Merge pull request #62 from spencerbull/linux-ptl

Consolidate linux-ptl-audio into linux-ptl for Panther Lake Backports
This commit is contained in:
David Heinemeier Hansson
2026-03-25 13:06:26 +01:00
committed by GitHub
15 changed files with 208 additions and 5 deletions
@@ -0,0 +1,201 @@
From ddaa85feeb15783cf8b4a1a673303f8affb9b155 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Thu, 19 Mar 2026 11:09:24 +0200
Subject: wifi: iwlwifi: mld: correctly set wifi generation data
In each MAC context, the firmware expects the wifi generation
data, i.e. whether or not HE/EHT (and in the future UHR) is
enabled on that MAC.
However, this is currently handled wrong in two ways:
- EHT is only enabled when the interface is also an MLD, but
we currently allow (despite the spec) connecting with EHT
but without MLO.
- when HE or EHT are used by TDLS peers, the firmware needs
to have them enabled regardless of the AP
Fix this by iterating setting up the data depending on the
interface type:
- for AP, just set it according to the BSS configuration
- for monitor, set it according to HW capabilities
- otherwise, particularly for client, iterate all stations
and then their links on the interface in question and set
according to their capabilities, this handles the AP and
TDLS peers. Re-calculate this whenever a TDLS station is
marked associated or removed so that it's kept updated,
for the AP it's already updated on assoc/disassoc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260319110722.404713b22177.Ic972b5e557d011a5438f8f97c1e793cc829e2ea9@changeid
---
drivers/net/wireless/intel/iwlwifi/mld/iface.c | 101 +++++++++++++++-------
drivers/net/wireless/intel/iwlwifi/mld/mac80211.c | 19 ++++
2 files changed, 88 insertions(+), 32 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/mld/iface.c b/drivers/net/wireless/intel/iwlwifi/mld/iface.c
index 29df747c893801..9215fc7e2eca70 100644
--- a/drivers/net/wireless/intel/iwlwifi/mld/iface.c
+++ b/drivers/net/wireless/intel/iwlwifi/mld/iface.c
@@ -111,14 +111,75 @@ static bool iwl_mld_is_nic_ack_enabled(struct iwl_mld *mld,
IEEE80211_HE_MAC_CAP2_ACK_EN);
}
-static void iwl_mld_set_he_support(struct iwl_mld *mld,
- struct ieee80211_vif *vif,
- struct iwl_mac_config_cmd *cmd)
+struct iwl_mld_mac_wifi_gen_sta_iter_data {
+ struct ieee80211_vif *vif;
+ struct iwl_mac_wifi_gen_support *support;
+};
+
+static void iwl_mld_mac_wifi_gen_sta_iter(void *_data,
+ struct ieee80211_sta *sta)
{
- if (vif->type == NL80211_IFTYPE_AP)
- cmd->wifi_gen.he_ap_support = 1;
- else
- cmd->wifi_gen.he_support = 1;
+ struct iwl_mld_sta *mld_sta = iwl_mld_sta_from_mac80211(sta);
+ struct iwl_mld_mac_wifi_gen_sta_iter_data *data = _data;
+ struct ieee80211_link_sta *link_sta;
+ unsigned int link_id;
+
+ if (mld_sta->vif != data->vif)
+ return;
+
+ for_each_sta_active_link(data->vif, sta, link_sta, link_id) {
+ if (link_sta->he_cap.has_he)
+ data->support->he_support = 1;
+ if (link_sta->eht_cap.has_eht)
+ data->support->eht_support = 1;
+ }
+}
+
+static void iwl_mld_set_wifi_gen(struct iwl_mld *mld,
+ struct ieee80211_vif *vif,
+ struct iwl_mac_wifi_gen_support *support)
+{
+ struct iwl_mld_mac_wifi_gen_sta_iter_data sta_iter_data = {
+ .vif = vif,
+ .support = support,
+ };
+ struct ieee80211_bss_conf *link_conf;
+ unsigned int link_id;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_MONITOR:
+ /* for sniffer, set to HW capabilities */
+ support->he_support = 1;
+ support->eht_support = mld->trans->cfg->eht_supported;
+ break;
+ case NL80211_IFTYPE_AP:
+ /* for AP set according to the link configs */
+ for_each_vif_active_link(vif, link_conf, link_id) {
+ support->he_ap_support |= link_conf->he_support;
+ support->eht_support |= link_conf->eht_support;
+ }
+ break;
+ default:
+ /*
+ * If we have MLO enabled, then the firmware needs to enable
+ * address translation for the station(s) we add. That depends
+ * on having EHT enabled in firmware, which in turn depends on
+ * mac80211 in the iteration below.
+ * However, mac80211 doesn't enable capabilities on the AP STA
+ * until it has parsed the association response successfully,
+ * so set EHT (and HE as a pre-requisite for EHT) when the vif
+ * is an MLD.
+ */
+ if (ieee80211_vif_is_mld(vif)) {
+ support->he_support = 1;
+ support->eht_support = 1;
+ }
+
+ ieee80211_iterate_stations_mtx(mld->hw,
+ iwl_mld_mac_wifi_gen_sta_iter,
+ &sta_iter_data);
+ break;
+ }
}
/* fill the common part for all interface types */
@@ -128,8 +189,6 @@ static void iwl_mld_mac_cmd_fill_common(struct iwl_mld *mld,
u32 action)
{
struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(vif);
- struct ieee80211_bss_conf *link_conf;
- unsigned int link_id;
lockdep_assert_wiphy(mld->wiphy);
@@ -147,29 +206,7 @@ static void iwl_mld_mac_cmd_fill_common(struct iwl_mld *mld,
cmd->nic_not_ack_enabled =
cpu_to_le32(!iwl_mld_is_nic_ack_enabled(mld, vif));
- /* If we have MLO enabled, then the firmware needs to enable
- * address translation for the station(s) we add. That depends
- * on having EHT enabled in firmware, which in turn depends on
- * mac80211 in the code below.
