6fa4f78ee1
* Add OEM first-boot setup and factory reset An OEM-mode ISO install (or omarchy-reset-computer) leaves the machine in OEM state: fully installed, no user, /var/lib/omarchy/oem/pending armed. On the next boot omarchy-oem-setup.service runs the configurator's user form on tty1, creates the user with the groups system setup recorded, finalizes it offline from the stashed Node tarball, re-keys LUKS from the throwaway install passphrase to the user's password, and hands off to SDDM. omarchy-reset-computer returns a machine to that state: it swaps the running root for a fresh clone of the @factory snapshot the ISO takes at install time, scrubs machine identity and prior users, and stages omarchy-factory-wipe to drop the old root and recreate @home/@log on the next boot. Machines installed before @factory existed get a degraded reset (current system kept, users and state wiped) with that caveat surfaced in the confirmation. omarchy-setup-system/-hardware gain --oem to run without an install user; the group-granting install scripts now record their groups in /var/lib/omarchy/oem/groups and only call usermod when the user exists. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Harden OEM setup: correct cryptsetup key-file usage, retry on failure cryptsetup reads --test-passphrase/--key-file inputs byte-for-byte, so feed passphrases through process substitution consistently instead of positional args or stdin (which has different newline semantics). Run each first-boot setup attempt as its own process so a failure offers a retry instead of stranding the machine at a user-less login screen — bash ignores errexit inside `while !` conditions, a child process does not. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Always grant wheel sudo in OEM first-boot setup Detecting an existing %wheel grant by grepping sudoers is error-prone: omarchy ships narrow '%wheel ALL=(ALL) NOPASSWD: <command>' rules (e.g. asdcontrol) that match the naive pattern, which left the OEM-created user matching sudoers entries but unable to run anything. Write the drop-in unconditionally — a duplicate of an existing full grant is harmless. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Fix LUKS re-key device resolution and OEM state readability archinstall's encrypted installs put cryptdevice=PARTUUID=... on the kernel cmdline, not UUID=, so the first-boot re-key never found its device and silently skipped — leaving the throwaway auto-unlock keyfile in place, i.e. the disk effectively unencrypted. Parse every cryptdevice= source spec form and make any re-key failure abort the attempt loudly: a retry prompt beats a machine that quietly boots without a passphrase forever. The OEM state directory also has to be world-readable (its one secret, luks-key, stays 0600): user finalization reads the stashed Node tarball as the new user, and the 0700 directory forced it onto the network fallback. Step markers now land in /var/log/omarchy-oem-setup.log for debuggability. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Purge stale machine-id boot entries when resetting or re-keying limine-entry-tool keys its limine.conf OS entries by machine-id. A factory reset gives the machine a fresh identity, so the previous system's entry survived every rebuild, sorted first, and made Limine stop at a Blake2b hash-mismatch warning once the UKI was rebuilt. Start limine.conf over from the shipped template (and drop foreign machine-id history directories on the ESP) before any post-reset rebuild: in the staged chroot rebuild, in the first-boot LUKS re-key, and — for unencrypted resets, where nothing else rebuilds — in a dedicated first-boot refresh when foreign entries are found. The staged rebuild also verifies every UKI hash referenced by limine.conf against the file on the ESP before the subvolume swap, and the running system's limine-snapper-sync is runtime-masked during staging so it cannot rewrite the config behind the rebuild. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Harden reset and first-boot setup failure paths Review findings from codex and Copilot: - Generate throwaway passphrases without a trailing head stage: under pipefail, SIGPIPE from the infinite tr failed the substitution and errexit aborted every encrypted reset before it could stage anything. - Stage the fallible parts of a degraded reset (LUKS re-key, boot rebuild) before arming the wipe, so a staging failure leaves the machine untouched instead of scheduling a wipe for a reset that never finished. - Gate first-boot setup on the factory wipe having succeeded (ConditionPathExists=!wipe-pending plus an in-script guard): creating the new user on a half-wiped system would hand their data to the wipe retry. - Abort the wipe (keeping its retry marker) when deleting the old root or recreating @home/@log fails, and abort resets that cannot remove a prior account — a surviving account keeps its password and wheel membership. - Resume a partially-created account on setup retry instead of rejecting the username the failed attempt just created. - Only purge machine-id directories the old limine.conf actually referenced; a shared ESP may hold other installations' boot artifacts. - Recreate the hibernation swapfile (nested subvolume, so never captured by the factory snapshot) inside the factory root before its UKI rebuild, so a reset machine keeps disk-backed swap and a valid resume offset. - Source base-test.sh in the OEM groups test per test conventions. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Recreate the hibernation swapfile even when resume drop-ins survive omarchy-hibernation-setup short-circuits as 'already set up' when the resume mkinitcpio drop-in exists — which it always does in a factory root, while the swapfile itself never survives the snapshot (nested subvolume). Drop the marker when the swapfile is gone so setup reconfigures from scratch, and verify the swapfile actually exists before proceeding with the reset. