@@ -175,8 +175,8 @@ Platform adaptations, each forced by a missing Qt analog:
- Masks as Photoshop's (13.12, `b3419ab`): `addMask` with a selection now reveals it (white inside, black outside, the coverage as drawn) and, `revealing` false, hides it (the coverage inverted), one `Reveal Selection` or `Hide Selection` step; the row menu's Reveal All and Hide All call it as before, so Hide All with a selection hides the selection. `LayerMaskMenu` reads Alt from `QGuiApplication::keyboardModifiers()` when clicked, Swift's `NSApp.currentEvent`, so Alt-click adds the opposite, with Swift's help in Alt's words. The session keeps `viewsMaskAlone` (a getter and a setter that notifies on a change, the badge's write; `EditorSession.h`, defined in `EditorSession.cpp` beside Swift's `didSet`) and `maskAloneLayer()` (Swift's computed property: the view asked, the mask targeted, the active layer with a mask); `isMaskSelected` gains Swift's `didSet` as a private `setIsMaskSelected` (declared in `LayerMask+Session.h`, since `EditorSession.h` sits at 499 lines; defined in `EditorSession.cpp`), which every former write of `m_isMaskSelected` now calls, so targeting the pixels, another layer, a deleted mask or a load ends the view. `maskAloneLayer` and `toggleMaskAlone` live in `LayerMask+Alone.cpp`, since `LayerMask.cpp` already held 495 lines. `toggleMaskAlone` targets the mask through `selectLayerTarget` and shows it unless it already showed; where that refuses and leaves another target, so does the toggle, but with the project busy and the same mask already targeted the refusal is silent and the view still flips, as Swift's does. The canvas's `DisplayState` gains `maskAlone` (the mask asset's `ImageIdentity`, whether or not enabled, since the composite may skip it), and `drawLayers` hands off to `drawMaskAlone` (`EditorCanvas+Masks.cpp`, beside `liveFolderMaskClip`, which moved there to keep `EditorCanvas.cpp` under 500 lines): the canvas filled with the mask's edge tone, then a brush stroke or gradient laid into that mask through `LayerRenderer::drawBrushPreview` (the painted mask's own raster when it has one), else the mask at its displayed placement or the layer's transform, gray where it shows; the crisp zoom path draws through `drawLayers` too. The list's mask thumbnail: Alt's release without a drag calls `toggleMaskAlone`, only inside the thumbnail after a move under `startDragDistance` (4.7's rule; Swift's `dragMaskCopy` toggles on any left-up before a 3-point drag) (Shift no longer toggles there, as Swift's), the tooltip names Alt-click, and the targeted ring is white while that mask shows alone (`setTargeted`'s `alone`; Swift's `maskAloneLayer?.id == layerID` is left out as dead: the ring shows only on the active row, whose layer is the one shown alone). `LayerListFocusTests` and `LayerDragGestureTests` expected Alt-Shift to toggle the mask; they now expect Swift's view. `MaskAloneBadge` (in `UI/LayerMaskMenu`, Swift's file) is 26 points tall, 75% black with a 14% white rim, radius 13: the mask glyph at 11, "Layer Mask" 12 px semibold, the layer's name 12 px at 60% white, elided within 220 points, and an `xmark` button (a new `LayerIcon`, Swift's bold `xmark` as two round-capped strokes) with Swift's tooltip in Alt's words and accessible name, which ends the view. `ContentView` keeps one badge, shown while `maskAloneLayer` holds, in a layout nested in the canvas slot (it starts hidden through `synchronize`, which the constructor runs) (bottom, centred, 14 points up), so the room beside and below it stays the canvas's; Qt child widgets take their own clicks, so Swift's AppKit hosting has no twin. Swift's GPU fix (a mask stroke's grid starting at the mask's background) is the twin's behaviour already: `allocateTile` fills a mask tile with `maskBackground`. Tests: `MaskAloneTests` (Swift's three, plus another layer ending the view and the setter's signal, a stroke and a gradient shown as committed, a disabled and a placed mask, the crisp zoom, the badge's words, place, elision and clicks, the list's Alt-click, Shift ignored and the white ring; the view across undo and redo and when the shown mask is targeted again; a pending pixel gradient on the layer and another layer's pending mask gradient kept out of the view while their commits are posted), `SelectionEditTests` (Swift's renamed two and the scaled layer's hiding mask), `LayersPanelTests::theMaskButtonUsesTheSelection` (plain and Alt clicks with and without a selection, the tooltips, the row's Hide All). Mutants: the session 10 + 1 rerun (the active-layer term of `toggleMaskAlone` pinned by a busy refusal with another layer's mask targeted), equivalent: `maskAloneLayer`'s `m_isMaskSelected` and `layer->mask` terms (every path that clears either clears the view through `setIsMaskSelected`; Swift's guards, kept); `drawMaskAlone` 6 + 3 reruns (the placement pinned off the old box), the stroke's `isMask` and layer terms are live, not equivalent: `resolveGradient` only posts the commit, so a pending pixel gradient, or another layer's mask gradieLine truncated
- Quit mid-edit and Scanlines (13.17, Swift 1.4.4). Quit (`1aad384`): `ProjectWorkspace::settlePendingEdits` twins Swift's: on the tab on screen a pending gradient is applied (`commitGradient`), then a pixel move (`finishPixelMove`), then a filter, Hue/Saturation, Levels, Color Range, the Expand/Contract/Feather panel (`setSelectionAmountOperation(nullopt)`) and the colour picker are cancelled (their Cancel, so nothing un-OK'd lands). It takes a completion callback (Swift's `async`), run from the event loop once both commits have landed, and only while the workspace lives (`QPointer`), the tab kept alive in the callbacks as every workspace flow keeps it. `confirmQuit` refuses at once while the workspace manages (Swift's guard moved there from `applicationShouldTerminate`; the twin's window close reaches `confirmQuit` directly, so this guard is what stops a second close mid-quit), applies open