David Heinemeier HanssonandClaude Opus 5
f228c4d390
gum and ttfx ship in omarchy-base.packages and setfont comes with kbd, so none of them needs a presence check — and every setfont call already tolerates a failure anyway. btrfs-progs is in omarchy-other.packages and a reset genuinely cannot proceed without it, so that one keeps its guard and moves to the helper. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
1088 lines
40 KiB
Bash
Executable File
1088 lines
40 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
# omarchy:summary=First-boot provisioning: create the user on a machine installed in deferred provisioning
|
|
# omarchy:requires-sudo=true
|
|
# omarchy:hidden=true
|
|
|
|
# Runs on tty1 via omarchy-provision-owner.service when /var/lib/omarchy/provisioning/pending
|
|
# exists — the state a deferred-provisioning ISO install or omarchy-system-factory-reset leaves
|
|
# behind. Asks for the user (the configurator's Step 2), creates it with the
|
|
# groups system setup recorded, finalizes it offline from the stashed Node
|
|
# tarball, re-keys LUKS from the throwaway install passphrase to the user's
|
|
# password, and hands off to SDDM.
|
|
|
|
set -euo pipefail
|
|
|
|
PROVISIONING_DIR=/var/lib/omarchy/provisioning
|
|
OMARCHY_PATH="${OMARCHY_PATH:-/usr/share/omarchy}"
|
|
LOG_FILE=/var/log/omarchy-provision-owner.log
|
|
|
|
if (( EUID != 0 )); then
|
|
echo "Error: omarchy-provision-owner must run as root" >&2
|
|
exit 1
|
|
fi
|
|
|
|
[[ -f $PROVISIONING_DIR/pending ]] || exit 0
|
|
|
|
# Never set up a user on a half-wiped system: while a factory wipe is still
|
|
# pending (i.e. it failed this boot), stand down and let it retry next boot.
|
|
if [[ -f $PROVISIONING_DIR/wipe-pending ]]; then
|
|
echo "omarchy-provision-owner: factory wipe still pending; not running user setup" >&2
|
|
exit 1
|
|
fi
|
|
|
|
export PATH="$OMARCHY_PATH/bin:$PATH"
|
|
|
|
# The shared setup form — the same questions, prompts, and validation the ISO
|
|
# configurator's user step asks. The ISO vendors this very file out of the
|
|
# runtime package it bundles, so an install and the first boot that finishes it
|
|
# can never offer different layouts or accept different usernames.
|
|
source "$OMARCHY_PATH/install/provisioning/setup-form.sh"
|
|
|
|
# Unlike a fresh install target, this machine already has accounts; a pinned
|
|
# resume (below) bypasses the prompt entirely.
|
|
omarchy_username_taken() { getent passwd "$1" >/dev/null; }
|
|
|
|
LOGO_PATH="$OMARCHY_PATH/logo.txt"
|
|
LOGO_WIDTH=$(awk '{ if (length > max) max = length } END { print max+0 }' "$LOGO_PATH" 2>/dev/null || echo 0)
|
|
LOGO_HEIGHT=$(wc -l <"$LOGO_PATH" 2>/dev/null || echo 0)
|
|
(( LOGO_WIDTH > 0 )) || LOGO_WIDTH=81
|
|
(( LOGO_HEIGHT > 0 )) || LOGO_HEIGHT=1
|
|
|
|
export GUM_CONFIRM_PROMPT_FOREGROUND="6"
|
|
export GUM_CONFIRM_SELECTED_FOREGROUND="0"
|
|
export GUM_CONFIRM_SELECTED_BACKGROUND="2"
|
|
export GUM_CONFIRM_UNSELECTED_FOREGROUND="7"
|
|
export GUM_CONFIRM_UNSELECTED_BACKGROUND="0"
|
|
|
|
# Match the first-boot console font to the ISO installer's apparent text size.
|
|
# The installer renders on GRUB's low-resolution console (gfxpayload=keep, on
|
|
# the ~768-row EFI GOP mode) where the default 8x16 font fills the screen. The
|
|
# installed system reaches native KMS resolution, where 8x16 is tiny — so
|
|
# first-boot provisioning looked far smaller than the installer it continues.
|
|
#
|
|
# Pick the kbd console font whose row count lands closest to that installer feel
|
|
# (~48 rows), but never one wide enough to wrap the 81-column logo. On a console
|
|
# that is already installer-sized (low resolution) this lands on the default
|
|
# font, i.e. a no-op. All three fonts ship with kbd, so there's no dependency.
|
|
scale_console_font() {
|
|
[[ $(tty 2>/dev/null) == /dev/tty* ]] || return 0
|
|
|
|
# Pick the console font empirically: apply each candidate, read the columns
|
|
# fbcon actually hands back, and keep the one whose row count lands nearest a
|
|
# ~48-row target while still leaving room for the 81-column logo. Measuring
|
|
# the real result beats computing from /sys/class/graphics/fb0/virtual_size,
|
|
# which under virgl can report a size the text console never actually reaches —
|
|
# that mismatch is what wrapped the logo into the top-left corner.
|
|
local target_rows=48
|
|
local fonts=("default8x16" "sun12x22" "latarcyrheb-sun32")
|
|
local best="" best_diff=999999 name rows cols diff
|
|
for name in "${fonts[@]}"; do
|
|
setfont "$name" 2>/dev/null || continue
|
|
read -r rows cols < <(stty size </dev/tty 2>/dev/null || printf '0 0\n')
|
|
[[ $rows =~ ^[0-9]+$ && $cols =~ ^[0-9]+$ ]] || continue
|
|
(( cols > LOGO_WIDTH )) || continue # must clear the 81-col logo
|
|
diff=$(( rows > target_rows ? rows - target_rows : target_rows - rows ))
