Add right-click handling to the notification card MouseArea so users
can manually dismiss notifications by right-clicking on them.
Previously, only left-click was handled (which triggered the default
action). Now right-click emits closeRequested() to dismiss the popup.
Co-authored-by: taxin <unknownbrofrombd@duck.com>
* Show OSD and sync touchpad steps when scrolling bar widgets
Scrolling the volume or brightness icon in the bar changed the value
directly without ever calling omarchy-osd, so only the keyboard media
keys showed the popup. On top of that, a touchpad's stream of many
small wheel events per finger-drag wasn't matched to a mouse's single
±120 notch per click, so touchpad scrolling felt uncoordinated and
uneven next to the keyboard/mouse behavior.
- shell/plugins/panels/audio/Panel.qml: accumulate raw wheel delta and
only apply a step once it crosses a full mouse-notch's worth, so
touchpad and mouse move the volume in identical 5% increments, and
ping the OSD each time a step actually lands.
- shell/plugins/panels/monitor/Panel.qml: same accumulator for
brightness, with a 5% floor so scrolling down can never blank the
screen.
- shell/plugins/osd/Osd.qml: animate the progress bar's width instead
of snapping, so successive steps glide smoothly.
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Fix bar wheel OSD behavior
* Normalize scaled wheel events
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Give built-in plugins an honest on/off state
Every built-in reported itself enabled no matter what. A bar widget said
"enabled" while sitting nowhere near the bar, and disabling a built-in service
silently did nothing, because enabled meant "listed in plugins[]" and a
built-in never is. Nothing surfaced that, since the only caller listing plugins
was the CLI.
For a widget, on and off is its place in the bar, so listPlugins reports layout
membership -- what enable/disable actually toggles. For everything else built
in, loading by default is the right behaviour to keep, so switching one off is
recorded the other way round, in disabledPlugins[]. shell.json still carries
only the deviation from the defaults: the key is dropped the moment nothing is
switched off, leaving a config that never disabled anything byte-identical.
isEnabled still answers a separate question -- whether the component loads at
all -- and deliberately does not follow a widget out of the bar. omarchy.menu
is both a widget and the menu itself, so tying the two together would let
taking its button off the bar lock the menu out of the shell, with no way back
that isn't the CLI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Manage plugins from Setup > Plugins
Plugins were CLI-only. Setup > Plugins now offers Enable, Disable, Add, and
Remove, each list living in the menu itself so picking a row acts on it.
Enable and Disable cover the built-ins as well as anything installed -- the bar
widgets you can put in the bar, the services and overlays you can switch off.
Remove is limited to plugins the user installed, since a built-in has no
checkout to delete, and stays hidden until there is one. Whole-bar
replacements are left out; those are chosen under Style.
Enabling a bar widget asks for a section first, because enabling alone drops it
on the right and the only way to move it was a follow-up bar plugin move. The
CLI asks the same question after its own add, so both paths place a widget the
same way. Add and Remove run in a terminal: one needs a git URL and shows the
trust warning before cloning, the other deletes a checkout and prints where it
backed it up.
Providers grew two hooks for this. placementFor turns a row into a submenu
instead of an action, and volatile re-runs the enumeration when its submenu is
entered -- picking from these lists is what changes them, and rows a provider
no longer returns now drop out instead of lingering forever.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the plugin menu after review
Menu.qml carried its own shellQuote while already importing Util and calling
Util.shellQuote a few lines up; two copies of the same escaping is one place
for a future fix to miss. isDisabled walked the array by hand to compare values
it writes itself, and dropDisabled was an eight-line helper with one caller.
Two bugs came out of the same pass. A whole-bar replacement belongs under Style
rather than these lists, but the exclusion sat in the shared row builder, so a
third-party bar could be installed and never removed -- Remove would show an
empty list under a guard that said something was there. The exclusion now sits
on the two lists that mean it.
Rows are keyed by id, and distinct plugin ids can slugify alike: acme.foo,
acme_foo and acme-foo all give acme-foo. The merge keeps the first row per id,
so the rest simply vanished from the list with nothing to say why. Row ids are
now made distinct before merging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Pick a plugin the way we pick a theme
Setup > Plugins listed plugins as menu rows, which needed three providers, a
placement submenu, a volatile-refresh hook and a row-swap in the merge. Only
Font and Apps are built that way. Theme, Background, Unlock, Timezone and
Keybindings all pipe a list into omarchy-menu-select instead, which is one
action string and a small script -- so that is what these use now.
