* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Send files to a tailnet machine with Taildrop
The panel gets a send button next to the copy one on every machine that
Tailscale grades as a Taildrop target, and `s` does the same from the
keyboard. Picking runs through the XDG portal chooser, so it looks like
the file dialog every other app opens.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Save incoming Taildrop files and say so
Linux keeps Taildrop files in the daemon's inbox until someone asks for
them, so nothing arrived until you ran `tailscale file get` by hand. A
user service now stages each delivery next to the downloads directory,
hands it over under a free name, and announces it — with a preview when
it's an image, and a click to open it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Float every portal dialog, not just the titled ones
The portal only ever shows dialogs, and the title regex missed any
chooser an app names something else — ours included.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Re-run the Taildrop enable now that the unit ships
The unit was never installed to /usr/lib/systemd/user/, so the enable had
nothing to act on and machines that already ran the migration carry a marker
for a no-op. Rename it so they get a working pass, and report what systemctl
says instead of a bare failure line.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wait for the file chooser on the connection that asked for it
The portal answers a request with a Response signal directed at the connection
that made it, and dbus-daemon delivers directed signals only to that
connection. gdbus monitor registers with AddMatch rather than BecomeMonitor, so
it never saw the reply: every pick left omarchy-file-select blocked on a read
that could not arrive, taking omarchy-tailscale-send down with it before it
reached either its notification or the transfer.
Make the call and wait for the signal on one connection, and give up after ten
minutes so an unanswered dialog cannot strand the caller.
Drop the "Sending to" notification while here, so a send reports once.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Mark Taildrop notifications with the panel's send glyph
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop a hung tailscale poll from freezing the panel
Each poll is skipped while its own process is still running, so one that never
exits leaves the panel showing whatever it last read, for good: the peer list
keeps a woken machine missing, and opening the panel cannot help because open
runs the same refresh that hits the same guard.
Reap anything still running fifteen seconds after a refresh, well inside the
thirty second interval, so the next tick starts clean.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Place a moved widget where an added one lands
'move omarchy.media left' named a section, not a slot, but the section went
through as an explicit target, which resolves a missing index by appending. The
widget landed on the far end of the row instead of after the section anchor
where 'add' puts it.
Its test has never run: the assertion covering this went in four hours after an
unrelated layout change had already stopped the file, and the runner stops the
whole suite at the first failure.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the config test from failing on things it is not about
The center layout assertion pinned the whole row, so parking the indicators
left of the clock broke a test named for update sitting next to weather. Assert
that adjacency instead.
The package-defaults check reads PKGBUILDs from the omarchy-pkgs repo and blew
up with a traceback wherever that is not a sibling checkout. Skip it when the
checkout is absent, honour OMARCHY_PKGS_ROOT when it is somewhere else, and
keep failing when it is present and wrong.
Between them these stopped the suite eighty files early.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the file chooser a Python command rather than a bash host for one
The portal work was a heredoc wedged inside a bash script that existed only to
parse two flags. Drop the host: argparse covers the flags, and the file says at
the top why it is the one command here not written in bash.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Tell a chooser that never opened apart from one that was dismissed
Three fixes from review:
The poll watchdog rearmed on every refresh, so a refresh interval shorter than
its timeout — the setting goes down to five seconds — pushed the deadline ahead
of a hung process forever. Arm it on the launch that needs watching and leave
it alone.
omarchy-file-select exited 1 both for nothing picked and for a chooser that
could not run, and omarchy-tailscale-send read it through a process
substitution, which drops the status anyway. A session bus that was not there
looked exactly like someone changing their mind. Separate the two exits and
read them with a command substitution.
