#!/bin/bash

# omarchy:summary=Turn Bluetooth on or off, remembered across reboots
# omarchy:group=bluetooth
# omarchy:args=<on|off|toggle|is-on>

# BlueZ never persists an adapter's Powered property, so turning Bluetooth off
# through bluetoothctl lasts only until the next boot. The rfkill soft block does
# persist: systemd-rfkill saves every switch under /var/lib/systemd/rfkill and
# restores it early on the next boot, which is its entire job. Blocking is also
# what the kernel hands every radio at once, so a machine with two controllers
# gets both, where bluetoothctl only ever addresses the default one.
#
# So the block is the state, and BlueZ follows it: unblocking leaves AutoEnable
# at its stock default and bluetoothd powers the adapter up by itself. Every
# Omarchy path that turns Bluetooth on or off goes through here, because a plain
# `bluetoothctl power on` fails outright while the block is set.

POWER_WAIT_SECONDS=${OMARCHY_BLUETOOTH_POWER_WAIT_SECONDS:-2}

controllers() {
  timeout 2s bluetoothctl list 2>/dev/null | awk '{print $2}'
}

# Any controller counts. The block is all-or-nothing across the radios, so the
# state has to be read the same way; a bare `bluetoothctl show` would report the
# default controller and miss a powered dongle sitting behind it.
powered() {
  local controller

  for controller in $(controllers); do
    [[ $(timeout 2s bluetoothctl show "$controller" 2>/dev/null) == *"Powered: yes"* ]] && return 0
  done

  return 1
}

# One deadline around the whole wait rather than a fixed number of probes: every
# probe can sit on its own timeout when D-Bus is wedged, and counting probes then
# stretches a two-second wait into half a minute.
wait_powered() {
  local deadline=$((SECONDS + POWER_WAIT_SECONDS))

  while :; do
    powered && return 0
    ((SECONDS < deadline)) || return 1
    sleep 0.2
  done
}

power_on() {
  rfkill unblock bluetooth

  # Usually all it takes: with AutoEnable at its default, bluetoothd powers the
  # adapter up on its own once the block is gone. It will not do that for an
  # adapter powered down without a block, so ask directly before giving up.
  wait_powered && return 0

  timeout 5s bluetoothctl power on >/dev/null 2>&1
  wait_powered && return 0

  echo "omarchy-bluetooth-power: adapter did not come up" >&2
  return 1
}

case "${1:-}" in
  on)
    power_on
    ;;
  off)
    # No bluetoothctl power off to go with this: the block already drops the
    # adapter to Powered: no, and it is the half that survives the reboot.
    rfkill block bluetooth
    ;;
  toggle)
    if powered; then
      rfkill block bluetooth
    else
      power_on
    fi
    ;;
  is-on)
    powered
    ;;
  *)
    echo "Usage: omarchy-bluetooth-power <on|off|toggle|is-on>" >&2
    exit 1
    ;;
esac