The trade is search: a plugin name is no longer findable from the root prompt.
Neither is a theme name or a timezone, and Enable Plugin still is, so the loss
sits where the rest of the menu already puts it.
Two pieces of the row machinery stay, because they are worth having for the
lists that remain. A volatile provider re-runs when its submenu is entered, so
a font installed since the shell started now shows up without restarting it,
and rows a provider stops returning drop out. Row ids are still made distinct
before merging: Fira Code and Fira-Code both slug to fira-code, and a repeated
id was silently dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let a picked option carry an icon
Moving the plugin lists onto omarchy-menu-select cost them their glyphs: the
select mode has always hardcoded an empty icon, which is why Timezone and
Keybindings have none either. An option may now lead with one, as
"<glyph><TAB><label>". The menu shows the glyph, filters on the label, and
hands the label back, so a caller never strips a glyph off its own selection
and a list of plain strings behaves exactly as before.
The plugin picker uses it for the puzzle glyph on each plugin and the align
glyphs on the sections, which also regain the capitals they lost when the
section names were passed through raw.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Switch bars by enabling one
A bar option was kept out of Enable and Disable on the grounds that picking
which bar to run belongs under Style -- but nothing under Style ever offered
it, so an installed bar could be added and removed and never actually put to
use. The menu was guarding a door to a room that was never built.
Enabling one is the switch. setEnabled already assigns bar.id for a bar
option, so a bar has always replaced the one before it; only the picker's
filter stood in the way. Dropping it costs nothing else, because enabled for a
bar option means active: the bar in use is the one row absent from Enable,
every other installed bar is one pick away, and the built-in is just another
entry, so going back to it is enabling Bar.
Disable keeps the exclusion. That is the one verb a bar cannot answer -- there
is no off, only a successor -- and offering it would have listed the built-in
bar on a stock system, where turning it off deletes a bar.id that was never
set and nothing happens.
A bar carries the bar glyph rather than the puzzle one, so a row that replaces
the whole bar does not read like one more widget to switch on, and enable now
says "Now using X as the bar" instead of "Enabled X", which understated a
whole-bar swap in both the enable and the freshly-added path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Refuse a plugin that declares a kind it cannot load
A kind is a promise to supply something to load, and the shell reads that
something from a fixed key: entryPoints.bar to draw a bar, entryPoints.menu to
open a menu. Nothing checked the promise. A manifest could claim kinds ["bar"]
with no bar entry point, pass validation, install, and enable -- and then the
bar would fall back to the built-in and the widget would be skipped, leaving a
plugin that does nothing, explained only by a console.warn nobody reads.
Our own plugins have been held to this table by plugins-test.sh all along.
This holds third-party ones to the same table, at add and update time, where
there is still someone to tell.
A kind outside the table is left alone rather than guessed at, so a shell that
learns a new kind does not need this list updated first. The cost is that a
misspelled kind still installs quietly.
omarchy-plugin-validate had no tests; it has some now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Act on the plugin whose row was picked
The picker showed a name and then looked that name up again across every
plugin, filtered set or not, taking the first match. Two plugins can share a
name: cloning one keeps the name it was cloned from, so the documented
`omarchy plugin clone omarchy.clock local.clock` leaves two plugins called
Clock. Enable listed the clone -- the built-in was already enabled, so only the
clone was eligible -- and then enabled omarchy.clock, moving the built-in
widget instead. Remove listed the clone and tried to delete a built-in that has
no checkout to delete.
A row now carries its id alongside its label, and the id is read back off the
row that was picked instead of being derived from the name a second time. Where
a name is not unique among the rows on offer, the label carries the id too, so
two rows that would both say Clock can be told apart at all -- which they could
not before, whichever one the pick resolved to.
The verb prompt only ever sees the first two fields, so the menu shows what it
always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Never ask a bar where to sit in the bar
A manifest may declare both bar and bar-widget, and validation accepts it. The
picker saw bar-widget, asked for a section, and passed it to enable. setEnabled
takes bar as the dominant kind: it writes bar.id and returns, adding nothing to
any layout, so the move that followed had no widget to find and failed -- after
the bar had already been switched. A partial success with an error on the way
out.