- * However, mac80211 doesn't enable HE/EHT until it has parsed
- * the association response successfully, so just skip all that
- * and enable both when we have MLO.
- */
- if (ieee80211_vif_is_mld(vif)) {
- iwl_mld_set_he_support(mld, vif, cmd);
- cmd->wifi_gen.eht_support = 1;
- return;
- }
-
- for_each_vif_active_link(vif, link_conf, link_id) {
- if (!link_conf->he_support)
- continue;
-
- iwl_mld_set_he_support(mld, vif, cmd);
-
- /* EHT, if supported, was already set above */
- break;
- }
+ iwl_mld_set_wifi_gen(mld, vif, &cmd->wifi_gen);
}
static void iwl_mld_fill_mac_cmd_sta(struct iwl_mld *mld,
diff --git a/drivers/net/wireless/intel/iwlwifi/mld/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mld/mac80211.c
index 0c53d6bd96514c..71a9a72c9ac0ed 100644
--- a/drivers/net/wireless/intel/iwlwifi/mld/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mld/mac80211.c
@@ -1761,6 +1761,16 @@ static int iwl_mld_move_sta_state_up(struct iwl_mld *mld,
if (vif->type == NL80211_IFTYPE_STATION)
iwl_mld_link_set_2mhz_block(mld, vif, sta);
+
+ if (sta->tdls) {
+ /*
+ * update MAC since wifi generation flags may change,
+ * we also update MAC on association to the AP via the
+ * vif assoc change
+ */
+ iwl_mld_mac_fw_action(mld, vif, FW_CTXT_ACTION_MODIFY);
+ }
+
/* Now the link_sta's capabilities are set, update the FW */
iwl_mld_config_tlc(mld, vif, sta);
@@ -1873,6 +1883,15 @@ static int iwl_mld_move_sta_state_down(struct iwl_mld *mld,
/* just removed last TDLS STA, so enable PM */
iwl_mld_update_mac_power(mld, vif, false);
}
+
+ if (sta->tdls) {
+ /*
+ * update MAC since wifi generation flags may change,
+ * we also update MAC on disassociation to the AP via
+ * the vif assoc change
+ */
+ iwl_mld_mac_fw_action(mld, vif, FW_CTXT_ACTION_MODIFY);
+ }
} else {
return -EINVAL;
}
--
cgit 1.2.3-korg
@@ -1,10 +1,10 @@
# Maintainer: Intel PTL Audio Enablement
# Maintainer: Gaggory Tsai <gaggery.tsai@intel.com> Spencer Bull <Spencer.Bull@Dell.com>
# Based on Arch Linux linux package by Jan Alexander Steffens (heftig)
pkgbase=linux-ptl-audio
pkgbase=linux-ptl
pkgver=6.19.9.arch1
pkgrel=1
pkgdesc='Linux with Panther Lake SDCA audio backports'
pkgdesc='Linux with Panther Lake hardware backports (SDCA audio, WiFi 7)'
url='https://github.com/archlinux/linux'
arch=(
x86_64
@@ -42,6 +42,7 @@ source=(
0013-ASoC-SDCA-Add-regmap-defaults-for-specification-defi.patch
0014-ASoC-SDCA-Limit-values-user-can-write-to-Selected-Mo.patch
0017-ASoC-SDCA-Fix-NULL-pointer-dereference-in-sdca_jack_.patch
0018-wifi-iwlwifi-mld-correctly-set-wifi-generation-data.patch
)
source_x86_64=(config.x86_64)
validpgpkeys=(
@@ -54,7 +55,7 @@ b2sums=('6be41037c5b18e9a8d1c58fdd613e37bb5c841b7f43baf95516f3dda461adc6eb20da03
'edc6d11f32f16a53e520b53b52be690d192c0a64153419cbba65e4a2c0f426ce76ab2c10dbddd7f82f2c407c071039b05018796cf2b8ba501d46e3a259146ced'
'SKIP'
'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP'
'SKIP' 'SKIP' 'SKIP' 'SKIP')
'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP')
b2sums_x86_64=('cab93bd983d92e2fc6047bfaa3fc3b52fbd23272aef4aaa10500ac0ac26847c1bbdfdb13a6f64ad7689166109b99a078580bf43a02aaf9f2be0ae8885a87ffc8')
# https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc
@@ -63,7 +64,7 @@ sha256sums=('c16068a3af12e3943dee3b1eef57ca70229c069128bfa1184fb3f48b219d55bf'
'dacb94dc3be57fc442995a3d3d1519775d3f6877a4e2fec437223d95e318f04b'
'SKIP'
'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP'
'SKIP' 'SKIP' 'SKIP' 'SKIP')
'SKIP' 'SKIP' 'SKIP' 'SKIP' 'SKIP')
export KBUILD_BUILD_HOST=archlinux
export KBUILD_BUILD_USER=$pkgbase
@@ -107,6 +108,7 @@ _package() {
coreutils
initramfs
kmod
sof-firmware
)
optdepends=(
"$pkgbase-headers: headers and scripts for building modules"