Providers never returned JSON rows: they are shell-defined row sources
emitting tab-delimited lines, and extensions cannot declare new names.
bar.shellQuote moved to Util.qml, and the UpperCamelCase widget id
migration no longer exists.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Hide the keyboard layout widget on a single-layout install
There is nothing to read or switch when only one layout is configured, so the
label is noise on the bar most people have. Hide it until the keyboard reports
more than one, and keep showing it on a Hyprland that doesn't report the list
at all rather than hiding the widget everywhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put the keyboard layout widget on the bar by default
The widget hides itself unless the active keyboard has more than one layout,
so shipping it costs a single-layout machine nothing and saves everyone else
from finding it in the plugin list. Sit it just right of the clock, and add it
to existing bars the way the agents widget was added, leaving a curated bar
and a disabled widget alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Cycle the layout with the hyprctl command that exists
switchxkblayout is a hyprctl command, not a dispatcher, so sending it over the
dispatch socket only produced a Lua syntax error and clicking the widget did
nothing. Run it instead, against the keyboard the label was read from.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add an idempotent bar add command
Nothing put a widget on the bar without going through the running shell:
plugin enable and bar move both forward to it over IPC, which a migration
cannot rely on. Add writes the config file the way position and transparent
already do, and leaves a widget that is already on the bar where the user put
it, so callers can ask for it repeatedly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put the keyboard layout widget on bars through the bar CLI
The hand-written jq was a normalizer, a presence check and a splice for what
is now one command that carries all three.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep bar add from writing a bar the shell was not reading
The shell takes a user shell.json only when it parses, says version 1, and
carries a bar layout, and does not deep-merge; anything else leaves the
shipped defaults on screen. Reading and writing the user file regardless
turned a config holding nothing but an idle timeout into a bar holding
nothing but the new widget, and made an unparsable one abort the migration
chain on every update. Work against whichever layout is actually in effect,
seeding the defaults before placing a widget they do not already carry.
A malformed hand-installed manifest fails the whole plugin catalog, which was
enough to refuse a first-party widget, so treat an unreadable catalog as no
answer rather than a no. Leave a widget listed in disabledPlugins off the bar
instead of writing a layout entry the registry refuses to load, and re-check
presence inside the mutation so two adds cannot both miss it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Read a widget's default bar section in one place
cmd_defaults spelled out the same "defaultSection, or center when it is
missing or not a section" rule that the add path already asks for by name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Rename bar add to bar put
'omarchy plugin add' installs a plugin and 'omarchy bar add' placed one that
was already installed, which is too much meaning for one verb.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Place a newly added bar widget with bar put
plugin add reached the bar through plugin enable, which forwards to the
running shell, so it first had to poll until the shell noticed the clone and
then failed outright when no shell was there to ask. Putting a widget on the
bar is a config edit, so do that directly and leave plugin enable to the
plugins that need registering rather than placing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put bar widgets through the shell instead of the config file
Placing a widget existed twice: once in PluginRegistry, which the shell uses
and owns the config it holds in memory, and once as jq against shell.json.
The second was there so migrations could run without a shell, which they do
not need to: the Quattro upgrade hands over the shipped shell.json before it
runs any, and every other path runs inside a session with a shell up. Ask the
shell, and say so and carry on when there is none to ask.
putBarWidget enables only what is not already on the bar, which is what a
caller that cannot know whether it ran before needs, and is the one thing the
existing enable path would not do.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add agent usage collectors that write display-ready data files
One omarchy-agent-usage-scan-<agent> collector per AI coding agent prints a
complete display-ready usage record — identity, tier, status, rate limits,
and today/week/all-time stats. omarchy-agent-usage-update runs every
collector it finds and writes the records atomically to
~/.local/state/omarchy/agents/usage/, so anything that displays usage only
ever reads JSON from there.
The Claude collector absorbs what the shell previously did in-process:
transcript scanning, the stats-cache/history fallback, credentials parsing,
and the OAuth limits probe, now with a probe throttle and last-good limits
kept across network failures. The Codex collector is the existing scanner
reshaped to the shared record contract.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Redo the model-usage plugin as omarchy.agents watching usage data files
The panel is now strictly a display. It discovers the JSON records that
omarchy-agent-usage-update maintains under
~/.local/state/omarchy/agents/usage/, watches them for changes, and draws
whatever appears — so adding an agent means shipping a collector, never
touching the panel. Marks resolve by convention (assets/<id>.svg with an
optional -light twin), the limits meters read a generic limits array, and
the per-provider QML adapters and in-plugin scanner scripts are gone.
Cross-device sync aggregation stays in the shell and keeps the snapshot
field names older versions wrote, so mixed-version fleets still merge in
both directions.
