* Give built-in plugins an honest on/off state
Every built-in reported itself enabled no matter what. A bar widget said
"enabled" while sitting nowhere near the bar, and disabling a built-in service
silently did nothing, because enabled meant "listed in plugins[]" and a
built-in never is. Nothing surfaced that, since the only caller listing plugins
was the CLI.
For a widget, on and off is its place in the bar, so listPlugins reports layout
membership -- what enable/disable actually toggles. For everything else built
in, loading by default is the right behaviour to keep, so switching one off is
recorded the other way round, in disabledPlugins[]. shell.json still carries
only the deviation from the defaults: the key is dropped the moment nothing is
switched off, leaving a config that never disabled anything byte-identical.
isEnabled still answers a separate question -- whether the component loads at
all -- and deliberately does not follow a widget out of the bar. omarchy.menu
is both a widget and the menu itself, so tying the two together would let
taking its button off the bar lock the menu out of the shell, with no way back
that isn't the CLI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Manage plugins from Setup > Plugins
Plugins were CLI-only. Setup > Plugins now offers Enable, Disable, Add, and
Remove, each list living in the menu itself so picking a row acts on it.
Enable and Disable cover the built-ins as well as anything installed -- the bar
widgets you can put in the bar, the services and overlays you can switch off.
Remove is limited to plugins the user installed, since a built-in has no
checkout to delete, and stays hidden until there is one. Whole-bar
replacements are left out; those are chosen under Style.
Enabling a bar widget asks for a section first, because enabling alone drops it
on the right and the only way to move it was a follow-up bar plugin move. The
CLI asks the same question after its own add, so both paths place a widget the
same way. Add and Remove run in a terminal: one needs a git URL and shows the
trust warning before cloning, the other deletes a checkout and prints where it
backed it up.
Providers grew two hooks for this. placementFor turns a row into a submenu
instead of an action, and volatile re-runs the enumeration when its submenu is
entered -- picking from these lists is what changes them, and rows a provider
no longer returns now drop out instead of lingering forever.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the plugin menu after review
Menu.qml carried its own shellQuote while already importing Util and calling
Util.shellQuote a few lines up; two copies of the same escaping is one place
for a future fix to miss. isDisabled walked the array by hand to compare values
it writes itself, and dropDisabled was an eight-line helper with one caller.
Two bugs came out of the same pass. A whole-bar replacement belongs under Style
rather than these lists, but the exclusion sat in the shared row builder, so a
third-party bar could be installed and never removed -- Remove would show an
empty list under a guard that said something was there. The exclusion now sits
on the two lists that mean it.
Rows are keyed by id, and distinct plugin ids can slugify alike: acme.foo,
acme_foo and acme-foo all give acme-foo. The merge keeps the first row per id,
so the rest simply vanished from the list with nothing to say why. Row ids are
now made distinct before merging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Pick a plugin the way we pick a theme
Setup > Plugins listed plugins as menu rows, which needed three providers, a
placement submenu, a volatile-refresh hook and a row-swap in the merge. Only
Font and Apps are built that way. Theme, Background, Unlock, Timezone and
Keybindings all pipe a list into omarchy-menu-select instead, which is one
action string and a small script -- so that is what these use now.
The trade is search: a plugin name is no longer findable from the root prompt.
Neither is a theme name or a timezone, and Enable Plugin still is, so the loss
sits where the rest of the menu already puts it.
Two pieces of the row machinery stay, because they are worth having for the
lists that remain. A volatile provider re-runs when its submenu is entered, so
a font installed since the shell started now shows up without restarting it,
and rows a provider stops returning drop out. Row ids are still made distinct
before merging: Fira Code and Fira-Code both slug to fira-code, and a repeated
id was silently dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let a picked option carry an icon
Moving the plugin lists onto omarchy-menu-select cost them their glyphs: the
select mode has always hardcoded an empty icon, which is why Timezone and
Keybindings have none either. An option may now lead with one, as
"<glyph><TAB><label>". The menu shows the glyph, filters on the label, and
hands the label back, so a caller never strips a glyph off its own selection
and a list of plain strings behaves exactly as before.