Delivery picked a free name and then renamed, which overwrites anything that
takes the name in between. Link to the name instead: link(2) refuses one that
is taken, so the check and the claim are the same step.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both services fire one status poll when the shell starts, but after a fresh
boot that lands before tailscaled has connected or dropboxd has finished its
respawn dance, leaving the bar icons stale for a full 30s/60s refresh
interval. Re-poll every 2s until the service shows up (or ~30s pass), then
hand off to the normal periodic refresh.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Each panel's hero on/off toggle (Tailscale, Dropbox Wi-Fi, Bluetooth,
network, audio mute) now has a reachable "header" cursor section, a focus
ring around the hero icon, Enter/Space activation, a letter shortcut, and
hover parity. The hero is inset by heroRingPad so the ring stays inside
the Flickable/ScrollView clip box instead of being cut off.
Bluetooth and audio get a virtual "header" section above their device
sections, so the adapter/mute can be toggled by keyboard even when no
device rows exist. Network repurposes its previously dead header section.
For the PanelHero-based panels (Tailscale, Dropbox), route panel state
through the wrapper's `header` id: inside a PanelHero iconComponent `root`
resolves to PanelHero, not the Panel, so `root.headerHasCursor` and
`root.setHeaderCursor()` silently referenced the wrong object.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The hero icon is now the optimistic on/off toggle with a tooltip,
replacing the connect block and the progress lines beneath the hero.
The disconnected cross is drawn grey rather than red, and action
errors expire after a couple of seconds instead of sticking forever.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The omarchy-bar command had grown three overlapping ways to inspect the
bar (show/layout/list/options, plus selected/active/available/widgets
aliases) and mixed layout mutation in with bar-level settings. Untangle
it into two focused commands:
- omarchy-bar keeps only the bar-level settings that write shell.json:
use, reset, position, transparent, and settings. reset now delegates
to `use omarchy.bar` rather than duplicating the del(.bar.id) write.
- omarchy-bar-plugin owns all layout mutation: add, move, remove, set,
and replace, with the placement flags and jq resolve/anchor helpers.
`omarchy bar plugin ...` routes here via the dispatcher.
Drop the inspection commands entirely: the layout is visible on the bar,
the config is shell.json, and widget/option ids come from
`omarchy plugin list`. Nothing consumed the show output programmatically
except tests. This also removes omarchy-bar-position, whose jq write was
a duplicate of `omarchy bar position`.
Strip environment-invariant guards (require_command, require_omarchy_path)
that defended against jq or OMARCHY_PATH being absent — neither happens on
a real system. Keep the user-input validation (--section/--index) and the
atomic shell.json write.
Update callers (service install/remove, refresh-shell, plugin-clone,
plugin enable), keybindings, the menu, tests, and docs to the new split.
The `Bar` uses a `Repeater` when building out the models. This has the
effect of marshalling the configuration, and causing JSON arrays to
become sequence wrappers.
A couple of the plugins had been checking for the existence of array
values with `Array.isArray`, which fails for the sequence wrappers,
causing the values to be ignored. This breaks associated functionality
(the "hide" and "pin" actions in the systray had stopped working, as had
exit node selection in Tailscale).
Switching the guards to use `instanceof Array` works correctly for
sequence values (as well as arrays).
omarchy-plugin mixed plugin lifecycle, clone/edit, and bar-layout mutation.
The bar layout was mutated by two separate engines (an embedded Python
mutate_bar here and jq in omarchy-config-shell-bar), each with its own
manifest walker.
- omarchy-plugin is now a ~220-line router; clone and edit move to
omarchy-plugin-clone and omarchy-plugin-edit, matching the existing
plugin-{source,add,update,remove,available,validate,scan} sibling pattern
- omarchy-config-shell-bar is replaced by omarchy-bar, the single bar engine
(show/layout/list/options/use/reset/add/move/remove/set/replace/position/
transparent/settings) with one jq pipeline; the Python mutate_bar and its
python3 dependency are gone
- omarchy-plugin-catalog is the shared manifest scanner used by omarchy-bar
(widget/option enumeration, add validation) and omarchy-plugin-clone
(source enumeration), replacing three find|jq re-implementations
- service install/remove and refresh-shell call omarchy-bar; docs and tests
updated to the new command surface
