* Give built-in plugins an honest on/off state
Every built-in reported itself enabled no matter what. A bar widget said
"enabled" while sitting nowhere near the bar, and disabling a built-in service
silently did nothing, because enabled meant "listed in plugins[]" and a
built-in never is. Nothing surfaced that, since the only caller listing plugins
was the CLI.
For a widget, on and off is its place in the bar, so listPlugins reports layout
membership -- what enable/disable actually toggles. For everything else built
in, loading by default is the right behaviour to keep, so switching one off is
recorded the other way round, in disabledPlugins[]. shell.json still carries
only the deviation from the defaults: the key is dropped the moment nothing is
switched off, leaving a config that never disabled anything byte-identical.
isEnabled still answers a separate question -- whether the component loads at
all -- and deliberately does not follow a widget out of the bar. omarchy.menu
is both a widget and the menu itself, so tying the two together would let
taking its button off the bar lock the menu out of the shell, with no way back
that isn't the CLI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Manage plugins from Setup > Plugins
Plugins were CLI-only. Setup > Plugins now offers Enable, Disable, Add, and
Remove, each list living in the menu itself so picking a row acts on it.
Enable and Disable cover the built-ins as well as anything installed -- the bar
widgets you can put in the bar, the services and overlays you can switch off.
Remove is limited to plugins the user installed, since a built-in has no
checkout to delete, and stays hidden until there is one. Whole-bar
replacements are left out; those are chosen under Style.
Enabling a bar widget asks for a section first, because enabling alone drops it
on the right and the only way to move it was a follow-up bar plugin move. The
CLI asks the same question after its own add, so both paths place a widget the
same way. Add and Remove run in a terminal: one needs a git URL and shows the
trust warning before cloning, the other deletes a checkout and prints where it
backed it up.
Providers grew two hooks for this. placementFor turns a row into a submenu
instead of an action, and volatile re-runs the enumeration when its submenu is
entered -- picking from these lists is what changes them, and rows a provider
no longer returns now drop out instead of lingering forever.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the plugin menu after review
Menu.qml carried its own shellQuote while already importing Util and calling
Util.shellQuote a few lines up; two copies of the same escaping is one place
for a future fix to miss. isDisabled walked the array by hand to compare values
it writes itself, and dropDisabled was an eight-line helper with one caller.
Two bugs came out of the same pass. A whole-bar replacement belongs under Style
rather than these lists, but the exclusion sat in the shared row builder, so a
third-party bar could be installed and never removed -- Remove would show an
empty list under a guard that said something was there. The exclusion now sits
on the two lists that mean it.
Rows are keyed by id, and distinct plugin ids can slugify alike: acme.foo,
acme_foo and acme-foo all give acme-foo. The merge keeps the first row per id,
so the rest simply vanished from the list with nothing to say why. Row ids are
now made distinct before merging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Pick a plugin the way we pick a theme
Setup > Plugins listed plugins as menu rows, which needed three providers, a
placement submenu, a volatile-refresh hook and a row-swap in the merge. Only
Font and Apps are built that way. Theme, Background, Unlock, Timezone and
Keybindings all pipe a list into omarchy-menu-select instead, which is one
action string and a small script -- so that is what these use now.
The trade is search: a plugin name is no longer findable from the root prompt.
Neither is a theme name or a timezone, and Enable Plugin still is, so the loss
sits where the rest of the menu already puts it.
Two pieces of the row machinery stay, because they are worth having for the
lists that remain. A volatile provider re-runs when its submenu is entered, so
a font installed since the shell started now shows up without restarting it,
and rows a provider stops returning drop out. Row ids are still made distinct
before merging: Fira Code and Fira-Code both slug to fira-code, and a repeated
id was silently dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let a picked option carry an icon
Moving the plugin lists onto omarchy-menu-select cost them their glyphs: the
select mode has always hardcoded an empty icon, which is why Timezone and
Keybindings have none either. An option may now lead with one, as
"<glyph><TAB><label>". The menu shows the glyph, filters on the label, and
hands the label back, so a caller never strips a glyph off its own selection
and a list of plain strings behaves exactly as before.
The plugin picker uses it for the puzzle glyph on each plugin and the align
glyphs on the sections, which also regain the capitals they lost when the
section names were passed through raw.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Switch bars by enabling one
A bar option was kept out of Enable and Disable on the grounds that picking
which bar to run belongs under Style -- but nothing under Style ever offered
it, so an installed bar could be added and removed and never actually put to
use. The menu was guarding a door to a room that was never built.
Enabling one is the switch. setEnabled already assigns bar.id for a bar
option, so a bar has always replaced the one before it; only the picker's
filter stood in the way. Dropping it costs nothing else, because enabled for a
bar option means active: the bar in use is the one row absent from Enable,
every other installed bar is one pick away, and the built-in is just another
entry, so going back to it is enabling Bar.