|
|
(( diff < best_diff )) && { best_diff=$diff; best="$name"; }
|
|
done
|
|
# Fall back to the narrowest font if nothing cleared the logo width, so the
|
|
# form stays usable even on an unexpectedly tiny console.
|
|
setfont "${best:-default8x16}" 2>/dev/null || true
|
|
}
|
|
|
|
# Same Tokyo Night VT palette the ISO configurator sets, so the first-boot
|
|
# form looks like a continuation of the install.
|
|
set_tokyo_night_colors() {
|
|
[[ $(tty 2>/dev/null) == /dev/tty* ]] || return 0
|
|
echo -en "\e]P01a1b26"; echo -en "\e]P1f7768e"; echo -en "\e]P29ece6a"
|
|
echo -en "\e]P3e0af68"; echo -en "\e]P47aa2f7"; echo -en "\e]P5bb9af7"
|
|
echo -en "\e]P67dcfff"; echo -en "\e]P7a9b1d6"; echo -en "\e]P8414868"
|
|
echo -en "\e]P9f7768e"; echo -en "\e]PA9ece6a"; echo -en "\e]PBe0af68"
|
|
echo -en "\e]PC7aa2f7"; echo -en "\e]PDbb9af7"; echo -en "\e]PE7dcfff"
|
|
echo -en "\e]PFc0caf5"
|
|
echo -en "\033[0m"
|
|
clear
|
|
}
|
|
|
|
measure_terminal() {
|
|
TERM_WIDTH=$(stty size 2>/dev/null </dev/tty | awk '{print $2}')
|
|
(( TERM_WIDTH > 0 )) || TERM_WIDTH=${COLUMNS:-80}
|
|
|
|
PADDING_LEFT=$(((TERM_WIDTH - LOGO_WIDTH) / 2))
|
|
(( PADDING_LEFT < 0 )) && PADDING_LEFT=0
|
|
PADDING_LEFT_SPACES=$(printf "%*s" "$PADDING_LEFT" "")
|
|
|
|
local padding="0 0 0 $PADDING_LEFT"
|
|
export GUM_CHOOSE_PADDING="$padding"
|
|
export GUM_INPUT_PADDING="$padding"
|
|
export GUM_SPIN_PADDING="$padding"
|
|
export GUM_TABLE_PADDING="$padding"
|
|
export GUM_CONFIRM_PADDING="$padding"
|
|
}
|
|
|
|
clear_logo() {
|
|
measure_terminal
|
|
printf "\033[H\033[2J"
|
|
gum style --foreground 2 --padding "1 0 0 $PADDING_LEFT" "$(<"$LOGO_PATH")"
|
|
}
|
|
|
|
step() {
|
|
clear_logo
|
|
echo
|
|
gum style --padding "0 0 0 $PADDING_LEFT" "$1"
|
|
echo
|
|
}
|
|
|
|
say() {
|
|
gum style --padding "0 0 0 $PADDING_LEFT" "$@"
|
|
}
|
|
|
|
notice() {
|
|
clear_logo
|
|
echo
|
|
gum spin --spinner "pulse" --title "$1" -- sleep "${2:-2}"
|
|
echo
|
|
}
|
|
|
|
log_step() {
|
|
echo "[$(date '+%Y-%m-%d %H:%M:%S')] oem-setup: $1" >>"$LOG_FILE"
|
|
}
|
|
|
|
# ── Setup progress screen ────────────────────────────────────────────────────
|
|
#
|
|
# A port of the ISO install dashboard's renderer, so first-boot account setup
|
|
# looks like a continuation of the install: same logo header, same 34-cell
|
|
# bar, same rotating tips. Position = max(floor, work) in
|
|
# per-mille, monotonic; the floor is asymptotic per phase band and the work
|
|
# signal counts finalize-user's run_logged scripts in the log.
|
|
|
|
CSI=$'\033['
|
|
RESET="${CSI}0m"
|
|
DIM="${CSI}2m"
|
|
HIDE_CURSOR="${CSI}?25l"
|
|
SHOW_CURSOR="${CSI}?25h"
|
|
CLEAR="${CSI}2J${CSI}H"
|
|
CLEAR_LINE="${CSI}2K"
|
|
CLEAR_TO_END="${CSI}J"
|
|
GREEN="${CSI}32m"
|
|
WHITE="${CSI}37m"
|
|
DARK="${CSI}90m"
|
|
|
|
STATE_FILE=/run/omarchy-provision-owner.state
|
|
FINALIZE_WARNING_FLAG=/run/omarchy-provision-owner.finalize-warning
|
|
DYNAMIC_ROW=$((LOGO_HEIGHT + 3))
|
|
|
|
tips=(
|
|
"Super + Space opens the Omarchy menu for apps, settings, and more"
|
|
"Super + K shows all the key bindings"
|
|
"Super is the Windows or command key on your keyboard"
|
|
"Use Xournal++ to sign PDFs"
|
|
"Share files with phones and laptops using LocalSend"
|
|
"Turn any website into an app with Install > Web App in the menu"
|
|
"Super + Return opens a terminal, Super + Shift + Return the browser"
|
|
"Edit images with Pinta, videos with Kdenlive, docs with LibreOffice"
|
|
"Super + Ctrl + Print grabs text off the screen with OCR"
|
|
"Print takes a screenshot, Alt + Print records the screen"
|
|
"Set a reminder with Super + Ctrl + R"
|
|
"Switch themes from Style > Theme in the Omarchy menu"
|
|
"Double-click the menu bar to make it transparent"
|
|
"Run a full Windows VM via Install > Windows in the menu"
|
|
"Super + Ctrl + V opens the clipboard manager"
|
|
"Super + 1 through 0 switches workspaces, add Shift to bring the window"
|
|
"Super + Print picks a color from anywhere on screen"
|
|
"Keep the system fresh with Update in the Omarchy menu"
|
|
)
|
|
|
|
term_cols() {
|
|
local cols
|
|
cols=$(stty size 2>/dev/null </dev/tty | awk '{print $2}')
|
|
[[ $cols =~ ^[0-9]+$ ]] && (( cols > 0 )) || cols=${COLUMNS:-80}
|
|
printf '%s' "$cols"
|
|
}
|
|
|
|
# A fingerprint of the console geometry: the VT size plus the framebuffer's
|
|
# identity and pixel size. On a fresh first boot the VT can come up in a
|
|
# transitional ~80x25 mode and only widen to the real resolution a second or
|
|
# more later, when virtio-gpu's KMS takes over (or the SDL window's size lands).
|
|
# Watching this signature settle — rather than trusting one early reading — is
|
|
# what keeps the greeter from measuring that transient and rendering into it.
|
|
console_signature() {
|
|
local size fb_size="" fb_name=""
|
|
size=$(stty size 2>/dev/null </dev/tty) || return 1
|
|
[[ $size =~ ^[0-9]+\ [0-9]+$ ]] || return 1
|
|
[[ -r /sys/class/graphics/fb0/virtual_size ]] && fb_size=$(<"/sys/class/graphics/fb0/virtual_size")
|
|
[[ -r /sys/class/graphics/fb0/name ]] && fb_name=$(<"/sys/class/graphics/fb0/name")
|
|
printf '%s|%s|%s' "$size" "$fb_name" "$fb_size"
