Bar widgets propagate their composed press-and-hold down to the center gesture
area without handing over the grab, so the gesture area started a bar move and
then received neither a release nor a cancel to end it. The move ghost stayed on
screen for the rest of the session. Ignore the gesture unless we hold the press.
Closes#6881
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
The letters name a panel; the numbers count them. One is the leftmost
panel in the right section, so the number matches the icon a user would
point at: a widget with no panel of its own is passed over, and so is one
that is hiding itself.
Counting rather than naming means the hotkeys follow the bar. Rearranging
the section, or adding a widget to it, renumbers the panels with no
binding to rewrite.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* Place a bar widget on a bar without the widget it names
'omarchy bar put X --after Y' refused outright when Y was not on the bar, so
migration 1786279107 failed for every user whose clock is their own clone of
omarchy.clock rather than the built-in, and took the rest of the migration
chain down with it. put is the verb a migration or an install reaches for
precisely because it cannot know what the bar it places into looks like, so it
now falls back to the widget's usual spot instead of failing. 'plugin enable',
which someone types, still says when it cannot find the target.
A clone also answers as a placement target now, whether it is the widget the
placement named or the anchor the fallback lands against: cloning the clock
leaves a bar carrying your id where omarchy.clock used to be, and a caller
naming the source means the clone that took its place, the way resolveEnabledId
already routes calls to it. So the widget sits next to that clock rather than
at the end of the section.
Fixes#6678
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep asking a shell that is still starting
An 'omarchy update' landing while the shell restarts failed migration
1786279107 twice over. Quickshell answers a call made before it finishes
loading with "Not ready to accept queries yet." on stdout and exits 0, so a
caller polling with a ping read a starting shell as up and then took that
sentence for the answer to its real call; report it as unreachable, which every
caller already knows how to handle, and omarchy-restart-shell stops cutting its
readiness loop short on it too.
Reading the plugin manifests is a subprocess behind that, so IPC starts
answering before the registry knows the widget it is being asked to place, and
put refused it as unknown. Say which of the two it is and let put keep asking.
Only a shell that was never there is nothing to fail over. One that never
finishes starting, one that stops responding, one too old to know the call at
all: each has to fail, since omarchy-migrate records a migration that returns 0
as done, and the widget is then never placed and never asked for again.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Fall back for the shell an update has not restarted yet
omarchy-update runs its migrations before omarchy-update-restart, so the shell
answering migration 1786279107 on the update that carries this fix is still the
one that shipped without it, and it refuses the placement exactly as before.
The users this is for would have watched one more update go wrong. put owns the
fallback it documents, so let the command carry it: asked again without the
neighbour the shell says it cannot find, that shell places the widget.
A restarted shell never answers this way — it falls back itself, and knows to
look for a clone of the widget the placement named, which the command cannot.
Having answered once is now remembered across both asks. A shell that speaks
and is then gone has stopped mid-request, and reading that as a machine that
never had one would leave the migration recorded as done.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wait for a shell that has not appeared yet
A shell being spawned has no socket to answer on, and nothing tells the command
a launch is under way, so a put landing in that window read the silence as a
machine without a shell and carried on — leaving the migration recorded as done
with nothing placed. Give one three seconds to turn up first. A machine that
genuinely has no shell still carries on, three seconds later.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Leave a clone of the widget being put where it is
A clone is the widget it was cloned from wearing its owner's name, so a bar
carrying one already has what put is being asked to place. put only saw the
literal id, and enabling a first-party source whose clone is active is how you
switch back to the built-in — so a migration placing omarchy.keyboard-layout
would have handed a user's own copy back for the shipped one, and called it
done. Targeting learned to read a clone as its source; presence had not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the comments on the bar put path
Roughly a line of comment per line of code, most of it restating what the code
and the assertion messages already say.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Hold the indicator peek open while the pointer is on the bar
Revealing the hidden indicators widens their section, and a section that
grows can slide a neighbouring widget under a pointer that never moved.
Collapsing the peek on that un-hover narrowed the section again, moved the
neighbour back out, and re-opened the peek, so a pointer resting in the bar
space beside a grown section stuttered the bar until it moved away.
