acrogenesis
cd519283fe
Omarchy 3 wrote 99-power-profile.rules and 99-wifi-powersave.rules with an unquoted heredoc, baking the installing user's home into a rule udev runs as root. That path resolves through ~/.local/share/omarchy, a symlink the unprivileged user owns, so replacing it and provoking a power_supply event runs their code as root. HEAD points the rules at /usr/bin under new names, but the one-shot cleanup for the old filenames was dropped, leaving the file on every install that came up through the 3.x line. Remove a legacy file only when an active RUN+= really does run that filename's binary out of a home directory, so a rule of the same name a user wrote themselves stays, comments and all.
230 lines
8.8 KiB
Bash
Executable File
230 lines
8.8 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
set -euo pipefail
|
|
|
|
source "$(dirname "$0")/base-test.sh"
|
|
|
|
migration="$ROOT/migrations/1787946619.sh"
|
|
[[ -f $migration ]] || fail "the legacy power udev rule migration exists at $migration"
|
|
|
|
test_dir=$(mktemp -d)
|
|
trap 'rm -rf "$test_dir"' EXIT
|
|
|
|
mkdir -p "$test_dir/bin"
|
|
|
|
# sudo runs the real command, so the removals act on the redirected rules
|
|
# directory below and the elevated calls land in the log beside it.
|
|
cat >"$test_dir/bin/sudo" <<'STUB'
|
|
#!/bin/bash
|
|
|
|
printf 'sudo %s\n' "$*" >>"$CALLS"
|
|
exec "$@"
|
|
STUB
|
|
|
|
cat >"$test_dir/bin/udevadm" <<'STUB'
|
|
#!/bin/bash
|
|
|
|
printf 'udevadm %s\n' "$*" >>"$CALLS"
|
|
STUB
|
|
|
|
chmod +x "$test_dir/bin/"*
|
|
|
|
export CALLS="$test_dir/calls"
|
|
|
|
rules_dir="$test_dir/rules.d"
|
|
home_dir="$test_dir/home"
|
|
power_rule="$rules_dir/99-power-profile.rules"
|
|
wifi_rule="$rules_dir/99-wifi-powersave.rules"
|
|
|
|
reset_machine() {
|
|
rm -rf "$rules_dir" "$home_dir"
|
|
mkdir -p "$rules_dir" "$home_dir"
|
|
}
|
|
|
|
run_migration() {
|
|
: >"$CALLS"
|
|
|
|
HOME="$home_dir" \
|
|
OMARCHY_UDEV_RULES_DIR="$rules_dir" \
|
|
PATH="$test_dir/bin:$PATH" \
|
|
bash -euo pipefail "$migration" >/dev/null
|
|
}
|
|
|
|
reload_count() {
|
|
grep -cx 'udevadm control --reload' "$CALLS" || true
|
|
}
|
|
|
|
# What Omarchy 3's unquoted heredoc actually left on disk: the installing user's
|
|
# home expanded into a rule root runs on every power_supply event.
|
|
write_vulnerable_power_rule() {
|
|
cat >"$power_rule" <<'RULE'
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-power-profile --property=After=power-profiles-daemon.service /home/someuser/.local/share/omarchy/bin/omarchy-powerprofiles-set"
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="USB", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-power-profile --property=After=power-profiles-daemon.service /home/someuser/.local/share/omarchy/bin/omarchy-powerprofiles-set"
|
|
RULE
|
|
}
|
|
|
|
write_vulnerable_wifi_rule() {
|
|
cat >"$wifi_rule" <<'RULE'
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="0", RUN+="/home/someuser/.local/share/omarchy/bin/omarchy-wifi-powersave on"
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="1", RUN+="/home/someuser/.local/share/omarchy/bin/omarchy-wifi-powersave off"
|
|
RULE
|
|
}
|
|
|
|
reset_machine
|
|
write_vulnerable_power_rule
|
|
run_migration
|
|
|
|
[[ ! -e $power_rule ]] ||
|
|
fail "migration removes a power profile rule that runs out of a user home" "$(cat "$power_rule")"
|
|
pass "migration removes a power profile rule that runs out of a user home"
|
|
|
|
grep -q '^sudo rm -f .*99-power-profile\.rules$' "$CALLS" ||
|
|
fail "migration removes the rule with elevated privileges" "$(cat "$CALLS")"
|
|
pass "migration removes the rule with elevated privileges"
|
|
|
|
reset_machine
|
|
write_vulnerable_wifi_rule
|
|
run_migration
|
|
|
|
[[ ! -e $wifi_rule ]] ||
|
|
fail "migration removes a Wi-Fi power save rule that runs out of a user home" "$(cat "$wifi_rule")"
|
|
pass "migration removes a Wi-Fi power save rule that runs out of a user home"