Disable keeps the exclusion. That is the one verb a bar cannot answer -- there
is no off, only a successor -- and offering it would have listed the built-in
bar on a stock system, where turning it off deletes a bar.id that was never
set and nothing happens.
A bar carries the bar glyph rather than the puzzle one, so a row that replaces
the whole bar does not read like one more widget to switch on, and enable now
says "Now using X as the bar" instead of "Enabled X", which understated a
whole-bar swap in both the enable and the freshly-added path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Refuse a plugin that declares a kind it cannot load
A kind is a promise to supply something to load, and the shell reads that
something from a fixed key: entryPoints.bar to draw a bar, entryPoints.menu to
open a menu. Nothing checked the promise. A manifest could claim kinds ["bar"]
with no bar entry point, pass validation, install, and enable -- and then the
bar would fall back to the built-in and the widget would be skipped, leaving a
plugin that does nothing, explained only by a console.warn nobody reads.
Our own plugins have been held to this table by plugins-test.sh all along.
This holds third-party ones to the same table, at add and update time, where
there is still someone to tell.
A kind outside the table is left alone rather than guessed at, so a shell that
learns a new kind does not need this list updated first. The cost is that a
misspelled kind still installs quietly.
omarchy-plugin-validate had no tests; it has some now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Act on the plugin whose row was picked
The picker showed a name and then looked that name up again across every
plugin, filtered set or not, taking the first match. Two plugins can share a
name: cloning one keeps the name it was cloned from, so the documented
`omarchy plugin clone omarchy.clock local.clock` leaves two plugins called
Clock. Enable listed the clone -- the built-in was already enabled, so only the
clone was eligible -- and then enabled omarchy.clock, moving the built-in
widget instead. Remove listed the clone and tried to delete a built-in that has
no checkout to delete.
A row now carries its id alongside its label, and the id is read back off the
row that was picked instead of being derived from the name a second time. Where
a name is not unique among the rows on offer, the label carries the id too, so
two rows that would both say Clock can be told apart at all -- which they could
not before, whichever one the pick resolved to.
The verb prompt only ever sees the first two fields, so the menu shows what it
always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Never ask a bar where to sit in the bar
A manifest may declare both bar and bar-widget, and validation accepts it. The
picker saw bar-widget, asked for a section, and passed it to enable. setEnabled
takes bar as the dominant kind: it writes bar.id and returns, adding nothing to
any layout, so the move that followed had no widget to find and failed -- after
the bar had already been switched. A partial success with an error on the way
out.
Bar wins ahead of bar-widget now, in the picker and in the placement prompt
`plugin add --enable` asks, so a bar is enabled without a placement it cannot
use. The CLI refuses a placement on a bar outright, before the bar is switched
rather than after, since `omarchy plugin enable <bar> --section left` could
reach the same half-applied state without going through either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Only replacement, no off
* Add default placement for bar widgets
* Simplify plugin menu actions
* Document plugin placement behavior
* Allow dropping widgets in empty bar space
* Treat plugin dependencies as runtime invariants
* Reject duplicate plugin ids on add
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both services fire one status poll when the shell starts, but after a fresh
boot that lands before tailscaled has connected or dropboxd has finished its
respawn dance, leaving the bar icons stale for a full 30s/60s refresh
interval. Re-poll every 2s until the service shows up (or ~30s pass), then
hand off to the normal periodic refresh.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Each panel's hero on/off toggle (Tailscale, Dropbox Wi-Fi, Bluetooth,
network, audio mute) now has a reachable "header" cursor section, a focus
ring around the hero icon, Enter/Space activation, a letter shortcut, and
hover parity. The hero is inset by heroRingPad so the ring stays inside
the Flickable/ScrollView clip box instead of being cut off.
Bluetooth and audio get a virtual "header" section above their device
sections, so the adapter/mute can be toggled by keyboard even when no
device rows exist. Network repurposes its previously dead header section.
For the PanelHero-based panels (Tailscale, Dropbox), route panel state
through the wrapper's `header` id: inside a PanelHero iconComponent `root`
resolves to PanelHero, not the Panel, so `root.headerHasCursor` and
`root.setHeaderCursor()` silently referenced the wrong object.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Click the Dropbox hero icon to pause or resume the daemon (dropbox-cli
stop/start), with a tooltip on hover. When paused, both the hero and the
bar icon grey out and the phrase reads "Syncing paused". The greying is
optimistic so it reacts the instant you click, then reconciles with the
real daemon state once it settles (reverting if the command failed).
Also fix status.py's running detection, which was stuck reporting true:
this dropbox-cli inverts the `running` exit code and reports "isn't
running" (not "not running") when stopped, so the paused state never
showed. Detection now keys off the status text alone.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