text, settles, and only then asks `canSwitch`; a refusal there (a busy project, a commit still running) is a warning on `omaphoto.app` where Swift beeps. Swift's `gradientEdit != nil` and `pixelMove != nil` tests before awaiting are left out: both twins return (posted) when there is nothing to commit. Swift's `finishAdjustmentEditing(commit: false)` is left out as dead: `cancelFilter`, `cancelHueSaturation` and `cancelLevels`, each called before it, call it first, and an adjustment's editor is always one of those three (its request and original are set and cleared with them; while the editor still renders, `finishAdjustmentEditing` does nothing in Swift either, and `canSwitch` refuses the quit). Tests: `QuitPendingEditsTests` (the tab on screen settled and another left as it is; a quit refused while an adjustment's editor is asked for and not yet rendered, then cancelled once open; Swift's `quittingAppliesAPendingGradient` and `quittingCancelsAnOpenDialog`; a pixel move applied as one `Move Pixels` step; Color Range putting the selection back, the selection-amount panel, the colour picker not taking its colour; an adjustment's editor putting the settings back; a workspace gone mid-settle calling nothing; closing the window applying the gradient before the Save question; a busy project refused with the warning, nothing asked or applied; a second quit while the first asks refused unsettled). Scanlines (`9c99853`, `cd2f998`): `DitherStyle::scanlines` ("Scanlines (CRT)") joins the fourth group; `usesPixelSize` (false for ASCII and Scanlines: no chunky pixels, no Pixel Size or Pixel Shape rows) and `drawsMarks` without Scanlines, as Swift's. `DitherSettings` gains `lineSpacing` (2–32, rounded, 4), `glow` (0–100, 35), `dots` (0–100, 0) and `wobble` (0–64 px, unrounded, 0), normalized as Swift's; the kernel's cell is the line spacing for Scanlines. `kernels/DitherPixels.c/.h` are cd2f998's, with one adaptation: Swift's kernel threads through GCD (`dispatch_apply`) and Apple blocks, which GCC cannot compile. `in_bands` keeps Swift's split (one band under 64 items, else 32) but takes a C function and a context; the three block bodies (the tone pass, the scanlines, the glow) are moved word for word into static functions with context structs (`tone_job`, `scan_job`, `glow_job`), and `__block int failed` is a C11 `atomic_int`. The bands run through `dither_bands`, a C hook defined in `Document/Dither.cpp` on `PoolMap::blocking` (QtConcurrent, so a filter worker lends its pool place). The arithmetic is unchanged; this is a forced difference (GCC has no blocks or GCD), agreed with the coordinator. `bandsDrawAsOneBandDoes` holds 32 bands against one: the top rows of a 300-row picture equal a 62-row picture's, which runs as one band in both passes. `glowing` twins Swift's: sigma `lineSpacing × 3 + 3`, shrunk by `max(1, floor(sigma / 4))`, blurred at `sigma / shrink`, scaled back and added through `dither_glow` at `glow / 100 × 2.5`. Core Image clamps to the extent before it shrinks, so the twin pads the image by the blur's reach (three sigmas, a whole number of shrink steps) with its edges repeated, the far sides filled to a whole number of steps so the shrink and the enlargement are both exactly the shrink (`theGlowScalesBackExactlyOffTheStep`), shrinks that with `QImage::scaled`'s smooth filter (an area average, where Core Image samples bilinearly), blurs with the edge repeated (`PixelAdjust::gaussianBlur`), scales back bilinearly and crops the middle; it stays within three levels of light of Swift's first commit's full-size blur (`theGlowIsTheBlurredLightAtItsAmount`, both axes). The sheet adds Line Spacing (px), Glow (%), Dots (%) and Wobble (px) with Swift's help under Scanlines, and Pixel Size and Pixel Shape follow `usesPixelSize`. Tests: `ScanlinesTests` (Swift's four `DitherTests`; the beam's rows for white, 0.35 gray and a striped average; the style's flags and that pixel size, shape and cell size change nothing; the four settings' clamps, the rows' units and ranges read from the sliders, rounding and defaults; TwLine truncated
- Camera Raw curves as Photoshop's (13.18, Swift 1.4.5: `60d9117`): `kernels/AdjustPixels.c/.h` are 60d9117's: the tone curve runs on red, green and blue alike (`toneLut`, Swift's rename of `lumaLut`), and Refine Saturation means what Swift's now means: 0 the curve per channel, below 0 easing toward the colour scaled to the curved brightness (−100 brightness alone), above 0 pushing the curved colour from its luminance by 1 + the amount. `CameraRawCurveSettings::parametric` twins Swift's: unchanged with all four amounts at 0; otherwise 33 anchors, each `bend` of `bend` (shadows and highlights past the outer dividers, then darks and lights either side of the middle one, gamma curves of strength 1.66), run through the same curve as Image › Curves (`point`), so the regions meet without a corner. `bend` is a private static, as Swift's; `lumaTable` is `toneTable`. The twin's normalization of the dividers (5–90, +2 apart, 98 at most) still clamps what a drag writes. The graph's gestures (`UI/CameraRawColorControls+Curve.cpp`, beside the controls' file) are Swift's single `DragGesture`: a left press picks once (`parametricDrag`: within 18 points of the bottom the nearest divider, the first of equals; elsewhere the region whose tone range holds the press, a tone on a divider joining the region above; `pointDrag`: the point nearest by distance within 0.055, chosen; else a new point there, if fewer than 16, inside x 0.01–0.99 and over a hundredth from every point's x, sorted in, stored and chosen), then `continueDrag` runs at the press and on every left-button move: a point's output follows the pointer, an inner point's x stays a hundredth inside its neighbours, an end keeps its x; a divider follows, shadow below dark − 2 and dark below light − 2; a region's amount is its start minus the drag's height over the graph's times 200, within ±100, rounded. Left out as dead, since