Bar wins ahead of bar-widget now, in the picker and in the placement prompt
`plugin add --enable` asks, so a bar is enabled without a placement it cannot
use. The CLI refuses a placement on a bar outright, before the bar is switched
rather than after, since `omarchy plugin enable <bar> --section left` could
reach the same half-applied state without going through either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Only replacement, no off
* Add default placement for bar widgets
* Simplify plugin menu actions
* Document plugin placement behavior
* Allow dropping widgets in empty bar space
* Treat plugin dependencies as runtime invariants
* Reject duplicate plugin ids on add
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The widget hid itself well enough that nobody found it: it only ever
appeared if you knew the id and ran `omarchy bar plugin add`, since it was
in neither the shipped layout nor any migration.
Defaulting it on costs nothing on machines that don't use it. Panel.qml is
`visible: providers.length > 0`, and Main.qml only counts a provider that
is enabled and has actually recorded prompts, sessions, active days, or a
rate limit. A box that has never run Claude Code or Codex draws an empty
bar item, and the icon arrives on its own at the first scan that finds
usage — which is the behavior the widget already advertised.
The migration skips any config that already lists the widget in any
section, so a curated bar keeps its own placement rather than gaining a
second copy.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The panel drove a Flickable by hand: two Repeaters in a Column, plus an
ensureCursorVisible() that mapped each row into content coordinates and
moved contentY itself. That is the machinery a ListView already has, and
the hand-rolled version came with a 6px margin that scrolled the list
whenever the mouse merely rested near the viewport edge.
Flatten the remembered and discovered groups into one model whose entries
carry the section they came from, and let the view keep the current row
visible. Section headers are computed per index the way the network panel
does it. The cursor keeps working in section-relative terms, so
activation, forget, hover, and the hero toggle are untouched.
Positioning has to be deferred a turn: called straight out of
onCurrentIndexChanged it silently does nothing, because the model is
rebuilt every time discovery reports and the swap resets the view out
from under the call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The shell starts before DHCP finishes, so Claude's first probe of the
OAuth usage endpoint came back as a transport failure and pinned "Claude
limits unavailable" for a full refresh interval. Opening the panel could
not clear it either: the open path refreshed unforced and hit the same
throttle it was trying to escape.
A transport failure now arms a short retry that goes straight to the
probe, since a retry answering to the throttle never gets off the
ground. Any real answer disarms it — a server that replied, 429
included, is one to stop pestering. Probes are single-flight, a fresh
token skips the throttle its predecessor set, and opening the panel asks
for the wire without re-walking every transcript on disk.
The module also earns its place in the bar now instead of sitting there
dimmed with nothing to say: it collapses out entirely until a provider
has actually recorded usage, here or on a synced machine. That made both
presence probes redundant, so they are gone. Selection follows the
provider rather than its slot, so one appearing while the panel is open
no longer swaps out what you were reading.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Clipboard history is fed by two wl-paste --watch processes started once
when the shell loads. When one dies, nothing notices: copying still
works, the picker still opens, and the old entries are all still there,
so history just silently stops recording until the next shell reload.
Respawn them on exit instead. The one-shot timer both coalesces the case
where both watchers die together and keeps a wl-paste that cannot start
at all from spinning as fast as fork allows.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The hero switch is the panel's on/off, so it now carries output and input
together rather than output alone. It reads as on while anything is still
audible, which keeps muting a single channel from flipping the master switch.
Right-clicking a volume bar mutes just that channel -- output, input, or one
app's stream -- matching what the `m` key already does for the focused row.
Only channels that exist get a vote: a machine with no default source would
otherwise report its input unmuted forever, leaving the switch able to mute but
never to unmute.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both sides tightened the same center-layout assertion. Taking quattro's:
it asserts the weather/update adjacency the test name is about instead of
pinning the whole row, which is what kept breaking it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The center section declares both an anchored and an unanchored
arrangement and shows whichever fits, but a hidden ModuleList is still a
loaded Loader. With a center anchor set — the default — every center
module was therefore mounted twice for the life of the session: two IPC
handlers registered for the same target, two clocks ticking, two of every
timer and network fetch behind them, one set of which nothing could
reach.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Double-tapping the year bar asks for a birth year and a life expectancy,
and a second bar appears below measuring one against the other. Tab moves
between the two, Enter commits the pair, Escape drops them. Hovering the
bar names the thing, and double-tapping it puts it away again.
A birth year rather than an age, so the bar keeps counting on its own
instead of going stale the moment it is entered. Expectancy defaults to
ninety and falls back to it when what is entered makes no sense, so the
bar always has something to measure against; a birth year that makes no
sense leaves the bar hidden instead, which is also where it starts.
