Disable PSR2 selective fetch and Panel Replay on DX13260 Panther Lake through a Limine drop-in. Apply it during hardware setup and an update migration, rebuild once per machine, and request reboot until both parameters are booted. Reject diagnosed Limine build errors even when the wrapper returns success so interrupted repairs stay pending.
Co-Authored-By: GPT-6.1-Sol XHigh <noreply@openai.com>
Quote the marker path as a Bash literal before escaping it for sed, so TMPDIR metacharacters survive both fixture copying and script evaluation. Rerun the firmware regression under a special-character TMPDIR while preserving the original PATH for real pacman resolution.
Co-Authored-By: GPT-6.1-Sol <noreply@openai.com>
Co-Authored-By: Greptile <165735046+greptile-apps[bot]@users.noreply.github.com>
A caller-controlled marker path would let the privileged install command replace an unrelated file. Keep the production path fixed and redirect that literal only in isolated test copies. Cover hostile environment overrides without touching system files.
Co-Authored-By: GPT-6.1-Sol <noreply@openai.com>
Co-Authored-By: Greptile <165735046+greptile-apps[bot]@users.noreply.github.com>
Explicitly select the Omarchy Cirrus firmware when the installed package predates the 1028:0e54 aliases. Apply it during hardware setup and through an update migration, and request a reboot for each user until the firmware can load. Require the same minimum version in the offline package list so newer Arch snapshots keep their genuine firmware.
Co-Authored-By: GPT-6.1-Sol <noreply@openai.com>
* Let the agents in the panel be put in any order
Drag an agent by its mark to move its section; the header it will land
on lights up, and the move happens on release. Each agent's header is
now a keyboard stop with its own highlight, and Ctrl+Up/Down moves the
agent the cursor is in. The order is kept in agents/order.json beside
the usage records. The key catcher turns Ctrl+Up/Down into a reorder
only for panels that opt in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Light only an agent's mark when the cursor or a drag is on it
The mark is the handle the agent moves by, so the keyboard cursor and
the drop spot while dragging box it alone rather than the header line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep a lit agent mark's box from being clipped at the panel's edge
The box overhangs the content's left edge, which the scrolling area
clipped. The scrolling area now reaches a little into the panel's
padding with the content shifted back, so nothing moves and the box
draws whole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reuse a Grok session scan only on the day it was made
A limits-only refresh just after midnight reused a scan from the evening
before, which counted yesterday's sessions as today's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep Ctrl+Up/Down from moving an agent when the cursor is outside one
The hero's buttons and the starter tiles carry indices too, and the
lookup read them as accounts, so with several accounts Ctrl+Up/Down on
one of them moved an unrelated agent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a failed mise update even after the Grok upkeep runs
The Grok block ran after `mise up` and its last command set the script's
status, so a failed tool update could read as a success to callers that
warn about it. The update's own status is now the script's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Unpack a Grok update into ~/.grok whatever GROK_HOME says
The upkeep replaces ~/.grok's link, but the npm launcher unpacks into
GROK_HOME when it's set, so with a custom home the link never came back
at the new release and the old one was restored.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hold off reordering agents while an account name is being edited
Ctrl+Up/Down reached the key catcher during an inline rename, and moving
the agent rebuilt its section, dropping the unfinished name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Install Grok through mise's first-party package
The npm launcher keeps an old ~/.grok/bin binary because mise skips its
postinstall. Use mise's grok tool, and drop the npm tool so its shim
does not stay ahead of the stub.
* Drop the npm Grok workarounds now that mise installs Grok itself
With Grok installed through mise's first-party package, the CLI is the
binary mise manages, so the update upkeep that repointed ~/.grok/bin and
the shared bin directory for added Grok accounts have nothing left to do.
omarchy-update-mise is back to running mise up and nothing else, and
adding a first Grok account installs the same package.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Count Grok's tokens and prompts from its usage ledger
Each Grok session keeps a usage.json, the ledger `grok usage` prints, with
every finished turn's end time and tokens by model. The collector now
reads it for tokens today, by day for the last week, and by model, with
cached input kept apart, and counts today's prompts by the turns that
ended today. Found in #12352's research.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Count cache writes in Grok's daily token totals
Grok's totalTokens leaves cache writes out while the per-model buckets
count them, so a turn with cache writes added less to its day than to
its model. The day's total is now the sum of those same buckets.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Remove the npm launcher's old Grok binaries when moving to mise's Grok
Omarchy's npm wrapper ran the binary the launcher unpacked into
~/.grok/bin, where x.ai's installer also puts a copy with a PATH entry
ahead of mise. Once the wrapper is replaced, a binary left there would
keep shadowing the mise tool, so the migration removes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Jesse Miller <jmiller@jmiller.com>
* Let Grok updates through mise take effect
Grok's npm launcher runs ~/.grok/bin/grok whenever it exists, and the
install script that repoints it at a new release doesn't run under mise,
so every machine kept running the release it first unpacked. Updating
mise tools now drops a link to an older release and the old binary, and
lets the launcher unpack the installed one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep several Grok accounts, the way Claude and Codex do
Grok honors GROK_HOME, so an added Grok account gets its own home holding
only its login and settings cache, with the CLI binary, sessions, skills,
plugins, memory, and config linked back to ~/.grok. The account commands,
the add flow (a second account signs in through a private window), the
launcher, and a grok shell function all take it like the others, and its
identity and plan come from the files Grok writes at login.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Show Grok's plan and credits in the agents panel
A grok collector reads each account's plan from the settings Grok caches
and its credits from the endpoint behind Grok's own /usage view, so Grok
gets a section, per-account limits, and autoswitch like Claude and Codex.