normalizing does each (`CameraRawCurveSettings::normalized`: amounts, dividers 5–90, +2 apart, 98 at most, and the repair's 0–1 outputs): Swift's 2–98 clamp of a divider, dark's `shadow + 2` floor and light's `dark + 2` floor, and the 0–1 clamps of a dragged or new point's output (a press inside the graph is inside 0–1 anyway). The new point's `x > 0.01` and `x < 0.99` are dead too: the ends sit at 0 and 1, and a point within a hundredth of any x is refused. `bend`'s `lower > 0` and `upper < 1` are dead (no tone lies below 0 or above 1). The release lets go. Qt can lose a release, so every press picks afresh. A double click is Qt's second press: it picks and drags as a press (Swift's drag sees it too), then on the point page removes the nearest inner point by x within 0.04 and drops the choice, and lets go of the drag (Swift removes at the tap's end, which ends the drag). Swift re-picks on each move while a press picked nothing; with the same start and points it picks nothing again, so the twin leaves that out. The chosen point (Swift's `selected`) draws in `Highlight`, the accent, and the readout shows only while it exists, following the drag; another channel drops the choice and the drag (Swift's `onChange`). The graph's help and Refine Saturation's are Swift's new words. Swift's `CameraRawMixerControls` gains the same `Drag` and `selected` state but never reads it: dead, left out. A fix beyond Swift: Swift holds an inner point exactly a hundredth from its neighbours, where the curve's repair (`x > kept.x + 0.01`) drops it (or drops the next point), and the drag's index then names another point; the twin holds it a billionth further inside, so the repair keeps it and the drag stays on it (`aPointIsPickedByDistanceAndKept`, `endPointsStayAndARealDoubleClickRemoves`, both failing before the fix; `CameraRawColorTests` pins the repair's strict `>` at exactly a hundredth, which the fix rests on). A fix beyond Swift: a preset's points drop the choice (TASKS asks for it; Swift's `applyPreset` keeps the index, which then lights whatever point holds it); Custom changes nothing and keeps it. Tests: `CameraRawCurveTests` (Swift's `parametricCurveIsSmooth`, `parametricCurveMatchesPhotoshop`, `curveDeepensColorLikePhotoshop`; each anchor against the bend written apart, and the smooth curve between; each region bending only its range, dividers at the ends bending nothing; the tone table through the point curve; Refine Saturation at 0 per channel through the table, −100 brightness with the hue kept, −50 halfway, +50 half again from luminance), `CameraRawCurveGraphTests` (a double click's 0.04 reach by x, and one in the divider strip moving the divider; regions lifted and lowered from their start, clamped and rounded, picked once by tone; dividers in the strip, nearest and first of equals, kept ordered and within the settings' limits; points by distance, kept through the drag, a new point added and dragged by the same press, ends moving their outputs alone; refusals near an edge, a point's x, at sixteen; the chosen point lit and read Line truncated
- Held keys, field values and resize snapping in the Move tool (13.13: `bca8f13`, `03d692c`, `686d8c7`, `c459f88`): `UI/HeldModifiers` twins Swift's class, a `QObject` singleton (`shared()`) with one signal, `changed()`. An application event filter reads key presses and releases and left-button presses and releases, Swift's `flagsChanged`, `keyDown`, `leftMouseDown` and `leftMouseUp`; a modifier key's own event sets or clears its bit, since Qt's event may not count it yet. Ctrl, Shift, Alt and Meta count (Swift's Command, Shift, Option, Control). Typing counts as none: Swift's `NSText` first responder is a focus widget with `Qt::WA_InputMethodEnabled`, so a `QLineEdit` and the canvas holding open text alike. `applicationStateChanged` stands for the two activation notifications (inactive clears; active reads `queryKeyboardModifiers`), and a `QMenu`'s `Hide` for `NSMenu.didEndTracking`. `TransformInspector` shows Auto Select as `transformAutoSelect != Ctrl` and the lock as `locksTransformRatio != Shift`, and a click while held writes the other way, as Swift's bindings; it synchronizes on `HeldModifiers::changed` too. Tooltips carry Swift's new words, Ctrl for Command. `transformPressLayer` follows Swift's: `autoSelect = transformAutoSelect != Ctrl`; Ctrl picks the layer under the pointer only with Auto Select off or with Shift (Ctrl+Shift adds either way). `TransformEdit.fromFields` sits last; `beginTransform(persistent, fromFields)` sets it, where Swift writes `transformEdit?.fromFields` in place (the twin's edit is read-only from outside). The bar's `change` opens a non-persistent `fromFields` edit; `finish` commits it, one step, when a field's scrub ends (`NumericScrub`'s `onEnd`) or the field loses focus. A focus borrowed by a menu, a popup or another window in front (`ActiveWindowFocusReason`, new: AppKit keeps the first responder when the app goes to the back) finishes nothing and keeps the typing. Escape in a field throws a `fromFields` edit away before handing the canvas the keys, as the commit says ("Escape still throws the change away", Swift's Cancel key equivalent); a Ctrl+T edit still waits there, as before (6.1's judgment). Flip H, Flip V and Sampling open a `fromFields` edit with no finish of their own, as Swift's do: it applies with the next field's finish, a canvas drag or anything that commits. `beginTransformDrag` commits a `fromFields` edit first, after `transformPressLayer` (so it picks nothing, as Swift's `picks`), so the two stay separate steps. `snappedResizePoint` lives in `Document/Crop.cpp` with Swift's: the edges each axis moves snap on their own to `transformSnapTargets` (the file's `nearest`, the first of ties), the nearer alone when proportional, the pointer nudged by one pixel's measured step; an upright layer only; guides set, or cleared when snapping is off, the drag is no resize or the layer turned. `dragTransform` snaps a