Putting the bar away keeps the expectancy, so setting a birth year again
brings your own number back rather than the default.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claiming the shared suppression flag before showing meant the outgoing
panel's close cleared it again, leaving the incoming panel open with the
indicators still revealed. Guarding the clear instead only moved the
problem: handing off to a panel that does not manage the flag left it
stuck on, and the center indicators stopped revealing on hover for good.
Claim it after the handoff instead. The panel taking over always wins,
and a handoff to a panel that knows nothing about the flag still leaves
it cleared.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Clicking the clock reveals a month grid with ISO week numbers, a year
progress meter, and month stepping. Right click walks the common label
formats and writes the chosen one back to shell.json, so the bar shows
what the config stores. The week start toggles from the grid's "W"
heading and persists as weekStartDay, defaulting to the locale's own
first day.
Rich popup widgets live in their own plugin directories, so the clock
moves out of bar/widgets/ into panels/clock/. The id is unchanged, so
existing layouts and centerAnchor keep working.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The bar identifies a panel by the widget mounted in its slot, but the
nested panel handed the popout coordinator itself. The open-panel mark
never lit under the weather pill, and Tab could not leave the panel.
Closing for a popout switch also cleared the shared hover-reveal flag the
incoming panel had just set.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A center-anchored module is mounted twice: the copy that is drawn, and a
zero-size placeholder holding its place in the flow beside the anchor.
findPanelWidget returned whichever registered first, and that order is
not stable across a live bar reconfiguration, so a panel could open
anchored to the invisible copy -- mispositioned, with the drawn slot
never lighting up and switchPanelFrom unable to find it again.
The mark was also always 55% of the slot, which fits an icon but
underlines only a fraction of a text label, and runs the full height of a
multi-line module on a vertical bar. Modules can now say how long the
mark should be along the bar; anything that does not answer keeps the old
proportion.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Send files to a tailnet machine with Taildrop
The panel gets a send button next to the copy one on every machine that
Tailscale grades as a Taildrop target, and `s` does the same from the
keyboard. Picking runs through the XDG portal chooser, so it looks like
the file dialog every other app opens.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Save incoming Taildrop files and say so
Linux keeps Taildrop files in the daemon's inbox until someone asks for
them, so nothing arrived until you ran `tailscale file get` by hand. A
user service now stages each delivery next to the downloads directory,
hands it over under a free name, and announces it — with a preview when
it's an image, and a click to open it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Float every portal dialog, not just the titled ones
The portal only ever shows dialogs, and the title regex missed any
chooser an app names something else — ours included.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Re-run the Taildrop enable now that the unit ships
The unit was never installed to /usr/lib/systemd/user/, so the enable had
nothing to act on and machines that already ran the migration carry a marker
for a no-op. Rename it so they get a working pass, and report what systemctl
says instead of a bare failure line.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wait for the file chooser on the connection that asked for it
The portal answers a request with a Response signal directed at the connection
that made it, and dbus-daemon delivers directed signals only to that
connection. gdbus monitor registers with AddMatch rather than BecomeMonitor, so
it never saw the reply: every pick left omarchy-file-select blocked on a read
that could not arrive, taking omarchy-tailscale-send down with it before it
reached either its notification or the transfer.
Make the call and wait for the signal on one connection, and give up after ten
minutes so an unanswered dialog cannot strand the caller.
Drop the "Sending to" notification while here, so a send reports once.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Mark Taildrop notifications with the panel's send glyph
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop a hung tailscale poll from freezing the panel
Each poll is skipped while its own process is still running, so one that never
exits leaves the panel showing whatever it last read, for good: the peer list
keeps a woken machine missing, and opening the panel cannot help because open
runs the same refresh that hits the same guard.
Reap anything still running fifteen seconds after a refresh, well inside the
thirty second interval, so the next tick starts clean.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Place a moved widget where an added one lands
'move omarchy.media left' named a section, not a slot, but the section went
through as an explicit target, which resolves a missing index by appending. The
widget landed on the far end of the row instead of after the section anchor
where 'add' puts it.
Its test has never run: the assertion covering this went in four hours after an
unrelated layout change had already stopped the file, and the runner stops the
whole suite at the first failure.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the config test from failing on things it is not about
The center layout assertion pinned the whole row, so parking the indicators
left of the clock broke a test named for update sitting next to weather. Assert
that adjacency instead.
