The workflow has been running ./build_iso.sh, which has not existed for a long
time — the build moved to bin/omarchy-iso-make. Every scheduled run in the last
100 has failed.
Run the real build driver instead, with NO_BOOT_OFFER=1 so it skips the
interactive "Boot this ISO?" prompt at the end, and collect from ./release/
where the ISO actually lands. Drop the outer archlinux container: omarchy-iso-make
starts its own privileged container, so the job only needs Docker on the runner.
Add a disk cleanup step, since a ~6.5GB ISO plus a ~4.5GB offline mirror does not
fit in a stock runner's free space.
Taken from #67 by @karthikkalidas, which was opened against main. main is 143
commits behind and is no longer the default branch, and scheduled workflows only
run from the default branch, so merging it there would have fixed nothing.
Co-Authored-By: Karthik Kalidas <karthik.kalidas@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The username regex accepted names that already exist on the target, so
useradd failed inside arch_install_system — after the disk had been
partitioned and formatted, which is the worst point to discover it.
From #59 by @wolfgangw, applied to quattro; it was opened against main.
Co-Authored-By: Wolfgang Woehl <tito@online.de>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
archiso boots on whatever governor the kernel defaults to, which on most
laptops ramps conservatively. Package extraction and the UKI build are both
CPU-bound, so pin performance for the whole install and put it back afterwards.
Reduced from #87 by @davydotcom, which also disabled every non-POLL cpuidle
state. That half is left out deliberately: C1 wake latency is 1us on current
hardware, and disabling it leaves POLL as the only idle state, so idle cores
busy-spin instead of halting. Package extraction is single-threaded, so on an
8-core laptop that is 7 cores burning power for no work — on a thermally
limited machine that costs the working core its turbo headroom, which is a
plausible way to make the install slower. #87 measured the two tweaks together
with a page-cache prefetch and an updatedb deferral, so the C-state
contribution was never isolated.
Scoped to the whole install rather than just the pacstrap window, which #87
used: finalize_limine_boot runs mkinitcpio and compresses a UKI, and is the
most purely CPU-bound phase there is.
Restoring only matters when an install fails and the user keeps using the live
environment; a successful one reboots out of it.
Co-authored-by: David Estes <davydotcom@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
install_progress() mapped each phase to a start%, an end% and a hard-coded
"expected seconds", then interpolated on elapsed time. Those seconds were
calibrated on one machine, so the bar was only ever honest on that machine.
Measured against a real 69s install on an XPS 13, the table expected 145s: 95s
for a phase that took 58.6s, 10s for one that took 2.6s. On slow media it is
wrong the other way — the bar reaches each phase's ceiling in a fraction of the
real time and then sits there. Today's clamp turns that into a 386-second freeze
at 85% on a USB2 install.
Phases do not even scale together: package installation is bound by media read
and disk write, the UKI rebuild is CPU and compression bound. No single seconds
table can be right for both.
So stop predicting durations. Position is now max(floor, work), both
non-decreasing:
floor an asymptote over the phase's band, on time since this process first
saw the phase. tau is a shape constant, not a prediction — wrong by 3x
it changes the pace of a crawl, never the correctness.
work only for "Installing Arch + Omarchy", which is ~85% of the install.
libalpm creates one directory per package under
<target>/var/lib/pacman/local, so counting them counts finished work.
The denominator is resolved at ISO build time by pacman's own resolver
against the offline mirror, so there is no second package list to
drift. phases.py records expected and actual in the timing JSON on
every install, so drift shows up in acceptance runs.
There is deliberately no give-up predicate: two discontinuous curves selected by
a toggle, behind a monotonic clamp, is a freeze generator. If the signal never
appears — no denominator, wrong target, implausible count — the floor alone
still walks the band to its end.
Position moves to per-mille. That is load-bearing, not precision theatre: these
are asymptotes, and in whole percent an asymptote over a 2-point band has two
reachable values and stops moving within seconds.
