#!/bin/bash

# omarchy:summary=Set up fingerprint authentication for sudo, polkit, and lock screen
# omarchy:requires-sudo=true

set -e


setup_pam_config() {
  # A clamshell gate runs before pam_fprintd in every stack: when the lid is
  # shut the reader is unreachable, so it skips fingerprint (success=1) and PAM
  # drops straight to the password prompt instead of blocking on the reader
  # until it times out. Lid open → fingerprint, then password as the fallback.
  #
  # pam_exec needs a literal absolute path (no env expansion). Point at the
  # fixed /usr/bin path the omarchy package always provides, so the gate keeps
  # working across package installs and dev-link — the latter overlays
  # $OMARCHY_PATH trees but leaves /usr/bin untouched.
  local fprintd_gate="auth      [success=1 default=ignore] pam_exec.so quiet /usr/bin/omarchy-hw-laptop-closed"

  # Configure sudo
  if ! grep -q pam_fprintd.so /etc/pam.d/sudo; then
    echo "Configuring sudo for fingerprint authentication..."
    sudo sed -i '1i auth      sufficient pam_fprintd.so' /etc/pam.d/sudo
  fi
  if ! grep -q 'omarchy-hw-laptop-closed' /etc/pam.d/sudo; then
    echo "Adding clamshell gate to sudo..."
    # Insert immediately before pam_fprintd so success=1 skips exactly it.
    sudo sed -i "/pam_fprintd\.so/i $fprintd_gate" /etc/pam.d/sudo
  fi

  # Configure polkit
  if [[ -f /etc/pam.d/polkit-1 ]]; then
    if ! grep -q 'pam_fprintd.so' /etc/pam.d/polkit-1; then
      echo "Configuring polkit for fingerprint authentication..."
      sudo sed -i '1i auth      sufficient pam_fprintd.so' /etc/pam.d/polkit-1
    fi
    if ! grep -q 'omarchy-hw-laptop-closed' /etc/pam.d/polkit-1; then
      echo "Adding clamshell gate to polkit..."
      sudo sed -i "/pam_fprintd\.so/i $fprintd_gate" /etc/pam.d/polkit-1
    fi
  else
    echo "Creating polkit configuration with fingerprint authentication..."
    sudo tee /etc/pam.d/polkit-1 >/dev/null <<EOF
$fprintd_gate
auth      sufficient pam_fprintd.so
auth      required pam_unix.so

account   required pam_unix.so
password  required pam_unix.so
session   required pam_unix.so
EOF
  fi
}

setup_lock_fingerprint_pam() {
  echo "Configuring lock screen for fingerprint authentication..."
  sudo tee /etc/pam.d/omarchy-lock-fingerprint >/dev/null <<'EOF'
#%PAM-1.0
auth       required                    pam_fprintd.so
account    include                     system-local-login
EOF
}


echo -e "\e[32mSetting up fingerprint scanner for authentication.\n\e[0m"

# Bail before installing anything if there's no reader to talk to.
if ! omarchy-hw-fingerprint; then
  echo -e "\e[31mNo fingerprint sensor detected.\e[0m"
  exit 1
fi

# Install required packages
echo "Installing required packages..."

# libfprint-git provides+conflicts libfprint; pacman -S --noconfirm
# defaults the conflict prompt to N and aborts. Pre-remove it (deps-only,
# so an installed fprintd stays put) so stock libfprint installs cleanly.
if pacman -Q libfprint-git &>/dev/null; then
  sudo pacman -Rdd --noconfirm libfprint-git
fi

omarchy-pkg-add libfprint fprintd usbutils

# Enroll first fingerprint
echo -e "\e[32m\nLet's setup your right index finger as the first fingerprint.\e[0m"
echo -e "Keep moving the finger around on sensor until the process completes.\n"

if sudo fprintd-enroll "$USER"; then
  echo -e "\e[32m\nFingerprint enrolled successfully!\e[0m"

  # Verify
  echo -e "\nNow let's verify that it's working correctly.\n"
  if fprintd-verify; then
    # PAM comes last, once a print is enrolled and verified. Detection only
    # proves a reader is there, not that libfprint can drive it — an Elan MOC
    # sensor outside the elanmoc table gets this far and then fails to enroll.
    # Editing the stacks up front would leave those machines pointing at
    # pam_fprintd with nothing to match.
    setup_pam_config
    setup_lock_fingerprint_pam
    echo -e "\e[32m\nPerfect! Fingerprint authentication is now configured.\e[0m"
    echo "You can use your fingerprint for sudo, polkit, and lock screen (Super + Ctrl + L)."
  else
    echo -e "\e[31m\nVerification failed. You may want to try enrolling again.\e[0m"
  fi
else
  echo -e "\e[31m\nEnrollment failed. Please try again.\e[0m"
  exit 1
fi