The package-defaults check reads PKGBUILDs from the omarchy-pkgs repo and blew
up with a traceback wherever that is not a sibling checkout. Skip it when the
checkout is absent, honour OMARCHY_PKGS_ROOT when it is somewhere else, and
keep failing when it is present and wrong.
Between them these stopped the suite eighty files early.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the file chooser a Python command rather than a bash host for one
The portal work was a heredoc wedged inside a bash script that existed only to
parse two flags. Drop the host: argparse covers the flags, and the file says at
the top why it is the one command here not written in bash.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Tell a chooser that never opened apart from one that was dismissed
Three fixes from review:
The poll watchdog rearmed on every refresh, so a refresh interval shorter than
its timeout — the setting goes down to five seconds — pushed the deadline ahead
of a hung process forever. Arm it on the launch that needs watching and leave
it alone.
omarchy-file-select exited 1 both for nothing picked and for a chooser that
could not run, and omarchy-tailscale-send read it through a process
substitution, which drops the status anyway. A session bus that was not there
looked exactly like someone changing their mind. Separate the two exits and
read them with a command substitution.
Delivery picked a free name and then renamed, which overwrites anything that
takes the name in between. Link to the name instead: link(2) refuses one that
is taken, so the check and the claim are the same step.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Say it once and match mergeAppRows: app rows sort after all menu items,
not interleaved among them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Searching the menu for an installed app buried it: "brave" listed Setup >
Defaults > Browser, Install > Browser and Remove > Browser ahead of the
Brave app itself. All four are exact label matches scoring 0, so the
tiebreak falls to declaration order, and mergeAppRows appends app rows
after every static item.
Bias app rows ahead of menu entries that match equally well. The bias is
smaller than the gap between match tiers, so a menu entry that matches the
query better still sorts first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Replaying an empty history did nothing at all on screen, which reads as
a dead keybinding rather than an empty log.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The reader is still reachable on an external keyboard or a docked
laptop, so hiding the icon and skipping the scan just forced the
password. sudo and polkit keep their pam_exec lid gates.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
tmux only raises an activity flag for windows that are not currently
selected, so a long-running command in the window you left selected --
the common case, since you switch away by moving your Hyprland focus
elsewhere rather than by selecting another tmux window -- finished
silently and the indicator never lit.
Windows now also count as waiting when they are selected in an attached
client, every client showing them is unfocused, and their window_activity
is newer than an @omarchy_unfocused_activity watermark. The watermark is
stamped by a new `track` subcommand wired to client-focus-in/out and the
existing select-window hooks, so it records where attention last was.
The hooks pass #{window_id} and #{window_activity} as arguments, which
tmux expands when the hook fires; run-shell -b would otherwise let output
arriving during the handoff be swallowed by the new watermark. The focus
hooks take index 100 to leave a user's own bindings alone.
That state has no hook of its own, so it needs polling to be noticed.
The probe therefore moves out of the indicator and into a service plugin,
alongside nightlight and battery. A bar surface exists per monitor and
each one instantiates every indicator twice, once per block, so a timer
on the indicator meant a shell-out per instance per tick -- four probe
processes every three seconds on a two-monitor machine, forever. One
service polls for the whole shell instead.
Sharing the state also fixes what per-instance polling would have papered
over: each indicator used to own its own count, so a timer-driven update
only refreshed the bar it ran on and left the other monitors stale.
Refreshes still arrive over the existing indicator broadcast, which now
coalesces into a single run no matter how many bars relay it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_018CC9kSQv8ZEogaxDoeKBzL
The lineup now reads toward the clock instead of away from it, so Stay
Awake sits nearest the time, then do-not-disturb, night light, reminder,
screen recording, dictation, and tmux alerts trailing off to the left.
Active indicators render after the hover-revealed ones so they stay
against the clock, and a newly active indicator joins on the far side
rather than shoving the ones already showing sideways.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The apps list rebuilt its rows by writing into the maps held by the menu's
items and itemOrder var properties. Writing into an object owned by a QML var
property is not reliable: the same row object written into a plain JS object
always lands, but written through the property it occasionally arrives with the
key created and the value undefined. One write per rescan was lost, on a
different app each time.
A lost write left an id in itemOrder with no item behind it. The old purge only
deleted app rows it could find in items, so the orphan survived the next merge,
the add loop appended a second row for the same app, and the list grew by one --
permanently, and again on every later rescan. Touching a single desktop file
fires around a dozen merges, because the entry model emits valuesChanged per
insert and removal while it reconciles, so duplicates piled up quickly: nine
YouTube rows on the reporting machine, and Alacritty doubled before that.