Time now comes from /proc/uptime. The live ISO runs tzupdate and
systemd-timesyncd, and the old code read EPOCHSECONDS, so a clock step
mid-install jumped every band straight to its ceiling.
Also fixes drift the old table had accumulated: it still weighted five phases
that no longer exist and had no entry at all for "Preparing install target",
which fell through to a 1->99 sweep. Unknown names now derive an even band from
the index the orchestrator already publishes.
bin/omarchy-iso-installer fakes a pacman database so the preview exercises the
package path instead of the fallback; PREVIEW_PACKAGES tunes the count.
Verified by simulation against the real logic: a 69s NVMe install, a 6-minute
USB2 install with a 70s pre-extraction stall, an implausible denominator, an
unknown phase name, and a target that already holds packages. All monotonic, all
reach 100%. Not yet run on real hardware.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The install reads ~3GB out of the offline mirror, and pacman consumes it at
only ~33MB/s (3.14GB of packages across the 95s the package phase is calibrated
at), so on any medium slower than that the install is read-bound. The ISO medium
is idle for the minutes the wizard takes, and the target disk written to later
is a different device, so reading ahead costs nothing that is otherwise in use.
Warms largest-first under a MemAvailable/2 budget. Deliberately no dependency
resolution: asking pacman exactly which files the install will read would copy
the package-set knowledge in phases_impl.py — the early list, the runtime
target, the kernel from the wizard's JSON — into a shell script that would drift
silently. The install reads roughly 69% of the mirror, so warming blindly is
close enough for a cache hint.
The page cache this fills is clean and reclaimable, so the failure mode under
memory pressure is wasted bandwidth rather than OOM. The budget stops small
machines evicting what was just warmed. The job ends when that budget is spent
rather than when the wizard exits, because the partitioning and format window
afterwards is also free medium time.
OMARCHY_NO_PREFETCH=1 turns it off so a single ISO can measure both arms against
the Installing Arch + Omarchy entry in /var/log/omarchy-install-timing.json.
Not yet measured on real USB media, and expected to be worth nothing in the VM
harness, where the ISO is backed by the host's page cache.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The dashboard owns the visible UI: it captures the orchestrator's stdout into
the support log and strips CSI sequences on the way in, so the colouring was
never seen by anyone. gum charged a Go process start per line for it, on every
phase and every package group. Plain writes keep the same indented shape.
Flushing stays: pacstrap and arch-chroot inherit this fd, so buffering would
reorder our lines against theirs in the log.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Squashfs decompresses on the page-fault path through a single stream
(CONFIG_SQUASHFS_DECOMP_SINGLE), where xz manages roughly a tenth of zstd's
throughput, and the live root is read cold on every boot: kernel, plymouth,
systemd, python, archinstall, gum. The offline mirror is already stored
uncompressed, so this only covers the part that still gets decompressed.
Costs well under a percent of ISO size. Dropping the x86 BCJ filter also
removes one of the blockers listed in plans/aarch64-support.md.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The existing hook mask only covers pacstrap. pacman.conf(5) HookDir is
absolute, so it never applied to the pacman runs inside arch-chroot, and during
omarchy-setup-system the target's own hooks are live. limine-entry-tool's
90-mkinitcpio-install.hook triggers on usr/lib/firmware/*, usr/src/*/dkms.conf
and usr/lib/modules/*/pkgbase, and collect_pkgbase_files sets rebuild_all for
any trigger outside usr/lib/modules — so it rebuilds the initramfs and UKI for
every installed kernel. The hardware scripts hit that routinely: sof-firmware
on Intel audio, nvidia-open-dkms, linux-ptl on Panther Lake, linux-t2 on Macs.
Every one of those builds is discarded. finalize_limine_boot runs limine-update
immediately after, which pipes "rebuild" into the same script and rebuilds
unconditionally. They are stale as well as redundant: hardware/nvidia.sh writes
its mkinitcpio drop-in after installing the driver.
