi.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Hold the speed test card steady and add a corner dismiss
The Run Again button now fades instead of unmounting so the card keeps
its size across runs, and a small X in the corner closes the card
alongside Esc and the scrim.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test action into the network panel hero
A speedometer icon beside the QR share replaces the dedicated inline
section, and the keyboard chain loses its speed stop accordingly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the speed test cluster on the scrim
Drop the bordered card and the pulsing halo: like the Tucson's floating
cluster, the dials now sit directly on a near-black scrim with a soft
under-glow along the value arc, fainter ticks, and hubless needles that
fade toward the pivot.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Center the retry button between the dials
The measuring status lines and the corner dismiss go away; the retry
button moves into the gap between the two dials like a cluster's center
display, anchored out of the column flow so nothing ever shifts. The
fast.com attribution lives on as its tooltip, and only errors still
print below the cluster.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Put the retry button back beneath the dial pair
The dials close ranks again and the retry button returns below them,
centered on the pair and still fading in place so nothing shifts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Harden the network IPC routes against stale panel state
The QR menu route forces interface self-detection instead of trusting
details that stop refreshing while the panel is closed, and the
widget's canonical close now tears down the centered cards and their
traffic instead of only hiding the compact panel.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Re-range the speed dials for every run
The scale latched upward forever, so one unusually fast run would
compress every later one for the lifetime of the shell process. Each
dial now returns to the base scale when its measurement starts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the Wi-Fi QR share like the speed test
Same presentation as the dials: no bordered card, just the code on a
heavy scrim. Only the dark modules paint now, so the white canvas can
round its corners while the spec quiet zone keeps the code clear.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pick the default-route device and pin the locale in QR detection
nmcli localizes state names, so the detection fallback pins LC_ALL=C
and accepts states like "connected (externally)". Detection now prefers
the default-route device, matching the connection the panel and the
menu's visibility gate describe when several Wi-Fi adapters are up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make every network summon path overlay-aware
Opening the widget while a centered card is up now dismisses the card
instead of raising the compact panel behind an exclusive overlay --
the shadowed open() covers the keybind toggle, the bar icon, and IPC.
Re-summoning a card while its process is still tearing down queues the
fresh request for onExited instead of dropping it, and the speed test
route refreshes connection details like the QR route does.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Shrink the overlays to fit narrow outputs
The dial cluster and the QR card scale down instead of clipping when a
portrait or heavily scaled display is narrower than their natural size.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Give built-in plugins an honest on/off state
Every built-in reported itself enabled no matter what. A bar widget said
"enabled" while sitting nowhere near the bar, and disabling a built-in service
silently did nothing, because enabled meant "listed in plugins[]" and a
built-in never is. Nothing surfaced that, since the only caller listing plugins
was the CLI.
For a widget, on and off is its place in the bar, so listPlugins reports layout
membership -- what enable/disable actually toggles. For everything else built
in, loading by default is the right behaviour to keep, so switching one off is
recorded the other way round, in disabledPlugins[]. shell.json still carries
only the deviation from the defaults: the key is dropped the moment nothing is
switched off, leaving a config that never disabled anything byte-identical.
isEnabled still answers a separate question -- whether the component loads at
all -- and deliberately does not follow a widget out of the bar. omarchy.menu
is both a widget and the menu itself, so tying the two together would let
taking its button off the bar lock the menu out of the shell, with no way back
that isn't the CLI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Manage plugins from Setup > Plugins
Plugins were CLI-only. Setup > Plugins now offers Enable, Disable, Add, and
Remove, each list living in the menu itself so picking a row acts on it.
Enable and Disable cover the built-ins as well as anything installed -- the bar
widgets you can put in the bar, the services and overlays you can switch off.
Remove is limited to plugins the user installed, since a built-in has no
checkout to delete, and stays hidden until there is one. Whole-bar
replacements are left out; those are chosen under Style.
Enabling a bar widget asks for a section first, because enabling alone drops it
on the right and the only way to move it was a follow-up bar plugin move. The
CLI asks the same question after its own add, so both paths place a widget the
same way. Add and Remove run in a terminal: one needs a git URL and shows the
trust warning before cloning, the other deletes a checkout and prints where it
backed it up.
Providers grew two hooks for this. placementFor turns a row into a submenu
instead of an action, and volatile re-runs the enumeration when its submenu is
entered -- picking from these lists is what changes them, and rows a provider
no longer returns now drop out instead of lingering forever.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the plugin menu after review
Menu.qml carried its own shellQuote while already importing Util and calling
Util.shellQuote a few lines up; two copies of the same escaping is one place
for a future fix to miss. isDisabled walked the array by hand to compare values
it writes itself, and dropDisabled was an eight-line helper with one caller.
Two bugs came out of the same pass. A whole-bar replacement belongs under Style
rather than these lists, but the exclusion sat in the shared row builder, so a
third-party bar could be installed and never removed -- Remove would show an
empty list under a guard that said something was there. The exclusion now sits
on the two lists that mean it.