The plugin picker uses it for the puzzle glyph on each plugin and the align
glyphs on the sections, which also regain the capitals they lost when the
section names were passed through raw.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Switch bars by enabling one
A bar option was kept out of Enable and Disable on the grounds that picking
which bar to run belongs under Style -- but nothing under Style ever offered
it, so an installed bar could be added and removed and never actually put to
use. The menu was guarding a door to a room that was never built.
Enabling one is the switch. setEnabled already assigns bar.id for a bar
option, so a bar has always replaced the one before it; only the picker's
filter stood in the way. Dropping it costs nothing else, because enabled for a
bar option means active: the bar in use is the one row absent from Enable,
every other installed bar is one pick away, and the built-in is just another
entry, so going back to it is enabling Bar.
Disable keeps the exclusion. That is the one verb a bar cannot answer -- there
is no off, only a successor -- and offering it would have listed the built-in
bar on a stock system, where turning it off deletes a bar.id that was never
set and nothing happens.
A bar carries the bar glyph rather than the puzzle one, so a row that replaces
the whole bar does not read like one more widget to switch on, and enable now
says "Now using X as the bar" instead of "Enabled X", which understated a
whole-bar swap in both the enable and the freshly-added path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Refuse a plugin that declares a kind it cannot load
A kind is a promise to supply something to load, and the shell reads that
something from a fixed key: entryPoints.bar to draw a bar, entryPoints.menu to
open a menu. Nothing checked the promise. A manifest could claim kinds ["bar"]
with no bar entry point, pass validation, install, and enable -- and then the
bar would fall back to the built-in and the widget would be skipped, leaving a
plugin that does nothing, explained only by a console.warn nobody reads.
Our own plugins have been held to this table by plugins-test.sh all along.
This holds third-party ones to the same table, at add and update time, where
there is still someone to tell.
A kind outside the table is left alone rather than guessed at, so a shell that
learns a new kind does not need this list updated first. The cost is that a
misspelled kind still installs quietly.
omarchy-plugin-validate had no tests; it has some now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Act on the plugin whose row was picked
The picker showed a name and then looked that name up again across every
plugin, filtered set or not, taking the first match. Two plugins can share a
name: cloning one keeps the name it was cloned from, so the documented
`omarchy plugin clone omarchy.clock local.clock` leaves two plugins called
Clock. Enable listed the clone -- the built-in was already enabled, so only the
clone was eligible -- and then enabled omarchy.clock, moving the built-in
widget instead. Remove listed the clone and tried to delete a built-in that has
no checkout to delete.
A row now carries its id alongside its label, and the id is read back off the
row that was picked instead of being derived from the name a second time. Where
a name is not unique among the rows on offer, the label carries the id too, so
two rows that would both say Clock can be told apart at all -- which they could
not before, whichever one the pick resolved to.
The verb prompt only ever sees the first two fields, so the menu shows what it
always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Never ask a bar where to sit in the bar
A manifest may declare both bar and bar-widget, and validation accepts it. The
picker saw bar-widget, asked for a section, and passed it to enable. setEnabled
takes bar as the dominant kind: it writes bar.id and returns, adding nothing to
any layout, so the move that followed had no widget to find and failed -- after
the bar had already been switched. A partial success with an error on the way
out.
Bar wins ahead of bar-widget now, in the picker and in the placement prompt
`plugin add --enable` asks, so a bar is enabled without a placement it cannot
use. The CLI refuses a placement on a bar outright, before the bar is switched
rather than after, since `omarchy plugin enable <bar> --section left` could
reach the same half-applied state without going through either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Only replacement, no off
* Add default placement for bar widgets
* Simplify plugin menu actions
* Document plugin placement behavior
* Allow dropping widgets in empty bar space
* Treat plugin dependencies as runtime invariants
* Reject duplicate plugin ids on add
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every install row that leaves a durable artifact now carries a `when`
that mirrors its remove counterpart, negated. Packages check
`omarchy-pkg-present`, Ollama checks the command since the action picks
between three packages, and the rest check whatever the installer
actually leaves behind: Games/battlenet, the Xbox Cloud and Windows VM
desktop files, the flatpak, the mise install dirs, ~/.rustup, ~/.opam,
the composer laravel binary, the phx_new archive.
Chromium Account now shows only when chromium-flags.conf exists and
lacks the oauth client id. It was a visible no-op both before Chromium
was installed and after the flags had been added.