Mask that one hook inside the target for the duration of the phase. The
kernel-removal hooks stay live — they only prune Limine entries, which is what
ptl-kernel.sh's "pacman -Rdd linux" needs.
A mask that survived would be invisible until a later kernel update shipped a
UKI-less boot, so it is restored in a finally, again in main()'s finally, and
validate_boot repairs and then insists the real hook is back before reboot.
limine-mkinitcpio-hook is a hard dependency of the Omarchy runtime package, so
that file is always on disk before the mask goes up.
Worth several seconds per avoided build on real hardware. It is invisible in
the VM harness, which installs no hardware packages, so measure it on an Intel
laptop rather than in CI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
omarchy-settings now ships the tuning as a vendor drop-in that outranks the
main config file, so setup_swap's /etc copy decides nothing and is removed only
to keep /etc free for the local admin.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LjeyQZsNBxqyYy9z8KaKm7
Hardware packages like omarchy-hw-intel-ptl swap the kernel mid-install,
so the UKI lands under a name the configurator never asked for and boot
validation halted a perfectly good install. Read the kernels back off
/usr/lib/modules/*/pkgbase instead of trusting the requested name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
archinstall's FilesystemHandler.perform_filesystem_operations defaults to
show_countdown=True, which runs a ~4.5s "5...4...3...2...1" warning
(_final_warning) before wiping the disk. That prompt is meant for
archinstall's interactive TUI; in our orchestrated/dashboard install it
renders nowhere and just sleeps silently on every full-disk install.
Pass show_countdown=False, guarded by an introspection check so it stays
safe on newer archinstall releases that dropped both the countdown and the
parameter. Generalize _method_accepts_users into _method_accepts for the
check.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
archinstall's setup_swap writes /etc/systemd/zram-generator.conf directly
into the target, but omarchy-settings now ships that file as a packaged
config. pacstrap then aborts the transaction on a file conflict
("zram-generator.conf exists in filesystem"), failing the install.
Delete archinstall's copy after setup_swap so omarchy-settings' packaged
config lands cleanly. We still keep the zram-generator package and service
that setup_swap installs.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fresh installs on real hardware failed pacstrap with "keyring is not
writable" and "required key missing from keyring". The offline repo's
SigLevel = Optional TrustAll was not the bypass it appeared to be:
Optional verifies whenever a .sig file exists — and every package in the
offline mirror ships one — while pacstrap's pacman -r relocates the
install root but not GpgDir, so verification runs against the LIVE
keyring. That silently made every install depend on archiso's boot-time
pacman-init.service having finished: fast in QEMU, minutes-or-never on
real hardware, where pacstrap then raced it and lost.
The mirror ships inside the ISO, whose integrity is already covered by
the airootfs sha512 and the ISO signature, so pacman-level signature
verification adds nothing. Set SigLevel = Never so installs never touch
the live keyring. The target still gets its own keyring via pacstrap -K
plus the archlinux-keyring/omarchy-keyring package hooks.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
QEMU's default COM1 is advertised to the guest via ACPI SPCR, the boot
stub appends console=uart,io,0x3f8 to the kernel cmdline, and Plymouth
deliberately forces its plain-text details mode whenever a serial console
is active. That made every omarchy-iso-boot test show an unthemed LUKS
prompt that real hardware (no serial port) never shows. Remove the serial
device so manual QEMU tests match real-hardware appearance.
omarchy-iso-test keeps its -serial file: logging on purpose — the harness
reads the console log and types blindly, so details mode is harmless there.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
prepare_live waited on archiso's pacman-init.service, stalling real-hardware
installs at 5% for minutes: the boot-time keyring init (gpg key generation
plus populating every keyring) is slow when reading from USB, and as a
Type=oneshot unit with no start timeout it can block systemctl start
indefinitely.