Hold the peek while the pointer is anywhere on the bar and close it only
once the pointer has left, which keeps the reveal-on-empty-space gesture
and drops the feedback loop.
Fixes#6581
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Assert the whole-bar hover helper does what the peek depends on
The earlier assertions all held against a no-op setBarHovered, which would
leave barHovered false and let the oscillation straight back in. Pin the
assignment and the collapse re-run too, so the helper cannot be emptied
without the suite noticing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let the delayed peek re-check collapse only, never open
The timer assigned centerSectionRevealHeld outright, so it opened the peek
from bar hover alone. A pointer resting on the left section that dipped off
the bar and returned inside 120ms left the timer pending with barHovered
true again, and the indicators revealed without the pointer ever touching
the center section.
Opening stays the center section's own gesture in setCenterSectionHovered.
The timer now only closes what that opened, and the test asserts the
invariant against the whole file rather than one helper body that never
had the offending assignment in it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Tally bar hover per monitor instead of sharing one flag
Every screen's bar wrote the same barHovered bool, last writer wins. Sliding
along the top edge from one monitor's bar to the next can deliver the enter
before the leave, leaving the flag false under a live pointer; the collapse
then fired on a peek the user was still hovering, and no further hover change
arrived to correct it until the pointer left and came back.
Counting each surface's hover makes the order irrelevant. A bar destroyed
mid-hover — unplugging a monitor — never sends a leave, so it hands its
tally back on destruction rather than holding the peek open for good.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Keep the bar mapped while hidden so revealing it is instant
Hiding the bar set the panel invisible, which unmaps the layer surface and
releases the scene graph with it. Every reveal then had to rebuild all of
it: a new layer surface, a configure roundtrip, re-shaped glyphs and
re-uploaded textures, and a first frame before anything appeared.
Measured on a 2560x1440 screen, showing took 155-175ms against 20ms to
hide, and 400-595ms on the first reveal after a cold start. Splitting the
cost showed the exclusive-zone reflow was not to blame: show latency was
the same on an empty workspace as on a tiled one, and windows finished
moving ~15ms after the bar was already on screen.
Park the bar one bar-width past its anchored edge instead, and drop its
exclusion zone while hidden. The surface stays alive, so showing is only
a margin change: 10-14ms in both directions, at every bar position.
Since a hidden bar is now mapped, layer_present no longer proves the bar
is visible; the session acceptance test asserts on-screen geometry.
* Fix layer visibility checks on offset monitors
* Handle rotated outputs in layer visibility checks
* Cover hidden bar behavior in acceptance tests
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
A bar surface is built per monitor, so panel routing had several live copies
of the same widget to choose from and took whichever registered its slot
first. Pick the one on the monitor Hyprland has focused instead, preferring
an already-open copy so hide and toggle still reach the visible panel.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every toggle you could only reach by mouse or panel hotkey is now
scriptable through omarchy-shell:
- omarchy.bluetooth toggleBluetooth — the radio (was right-click / B)
- omarchy.network toggleNetwork — Wi-Fi on/off (was W in the panel)
- omarchy.tailscale toggleTailscale — the connection as one call,
matching the widget's right-click, instead of separate up/down
- omarchy.clock toggleWeekStart — calendar week start (was W)
- shell toggleBarTransparency — the bar background (was manage UI only)
Bluetooth and network follow the power/monitor pattern: manageIpc: false
so the panel owns the target's single IpcHandler and can extend it past
the inherited lifecycle methods.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A shell.json write used to reassign the whole layout, and the module
Repeaters recreate every delegate when their array model changes — so
toggling an inline widget setting (battery percentage, clock format,
tray pinning) tore down and rebuilt every widget on every monitor,
closing any open panel along the way. When the layout structure is
unchanged, hand the new settings to the running widgets instead.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Give built-in plugins an honest on/off state
Every built-in reported itself enabled no matter what. A bar widget said
"enabled" while sitting nowhere near the bar, and disabling a built-in service
silently did nothing, because enabled meant "listed in plugins[]" and a
built-in never is. Nothing surfaced that, since the only caller listing plugins
was the CLI.