|
|
}
|
|
|
|
# Block until the console signature holds unchanged for a genuine quiet stretch
|
|
# (quiet_samples * 100ms), giving up after max_samples * 100ms. Returns 0 once
|
|
# quiet, 1 on timeout.
|
|
wait_console_stable() {
|
|
local max_samples="${1:-100}" quiet_samples="${2:-15}"
|
|
local previous="" current="" quiet=0 i
|
|
for ((i = 0; i < max_samples; i++)); do
|
|
current=$(console_signature 2>/dev/null || true)
|
|
if [[ -n $current && $current == "$previous" ]]; then
|
|
quiet=$((quiet + 1))
|
|
(( quiet >= quiet_samples )) && return 0
|
|
else
|
|
previous=$current
|
|
quiet=0
|
|
fi
|
|
sleep 0.1
|
|
done
|
|
return 1
|
|
}
|
|
|
|
repeat() {
|
|
local char="$1" count="$2" out="" i
|
|
for ((i = 0; i < count; i++)); do out+="$char"; done
|
|
printf '%s' "$out"
|
|
}
|
|
|
|
left_padding() {
|
|
local width="${1:-$LOGO_WIDTH}" cols pad
|
|
cols=$(term_cols)
|
|
pad=$(((cols - width) / 2))
|
|
(( pad < 0 )) && pad=0
|
|
printf '%*s' "$pad" ''
|
|
}
|
|
|
|
visible_len() {
|
|
local text="$1"
|
|
text="$(printf '%b' "$text" | sed -E $'s/\x1b\\[[0-9;?]*[A-Za-z]//g')"
|
|
printf '%s' "${#text}"
|
|
}
|
|
|
|
blank_line() { printf '\r%s\n' "$CLEAR_LINE"; }
|
|
|
|
line_at() {
|
|
local width="${1:-$LOGO_WIDTH}" indent="${2:-0}"
|
|
shift 2
|
|
printf '\r%s%s%*s' "$CLEAR_LINE" "$(left_padding "$width")" "$indent" ''
|
|
printf '%b' "$*"
|
|
}
|
|
|
|
center() {
|
|
local text="$1" width="${2:-$LOGO_WIDTH}" len inner_pad
|
|
len="$(visible_len "$text")"
|
|
inner_pad=$(((width - len) / 2))
|
|
(( inner_pad < 0 )) && inner_pad=0
|
|
printf '\r%s%s%*s%b%s\n' "$CLEAR_LINE" "$(left_padding "$width")" "$inner_pad" '' "$text" "$RESET"
|
|
}
|
|
|
|
render_logo() {
|
|
local pad line
|
|
pad="$(left_padding "$LOGO_WIDTH")"
|
|
while IFS= read -r line; do
|
|
printf '\r%s%s%b%s%b\n' "$CLEAR_LINE" "$pad" "$GREEN" "$line" "$RESET"
|
|
done <"$LOGO_PATH"
|
|
}
|
|
|
|
progress_bar() {
|
|
local pm="$1" width="${2:-34}" filled empty
|
|
(( pm < 0 )) && pm=0
|
|
(( pm > 1000 )) && pm=1000
|
|
filled=$((pm * width / 1000))
|
|
empty=$((width - filled))
|
|
printf '%s%s%s%s%s' "$WHITE" "$(repeat █ "$filled")" "$DARK" "$(repeat ░ "$empty")" "$RESET"
|
|
}
|
|
|
|
# Monotonic clock so an NTP step during setup cannot jump the bar.
|
|
set_now() {
|
|
local up rest
|
|
if read -r up rest </proc/uptime 2>/dev/null && [[ $up == [0-9]* ]]; then
|
|
NOW=${up%%.*}
|
|
else
|
|
NOW=$EPOCHSECONDS
|
|
fi
|
|
return 0
|
|
}
|
|
|
|
# One tip per 8 seconds, elapsed-time driven like the install dashboard.
|
|
current_tip() {
|
|
printf '%s' "${tips[$(((NOW - SETUP_T0) / 8 % ${#tips[@]}))]}"
|
|
}
|
|
|
|
SETUP_POS=10
|
|
SETUP_PHASE=""
|
|
SETUP_PHASE_T0=0
|
|
SETUP_T0=0
|
|
NOW=0
|
|
FINALIZE_BASE=-1
|
|
FINALIZE_TOTAL=$(grep -c '^run_logged' "$OMARCHY_PATH/install/user/all.sh" 2>/dev/null || echo 0)
|
|
|
|
# Whether this boot will re-key LUKS (encrypted installs stage a throwaway key).
|
|
# The re-key rebuilds the UKI and is the slowest single step, so it needs a wide
|
|
# band of its own; unencrypted installs skip it and let finalize take the room.
|
|
REKEY_PENDING=false
|
|
[[ -f $PROVISIONING_DIR/luks-key ]] && REKEY_PENDING=true
|
|
|
|
# Per-mille bands per phase: "lo hi tau". tau shapes the asymptotic time floor;
|
|
# it is not a duration prediction. A wide band moves visibly; a narrow one looks
|
|
# stuck. Skipped phases leave a gap the next band's floor crosses on its own.
|
|
phase_band() {
|
|
if $REKEY_PENDING; then
|
|
# Encrypted: finalize is quick, the LUKS re-key (UKI rebuild) is the long
|
|
# pole — give it nearly half the bar so it keeps moving while it works.
|
|
case $1 in
|
|
finalize) echo "80 480 40" ;;
|
|
rekey) echo "480 950 30" ;;
|
|
boot) echo "950 990 20" ;;
|
|
done) echo "1000 1000 1" ;;
|
|
*) echo "10 80 3" ;;
|
|
esac
|
|
else
|
|
# Unencrypted: finalize is the dominant step.
|
|
case $1 in
|
|
finalize) echo "80 900 45" ;;
|
|
boot) echo "900 990 20" ;;
|
|
done) echo "1000 1000 1" ;;
|
|
*) echo "10 80 3" ;;
|
|
esac
|
|
fi
|
|
}
|
|
|
|
setup_progress() {
|
|
local phase lo hi tau t span floor work completed
|
|
phase=$(cat "$STATE_FILE" 2>/dev/null || true)
|
|
[[ -n $phase ]] || phase=account
|
|
|
|
if [[ $phase != "$SETUP_PHASE" ]]; then
|
|
SETUP_PHASE=$phase
|
|
SETUP_PHASE_T0=$NOW
|
|
FINALIZE_BASE=-1
|
|
fi
|
|
|
|
read -r lo hi tau <<<"$(phase_band "$phase")"
|
|
(( lo < SETUP_POS )) && lo=$SETUP_POS
|
|
|
|
t=$((NOW - SETUP_PHASE_T0))
|
|
span=$((hi - lo))
|
|
floor=$lo
|
|
(( span > 1 )) && floor=$((lo + (span - 1) * t / (t + tau)))
|
|
|
|
work=0
|
|
if [[ $phase == "finalize" ]] && (( FINALIZE_TOTAL > 0 )); then
|
|
completed=$(grep -cE '] (Completed|Failed): ' "$LOG_FILE" 2>/dev/null || true)
|
|
[[ $completed =~ ^[0-9]+$ ]] || completed=0
|
|
(( FINALIZE_BASE < 0 )) && FINALIZE_BASE=$completed
|
|
completed=$((completed - FINALIZE_BASE))
|
|
(( completed < 0 )) && completed=0
|
|
(( completed > FINALIZE_TOTAL )) && completed=$FINALIZE_TOTAL
|
|
work=$((lo + (hi - lo) * completed / FINALIZE_TOTAL))
|
|
fi
|
|
|
|
(( floor > SETUP_POS )) && SETUP_POS=$floor
|
|
(( work > SETUP_POS )) && SETUP_POS=$work
|
|
(( SETUP_POS > 1000 )) && SETUP_POS=1000
|
|
return 0
|
|
}
|
|
|
|
render_setup_static() {
|
|
printf '%s%s' "$HIDE_CURSOR" "$CLEAR"
|
|
blank_line
|
|
render_logo
|
|
blank_line
|
|
}
|
|
|
|
render_setup_dynamic() {
|
|
set_now
|
|
setup_progress
|
|
printf '%s%d;1H' "$CSI" "$DYNAMIC_ROW"
|
|
center "Setting up your machine" "$LOGO_WIDTH"
|
|
blank_line
|
|
line_at "$LOGO_WIDTH" $(((LOGO_WIDTH - 34) / 2)) ""
|
|
progress_bar "$SETUP_POS" 34
|
|
printf '\n'
|
|
blank_line
|
|
center "${DIM}Tip:${RESET} ${GREEN}$(current_tip)${RESET}" "$LOGO_WIDTH"
|
|
printf '%s' "$CLEAR_TO_END"