With the provider fan-out gone, the widget takes its real name: the plugin
id becomes omarchy.agents. A migration renames it wherever a user's config
mentions it — layout entries keep their settings and position, a disabled
widget stays disabled — then primes the data files once and drops the old
scanner cache. The migration test also drops a stale assertion that expected
migrations to restart the shell themselves, which c992cdff moved to
omarchy update.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Address Codex review: synced-only tabs, limits retry, history fallback
Three data-availability gaps from review. An agent whose records only exist
in synced snapshots — a collector installed on just one machine — now gets
its tab by unioning the synced aggregate into the provider list, with rate
limits blank since those never travel. A Claude limits probe that reaches no
server at all writes retryAdvised into its record, and the shell honors it
with one 30-second retry instead of waiting out the full refresh interval,
restoring the old boot-before-DHCP behavior. And a machine with only
history.jsonl — no transcripts, no stats-cache — still reports today's
prompt and session counts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Address second Codex pass: history-only visibility, targeted retries
Today's prompt and session counts now count toward an agent's presence in
the bar, so a machine whose only Claude source is history.jsonl shows up
without waiting for limits. And the 30-second limits retry passes the
advising agent ids to the updater, so an outage at one provider no longer
puts every other collector on a retry treadmill.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop omarchy-cmd-present jq guards from the agents migrations
jq ships in the default package set, which makes it a runtime invariant per
AGENTS.md — call it directly. The migration tests lose their now-unused
omarchy-cmd-present stubs with it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the scan infix from the collector command names
Collectors are omarchy-agent-usage-<agent>; the updater skips its own name
when globbing them, and the update test proves it with a decoy.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep the credential store out of the printed usage record
The Claude collector now reads .credentials.json once into three scalars —
the access token, its expiry, and the plan label — instead of passing the
parsed store around. The token reaches nothing but the Authorization header
of the limits probe, and only the plan label may travel into the record,
which is what CodeQL's clear-text-logging alert on the record print was
unable to see when the whole dict flowed through.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The widget hid itself well enough that nobody found it: it only ever
appeared if you knew the id and ran `omarchy bar plugin add`, since it was
in neither the shipped layout nor any migration.
Defaulting it on costs nothing on machines that don't use it. Panel.qml is
`visible: providers.length > 0`, and Main.qml only counts a provider that
is enabled and has actually recorded prompts, sessions, active days, or a
rate limit. A box that has never run Claude Code or Codex draws an empty
bar item, and the icon arrives on its own at the first scan that finds
usage — which is the behavior the widget already advertised.
The migration skips any config that already lists the widget in any
section, so a curated bar keeps its own placement rather than gaining a
second copy.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
It was the user override file for the first Quickshell bar, back when the
bar layered it over bar-defaults.json. Unifying everything into
shell.json left an empty file that installs and the quattro upgrade kept
faithfully copying around.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Moving them ahead of the clock left the old entry in place, so a fresh
config rendered the widget on both sides of the time.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The lineup now reads toward the clock instead of away from it, so Stay
Awake sits nearest the time, then do-not-disturb, night light, reminder,
screen recording, dictation, and tmux alerts trailing off to the left.
Active indicators render after the hover-revealed ones so they stay
against the clock, and a newly active indicator joins on the far side
rather than shoving the ones already showing sideways.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The canonical colors.toml keys are now background/foreground, including
all permutations (dark_background, darker_background, lighter_background,
dark_foreground, light_foreground, bright_foreground). The old short
names are gone entirely, not kept as aliases; legacy alacritty-generated
themes still resolve through the ANSI color0/color7 fallback.
Theme files are also regrouped: accent/selection/muted first, then the
backgrounds, then the foregrounds, then the named colors.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
With bin/omarchy-menu gone there's no caller that summons the menu by
writing a JSON tempfile and polling a done file. Drop everything that
existed only to support that handshake:
- menuJsonFile / menuJsonFileView / loadMenuJson / openMenu(json,...)
- pendingSelectionFile / pendingDoneFile / selectionFile / doneFile
- mergeProviderJson (the JSON-wrapper for provider output)
- applyProc / releaseProc / doneFilesToRelease / finishDoneFile /
releaseNextDoneFile / resetRequest / requestActive / closeMenu
- the menuBin property pointing at the deleted bin
applySelected is now four lines (close + execDetached); cancel is two
(close + clear filter). open() takes either {menu: id} or a bare initial
menu name, and hands off to openExistingMenu which uses the cached items
from the JSONC FileViews.
Net: 91 lines smaller, no perf change.
Fires after the channel template is copied to /etc/pacman.conf and before
`pacman -Syyuu` runs, letting users layer custom Pacman repositories or
IgnorePkg directives onto the freshly-written config so they're respected
by the upgrade. Useful for users running on overlay distros (CachyOS,
Chaotic-AUR, internal company repos) where a wipe-and-reinstall would
otherwise pull vanilla Arch versions.
Ships with `pre-refresh-pacman.d/add-custom-repo.sample` showing the
pattern.
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Some users may choose to disable notification timeout for normal-level
notifications to ensure no notifications are missed when the user is
away from the screen. However, there are several Omarchy notifications
that only serve as an immediate feedback for a user action, such as
"Screensaver enabled" or "Editing config file foo.conf", for which
disabling the timeout is not desirable. This commit drops the urgency
level for such notification to low, allowing configuring a different
timeout value for them.
Notifications with an explicitly set timeout are excluded from this
commit.