The bookkeeping moves into MenuModel as two pure functions that build fresh maps
for the caller to assign in one shot, so the fragile write disappears. They also
make the merge self-healing rather than merely correct-when-nothing-is-lost: an
id with no item is dropped instead of carried forward, and an id is listed once
even when two desktop entries claim it -- so no single dropped write can compound
into a duplicate row again. The bash-backed providers behind the font and power
profile lists had the same latent bug and get the same treatment.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
Laptop speakers ship voiced by the vendor's Windows DSP layer, which Linux does
not get. A tuning restores that as a PipeWire filter-chain in front of the
internal speaker sink, matched to the machine by DMI string and expected sink.
Adding a laptop is a directory under default/audio/tunings with two files and no
new code: matching is data. The XPS 14 DA14260 tuning included here was derived by
measuring the xps-audio-linux EasyEffects profile (MIT) and fitting a biquad chain
to it, so no impulse response or other upstream asset is redistributed. It measures
1.24 dB RMS against that reference, and matches its dynamic range within 0.1 LU --
the reference's multiband compressor turned out to contribute nothing, so a linear
chain replaces it. Bass Q is capped deliberately: a closer magnitude fit swung
group delay 31 ms across 63-80 Hz, which smears bass transients.
The graph runs as its own PipeWire client under its own config name rather than
loading into the audio daemon. The daemon only reads its config at startup, so a
daemon-loaded tuning could only be switched by restarting PipeWire -- which drops
every PulseAudio client's connection, and applications that do not reconnect
(Spotify) then have to be restarted by hand. Hosting it separately also contains
failure, since a malformed tuning breaks only that service.
Three things about the surrounding audio graph needed fixing for this to behave:
- Volume must live downstream of the tuning. omarchy-audio-output-sink is now the
single definition of which sink an output's volume really uses, shared by the
volume keys, the output switcher's OSD and the audio panel, so they cannot
disagree. It resolves the current default output, which keeps it correct when
headphones are selected while a tuning exists.
- The tuning's own output is a movable sink input, so rerouting "all streams" to a
newly selected output would drag the processing onto headphones, or into the
tuning's own sink, which is a cycle. It is pinned, and stream moves are limited
to streams carrying an application.name.
- The physical sink a tuning fronts is not independently selectable, since picking
it would only bypass the tuning, so it is kept out of the output list.
Applying happens at first-run, not finalize-user, because finalize-user also runs
in the ISO chroot where there is no audio server and nothing would retry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A bar surface is built per monitor, so a widget in the layout is live once
per screen — but an IPC target only ever routes to the handler that
registered first. `omarchy.indicators refresh` therefore reached a single
bar, and since indicators only re-read their state on that signal, the
other screens kept showing a stale reminder count, tmux alert, or DND
state until the next reload. Clock and system-update refreshes had the
same reach.
Let the bar resolve every live instance of a widget id and relay the call
to all of them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
argv is world-readable in /proc for every local process while the
connection attempt runs. Create the profile without the secret, then
set it through nmcli's scriptable connection editor, which reads from
stdin.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SCALE only applies to the focused monitor, which is easy to lose track
of with several displays. Show the focused monitor's name on the right
of the SCALE header (matching the BRIGHTNESS/TEXT SIZE value
convention), hidden when only one display is enabled.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Use Region { item: popupColumn } instead of manually mirroring the
column's x/y/width/height. It tracks the item's mapped geometry directly,
so it stays correct without assuming the column shares the window's
coordinate space.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The popups used one Wayland layer surface per output sized to their content
(implicitWidth/Height bound to the toast column), so every time a toast was
added or removed the surface resized. During that resize the compositor
briefly scaled a stale buffer, stretching or squishing the cards mid-
transition -- worst with only one or two toasts, where each resize is a
larger relative change.
Make the surface full-screen and fixed, like the OSD overlay, so adding or
removing a toast only changes the content inside it and the surface never
resizes. Mask the input region to the toast column so the otherwise-
invisible full-screen overlay stays click-through.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Session names can contain pipes but never colons, so split fields on
colons instead. Remember refreshes that arrive while the indicator is
already polling, and jump to the most recently used tmux client rather
than an arbitrary one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Show a bar indicator whenever tmux has flagged a window, the same state
that highlights the tab, and jump to it on click or with Super + Ctrl + J.
Tmux hooks push the state to the shell, so nothing polls while no pane is
waiting.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