|
|
}
|
|
|
|
# The first thing a new owner sees, shown once before the keyboard step:
|
|
# the logo (vertically centered like the boot logo) running a looping ColorShift,
|
|
# the Omarchy tagline, and a hint. Return skips ahead into setup at any time.
|
|
greeter_screen() {
|
|
local anim="" drawn_sig cur_sig resized=0
|
|
|
|
# Paint the whole splash for the console's *current* geometry. Kept in a
|
|
# nested function so the wait loop below can repaint it verbatim if the VT
|
|
# resizes out from under us: a late resize (virtio-gpu KMS handoff, or the SDL
|
|
# window's size arriving) scrolls the old frame into the top-left and resets
|
|
# the DEC saved cursor ttfx paints from — exactly the tiled/garbled logo we saw
|
|
# on a fresh first boot. Redrawing on every resize beats any fixed-length
|
|
# startup wait, which can only ever guess when the console has stopped moving.
|
|
_greeter_draw() {
|
|
local rows cols top content_h logo_row tagline_row hint_row
|
|
local tagline hint tpad hpad pad line i
|
|
|
|
cols=$(term_cols)
|
|
rows=$(stty size 2>/dev/null </dev/tty | awk '{print $1}')
|
|
[[ $rows =~ ^[0-9]+$ ]] || rows=${LINES:-24}
|
|
|
|
tagline="Beautiful, Modern & Opinionated Linux by DHH"
|
|
hint="Press Return to Start Setup"
|
|
|
|
printf '%s%s' "$HIDE_CURSOR" "$CLEAR"
|
|
|
|
# Console still too narrow for the 81-column logo (a transient small mode):
|
|
# skip the logo and animation rather than wrap them into mush — just center
|
|
# the words. The redraw loop repaints the full splash once the VT widens.
|
|
if (( cols <= LOGO_WIDTH )); then
|
|
local mid=$(( rows / 2 ))
|
|
tpad=$(( (cols - ${#tagline}) / 2 )); (( tpad < 0 )) && tpad=0
|
|
hpad=$(( (cols - ${#hint}) / 2 )); (( hpad < 0 )) && hpad=0
|
|
printf '%s%d;%dH%s' "$CSI" "$mid" "$((tpad + 1))" "$tagline"
|
|
printf '%s%d;%dH%s%s%s' "$CSI" "$((mid + 2))" "$((hpad + 1))" "$DIM" "$hint" "$RESET"
|
|
return 0
|
|
fi
|
|
|
|
# logo + blank + tagline + blank + hint
|
|
content_h=$(( LOGO_HEIGHT + 4 ))
|
|
top=$(( (rows - content_h) / 2 )); (( top < 0 )) && top=0
|
|
logo_row=$(( top + 1 ))
|
|
tagline_row=$(( top + LOGO_HEIGHT + 2 ))
|
|
hint_row=$(( top + LOGO_HEIGHT + 4 ))
|
|
|
|
# Draw each logo row at an explicit column so nothing can wrap it even if a
|
|
# measurement is off by one; left_padding centers it for the current width.
|
|
pad="$(left_padding "$LOGO_WIDTH")"
|
|
i=0
|
|
while IFS= read -r line; do
|
|
printf '%s%d;1H%s%b%s%b' "$CSI" "$((logo_row + i))" "$pad" "$GREEN" "$line" "$RESET"
|
|
i=$((i + 1))
|
|
done <"$LOGO_PATH"
|
|
|
|
tpad=$(( (cols - ${#tagline}) / 2 )); (( tpad < 0 )) && tpad=0
|
|
printf '%s%d;%dH%s' "$CSI" "$tagline_row" "$((tpad + 1))" "$tagline"
|
|
|
|
hpad=$(( (cols - ${#hint}) / 2 )); (( hpad < 0 )) && hpad=0
|
|
printf '%s%d;%dH%s%s%s' "$CSI" "$hint_row" "$((hpad + 1))" "$DIM" "$hint" "$RESET"
|
|
|
|
# ColorShift the logo: a green base (indexed color 2) with a cyan accent (6)
|
|
# drifting through, settling on green. Indexed ANSI colors, not hex — the
|
|
# framebuffer console can't render ttfx's truecolor faithfully (it crushes the
|
|
# palette to a muddy lavender), but the 16 indexed colors map to the Tokyo
|
|
# Night palette and render true. One long-running invocation (many cycles) so
|
|
# it never restarts — a restart is what flashed. The effect reads from
|
|
# /dev/null so it never swallows the Return the foreground read waits on;
|
|
# --reuse-canvas paints upward from the saved cursor, anchored one row below
|
|
# the logo to repaint exactly the rows drawn above. --canvas-width is cols-1
|
|
# to stay off the autowrap column.
|
|
printf '%s%d;1H\0337' "$CSI" "$((logo_row + LOGO_HEIGHT))"
|
|
# Run ttfx directly (not inside a `while` subshell) so $anim is ttfx's own
|
|
# PID: killing a wrapping subshell would orphan ttfx, which then keeps
|
|
# painting the logo over the keyboard step. --cycles is high enough that it
|
|
# never ends on its own before Return.
|
|
ttfx -i "$LOGO_PATH" \
|
|
--canvas-width "$((cols - 1))" \
|
|
--anchor-text c \
|
|
--frame-rate 60 \
|
|
--reuse-canvas \
|
|
colorshift \
|
|
--gradient-stops 2 10 6 10 \
|
|
--gradient-frames 3 \
|
|
--cycles 1000 \
|
|
--final-gradient-stops 2 \
|
|
</dev/null >/dev/tty 2>/dev/null &
|
|
anim=$!
|
|
}
|
|
|
|
_greeter_kill_anim() {
|
|
[[ -n ${anim:-} ]] || return 0
|
|
# Guard both: `kill` returns non-zero if ttfx already exited (crash, or a
|
|
# resize race), and `wait` reports ttfx's kill signal (143) — either would
|
|
# abort provisioning under `set -e` and drop straight to the login screen.
|
|
kill "$anim" 2>/dev/null || true
|
|
wait "$anim" 2>/dev/null || true
|
|
anim=""
|
|
}
|
|
|
|
# Let the console settle before the first paint, then size the font to it.
|
|
wait_console_stable 100 15 || true
|
|
scale_console_font
|
|
wait_console_stable 30 5 || true
|
|
|
|
trap 'resized=1' WINCH
|
|
|
|
_greeter_draw
|
|
drawn_sig=$(console_signature 2>/dev/null || true)