Rows are keyed by id, and distinct plugin ids can slugify alike: acme.foo,
acme_foo and acme-foo all give acme-foo. The merge keeps the first row per id,
so the rest simply vanished from the list with nothing to say why. Row ids are
now made distinct before merging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Pick a plugin the way we pick a theme
Setup > Plugins listed plugins as menu rows, which needed three providers, a
placement submenu, a volatile-refresh hook and a row-swap in the merge. Only
Font and Apps are built that way. Theme, Background, Unlock, Timezone and
Keybindings all pipe a list into omarchy-menu-select instead, which is one
action string and a small script -- so that is what these use now.
The trade is search: a plugin name is no longer findable from the root prompt.
Neither is a theme name or a timezone, and Enable Plugin still is, so the loss
sits where the rest of the menu already puts it.
Two pieces of the row machinery stay, because they are worth having for the
lists that remain. A volatile provider re-runs when its submenu is entered, so
a font installed since the shell started now shows up without restarting it,
and rows a provider stops returning drop out. Row ids are still made distinct
before merging: Fira Code and Fira-Code both slug to fira-code, and a repeated
id was silently dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let a picked option carry an icon
Moving the plugin lists onto omarchy-menu-select cost them their glyphs: the
select mode has always hardcoded an empty icon, which is why Timezone and
Keybindings have none either. An option may now lead with one, as
"<glyph><TAB><label>". The menu shows the glyph, filters on the label, and
hands the label back, so a caller never strips a glyph off its own selection
and a list of plain strings behaves exactly as before.
The plugin picker uses it for the puzzle glyph on each plugin and the align
glyphs on the sections, which also regain the capitals they lost when the
section names were passed through raw.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Switch bars by enabling one
A bar option was kept out of Enable and Disable on the grounds that picking
which bar to run belongs under Style -- but nothing under Style ever offered
it, so an installed bar could be added and removed and never actually put to
use. The menu was guarding a door to a room that was never built.
Enabling one is the switch. setEnabled already assigns bar.id for a bar
option, so a bar has always replaced the one before it; only the picker's
filter stood in the way. Dropping it costs nothing else, because enabled for a
bar option means active: the bar in use is the one row absent from Enable,
every other installed bar is one pick away, and the built-in is just another
entry, so going back to it is enabling Bar.
Disable keeps the exclusion. That is the one verb a bar cannot answer -- there
is no off, only a successor -- and offering it would have listed the built-in
bar on a stock system, where turning it off deletes a bar.id that was never
set and nothing happens.
A bar carries the bar glyph rather than the puzzle one, so a row that replaces
the whole bar does not read like one more widget to switch on, and enable now
says "Now using X as the bar" instead of "Enabled X", which understated a
whole-bar swap in both the enable and the freshly-added path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Refuse a plugin that declares a kind it cannot load
A kind is a promise to supply something to load, and the shell reads that
something from a fixed key: entryPoints.bar to draw a bar, entryPoints.menu to
open a menu. Nothing checked the promise. A manifest could claim kinds ["bar"]
with no bar entry point, pass validation, install, and enable -- and then the
bar would fall back to the built-in and the widget would be skipped, leaving a
plugin that does nothing, explained only by a console.warn nobody reads.
Our own plugins have been held to this table by plugins-test.sh all along.
This holds third-party ones to the same table, at add and update time, where
there is still someone to tell.
A kind outside the table is left alone rather than guessed at, so a shell that
learns a new kind does not need this list updated first. The cost is that a
misspelled kind still installs quietly.
omarchy-plugin-validate had no tests; it has some now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Act on the plugin whose row was picked
The picker showed a name and then looked that name up again across every
plugin, filtered set or not, taking the first match. Two plugins can share a
name: cloning one keeps the name it was cloned from, so the documented
`omarchy plugin clone omarchy.clock local.clock` leaves two plugins called
Clock. Enable listed the clone -- the built-in was already enabled, so only the
clone was eligible -- and then enabled omarchy.clock, moving the built-in
widget instead. Remove listed the clone and tried to delete a built-in that has
no checkout to delete.
A row now carries its id alongside its label, and the id is read back off the
row that was picked instead of being derived from the name a second time. Where
a name is not unique among the rows on offer, the label carries the id too, so
two rows that would both say Clock can be told apart at all -- which they could
not before, whichever one the pick resolved to.
The verb prompt only ever sees the first two fields, so the menu shows what it
always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Never ask a bar where to sit in the bar
A manifest may declare both bar and bar-widget, and validation accepts it. The
picker saw bar-widget, asked for a section, and passed it to enable. setEnabled
takes bar as the dominant kind: it writes bar.id and returns, adding nothing to
any layout, so the move that followed had no widget to find and failed -- after
the bar had already been switched. A partial success with an error on the way
out.