|
|
|
|
# udevd keeps running the rule it already parsed, so the file being gone from
|
|
# disk is only half the fix until it reloads.
|
|
(( $(reload_count) == 1 )) ||
|
|
fail "migration reloads udev after removing a rule" "$(cat "$CALLS")"
|
|
pass "migration reloads udev after removing a rule"
|
|
|
|
# Both files gone is still one machine-wide reload, not one per file.
|
|
reset_machine
|
|
write_vulnerable_power_rule
|
|
write_vulnerable_wifi_rule
|
|
run_migration
|
|
|
|
[[ ! -e $power_rule && ! -e $wifi_rule ]] ||
|
|
fail "migration removes both legacy rules in one pass"
|
|
(( $(reload_count) == 1 )) ||
|
|
fail "migration reloads udev once for both removals" "$(cat "$CALLS")"
|
|
pass "migration removes both legacy rules and reloads udev once"
|
|
|
|
# The second run is what every other account on the machine does, and what a
|
|
# user gets from running omarchy-migrate again.
|
|
run_migration
|
|
|
|
(( $(reload_count) == 0 )) ||
|
|
fail "migration does not reload udev on a second run" "$(cat "$CALLS")"
|
|
[[ ! -s $CALLS ]] ||
|
|
fail "migration touches nothing on a second run" "$(cat "$CALLS")"
|
|
pass "migration is a no-op on a second run"
|
|
|
|
reset_machine
|
|
run_migration
|
|
|
|
[[ ! -s $CALLS ]] ||
|
|
fail "migration touches nothing when the legacy rules are absent" "$(cat "$CALLS")"
|
|
pass "migration leaves a machine without the legacy rules alone"
|
|
|
|
# A user who wrote their own rule under one of these names keeps it, even when
|
|
# the file talks about the legacy checkout. udev never runs a comment.
|
|
reset_machine
|
|
cat >"$power_rule" <<'RULE'
|
|
# Replaces the rule Omarchy used to install from
|
|
# /home/someuser/.local/share/omarchy/bin/omarchy-powerprofiles-set
|
|
#SUBSYSTEM=="power_supply", ATTR{type}=="Mains", RUN+="/home/someuser/.local/share/omarchy/bin/omarchy-powerprofiles-set"
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", RUN+="/usr/local/bin/my-own-power-hook"
|
|
RULE
|
|
cat >"$wifi_rule" <<'RULE'
|
|
# Kept from the old local/share/omarchy setup, rewritten to my own script
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="1", RUN+="/usr/local/bin/my-own-wifi-hook off"
|
|
RULE
|
|
before=$(cat "$power_rule" "$wifi_rule")
|
|
run_migration
|
|
|
|
[[ -e $power_rule && -e $wifi_rule ]] ||
|
|
fail "migration keeps same-named rules that only mention the legacy path"
|
|
[[ $(cat "$power_rule" "$wifi_rule") == "$before" ]] ||
|
|
fail "migration leaves the user's own rules byte for byte"
|
|
[[ ! -s $CALLS ]] ||
|
|
fail "migration escalates nothing when it removes nothing" "$(cat "$CALLS")"
|
|
pass "migration keeps same-named rules that only mention the legacy path"