|
|
|
|
# Wait for Return, but keep watching the geometry. On any resize (SIGWINCH or
|
|
# a changed signature) tear the animation down, settle, re-fit the font, and
|
|
# repaint — so a resize arriving five seconds in looks the same as one that
|
|
# never happened.
|
|
while true; do
|
|
if IFS= read -r -t 0.2 _ </dev/tty; then
|
|
break
|
|
fi
|
|
cur_sig=$(console_signature 2>/dev/null || true)
|
|
if (( resized )) || [[ -n $cur_sig && $cur_sig != "$drawn_sig" ]]; then
|
|
_greeter_kill_anim
|
|
stty sane </dev/tty 2>/dev/null || true
|
|
wait_console_stable 50 5 || true
|
|
scale_console_font
|
|
wait_console_stable 30 5 || true
|
|
_greeter_draw
|
|
drawn_sig=$(console_signature 2>/dev/null || true)
|
|
# Clear last so the font-fitting's own SIGWINCHes don't re-trigger a redraw.
|
|
resized=0
|
|
fi
|
|
done
|
|
|
|
trap - WINCH
|
|
_greeter_kill_anim
|
|
# ttfx leaves the tty in raw/no-echo mode when killed; restore it or the gum
|
|
# prompts in the keyboard step that follows silently die. Then clear the
|
|
# leftover animation frame.
|
|
stty sane </dev/tty 2>/dev/null || true
|
|
printf '%s%s%s' "$RESET" "$CLEAR" "$SHOW_CURSOR"
|
|
}
|
|
|
|
# The keyboard step the ISO configurator runs — deferred to first boot for OEM
|
|
# installs, so the machine's owner picks their own layout. Applied immediately
|
|
# (live VT + persisted) so the password typed next, and the LUKS re-key below,
|
|
# use the chosen layout.
|
|
keyboard_form() {
|
|
local status
|
|
|
|
while true; do
|
|
step "Let's setup your keyboard..."
|
|
omarchy_prompt_keyboard && status=0 || status=$?
|
|
((status == 0)) && break
|
|
|
|
# Esc means "back", and nothing precedes the first screen, so re-ask.
|
|
((status == OMARCHY_FORM_BACK)) && continue
|
|
|
|
# Ctrl+C is the way out of a screen the owner cannot get past. Rebooting is
|
|
# safe but not an escape from setup: this service runs again at next boot,
|
|
# and encrypted machines still auto-unlock from the staged keyfile until the
|
|
# re-key below. Confirm it so a stray Ctrl+C doesn't bounce the machine.
|
|
confirm_reboot && exec systemctl reboot
|
|
done
|
|
|
|
apply_keyboard "$keyboard"
|
|
}
|
|
|
|
confirm_reboot() {
|
|
clear_logo
|
|
echo
|
|
say "Setup starts again after the reboot."
|
|
echo
|
|
gum confirm --affirmative "Yes, reboot" --negative "No, keep setting up" "Reboot this machine?"
|
|
}
|
|
|
|
# Load the layout on the live VT and persist it for the installed system.
|
|
# systemd-firstboot writes both the console KEYMAP and the XKB layout Hyprland
|
|
# reads, matching what the ISO's configure_keyboard does at install time. A
|
|
# keymap localectl doesn't know keeps the default rather than failing (defensive;
|
|
# the picker no longer offers any such layout).
|
|
apply_keyboard() {
|
|
local keymap="$1"
|
|
[[ $(tty 2>/dev/null) == /dev/tty* ]] && loadkeys "$keymap" 2>/dev/null || true
|
|
|
|
if localectl --no-pager list-keymaps 2>/dev/null | grep -qix "$keymap"; then
|
|
systemd-firstboot --keymap="$keymap" --force >>"$LOG_FILE" 2>&1 || \
|
|
localectl set-keymap "$keymap" >>"$LOG_FILE" 2>&1 || \
|
|
log_step "could not persist keymap $keymap"
|
|
else
|
|
log_step "keymap $keymap unknown to localectl; keeping the default"
|
|
fi
|
|
}
|
|
|
|
# The same username/password/name/email form as the ISO configurator's Step 2.
|
|
user_form() {
|
|
step "Let's setup your user account..."
|
|
|
|
# A prior attempt that already created the account pins the username, so a
|
|
# retry cannot strand that account by choosing a different name.
|
|
if [[ -f $PROVISIONING_DIR/setup-user ]]; then
|
|
username=$(<"$PROVISIONING_DIR/setup-user")
|
|
say "Continuing setup for user: $username"
|
|
echo
|
|
else
|
|
omarchy_prompt_username || return $?
|
|
fi
|
|
|
|
omarchy_prompt_password || return $?
|
|
omarchy_prompt_identity || return $?
|
|
|
|
# Hostname and timezone are deferred to first boot with the rest of the user
|
|
# step: the deferred install seeds neutral placeholders (omarchy/UTC) and the
|
|
# owner overwrites them here.
|
|
omarchy_prompt_hostname || return $?
|
|
|
|
step "Let's set your timezone..."
|
|
omarchy_prompt_timezone || return $?
|
|
}
|
|
|
|
confirm_form() {
|
|
clear_logo
|
|
echo
|
|
echo -e "Field,Value
|
|
Keyboard,${keyboard_label:-English (US)}
|
|
Username,$username
|
|
Password,$(printf "%${#password}s" | tr ' ' '*')
|
|
Full name,${full_name:-[Skipped]}
|
|
Email address,${email_address:-[Skipped]}
|
|
Hostname,${hostname:-omarchy}
|
|
Timezone,${timezone:-UTC}" |
|
|
gum table -s "," -p | sed "s/^/${PADDING_LEFT_SPACES}/"
|
|
|
|
echo
|
|
gum confirm --negative "No, change it" "Does this look right?"
|
|
}
|
|
|
|
# Groups recorded by omarchy-setup-system's scripts at install time
|
|
# (/var/lib/omarchy/provisioning/groups), filtered to groups that exist on this system.
|
|
user_groups() {
|
|
local groups="wheel" group
|
|
if [[ -f $PROVISIONING_DIR/groups ]]; then
|
|
while IFS= read -r group; do
|
|
[[ -n $group ]] || continue
|
|
getent group "$group" >/dev/null || continue
|
|
[[ ",$groups," == *",$group,"* ]] || groups+=",$group"
|
|
done <"$PROVISIONING_DIR/groups"
|
|
fi
|
|
echo "$groups"
|
|
}
|
|
|
|
# Resolve the crypto_LUKS partition backing the root, or return non-zero if
|
|
# the root is not on LUKS. Prefers the cmdline cryptdevice= spec (archinstall
|
|
# writes PARTUUID=, the pre-mounted path UUID=), and falls back to walking the
|
|
# device tree for roots reached via rd.luks/crypttab with a plain /dev/mapper
|
|
# root and no cryptdevice=.
|
|
luks_device() {
|
|
local spec
|
|
spec=$(grep -o 'cryptdevice=[^ :]*' /proc/cmdline | head -1 | cut -d= -f2-)
|
|
case $spec in
|
|
UUID=*) echo "/dev/disk/by-uuid/${spec#UUID=}"; return 0 ;;
|
|
PARTUUID=*) echo "/dev/disk/by-partuuid/${spec#PARTUUID=}"; return 0 ;;
|
|
LABEL=*) echo "/dev/disk/by-label/${spec#LABEL=}"; return 0 ;;
|
|
PARTLABEL=*) echo "/dev/disk/by-partlabel/${spec#PARTLABEL=}"; return 0 ;;
|
|
/dev/*) echo "$spec"; return 0 ;;