resize unless Ctrl is held, proportional as `locksTransformRatio != Shift`. Dead or equivalent: `beginDistort` keeps `fromFields` where Swift's rebuild drops it, but a `fromFields` edit never reaches it (the canvas commits it before any handle drag). Mutants: the group branch's `autoSelect` for `transformAutoSelect` is equivalent (with Ctrl and Auto Select on, both paths return the active layer, unpicked). `snappedResizePoint`'s `before` read from `update(result)` or `update(point)` is equivalent (unlocked axes are independent, and proportional leaves one snap). The edge's tie (`<=`) needs the pointer exactly halfway between the edges, untested. `QRectF::normalized` was dropped as dead (a resize keeps sizes positive and flips instead). Untested paths: the menu `Hide` and the activation's `queryKeyboardModifiers` (offscreen holds no real keyboard state). Tests: `TransformPressTests` (Swift's `commandFlipsAutoSelectWhileHeld` both ways and `commandShiftClickAddsALayerWithAutoSelectOn`, Ctrl outside the active layer, a field edit applied before a canvas drag; the old "resizing never snaps" line now snaps), `ResizeSnapCanvasTests` (resize snapping on the canvas with Ctrl mid-drag, snapping off, Shift's proportion), `ResizeSnapTests` (Swift's three, a turned layer swept, ties, nearer edges, free corners, a still edge keeping its guide, the dragged side alone, a press away from the handle, snapping off, a move), `TransformInspectorTests` (applied fields, Return, Escape, Ctrl+T's edit, another window in front, held keys flipping the box and the lock), `ScrubbableTransformTests` (scrubs apply on release, one step each). Judgments: Swift's `03d692c` drops a test the twin can keep (the box flipped while Ctrl is held is `heldKeysShowFlippedInTheBar`).
- The Smear's 1.4.2–1.4.3 fixes (13.16, part one: `7164dd4`, `ad9ad7c`, `504129d`, and `095da2f`'s commit half): Liquify is Swift's new GPU stroke on the CPU, as the twin has no Metal: `WarpStroke` keeps the layer as it found it (`m_original`, a copy made in the constructor) and a source offset per pixel (`m_offsets`, two floats each, zero at first); each dab copies the offsets under it to `m_scratch`, reads them bilinearly from behind the brush's travel, less the travel times the weight, writes them back, and draws the pixel afresh from the untouched layer, bilinear, held to its edges, each byte rounded once: `warp_push` of `MetalWarp.swift`, float for float (bytes over 255, mixed, times 255). Swift allocates the two textures on the first push; the twin allocates them with the stroke, before any dab (nothing changes the copy between), so a failure is `ExportError(render)` where `beginWarp` catches it, where Swift's guard returns in silence. A fix beyond Swift: on a canvas one pixel wide or tall the shader's `size - 2` reads outside the image; the twin clamps the lower index at zero and the upper neighbour at the last pixel, which changes nothing at two pixels or more (its weight is zero there). Smudge is `ad9ad7c` in both of Swift's paths: dabs every 0.005 of the width (a pixel at least), each dab lays what it carries at weight × strength, and carries what it just left, nothing older. `BrushSettings.blurRadius` (5) is the Blur's own Radius: the sample's sigma follows the Radius (see part two for the merged formula). `BrushControls` shows Radius for the Blur mode alone, after Strength: a scrubbable label (a tenth a point, 0.5–50), a 100-point slider over 0.5–20 in hundredths (past 20 Qt rests it at its end, so Swift's `min(20, …)` is left out), and a 42-point `PickerField` with "px": a readable number applies on Return or leaving, clamped, a number that is not finite takes 5 (Swift's binding), other text goes back, arrows step one (Shift ten) from the session's value, clamped; it prints Swift's `fractionLength(0...1)`, never grouped. `BrushStroke::maxDiameter` is 2100, so `finishWarp`'s tip four wider than a 2000 brush is no longer refused; `finishWarp` appends a dab centre only every twentieth of the brush (the last always), as Swift's. Part two (`095da2f`'s Blur half, on 13.11's grid sampling, cc9bf95 merged into port-d): `BrushStroke::Clone` is 13.11's `(image, placed, inGrid)` plus `render`, a function that makes a part of `image` (Swift's `cloneRender`; Swift keeps it beside `clone`, the twin inside it, so one assignment sets both), and `clone` is private behind `clone()` and `setClone()`, which drops the pieces cut so far (Swift's two `didSet`s). `clonePixels(key, tile)` is Swift's `clonePiece`: the tile mapped into sample pixels through 13.11's chain (grid, `pixelToDocument` unless `inGrid`, then `placed` to the image's pixels, Swift's `scaleX` and `scaleY`), two pixels round, made whole outward (`toAlignedRect`, Swift's `integral`), held to the image; an empty part paints nothing on that tile (the fill is skipped, as Swift's `if let piece`); otherwise the piece is `render(part)` or a copy, cut once per tile key and kept in `m_clonePieces`, and the tile's sample is drawn from it through the same transform shifted by the piece's corner, so every path reads the pixels the whole image would give. A piece that cannot be allocated is `ExportError(render)`, thrown on the calling thread with `publish`'s other copies, where Swift's `cropping` returning nil paints nothing. `blurSample(stroke)` returns the sharp sample in the stroke's grid (13.11's `region`, `fit` and budget unchanged) with `render` blurring a part at `sigma × fit`, padded by the Gaussian's reach (`ceil(3σ)`) and cut back, clear past the sample for pixels (`QImage::copy` fills outside with zeros), its edges repeated for a mask (Swift's `clampedToExtent`), so a piece equals that part of the whole byte for byte (Swift allows one level). The Radius sigma is Swift's `min(min(50, max(0.5, blurRadius)) / perPixel, sidePixels / 2)`. Merge: port-c's direct `clone =` writes became `setClone` (`beginBrush`, `finishWarp`, `cloneSample`'s callers, the tests and `documentClone`), every `Clone` initialiser names `render` (GCC's `-Wmissing-field-initializers`), and port-c's Blur sample tests compare the sharp sample (`framed`) and its softening through `render` (`soft`), with each brush size's old sigma now set as the Radius. Equivalent mutants and untested paths for part two: a piece, a padded copy or a cut-back blur that cannot be allocated (`ExportError`) is untested, as no starvation binary reaches one copy here. Equivalent mutants: allocating the Liquify buffers for every mode (memory only); dropping the stroke's thinned `kept` update (every point is appended: time only); in `push`, `jx` as `min(int(s), w - 1)` without the floor (a source on the last column reads it with weight zero beyond) and the upper neighbour unclamped (its weight is zeLine truncated