Bar wins ahead of bar-widget now, in the picker and in the placement prompt
`plugin add --enable` asks, so a bar is enabled without a placement it cannot
use. The CLI refuses a placement on a bar outright, before the bar is switched
rather than after, since `omarchy plugin enable <bar> --section left` could
reach the same half-applied state without going through either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Only replacement, no off
* Add default placement for bar widgets
* Simplify plugin menu actions
* Document plugin placement behavior
* Allow dropping widgets in empty bar space
* Treat plugin dependencies as runtime invariants
* Reject duplicate plugin ids on add
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every install row that leaves a durable artifact now carries a `when`
that mirrors its remove counterpart, negated. Packages check
`omarchy-pkg-present`, Ollama checks the command since the action picks
between three packages, and the rest check whatever the installer
actually leaves behind: Games/battlenet, the Xbox Cloud and Windows VM
desktop files, the flatpak, the mise install dirs, ~/.rustup, ~/.opam,
the composer laravel binary, the phx_new archive.
Chromium Account now shows only when chromium-flags.conf exists and
lacks the oauth client id. It was a visible no-op both before Chromium
was installed and after the flags had been added.
The pickers stay unguarded: Package, AUR, Web App, TUI, Style, Docker
DB, and the RetroArch Game Launcher, which builds one launcher per game.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A Dell XPS 14 with no fingerprint reader was invited to set one up on first
run. Its Synaptics webcam bridge, 06cb:0701 "SVP7500" bound to usbio-bridge,
matched omarchy-hw-fingerprint on the bare 06cb vendor ID.
The vendor list already excludes Elan and STMicro for being multi-purpose, but
Synaptics is just as multi-purpose and was left in. Dropping 06cb is not an
option: Synaptics and Validity are among the most common real reader vendors,
and many of those readers report no product string at all, so the vendor ID is
the only signal that finds them.
The vendor guess is now qualified instead. libfprint drives every reader it
supports from userspace over libusb, so a real reader sits with no kernel
driver bound to any of its interfaces, while the bridges, touchpads and cameras
that share these vendor IDs all bind one. The guard applies only to the fuzzy
vendor-ID path; a device whose product descriptor names it a fingerprint reader
is still trusted outright, since that signal is precise enough on its own and
should not be lost to a driver that happened to claim the device.
The menu entry was a second surface for the same bug. Setup > Security >
Fingerprint carried no when clause, unlike the Remove entry beside it, so it
appeared on every machine and dead-ended in the setup script's own hardware
check. It now gates on the same detector.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017q97Rsk8KwgaPUVq5ArLgM
Bring back per-theme Plymouth unlock theming, dropped when walker +
elephant were removed. Selection now uses the same image carousel as
the theme and background switchers instead of a name list.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
omarchy bar transparent now accepts toggle, flipping the current value
in one jq update (absent counts as opaque, matching the shell).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Static submenus and links now inherit visibility from their descendants,
so hardware sections like Touchpad Haptics disappear on machines without
the hardware instead of opening empty. Laptop Display and Mirror Display
are guarded by omarchy-hw-laptop.
The guard evaluator brace-wraps every when/checked condition before
silencing it, so conditions in the jsonc no longer need their own
>/dev/null plumbing, and parents no longer need to repeat their
children's guards.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Point the Emacs entry in the install-editor menu at a dedicated
omarchy-install-editor-emacs script, matching the pattern already used
for Helix, VSCode, and Zed. The script installs the omarchy-emacs AUR
package and runs its installer, which pulls in emacs-wayland, applies
the theme/font integration, and enables the user emacs.service.
This is the AUR-packaged approach dhh suggested on #4807 (superseding
the in-tree integration proposed there), now that the package exists and
is maintained on the AUR. End-user behavior is unchanged except that a
freshly installed Emacs now tracks the active Omarchy theme and font out
of the box.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Brave now publishes brave-origin-bin on AUR, so use it instead of
brave-origin-beta-bin. The stable wrapper also parses flags files
correctly, so Brave Origin can use the normal chromium flags like
the other Chromium-based browsers.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Position the bar by dragging (or click-and-holding) empty bar space
toward a screen edge, with a ghost slab previewing the target edge.
With drag for position and double-click for transparency, the bar
config panel, its inline gear button, and the omarchy-launch-bar-settings
CLI are no longer needed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The omarchy-bar command had grown three overlapping ways to inspect the
bar (show/layout/list/options, plus selected/active/available/widgets
aliases) and mixed layout mutation in with bar-level settings. Untangle
it into two focused commands:
- omarchy-bar keeps only the bar-level settings that write shell.json:
use, reset, position, transparent, and settings. reset now delegates
to `use omarchy.bar` rather than duplicating the del(.bar.id) write.
- omarchy-bar-plugin owns all layout mutation: add, move, remove, set,
and replace, with the placement flags and jq resolve/anchor helpers.
`omarchy bar plugin ...` routes here via the dispatcher.
Drop the inspection commands entirely: the layout is visible on the bar,
the config is shell.json, and widget/option ids come from
`omarchy plugin list`. Nothing consumed the show output programmatically
except tests. This also removes omarchy-bar-position, whose jq write was
a duplicate of `omarchy bar position`.
Strip environment-invariant guards (require_command, require_omarchy_path)
that defended against jq or OMARCHY_PATH being absent — neither happens on
a real system. Keep the user-input validation (--section/--index) and the
atomic shell.json write.
Update callers (service install/remove, refresh-shell, plugin-clone,
plugin enable), keybindings, the menu, tests, and docs to the new split.