Nothing in the install consults the live keyring. The offline repo is
SigLevel = Optional TrustAll and archinstall bootstraps with pacstrap -K,
which gives the target its own independently initialized keyring. Drop the
wait and let pacman-init finish in the background for anyone using the live
environment interactively.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Kernel 7.1 unpacks the initramfs asynchronously, which races /init: the
early /proc, /sys, /dev, and /run mounts fail with EPERM while unpacking
settles. In the live environment that kills Plymouth and leaves early
archiso mounts to luck. Force synchronous unpacking on every boot entry,
matching the fix shipped for installed systems in omarchy-defaults.conf.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Offer the same gum chooser over release/*.iso when no ISO is passed,
and fail plainly when there is no existing ISO to test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Installs an ISO into a headless QEMU VM by driving the real interactive
install flow: each screen is read via QMP screendumps + OCR and answered
with virtual keystrokes, so the configurator wizard, install dashboard,
reboot prompt, and SDDM login are exercised exactly as a user would.
SSH access is bootstrapped by logging into a console TTY, the installed
disk is snapshotted for fast reruns, and a throwaway overlay then runs
the omarchy repo's in-guest acceptance suite over SSH.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Full-disk installs flaked with "Partition(s) 1, 2 on /dev/vda have been
written, but we have been unable to inform the kernel of the change":
archinstall's disk wipe and parted's own partition registrations fire
udev probes, and when one is still holding the disk mid-commit, the
BLKPG sync fails and the install halts. The table is written correctly
when this happens — only the kernel's view is stale — so settle udev
before partitioning and redo the filesystem operations (wipe, partition,
format) when parted throws exactly this error. Recoveries are logged so
they show up in the support log.
Reproduced headlessly by booting the ISO on a serial console and driving
the real installer: stock failed 1 in 5 full-disk cycles at this exact
phase, with an audit watch confirming nothing else writes the disk. With
the fix, 13 of 13 cycles got cleanly through partitioning.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Remeasure the terminal at every screen redraw instead of once at boot:
the framebuffer can settle after the configurator starts (VM windows
especially), which left stale padding for the whole flow. Pad the
confirm-screen warnings with say so every line shares the same left
edge. Boot the test VM with SDL instead of GTK, whose GL display path
crops the guest framebuffer on HiDPI Wayland desktops.
Verified in a live VM by driving the whole flow over QMP and reading
each screen back from /dev/vcs1: all screens center on the real console
width.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Three echo-through-awk substitutions to split one line into three
variables is what read was made for.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The free-space and full-disk paths each carried verbatim copies of the
T2 Mac kernel detection, the credentials JSON heredoc, the identity/
encryption answer files, the dry-run print-and-cleanup block, and the
udev settle loops. Pull those into detect_kernel, write_user_files,
print_dry_run_files, and wait_for_device, which also removes a subtle
rm vs rm -f drift between the two dry-run cleanups.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
We decided Omarchy always creates its own dedicated ESP and never adopts
a Windows one, so shared_esp was declared empty and never assigned —
every conditional on it was guaranteed to take the dedicated-ESP branch.
Collapse the whole dual-path structure into straight-line code and keep
detect_windows_esp only for the "leaving it untouched" message.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
build-iso.sh bakes tzupdate into the live environment, so the runtime
pacman fallback was dead there — and in a dry run on a dev machine it
would install a package as a side effect. tzupdate -p already fails
gracefully into the manual timezone filter when the tool is missing.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Drop the dead LOGO_PATH override, the redundant package-targets sourcing,
the unused TERM_HEIGHT and OMARCHY_NVIM_PACKAGE, the non-gum exports, and
the logo fallback branches. Trust that logo.txt is where OMARCHY_PATH says.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The install dashboard shelled out to a full Python interpreter to read
four keys from the installer state JSON — including inside the render
loop, twice a second. jq is already on the ISO and does the same job
with plain bash arithmetic for the phase-weight interpolation.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