- Held keys, field values and resize snapping in the Move tool (13.13: `bca8f13`, `03d692c`, `686d8c7`, `c459f88`): `UI/HeldModifiers` twins Swift's class, a `QObject` singleton (`shared()`) with one signal, `changed()`. An application event filter reads key presses and releases and left-button presses and releases, Swift's `flagsChanged`, `keyDown`, `leftMouseDown` and `leftMouseUp`; a modifier key's own event sets or clears its bit, since Qt's event may not count it yet. Ctrl, Shift, Alt and Meta count (Swift's Command, Shift, Option, Control). Typing counts as none: Swift's `NSText` first responder is a focus widget with `Qt::WA_InputMethodEnabled`, so a `QLineEdit` and the canvas holding open text alike. `applicationStateChanged` stands for the two activation notifications (inactive clears; active reads `queryKeyboardModifiers`), and a `QMenu`'s `Hide` for `NSMenu.didEndTracking`. `TransformInspector` shows Auto Select as `transformAutoSelect != Ctrl` and the lock as `locksTransformRatio != Shift`, and a click while held writes the other way, as Swift's bindings; it synchronizes on `HeldModifiers::changed` too. Tooltips carry Swift's new words, Ctrl for Command. `transformPressLayer` follows Swift's: `autoSelect = transformAutoSelect != Ctrl`; Ctrl picks the layer under the pointer only with Auto Select off or with Shift (Ctrl+Shift adds either way). `TransformEdit.fromFields` sits last; `beginTransform(persistent, fromFields)` sets it, where Swift writes `transformEdit?.fromFields` in place (the twin's edit is read-only from outside). The bar's `change` opens a non-persistent `fromFields` edit; `finish` commits it, one step, when a field's scrub ends (`NumericScrub`'s `onEnd`) or the field loses focus. A focus borrowed by a menu, a popup or another window in front (`ActiveWindowFocusReason`, new: AppKit keeps the first responder when the app goes to the back) finishes nothing and keeps the typing. Escape in a field throws a `fromFields` edit away before handing the canvas the keys. The Swift path assumed: AppKit sends the Cancel button's Escape key equivalent (`configuredNativeShortcut(.escape)`) before the field editor, the only way `686d8c7`'s "Escape still throws the change away" can hold, since the field's own `onExitCommand` would end the focus and so apply the value. That path would also cancel a Ctrl+T edit from a field (and Return apply it); the twin keeps 6.1's reading there, a Ctrl+T edit waiting for the canvas's keys, a known difference held from 6.1. Flip H, Flip V and Sampling open a `fromFields` edit with no finish of their own, as Swift's do: it applies with the next field's finish, a canvas drag or anything that commits. `beginTransformDrag` commits a `fromFields` edit first, after `transformPressLayer` (so it picks nothing, as Swift's `picks`), so the two stay separate steps. Qt moves the focus before a press arrives, where SwiftUI's focus changes after `mouseDown`: a field left for a mouse press (`MouseFocusReason`) finishes from the event loop (a zero `QTimer`), so a typed value then a press over another layer drags the active layer under Auto Select, as in Swift (review 2's finding; `MoveBarPressTests`). `snappedResizePoint` lives in `Document/Crop.cpp` with Swift's: the edges each axis moves snap on their own to `transformSnapTargets` (the file's `nearest`, the first of ties), the nearer alone when proportional, the pointer nudged by one pixel's measured step; an upright layer only; guides set, or cleared when snapping is off, the drag is no resize or the layer turned. `dragTransform` snaps a resize unless Ctrl is held, proportional as `locksTransformRatio != Shift`. Dead or equivalent: `beginDistort` keeps `fromFields` where Swift's rebuild drops it, but a `fromFields` edit never reaches it (the canvas commits it before any handle drag). `snappedResizePoint`'s `before` read from `update(result)` or `update(point)` is equivalent (unlocked axes are independent, and proportional leaves one snap). The edge's tie (`<=`, the low edge) is reachable (the right handle half a pixel from its anchor, a one-pixel box) and held by `aTieTakesTheLowEdge`; the dragged handle's carried place by a drag past the anchor (`aLongDragSnapsTheEdgeItCarries`); Alt's centre resize by `altResizesFromTheCentreAndSnaps`. `QRectF::normalized` was dropped as dead (a resize keeps sizes positive and flips instead). Untested paths: the menu `Hide` and the activation's `queryKeyboardModifiers` (offscreen holds no real keyboard state). Tests: `MoveBarPressTests` (a typed value then a real press on another layer drags the active layer, two steps; Ctrl with a folder active and Auto Select on drags the folder past its box), `MovePressFixtures.h` (the canvas fixture the three press files share), `TransformPressTests` (Swift's `commandFlipsAutoSelectWhileHeld` both ways and `commandShiftClickAddsALayerWithAutoSelectOn`, Ctrl outside the active layer, a field edit applied before a canvas drag; the old "resizing never snapLine truncated