|
|
|
|
# udev discards a '#' line before it ever looks for a trailing backslash, so the
|
|
# rule below the comment is live and root still runs it. `udevadm verify` on this
|
|
# exact shape, with a bogus key on the second line, reports the error on line 2.
|
|
# The file has to go.
|
|
reset_machine
|
|
cat >"$power_rule" <<'RULE'
|
|
# Disabled while I test the packaged rule: \
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", RUN+="/home/someuser/.local/share/omarchy/bin/omarchy-powerprofiles-set"
|
|
RULE
|
|
run_migration
|
|
|
|
[[ ! -e $power_rule ]] ||
|
|
fail "migration removes a rule left live under a commented continuation" "$(cat "$power_rule")"
|
|
pass "migration removes a rule left live under a commented continuation"
|
|
|
|
# A comment that does not continue still hides nothing behind it: the file holds
|
|
# no active RUN+= at all and stays.
|
|
reset_machine
|
|
cat >"$power_rule" <<'RULE'
|
|
# SUBSYSTEM=="power_supply", ATTR{type}=="Mains", RUN+="/home/someuser/.local/share/omarchy/bin/omarchy-powerprofiles-set"
|
|
RULE
|
|
run_migration
|
|
|
|
[[ -e $power_rule ]] ||
|
|
fail "migration keeps a rule that is only ever mentioned in a comment"
|
|
pass "migration keeps a rule that is only ever mentioned in a comment"
|
|
|
|
# The May 2026 rename left an intermediate variant under the old filename that
|
|
# already ran out of /usr/bin. It duplicates the packaged rule but is not the
|
|
# privilege escalation this migration exists to clear, so it is not ours to take.
|
|
reset_machine
|
|
cat >"$power_rule" <<'RULE'
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="1", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-power-profile-ac --property=After=power-profiles-daemon.service /usr/bin/powerprofilesctl set performance"
|
|
RULE
|
|
run_migration
|
|
|
|
[[ -e $power_rule ]] ||
|
|
fail "migration keeps a legacy filename already repointed at /usr/bin"
|
|
pass "migration keeps a legacy filename already repointed at /usr/bin"
|
|
|
|
# Homes are not all under /home, so the running user's own home counts too, and
|
|
# the argument the later variants passed must not hide the path.
|
|
reset_machine
|
|
cat >"$wifi_rule" <<RULE
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="0", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-wifi-powersave-on $home_dir/.local/share/omarchy/bin/omarchy-wifi-powersave on"
|
|
RULE
|
|
run_migration
|
|
|
|
[[ ! -e $wifi_rule ]] ||
|
|
fail "migration removes a rule that runs out of a home outside /home" "$(cat "$wifi_rule")"
|
|
pass "migration removes a rule that runs out of a home outside /home"
|
|
|
|
# Nothing named the wrong binary is ours: the same path with a different command
|
|
# is a rule this migration cannot claim to know anything about.
|
|
reset_machine
|
|
cat >"$power_rule" <<'RULE'
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", RUN+="/home/someuser/.local/share/omarchy/bin/omarchy-wifi-powersave on"
|
|
RULE
|
|
run_migration
|
|
|
|
[[ -e $power_rule ]] ||
|
|
fail "migration matches the binary the filename promises, not any home path"
|
|
pass "migration matches the binary the filename promises, not any home path"
|
|
|
|
# udev resumes a continuation across a comment: `udevadm verify` on
|
|
# 'SUBSYSTEM=="power_supply" \' + "# c" + ', RUN+="..."' reports its style warning
|
|
# on line 1, so those three lines are one rule and the rule is live.
|
|
reset_machine
|
|
cat >"$power_rule" <<'RULE'
|
|
SUBSYSTEM=="power_supply", ATTR{type}=="Mains" \
|
|
# split for readability
|
|
, RUN+="/home/someuser/.local/share/omarchy/bin/omarchy-powerprofiles-set"
|
|
RULE
|
|
run_migration
|
|
|
|
[[ ! -e $power_rule ]] ||
|
|
fail "migration removes a rule that continues across a comment" "$(cat "$power_rule")"
|
|
pass "migration removes a rule that continues across a comment"
|