|
|
esac
|
|
|
|
# No cryptdevice=: walk the root source's ancestors (lsblk -s inverts the
|
|
# tree) for the first crypto_LUKS parent.
|
|
local src part
|
|
src=$(findmnt -no SOURCE / | sed 's/\[.*//')
|
|
[[ -n $src ]] || return 1
|
|
part=$(lsblk -nspo NAME,FSTYPE "$src" 2>/dev/null | awk '$2=="crypto_LUKS"{print $1; exit}')
|
|
[[ -n $part ]] && { echo "$part"; return 0; }
|
|
return 1
|
|
}
|
|
|
|
encrypted_install() {
|
|
luks_device >/dev/null 2>&1
|
|
}
|
|
|
|
create_user() {
|
|
# Pin the username so a retry after a later failure resumes this exact
|
|
# account rather than creating a second privileged one.
|
|
echo "$username" >"$PROVISIONING_DIR/setup-user"
|
|
|
|
if getent passwd "$username" >/dev/null; then
|
|
# Resuming a partially-completed earlier attempt: refresh what the form
|
|
# collected this time around.
|
|
usermod -aG "$(user_groups)" ${full_name:+-c "$full_name"} "$username"
|
|
else
|
|
useradd -m -G "$(user_groups)" -s /bin/bash \
|
|
${full_name:+-c "$full_name"} "$username"
|
|
fi
|
|
|
|
printf '%s:%s\n' "$username" "$password" | chpasswd
|
|
printf '%s:%s\n' root "$password" | chpasswd
|
|
|
|
# deferred-provisioning installs skip archinstall's create_users, which is what normally
|
|
# uncomments %wheel in /etc/sudoers. Always write the drop-in: detecting an
|
|
# existing grant is error-prone (omarchy ships narrow %wheel NOPASSWD rules
|
|
# for specific commands), and a duplicate grant is harmless.
|
|
echo "%wheel ALL=(ALL:ALL) ALL" >/etc/sudoers.d/00-omarchy-wheel
|
|
chmod 440 /etc/sudoers.d/00-omarchy-wheel
|
|
}
|
|
|
|
install_authorized_keys() {
|
|
[[ -f $PROVISIONING_DIR/authorized_keys ]] || return 0
|
|
|
|
local ssh_dir="/home/$username/.ssh"
|
|
mkdir -p "$ssh_dir"
|
|
cp "$PROVISIONING_DIR/authorized_keys" "$ssh_dir/authorized_keys"
|
|
chmod 700 "$ssh_dir"
|
|
chmod 600 "$ssh_dir/authorized_keys"
|
|
chown -R "$username:$username" "$ssh_dir"
|
|
}
|
|
|
|
configure_login() {
|
|
mkdir -p /var/lib/sddm
|
|
printf '[Last]\nSession=omarchy.desktop\nUser=%s\n' "$username" >/var/lib/sddm/state.conf
|
|
chown -R sddm:sddm /var/lib/sddm 2>/dev/null || true
|
|
|
|
# Autologin straight into the desktop after first-boot setup — the owner just
|
|
# authenticated in the form, so we don't make them retype at SDDM.
|
|
mkdir -p /etc/sddm.conf.d
|
|
printf '[Autologin]\nUser=%s\nSession=omarchy.desktop\n' "$username" >/etc/sddm.conf.d/autologin.conf
|
|
|
|
# Encrypted installs keep autologin permanently (the LUKS prompt is the auth
|
|
# boundary). Unencrypted installs autologin only this first boot, then a
|
|
# one-shot service removes the drop-in so later boots use the normal SDDM
|
|
# login and the disk isn't left permanently open.
|
|
encrypted_install || install_autologin_once_cleanup
|
|
}
|
|
|
|
# Install a self-removing service that makes the autologin last exactly one
|
|
# boot — this one, where the owner just authenticated in the wizard. The unit is
|
|
# created now, but graphical.target's job for THIS boot is already computed, so
|
|
# it won't run this boot (this boot autologins). On the NEXT boot it's in the
|
|
# fresh transaction, ordered Before the display manager, so it runs before SDDM
|
|
# reads its config: it removes the autologin drop-in (that boot shows the normal
|
|
# login) and deletes its own unit and enablement symlink. Ordering Before= (not
|
|
# After=) is what makes it deterministic — no sleep/race against SDDM's startup.
|
|
install_autologin_once_cleanup() {
|
|
local unit=omarchy-provision-autologin-once.service
|
|
cat >"/etc/systemd/system/$unit" <<UNIT
|
|
[Unit]
|
|
Description=Drop the first-boot autologin before the next login
|
|
Before=display-manager.service
|
|
ConditionPathExists=/etc/sddm.conf.d/autologin.conf
|
|
|
|
[Service]
|
|
Type=oneshot
|
|
ExecStart=/usr/bin/rm -f /etc/sddm.conf.d/autologin.conf
|
|
ExecStartPost=/usr/bin/rm -f /etc/systemd/system/graphical.target.wants/$unit /etc/systemd/system/$unit
|
|
|
|
[Install]
|
|
WantedBy=graphical.target
|
|
UNIT
|
|
mkdir -p /etc/systemd/system/graphical.target.wants
|
|
ln -sf "../$unit" "/etc/systemd/system/graphical.target.wants/$unit"
|
|
}
|
|
|
|
# Apply the owner's hostname, deferred to first boot with the rest of the user
|
|
# step, overwriting the placeholder the deferred install seeded.
|
|
configure_hostname() {
|
|
[[ -n ${hostname:-} ]] || return 0
|
|
hostnamectl set-hostname "$hostname" 2>&1 ||
|
|
printf '%s\n' "$hostname" >/etc/hostname
|
|
}
|
|
|
|
# Apply the owner's timezone, deferred to first boot with the rest of the user
|
|
# step, overwriting the placeholder (UTC) the deferred install seeded.
|
|
configure_timezone() {
|
|
[[ -n ${timezone:-} ]] || return 0
|
|
if timedatectl set-timezone "$timezone" 2>&1; then
|
|
return 0
|
|
fi
|
|
# Fallback only if the zone file exists, so a bad zone can't point
|
|
# /etc/localtime at nothing and break every localtime read afterward.
|
|
[[ -e /usr/share/zoneinfo/$timezone ]] &&
|
|
ln -sf "/usr/share/zoneinfo/$timezone" /etc/localtime 2>&1 || true
|
|
}
|
|
|
|
finalize_user() {
|
|
local home shell
|
|
home=$(getent passwd "$username" | cut -d: -f6)
|
|
shell=$(getent passwd "$username" | cut -d: -f7)
|
|
|
|
runuser -u "$username" -- env \
|
|
HOME="$home" \
|
|
USER="$username" \
|
|
LOGNAME="$username" \
|
|
SHELL="${shell:-/bin/bash}" \
|
|
OMARCHY_PATH="$OMARCHY_PATH" \
|
|
OMARCHY_INSTALL="$OMARCHY_PATH/install" \
|
|
OMARCHY_SETUP_CONTEXT=provision-owner \
|
|
OMARCHY_USER_NAME="$full_name" \
|
|
OMARCHY_USER_EMAIL="$email_address" \
|
|
OMARCHY_INSTALL_LOG_FILE="$LOG_FILE" \
|
|
OMARCHY_LOG_TO_STDOUT=1 \
|
|
"$OMARCHY_PATH/bin/omarchy-provision-user" --force --first-install
|
|
}
|
|
|
|
# Move the LUKS volume from the throwaway install passphrase to the user's
|
|
# password: add the user's key, kill every other slot (throwaway + any seller
|
|
# keys a reset left behind), then rebuild the UKI without the embedded
|
|
# auto-unlock keyfile.
|
|
#
|
|
# Failing here must be LOUD (abort the attempt, offer retry): silently keeping
|
|
# the staged auto-unlock keyfile would leave the disk effectively unencrypted
|
|
# forever.
|
|
rekey_luks() {
|
|
[[ -f $PROVISIONING_DIR/luks-key ]] || return 0
|
|
|
|
local device
|
|
if ! device=$(luks_device) || [[ ! -e $device ]]; then
|
|
log_step "cannot locate the LUKS device from /proc/cmdline: $(cat /proc/cmdline)"
|
|
say --foreground 1 "Could not locate the LUKS device to re-key."