For a widget, on and off is its place in the bar, so listPlugins reports layout
membership -- what enable/disable actually toggles. For everything else built
in, loading by default is the right behaviour to keep, so switching one off is
recorded the other way round, in disabledPlugins[]. shell.json still carries
only the deviation from the defaults: the key is dropped the moment nothing is
switched off, leaving a config that never disabled anything byte-identical.
isEnabled still answers a separate question -- whether the component loads at
all -- and deliberately does not follow a widget out of the bar. omarchy.menu
is both a widget and the menu itself, so tying the two together would let
taking its button off the bar lock the menu out of the shell, with no way back
that isn't the CLI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Manage plugins from Setup > Plugins
Plugins were CLI-only. Setup > Plugins now offers Enable, Disable, Add, and
Remove, each list living in the menu itself so picking a row acts on it.
Enable and Disable cover the built-ins as well as anything installed -- the bar
widgets you can put in the bar, the services and overlays you can switch off.
Remove is limited to plugins the user installed, since a built-in has no
checkout to delete, and stays hidden until there is one. Whole-bar
replacements are left out; those are chosen under Style.
Enabling a bar widget asks for a section first, because enabling alone drops it
on the right and the only way to move it was a follow-up bar plugin move. The
CLI asks the same question after its own add, so both paths place a widget the
same way. Add and Remove run in a terminal: one needs a git URL and shows the
trust warning before cloning, the other deletes a checkout and prints where it
backed it up.
Providers grew two hooks for this. placementFor turns a row into a submenu
instead of an action, and volatile re-runs the enumeration when its submenu is
entered -- picking from these lists is what changes them, and rows a provider
no longer returns now drop out instead of lingering forever.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the plugin menu after review
Menu.qml carried its own shellQuote while already importing Util and calling
Util.shellQuote a few lines up; two copies of the same escaping is one place
for a future fix to miss. isDisabled walked the array by hand to compare values
it writes itself, and dropDisabled was an eight-line helper with one caller.
Two bugs came out of the same pass. A whole-bar replacement belongs under Style
rather than these lists, but the exclusion sat in the shared row builder, so a
third-party bar could be installed and never removed -- Remove would show an
empty list under a guard that said something was there. The exclusion now sits
on the two lists that mean it.
Rows are keyed by id, and distinct plugin ids can slugify alike: acme.foo,
acme_foo and acme-foo all give acme-foo. The merge keeps the first row per id,
so the rest simply vanished from the list with nothing to say why. Row ids are
now made distinct before merging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Pick a plugin the way we pick a theme
Setup > Plugins listed plugins as menu rows, which needed three providers, a
placement submenu, a volatile-refresh hook and a row-swap in the merge. Only
Font and Apps are built that way. Theme, Background, Unlock, Timezone and
Keybindings all pipe a list into omarchy-menu-select instead, which is one
action string and a small script -- so that is what these use now.
The trade is search: a plugin name is no longer findable from the root prompt.
Neither is a theme name or a timezone, and Enable Plugin still is, so the loss
sits where the rest of the menu already puts it.
Two pieces of the row machinery stay, because they are worth having for the
lists that remain. A volatile provider re-runs when its submenu is entered, so
a font installed since the shell started now shows up without restarting it,
and rows a provider stops returning drop out. Row ids are still made distinct
before merging: Fira Code and Fira-Code both slug to fira-code, and a repeated
id was silently dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let a picked option carry an icon
Moving the plugin lists onto omarchy-menu-select cost them their glyphs: the
select mode has always hardcoded an empty icon, which is why Timezone and
Keybindings have none either. An option may now lead with one, as
"<glyph><TAB><label>". The menu shows the glyph, filters on the label, and
hands the label back, so a caller never strips a glyph off its own selection
and a list of plain strings behaves exactly as before.
The plugin picker uses it for the puzzle glyph on each plugin and the align
glyphs on the sections, which also regain the capitals they lost when the
section names were passed through raw.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Switch bars by enabling one
A bar option was kept out of Enable and Disable on the grounds that picking
which bar to run belongs under Style -- but nothing under Style ever offered
it, so an installed bar could be added and removed and never actually put to
use. The menu was guarding a door to a room that was never built.