- The Smear's 1.4.2–1.4.3 fixes (13.16, part one: `7164dd4`, `ad9ad7c`, `504129d`, and `095da2f`'s commit half): Liquify is Swift's new GPU stroke on the CPU, as the twin has no Metal: `WarpStroke` keeps the layer as it found it (`m_original`, a copy made in the constructor) and a source offset per pixel (`m_offsets`, two floats each, zero at first); each dab copies the offsets under it to `m_scratch`, reads them bilinearly from behind the brush's travel, less the travel times the weight, writes them back, and draws the pixel afresh from the untouched layer, bilinear, held to its edges, each byte rounded once: `warp_push` of `MetalWarp.swift`, float for float (bytes over 255, mixed, times 255). Swift allocates the two textures on the first push; the twin allocates them with the stroke, before any dab (nothing changes the copy between), so a failure is `ExportError(render)` where `beginWarp` catches it, where Swift's guard returns in silence; Smudge's carried colour, allocated at the first dab inside `beginWarp`, fails the same way, and a dab's scratch that finds no memory skips that dab with a warning on `compositor.rendering`, Swift's guard on its scratch texture (review 2: it ran outside any catch). The colour reads keep the shader's `size - 2` as they are: the offsets' read above needs two columns and rows of the dab's area (`ix`, `iy`), which a canvas a pixel wide or tall lacks, so no read leaves the image; the clamps first written here for such canvases were dead and are removed (review 2). Smudge is `ad9ad7c` in both of Swift's paths: dabs every 0.005 of the width (a pixel at least), each dab lays what it carries at weight × strength, and carries what it just left, nothing older. `BrushSettings.blurRadius` (5) is the Blur's own Radius: the sample's sigma follows the Radius (see part two for the merged formula). `BrushControls` shows Radius for the Blur mode alone, after Strength: a scrubbable label (a tenth a point, 0.5–50), a 100-point slider over 0.5–20 in hundredths (past 20 Qt rests it at its end, so Swift's `min(20, …)` is left out), and a 42-point `PickerField` with "px": a readable number applies on Return or leaving, clamped, a number that is not finite takes 5 (Swift's binding), other text goes back, arrows step one (Shift ten) from the session's value, clamped; it prints Swift's `fractionLength(0...1)`, never grouped. `BrushStroke::maxDiameter` is 2100, so `finishWarp`'s tip four wider than a 2000 brush is no longer refused; `finishWarp` appends a dab centre only every twentieth of the brush (the last always), as Swift's; the thinning is `WarpStroke::committedPoints`, so the test reads it directly (`aCommitKeepsATwentiethAndTheLastPoint`). Part two (`095da2f`'s Blur half, on 13.11's grid sampling, cc9bf95 merged into port-d): `BrushStroke::Clone` is 13.11's `(image, placed, inGrid)` plus `render`, a function that makes a part of `image` (Swift's `cloneRender`; Swift keeps it beside `clone`, the twin inside it, so one assignment sets both), and `clone` is private behind `clone()` and `setClone()`, which drops the pieces cut so far (Swift's two `didSet`s). `clonePixels(key, tile)` is Swift's `clonePiece`: the tile mapped into sample pixels through 13.11's chain (grid, `pixelToDocument` unless `inGrid`, then `placed` to the image's pixels, Swift's `scaleX` and `scaleY`), two pixels round, made whole outward (`toAlignedRect`, Swift's `integral`), held to the image; an empty part paints nothing on that tile (the fill is skipped, as Swift's `if let piece`); otherwise the piece is `render(part)` or a copy, cut once per tile key and kept in `m_clonePieces`, and the tile's sample is drawn from it through the same transform shifted by the piece's corner, so every path reads the pixels the whole image would give. A piece that cannot be allocated is `ExportError(render)`, thrown on the calling thread with `publish`'s other copies, where Swift's `cropping` returning nil paints nothing. `blurSample(stroke)` returns the sharp sample in the stroke's grid (13.11's `region`, `fit` and budget unchanged) with `render` blurring a part at `sigma × fit`, padded by the Gaussian's reach (`ceil(3σ)`) and cut back, clear past the sample for pixels (`QImage::copy` fills outside with zeros), its edges repeated for a mask (Swift's `clampedToExtent`), so a piece equals that part of the whole byte for byte (Swift allows one level). The Radius sigma is Swift's `min(min(50, max(0.5, blurRadius)) / perPixel, sidePixels / 2)`. Merge: port-c's direct `clone =` writes became `setClone` (`beginBrush`, `finishWarp`, `cloneSample`'s callers, the tests and `documentClone`), every `Clone` initialiser names `render` (GCC's `-Wmissing-field-initializers`), and port-c's Blur sample tests compare the sharp sample (`framed`) and its softening through `render` (`soft`), with each brush size's old sigma now set as the Radius. Equivalent mutants and untested paths for part two: a piece, a padded copy or a cut-back blur that cannoLine truncated
- Drops between projects: `ProjectWorkspace::draggedLayerSource` finds the tab whose document holds the dragged id (Swift reads the drag pasteboard; the twin reads the drag's `QMimeData`, which every drop target has), `canReceiveDrag(data, destination)` refuses only a layer's own tab, and `receiveProviders` copies several ids one after another, as Swift awaits each provider, so a two-row drop on the New button opens two tabs as Swift's does. `ContentView` takes such a drop over its whole area (`setWorkspace` hands it the workspace; `acceptsDrop` keeps Swift's guards: busy, the sheet, the importer, a rename; `levels` arrives with 9.x), shows the 3-point accent ring inside the canvas while targeted and hands the drop's document point on when it fell on the canvas. `ProjectTabButton` takes drops for its tab (accent fill and rim, "Add to <title>"), and `NewCanvasButton`, the toolbar's New canvas button with the action as its default, for a fresh tab ("Open in a new project tab"), both refusing an Alt drag, which duplicates in the panel; Swift's transient `NewTabDropSlot` in the strip has no twin, the New canvas button is `NewProjectDropTarget` already. Files and pictures arrived with 10.4.