|
|
return 1
|
|
fi
|
|
|
|
if ! cryptsetup open --test-passphrase --key-file "$PROVISIONING_DIR/luks-key" "$device" 2>>"$LOG_FILE"; then
|
|
log_step "staged LUKS key does not unlock $device"
|
|
say --foreground 1 "The staged LUKS key no longer unlocks $device."
|
|
return 1
|
|
fi
|
|
|
|
# Add the user's key (a retry with a different password just adds another
|
|
# slot; all but the current one are killed once the rebuild succeeds).
|
|
cryptsetup luksAddKey --key-file "$PROVISIONING_DIR/luks-key" "$device" <(printf '%s' "$password")
|
|
|
|
# Rebuild the no-auto-unlock UKI FIRST, keeping the throwaway key and slot as
|
|
# a fallback. Only once that succeeds do we kill the other slots and destroy
|
|
# the staged key — so a limine-update failure leaves a recoverable,
|
|
# still-auto-unlocking state to retry, never a disk locked to a password the
|
|
# user may have just changed.
|
|
rm -f /etc/omarchy/provisioning.key \
|
|
/etc/limine-entry-tool.d/99-omarchy-provisioning-unlock.conf \
|
|
/etc/mkinitcpio.conf.d/99-omarchy-provisioning-key.conf
|
|
reset_limine_config
|
|
if ! limine-update >>"$LOG_FILE" 2>&1; then
|
|
log_step "limine-update failed during re-key; restoring auto-unlock for retry"
|
|
install -Dm600 "$PROVISIONING_DIR/luks-key" /etc/omarchy/provisioning.key
|
|
echo 'KERNEL_CMDLINE[default]+=" cryptkey=rootfs:/etc/omarchy/provisioning.key"' \
|
|
>/etc/limine-entry-tool.d/99-omarchy-provisioning-unlock.conf
|
|
echo 'FILES+=(/etc/omarchy/provisioning.key)' >/etc/mkinitcpio.conf.d/99-omarchy-provisioning-key.conf
|
|
limine-update >>"$LOG_FILE" 2>&1 || true
|
|
return 1
|
|
fi
|
|
|
|
local new_slot slot other_slots
|
|
new_slot=$(cryptsetup open --test-passphrase --verbose --key-file <(printf '%s' "$password") "$device" 2>&1 |
|
|
grep -o 'Key slot [0-9]* unlocked' | grep -o '[0-9]*' | head -1)
|
|
# Retiring the throwaway/seller slots must be all-or-nothing: if we can't
|
|
# identify the user's slot or a kill fails, keep the staged key and retry —
|
|
# never shred it while a slot the seller knows still unlocks the disk.
|
|
if [[ -z $new_slot ]]; then
|
|
log_step "could not identify the user's LUKS slot after re-key; keeping the staged key for retry"
|
|
say --foreground 1 "Could not confirm the LUKS re-key; will retry."
|
|
return 1
|
|
fi
|
|
if ! other_slots=$(cryptsetup luksDump "$device" | awk '/^ +[0-9]+: luks2/ { sub(":", "", $1); print $1 }'); then
|
|
log_step "luksDump failed while retiring slots; keeping the staged key for retry"
|
|
say --foreground 1 "Could not enumerate LUKS slots; will retry."
|
|
return 1
|
|
fi
|
|
for slot in $other_slots; do
|
|
[[ $slot == "$new_slot" ]] && continue
|
|
if ! cryptsetup luksKillSlot -q --key-file <(printf '%s' "$password") "$device" "$slot"; then
|
|
log_step "failed to kill LUKS slot $slot; keeping the staged key for retry"
|
|
say --foreground 1 "Could not remove the throwaway LUKS key; will retry."
|
|
return 1
|
|
fi
|
|
done
|
|
|
|
shred -u "$PROVISIONING_DIR/luks-key" 2>/dev/null || rm -f "$PROVISIONING_DIR/luks-key"
|
|
}
|
|
|
|
# Start the ESP's limine.conf over from the shipped template and drop foreign
|
|
# machine-id state before rebuilding. limine-entry-tool keys OS entries by
|
|
# machine-id: after a factory reset gave this machine a fresh identity, the
|
|
# previous system's entry would survive the rebuild with a stale UKI hash,
|
|
# sort first, and make Limine stop at a hash-mismatch warning.
|
|
esp_path() {
|
|
local esp=""
|
|
if [[ -f /etc/default/limine ]]; then
|
|
esp=$(sed -n 's/^ESP_PATH=["'\'']\?\([^"'\'']*\).*/\1/p' /etc/default/limine | tail -1)
|
|
fi
|
|
echo "${esp:-/boot}"
|
|
}
|
|
|
|
# A factory reset gives the machine a fresh machine-id, but limine-entry-tool
|
|
# keys its limine.conf entries by machine-id — entries from the previous
|
|
# identity would linger and go hash-stale on the first UKI rebuild.
|
|
limine_entries_stale() {
|
|
local esp machine_id
|
|
esp=$(esp_path)
|
|
machine_id=$(cat /etc/machine-id 2>/dev/null || true)
|
|
[[ -f $esp/limine.conf && -n $machine_id ]] || return 1
|
|
# Stale if any foreign machine-id entry lingers, OR if this machine has no
|
|
# entry at all (e.g. a failed earlier rebuild left the entry-less template).
|
|
grep -o 'machine-id=[0-9a-f]*' "$esp/limine.conf" 2>/dev/null |
|
|
grep -qv "machine-id=$machine_id" && return 0
|
|
! grep -q "machine-id=$machine_id" "$esp/limine.conf"
|
|
}
|
|
|
|
reset_limine_config() {
|
|
local esp template found="" machine_id old_id old_ids=""
|
|
esp=$(esp_path)