The pickers stay unguarded: Package, AUR, Web App, TUI, Style, Docker
DB, and the RetroArch Game Launcher, which builds one launcher per game.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A Dell XPS 14 with no fingerprint reader was invited to set one up on first
run. Its Synaptics webcam bridge, 06cb:0701 "SVP7500" bound to usbio-bridge,
matched omarchy-hw-fingerprint on the bare 06cb vendor ID.
The vendor list already excludes Elan and STMicro for being multi-purpose, but
Synaptics is just as multi-purpose and was left in. Dropping 06cb is not an
option: Synaptics and Validity are among the most common real reader vendors,
and many of those readers report no product string at all, so the vendor ID is
the only signal that finds them.
The vendor guess is now qualified instead. libfprint drives every reader it
supports from userspace over libusb, so a real reader sits with no kernel
driver bound to any of its interfaces, while the bridges, touchpads and cameras
that share these vendor IDs all bind one. The guard applies only to the fuzzy
vendor-ID path; a device whose product descriptor names it a fingerprint reader
is still trusted outright, since that signal is precise enough on its own and
should not be lost to a driver that happened to claim the device.
The menu entry was a second surface for the same bug. Setup > Security >
Fingerprint carried no when clause, unlike the Remove entry beside it, so it
appeared on every machine and dead-ended in the setup script's own hardware
check. It now gates on the same detector.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017q97Rsk8KwgaPUVq5ArLgM
Bring back per-theme Plymouth unlock theming, dropped when walker +
elephant were removed. Selection now uses the same image carousel as
the theme and background switchers instead of a name list.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
omarchy bar transparent now accepts toggle, flipping the current value
in one jq update (absent counts as opaque, matching the shell).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Static submenus and links now inherit visibility from their descendants,
so hardware sections like Touchpad Haptics disappear on machines without
the hardware instead of opening empty. Laptop Display and Mirror Display
are guarded by omarchy-hw-laptop.
The guard evaluator brace-wraps every when/checked condition before
silencing it, so conditions in the jsonc no longer need their own
>/dev/null plumbing, and parents no longer need to repeat their
children's guards.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Point the Emacs entry in the install-editor menu at a dedicated
omarchy-install-editor-emacs script, matching the pattern already used
for Helix, VSCode, and Zed. The script installs the omarchy-emacs AUR
package and runs its installer, which pulls in emacs-wayland, applies
the theme/font integration, and enables the user emacs.service.
This is the AUR-packaged approach dhh suggested on #4807 (superseding
the in-tree integration proposed there), now that the package exists and
is maintained on the AUR. End-user behavior is unchanged except that a
freshly installed Emacs now tracks the active Omarchy theme and font out
of the box.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Brave now publishes brave-origin-bin on AUR, so use it instead of
brave-origin-beta-bin. The stable wrapper also parses flags files
correctly, so Brave Origin can use the normal chromium flags like
the other Chromium-based browsers.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Position the bar by dragging (or click-and-holding) empty bar space
toward a screen edge, with a ghost slab previewing the target edge.
With drag for position and double-click for transparency, the bar
config panel, its inline gear button, and the omarchy-launch-bar-settings
CLI are no longer needed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The omarchy-bar command had grown three overlapping ways to inspect the
bar (show/layout/list/options, plus selected/active/available/widgets
aliases) and mixed layout mutation in with bar-level settings. Untangle
it into two focused commands:
- omarchy-bar keeps only the bar-level settings that write shell.json:
use, reset, position, transparent, and settings. reset now delegates
to `use omarchy.bar` rather than duplicating the del(.bar.id) write.
- omarchy-bar-plugin owns all layout mutation: add, move, remove, set,
and replace, with the placement flags and jq resolve/anchor helpers.
`omarchy bar plugin ...` routes here via the dispatcher.
Drop the inspection commands entirely: the layout is visible on the bar,
the config is shell.json, and widget/option ids come from
`omarchy plugin list`. Nothing consumed the show output programmatically
except tests. This also removes omarchy-bar-position, whose jq write was
a duplicate of `omarchy bar position`.
Strip environment-invariant guards (require_command, require_omarchy_path)
that defended against jq or OMARCHY_PATH being absent — neither happens on
a real system. Keep the user-input validation (--section/--index) and the
atomic shell.json write.
Update callers (service install/remove, refresh-shell, plugin-clone,
plugin enable), keybindings, the menu, tests, and docs to the new split.