- `CanvasThumbnail` draws a layer or a mask inside the canvas's box at `backingScale` 2 (the panel's pixmaps carry that ratio); a mask's ground is `LayerMask::background`, white or black by its edge's majority, as the canvas treats it (Swift's `edgeTone` mean went with 12.12b). `LayerIcons` draws the panel's SF Symbols as paths, in one palette colour, like `ToolIcons`. `BlendModePicker` is a `QComboBox` whose popup previews the highlighted mode through `previewBlendMode` for the layer it opened on (Qt calls `hidePopup` before `activated`, so the preview, the target and the highlight are cleared from the event loop, after a choice had its chance) and refuses a choice once another layer is active. `LayerAppearanceControls` is Swift's blend and opacity row: the slider's press and release are one opacity drag (the release is watched application-wide while the slider is down, so a popup opened mid-drag cannot keep the step open), the percent field applies once through its `FocusOut`, which Return and Escape cause (Swift's `releasesFocusOnCommit`), and steps with Up and Down (Swift's `isFinite` test and the steps' clamp are left out: `setLayerOpacity` refuses a value that is no finite number and clamps the rest), and another active layer makes the controls anew, as Swift's `.id` does.
- `ProjectWorkspaceView` is the `QMainWindow`: the front tab's `ContentView` as its central widget, made anew when another tab comes to the front, as SwiftUI's `.id` rebuilds it, and disabled while the workspace manages; the window holds the shown tab (`std::shared_ptr`) until the old editor is deleted, as Swift's views hold their session, so a replaced or closed tab's session never ends under its editor (`ProjectWorkspace::tab` is public for this); a `QToolBar` with the New canvas action, the `ProjectTabStrip` (which takes the toolbar's free width) and the four zoom actions, since SwiftUI's `.toolbar` modifier lives in `ContentView` but the toolbar belongs to the window. Its actions follow the front session's `changed()`, and on that signal the window syncs every tab's button as well, because a busy front tab dims the other tabs' buttons, which their own sessions' signals do not reach; the strip syncs its buttons on the workspace's signal, each button on its own session's. The window's title is the front tab's, with Qt's `[*]` placeholder, so `setWindowModified` can show the mark that `isDocumentEdited` shows; `setWindowFilePath` carries `representedURL`. The editor's own minimum size is cleared inside the window, which owns the 800 × 520 minimum for the whole, toolbar included. Closing the window ignores the event and asks the workspace (`closeWindow`), which confirms tab by tab and then closes the window again with the property `closeConfirmed` set, since the workspace may not include `UI/` headers; a confirmed close is accepted and the mark cleared, so a window shown again asks again. `ProjectTabStrip` is a plain `QWidget` whose buttons are kept for the tabs that stay, made for new tabs and deleted for tabs that went, and placed by hand from `projectTabOverflow` (13.14): every button at its own size hint, so no title is squeezed below Swift's 35 points, laid out again when the strip is resized, the workspace changes or any tab's session changes; it fills no background, so the toolbar shows through (a stylesheet would do the same but freezes the widgets' palette, so a theme switch would pass them by); the unsaved dot is a character before the title. Files named on the command line go to `ProjectWorkspace::receive`, as Finder's Open With reaches the delegate. Layer drops on tabs and the New canvas button are 4.7's; file and picture drops arrived with 10.4.
@@ -446,13 +446,13 @@ Reviews for this section ran on codex `gpt-6.1-sol` at `max` (agent `codex-sol`)
- [x] 13.12 Part two: masks as Photoshop's: the button reveals the selection, Alt-click shows a mask alone (`b3419ab`).
- 13.12 port (agent): the mask button reveals the selection, Alt-click hides it; Alt-click on a mask thumbnail shows the mask alone (`viewsMaskAlone`, `toggleMaskAlone`, `drawMaskAlone`, a white ring, `MaskAloneBadge`); `liveFolderMaskClip` moved to `EditorCanvas+Masks.cpp`. No review yet.
- [x] 13.13 Part three: Ctrl flips Auto Select both ways and Shift the aspect lock, live in the bar (`bca8f13`, `03d692c`); Move bar values apply without Apply as one step (`686d8c7`); resize handles snap (`c459f88`).
- 13.13 port (agent): held Ctrl flips Auto Select both ways and Shift the lock, shown in the bar (`HeldModifiers`); Ctrl+Shift adds either way; the bar's typed, stepped and scrubbed values open a `fromFields` edit applied as one step when the field is left or the scrub let go, Escape throwing it away, a canvas drag applying it first; resize handles snap (`snappedResizePoint`), Ctrl free, a turned layer not; tests in `TransformPressTests`, `TransformInspectorTests`, `ScrubbableTransformTests`, `ResizeSnapTests`, `ResizeSnapCanvasTests`. Survivors recorded: the group branch's flip, the edge tie,`before`'s read. No review yet.