Enabling one is the switch. setEnabled already assigns bar.id for a bar
option, so a bar has always replaced the one before it; only the picker's
filter stood in the way. Dropping it costs nothing else, because enabled for a
bar option means active: the bar in use is the one row absent from Enable,
every other installed bar is one pick away, and the built-in is just another
entry, so going back to it is enabling Bar.
Disable keeps the exclusion. That is the one verb a bar cannot answer -- there
is no off, only a successor -- and offering it would have listed the built-in
bar on a stock system, where turning it off deletes a bar.id that was never
set and nothing happens.
A bar carries the bar glyph rather than the puzzle one, so a row that replaces
the whole bar does not read like one more widget to switch on, and enable now
says "Now using X as the bar" instead of "Enabled X", which understated a
whole-bar swap in both the enable and the freshly-added path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Refuse a plugin that declares a kind it cannot load
A kind is a promise to supply something to load, and the shell reads that
something from a fixed key: entryPoints.bar to draw a bar, entryPoints.menu to
open a menu. Nothing checked the promise. A manifest could claim kinds ["bar"]
with no bar entry point, pass validation, install, and enable -- and then the
bar would fall back to the built-in and the widget would be skipped, leaving a
plugin that does nothing, explained only by a console.warn nobody reads.
Our own plugins have been held to this table by plugins-test.sh all along.
This holds third-party ones to the same table, at add and update time, where
there is still someone to tell.
A kind outside the table is left alone rather than guessed at, so a shell that
learns a new kind does not need this list updated first. The cost is that a
misspelled kind still installs quietly.
omarchy-plugin-validate had no tests; it has some now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Act on the plugin whose row was picked
The picker showed a name and then looked that name up again across every
plugin, filtered set or not, taking the first match. Two plugins can share a
name: cloning one keeps the name it was cloned from, so the documented
`omarchy plugin clone omarchy.clock local.clock` leaves two plugins called
Clock. Enable listed the clone -- the built-in was already enabled, so only the
clone was eligible -- and then enabled omarchy.clock, moving the built-in
widget instead. Remove listed the clone and tried to delete a built-in that has
no checkout to delete.
A row now carries its id alongside its label, and the id is read back off the
row that was picked instead of being derived from the name a second time. Where
a name is not unique among the rows on offer, the label carries the id too, so
two rows that would both say Clock can be told apart at all -- which they could
not before, whichever one the pick resolved to.
The verb prompt only ever sees the first two fields, so the menu shows what it
always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Never ask a bar where to sit in the bar
A manifest may declare both bar and bar-widget, and validation accepts it. The
picker saw bar-widget, asked for a section, and passed it to enable. setEnabled
takes bar as the dominant kind: it writes bar.id and returns, adding nothing to
any layout, so the move that followed had no widget to find and failed -- after
the bar had already been switched. A partial success with an error on the way
out.
Bar wins ahead of bar-widget now, in the picker and in the placement prompt
`plugin add --enable` asks, so a bar is enabled without a placement it cannot
use. The CLI refuses a placement on a bar outright, before the bar is switched
rather than after, since `omarchy plugin enable <bar> --section left` could
reach the same half-applied state without going through either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Only replacement, no off
* Add default placement for bar widgets
* Simplify plugin menu actions
* Document plugin placement behavior
* Allow dropping widgets in empty bar space
* Treat plugin dependencies as runtime invariants
* Reject duplicate plugin ids on add
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The center section declares both an anchored and an unanchored
arrangement and shows whichever fits, but a hidden ModuleList is still a
loaded Loader. With a center anchor set — the default — every center
module was therefore mounted twice for the life of the session: two IPC
handlers registered for the same target, two clocks ticking, two of every
timer and network fetch behind them, one set of which nothing could
reach.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A center-anchored module is mounted twice: the copy that is drawn, and a
zero-size placeholder holding its place in the flow beside the anchor.
findPanelWidget returned whichever registered first, and that order is
not stable across a live bar reconfiguration, so a panel could open
anchored to the invisible copy -- mispositioned, with the drawn slot
never lighting up and switchPanelFrom unable to find it again.
The mark was also always 55% of the slot, which fits an icon but
underlines only a fraction of a text label, and runs the full height of a
multi-line module on a vertical bar. Modules can now say how long the
mark should be along the bar; anything that does not answer keeps the old
proportion.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