|
|
|
|
# Only remove machine-ids the old (Omarchy-managed) limine.conf referenced;
|
|
# a shared ESP may hold other installations' machine-id directories.
|
|
if [[ -f $esp/limine.conf ]]; then
|
|
# `|| true`: an entry-less limine.conf (left by a failed earlier rebuild)
|
|
# has no machine-id lines, so grep exits 1 and pipefail would abort the
|
|
# assignment under `set -e` — turning a recoverable retry into a dead loop.
|
|
old_ids=$(grep -o 'machine-id=[0-9a-f]\{32\}' "$esp/limine.conf" | cut -d= -f2 | sort -u || true)
|
|
fi
|
|
|
|
for template in "$OMARCHY_PATH/install/assets/limine/limine.conf" \
|
|
"$OMARCHY_PATH/default/limine/limine.conf"; do
|
|
if [[ -f $template ]]; then
|
|
cp "$template" "$esp/limine.conf"
|
|
found=1
|
|
break
|
|
fi
|
|
done
|
|
if [[ -z $found ]]; then
|
|
log_step "no limine.conf template found; keeping the existing config"
|
|
return 0
|
|
fi
|
|
|
|
machine_id=$(cat /etc/machine-id 2>/dev/null || true)
|
|
for old_id in $old_ids; do
|
|
[[ $old_id == "$machine_id" ]] && continue
|
|
rm -rf "${esp:?}/$old_id"
|
|
done
|
|
}
|
|
|
|
cleanup_oem_state() {
|
|
# Keep groups + packages: omarchy-system-factory-reset's degraded path (machines
|
|
# without @factory) re-arms first-boot setup from the live copies.
|
|
rm -f "$PROVISIONING_DIR/pending" "$PROVISIONING_DIR/authorized_keys" "$PROVISIONING_DIR/setup-user"
|
|
|
|
rm -f /etc/systemd/system/multi-user.target.wants/omarchy-provision-owner.service
|
|
systemctl daemon-reload 2>/dev/null || true
|
|
}
|
|
|
|
# The provisioning work, backgrounded under the progress screen. Phase writes
|
|
# to STATE_FILE drive the bar; all output lands in the log.
|
|
run_provisioning() {
|
|
log_step "creating user $username"
|
|
create_user
|
|
install_authorized_keys
|
|
configure_login
|
|
|
|
log_step "setting hostname to ${hostname:-omarchy}"
|
|
configure_hostname
|
|
|
|
log_step "setting timezone to ${timezone:-UTC}"
|
|
configure_timezone
|
|
|
|
log_step "finalizing user"
|
|
echo finalize >"$STATE_FILE"
|
|
if ! finalize_user; then
|
|
log_step "finalize-user failed (continuing; user can retry after login)"
|
|
touch "$FINALIZE_WARNING_FLAG"
|
|
fi
|
|
|
|
if [[ -f $PROVISIONING_DIR/luks-key ]]; then
|
|
log_step "re-keying LUKS to the user's password"
|
|
echo rekey >"$STATE_FILE"
|
|
rekey_luks
|
|
log_step "LUKS re-key complete"
|
|
fi
|
|
|
|
# After a factory reset on an unencrypted machine nothing above rebuilds the
|
|
# boot entries, so entries keyed to the previous machine identity would
|
|
# linger and go hash-stale on the first UKI rebuild. Refresh them now.
|
|
if limine_entries_stale; then
|
|
log_step "refreshing boot entries for the new machine identity"
|
|
echo boot >"$STATE_FILE"
|
|
reset_limine_config
|
|
limine-update
|
|
fi
|
|
|
|
log_step "cleaning up provisioning state"
|
|
cleanup_oem_state
|
|
log_step "first-boot setup complete"
|
|
}
|
|
|
|
run_setup() {
|
|
local status
|
|
|
|
while true; do
|
|
keyboard_form
|
|
user_form && status=0 || status=$?
|
|
if ((status != 0)); then
|
|
# Esc unwinds to the keyboard step. Ctrl+C is the only other way out of a
|
|
# prompt, and it offers the reboot instead of returning a value.
|
|
((status == OMARCHY_FORM_SIGNAL)) && confirm_reboot && exec systemctl reboot
|
|
continue
|
|
fi
|
|
confirm_form && break
|
|
done
|
|
|
|
touch "$LOG_FILE"
|
|
chmod 600 "$LOG_FILE"
|
|
|
|
rm -f "$FINALIZE_WARNING_FLAG"
|
|
echo account >"$STATE_FILE"
|
|
|
|
run_provisioning >>"$LOG_FILE" 2>&1 &
|
|
local worker=$!
|
|
|
|
set_now
|
|
SETUP_T0=$NOW
|
|
SETUP_PHASE_T0=$NOW
|
|
|
|
render_setup_static
|
|
while kill -0 "$worker" 2>/dev/null; do
|
|
render_setup_dynamic
|
|
sleep 0.5
|
|
done
|
|
|
|
local status=0
|
|
wait "$worker" || status=$?
|
|
printf '%s' "$SHOW_CURSOR"
|
|
(( status == 0 )) || return "$status"
|
|
|
|
# One full-bar frame so the finish doesn't cut in mid-progress.
|
|
echo done >"$STATE_FILE"
|
|
render_setup_dynamic
|
|
sleep 1
|
|
|
|
if [[ -f $FINALIZE_WARNING_FLAG ]]; then
|
|
rm -f "$FINALIZE_WARNING_FLAG"
|
|
clear_logo
|
|
echo
|
|
say --foreground 1 "User finalization reported errors (see $LOG_FILE)."
|
|
say --foreground 1 "Run 'omarchy-provision-user --force' after login to retry."
|
|
sleep 3
|
|
fi
|
|
|
|
# Deferred first boot hands straight off to the display manager: SDDM starts
|
|
# the moment this oneshot exits (Before=display-manager.service) and autologs
|
|
# in on encrypted installs. No timed celebration screen and no "start" button
|
|
# here — that send-off belongs to a direct install, not first-boot setup.
|
|
clear_logo
|
|
echo
|
|
say "Starting Omarchy..."
|
|
sleep 1
|
|
}
|
|
|
|
# A failed first-boot setup must not strand the machine at a user-less login
|
|
# screen. Each attempt runs as its own process — bash ignores errexit inside
|
|
# `while !` conditions, but a child process keeps its own set -e — and failure
|
|
# offers a retry; create_user and friends are idempotent, so retrying is safe.
|
|
if [[ ${1:-} == "--attempt" ]]; then
|
|
run_setup
|
|
exit 0
|
|
fi
|
|
|
|
main() {
|
|
# Font sizing waits for the console to settle, so it lives inside
|
|
# greeter_screen (which owns that settle) rather than running here on a VT
|
|
# that may still be in a transitional mode this early in first boot.
|
|
set_tokyo_night_colors
|
|
greeter_screen
|
|
|
|
while ! "$0" --attempt; do
|
|
clear_logo
|
|
echo
|
|
say --foreground 1 "Setup hit an error (details in $LOG_FILE)."
|
|
echo
|
|
if ! gum confirm --affirmative "Try again" --negative "Drop to console" "Retry first-boot setup?"; then
|
|
# Give an actual usable console: this service owns tty1 (and Conflicts the
|
|
# getty), and on a failed deferred setup there's no user account and root
|
|
# is locked — so exiting would strand the machine with no way in. Exec a
|
|
# root shell on tty1; SDDM starts once it exits.
|
|
say "Dropping to a root shell. Run 'omarchy-provision-owner' to retry setup."
|
|
exec /bin/bash
|
|
fi
|
|
done
|
|
}
|
|
|
|
main
|