- 13.13 port (agent): held Ctrl flips Auto Select both ways and Shift the lock, shown in the bar (`HeldModifiers`); Ctrl+Shift adds either way; the bar's typed, stepped and scrubbed values open a `fromFields` edit applied as one step when the field is left or the scrub let go, Escape throwing it away, a canvas drag applying it first; resize handles snap (`snappedResizePoint`), Ctrl free, a turned layer not; tests in `TransformPressTests`, `TransformInspectorTests`, `ScrubbableTransformTests`, `ResizeSnapTests`, `ResizeSnapCanvasTests`. Survivors recorded: `before`'s read. No review yet.
- [x] 13.14 Part four: tabs drag to reorder, the ones that don't fit gather in a menu (`1faf7a0`).
- 13.14 port (agent): tests in `ProjectTabLayoutTests` (Swift's six and the bounds), `ProjectTabDragTests` (drag, slide, stacking, landing, threshold, busy, lost release, a close mid-drag, the overflow pill and its menu), `ProjectWorkspaceTests` (`moveTab`) and `ProjectWorkspaceViewTests`. Survivor recorded: reporting `ended` after a click that never dragged (equivalent but after a lost release); `span`'s empty guard and `contentWidth`'s pill fallback removed as dead. No review yet.
- [x] 13.15 Part five: Layer › Ungroup Layers (Ctrl+Shift+G) and in a folder's context menu (`1318f1e`, `6c3b9a5`); Alt over a mask thumbnail shows the duplicate pointer with an eye (`6955a6f`).
- 13.15 port (agent): tests in `GroupSessionTests` (Swift's three and more), `LayerContextMenuTests`, `CompositorMenusTests`, `KeyboardShortcutsTests` and `LayerDragGestureTests` (the eye pointer). Survivor recorded: the context entry gated by `canEditLayers` (equivalent: the right-click makes the folder active); Swift's validation guard left out as dead. No review yet.
- [x] 13.16 Versions 1.4.2–1.4.3: Liquify keeps pixels sharp (`7164dd4`), Smudge without ghost copies (`ad9ad7c`), the Blur brush's own Radius (`504129d`), Blur, Smudge and Liquify on big canvases (`095da2f`).
- 13.16 port (agent): Liquify on per-pixel offsets from the untouched layer (MetalWarp's `warp_push` on the CPU), Smudge carrying only the last dab's pixels at the strength, dabs a pixel apart; the Blur's own Radius (`blurRadius`, the bar's row), its sigma Swift's `min(min(50, max(0.5, r)) / perPixel, sidePixels / 2)` in 13.11's grid; `blurSample` returns the sharp sample with `render`, blurring only the pieces the brush reaches, each tile's clone piece cut once; `maxDiameter` 2100 and the warp commit's thinned points; tests in `SmudgeLiquifyTests`, `WarpStrokeTests`, `LargeCanvasBrushTests` (Swift's `largestBrushCommits`, `blurPiecesMatchTheWhole`), `BlurBrushTests`, `BlurToolTests`, `BrushControlsTests`, `BrushTests`. Survivors recorded: buffer allocation for every mode, the thinning's `kept`, the sample's edge reads at zero weight. No review yet.
- 13.16 port (agent): Liquify on per-pixel offsets from the untouched layer (MetalWarp's `warp_push` on the CPU), Smudge carrying only the last dab's pixels at the strength, dabs a pixel apart; the Blur's own Radius (`blurRadius`, the bar's row), its sigma Swift's `min(min(50, max(0.5, r)) / perPixel, sidePixels / 2)` in 13.11's grid; `blurSample` returns the sharp sample with `render`, blurring only the pieces the brush reaches, each tile's clone piece cut once; `maxDiameter` 2100 and the warp commit's thinned points; tests in `SmudgeLiquifyTests`, `WarpStrokeTests`, `LargeCanvasBrushTests` (Swift's `largestBrushCommits`, `blurPiecesMatchTheWhole`), `BlurBrushTests`, `BlurToolTests`, `BrushControlsTests`, `BrushTests`. Survivors recorded: buffer allocation for every mode. No review yet.
- [x] 13.17 Version 1.4.4: quit works mid-gradient or with a dialog open (`1aad384`); Dither › Scanlines (CRT) on all cores (`9c99853`, `cd2f998`).
- 13.17 port (agent): `settlePendingEdits` applies a pending gradient and pixel move and cancels open dialogs before Quit asks, `confirmQuit` refuses while managing; Scanlines (CRT) with Glow, Dots and Wobble, the kernel cd2f998's with GCD swapped for `dither_bands` on PoolMap (forced difference); tests in `QuitPendingEditsTests` and `ScanlinesTests`. Survivors recorded: the glow pad and edge mode, the band split. No review yet.
- [x] 13.18 Version 1.4.5: Camera Raw curves as Photoshop's (`60d9117`): the smooth parametric curve and the per-channel point curves, Refine Saturation's new meaning (0 the RGB curve, −100 brightness alone, above 0 stronger colour) and its words; the graph: a press picks a point, divider or tonal region once and keeps it through the drag, a region drag lifts or lowers that region, dividers move in the bottom strip and stay ordered, point mode picks by distance, adds and drags a new point at once, keeps inner points ordered and moves the end points' outputs alone, the chosen point lit and the readout following it, a new channel or preset clearing the choice.
// Two and a half from the previous, kept as last.
QCOMPARE(kept.back(),QPointF(51,10));
}
QTEST_GUILESS_MAIN(WarpStrokeTests)
#include"WarpStrokeTests.moc"
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
ZacharyZhang-NY committed