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Second review pass: encrypted-config coverage, factory-baseline sanitization, recoverable rekey Codex xhigh round 2: - Detect the LUKS backing device by walking the root's device tree, not only the cmdline cryptdevice=; reset/first-boot now re-key roots reached via rd.luks/crypttab too, instead of silently leaving the seller's slots valid. - Sanitize the retained @factory baseline (accounts, /etc/shadow, machine identity) during a full reset: the new wheel user could otherwise mount it to recover the seller's data, and a second reset would restore the account. - Re-key the disk recoverably: rebuild the no-auto-unlock UKI before killing the throwaway slot or destroying the staged key, and restore the keyfile if that rebuild fails, so a retry with a different password can never leave the disk locked to the first attempt's password. - Roll back a degraded reset's live-root auto-unlock material if its boot rebuild fails, instead of leaving it for a later rebuild to embed. - Treat a missing current-machine limine entry as stale so a retry after a failed rebuild repairs the config instead of clearing OEM state over it. - Erase fingerprint enrollments (/var/lib/fprint) in degraded wipes. - Remove the resume-offset drop-in too when recreating the factory swapfile, so the rebuilt UKI gets a correct offset. - Pin first-boot retries to the account the first attempt created. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Expose factory reset in the Setup menu Add a 'Reset Computer' entry under Setup (Omarchy's Settings menu, where OS factory resets conventionally live), guarded to btrfs roots and launched in a floating terminal. omarchy-reset-computer now self-elevates via sudo so the menu entry needs no sudo prefix, forwarding the caller's gum theme env as env arguments so styling survives an env_reset sudoers. The typed 'reset' confirmation and the sudo password prompt remain as the guards against accidental triggering. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Defer keyboard selection to first boot for OEM installs The OEM first-boot setup now runs a keyboard step before the user form, mirroring the ISO configurator: it loads the chosen layout on the live VT so the password (and the LUKS re-key that follows) are typed under it, and persists it with systemd-firstboot so the installed system gets both the console KEYMAP and the XKB layout Hyprland reads — exactly what a normal install writes. Layouts localectl doesn't know keep the default, same as the installer. This lets the OEM operator set nothing user-specific: the machine's owner picks their keyboard alongside their account at first boot. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Rename factory-reset commands to omarchy-system-factory-reset[-finish] omarchy-reset-computer -> omarchy-system-factory-reset omarchy-factory-wipe -> omarchy-system-factory-reset-finish (and its systemd unit, log path, and temp mount to match) Pure rename: every reference — the Setup menu action, the first-boot finish service the reset stages and enables, the oem-setup ordering/gating, comments, and the menu test — moves together, with no behavior change. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Rename OEM vocabulary to provisioning (runtime) Commands unify under the provisioning family: omarchy-oem-setup → omarchy-provision-owner omarchy-finalize-user → omarchy-provision-user omarchy-first-run → omarchy-provision-first-run And the deferred-provisioning state/vocabulary replaces 'OEM': /var/lib/omarchy/oem/ → /var/lib/omarchy/provisioning/ /etc/omarchy/oem.key → /etc/omarchy/provisioning.key install/oem/ → install/provisioning/ OMARCHY_SETUP_CONTEXT=oem-firstboot → provision-owner omarchy-setup-system/-hardware --oem → --defer-provisioning All callers (provision-first-run→provision-user, autostart, factory-reset staging the provisioning units, the group-recording scripts) and comments move together. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Drop remaining OEM mentions from the provisioning groups test Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Finish the omarchy-first-run rename in the docs Two doc references to omarchy-first-run were missed when the script was renamed to omarchy-provision-first-run; update them to match. Co-Authored-By: Claude <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
36 lines
1.4 KiB
Desktop File
36 lines
1.4 KiB
Desktop File
# First-boot provisioning: asks for the user on tty1 before SDDM starts.
|
|
# Armed by /var/lib/omarchy/provisioning/pending (written by a deferred-provisioning ISO install or
|
|
# omarchy-system-factory-reset); installed to /etc/systemd/system by whichever of
|
|
# those staged it. Not shipped enabled — a normal install never runs it.
|
|
|
|
# plymouth is dismissed via ExecStartPre rather than ordered against
|
|
# (plymouth-quit-wait), keeping this unit free of ordering-cycle risk with
|
|
# display-manager.service.
|
|
# The wipe-pending condition gates against a failed factory wipe: After= is
|
|
# ordering only, and running user setup on a half-wiped system would create
|
|
# the new account on state a wipe retry later deletes. While wipe-pending
|
|
# remains, setup stays down and the wipe retries on the next boot.
|
|
[Unit]
|
|
Description=Omarchy provisioning first-boot user setup
|
|
ConditionPathExists=/var/lib/omarchy/provisioning/pending
|
|
ConditionPathExists=!/var/lib/omarchy/provisioning/wipe-pending
|
|
After=systemd-user-sessions.service omarchy-system-factory-reset-finish.service
|
|
Before=display-manager.service getty@tty1.service
|
|
Conflicts=getty@tty1.service
|
|
|
|
[Service]
|
|
Type=oneshot
|
|
RemainAfterExit=yes
|
|
ExecStartPre=-/usr/bin/plymouth quit
|
|
ExecStart=/usr/bin/omarchy-provision-owner
|
|
StandardInput=tty
|
|
StandardOutput=tty
|
|
StandardError=tty
|
|
TTYPath=/dev/tty1
|
|
TTYReset=yes
|
|
TTYVHangup=yes
|
|
TTYVTDisallocate=yes
|
|
|
|
[Install]
|
|
WantedBy=multi-user.target
|