A signed-in agent with a plan now shows before its first numbers, so a
lapsed sign-in has somewhere to say so. Grok's mark joins the assets, and
with every agent able to take another account the add screen no longer
needs to dim one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Document Grok accounts and limits alongside Claude and Codex
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Read Grok's credits the way xAI actually answers
The answer nests under config, names a weekly period with its end, and
as protobuf JSON leaves the usage percentage out while it's zero. The
collector now reads that shape, so a fresh week shows as 0% until it
resets rather than as nothing known.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Count Grok's prompts and sessions from its session summaries
Grok keeps a summary beside each session with when it was last active
and how many prompts it had, so its section and the hero's summary get
today's prompts and sessions and its active days. It records no token
counts there, so none are claimed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Give each Grok limits cache write its own temporary file
Two overlapping collector runs wrote the same cache through one .tmp
path, so one rename could leave the other's failing and its record not
updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Read a single Grok account from GROK_HOME when it's set
The launcher and the CLI honor GROK_HOME, but the collector always read
~/.grok, so a Grok signed in only in a custom home showed nothing. With
one account, the collector now reads the home the CLI would; with
several registered, the primary stays ~/.grok.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop guesses the real Grok credits answer made unnecessary
The collector carried fallbacks for fields and shapes guessed from the
binary before xAI's actual answer was seen, a numeric timestamp branch
nothing writes, the panel's default for prompt stats, and guards that an
empty sign-in already covers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the working Grok release until its update is in place
The update dropped the link and older binaries before the new release was
unpacked and ignored a failed unpack, which could leave every Grok
account without a CLI. The old release now stays until the new one is
linked, and its link comes back if it never is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Count only Grok sessions for today, not prompts
A session's summary holds all its prompts and only when it was last
active, so a resumed session put its whole history on today. Today now
counts the sessions active in it; prompts stay an all-time total.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reuse the Grok session scan on a limits-only refresh
Opening the panel and near-limit checks only need fresh limits, so they
reuse a scan up to 15 minutes old, as the Codex collector does; --force
still rescans.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Plan multiple Claude and Codex accounts with manual or automatic switching
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep several Claude and Codex accounts and start new sessions as the active one
Each added account gets its own home holding only its login, with history,
settings and skills linked back to ~/.claude or ~/.codex so --continue works
across a switch. Accounts are added through the CLI's own login, and cx, cy,
plain claude/codex and omarchy-agent all start as the active account unless
CLAUDE_CONFIG_DIR or CODEX_HOME is already set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report limits for every Claude and Codex account in the usage records
Each registered account is probed with its own sign-in and cached on its own,
and a parked account whose sign-in lapsed keeps its last-known numbers marked
stale. The record's top-level limits keep describing the active account.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Switch accounts automatically near a limit, or notify with a one-click switch
After each usage update, an active account at or over its provider's
threshold (95% by default) moves new sessions to the account with the most
headroom in auto mode, or offers that switch as a notification in manual mode.
It never flaps back to an account that just reset, and says once when every
account is over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Show every subscription account's limits in the agents panel
With several Claude or Codex accounts, the limits become one card per account
with the active one badged. Pick a card with its number and press Enter (or
click Use) to move new sessions to it, press a to add an account, and m to
toggle automatic switching. Limits refresh every minute while an active
account is above 80%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add Setup > Agent Accounts to list, switch and add Claude and Codex accounts
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Document switching between several Claude and Codex subscriptions
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Count a rested parked account as available, and pin Main to its own home
A parked Claude account whose windows all reset now reads as 0% instead of
unknown, so switching can pick it. Main's Codex limits come from ~/.codex even
when CODEX_HOME is set, and duplicate logins are checked against who each home
is signed in as now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Key limits caches by subscription and report when an account truly frees up
An added account's limits cache follows its account id, so a new account
reusing a removed one's label never inherits its allowance. The all-accounts
notice now names when an account's blocking windows have all reset, not the
earliest reset of any window.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep account ids clear of routing keywords and refresh the panel after removal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Share Codex plugins and hooks across accounts, and key Claude caches by current sign-in
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the key hint from the Add account button
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sign new agent accounts in through a private browser window
The main browser is almost certainly signed in to the account you already
have, and the login would silently reuse it. Both CLIs open their login page
through $BROWSER, so it now points at omarchy-launch-browser --private.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let agent account commands default to your default agent's provider
With Claude or Codex as the default agent, the provider can be left out:
omarchy agent account use work, and primary names the primary account.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the primary alias, which shadowed an account named Primary
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Replace the auto switch button with a small Notify / Autoswitch toggle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add accounts from a small + beside the switch toggle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fix the punctuation of the switch toggle's README line
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the border around the add account +
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename Claude and Codex accounts without moving their homes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Lay out agent accounts on accent rails instead of boxed cards
The active account gets an accent rail and the others a quiet one, each
window is a single compact line, and the switch toggle, add, and Use are text.
Clicking an account's name renames it in place. A window without a reset time
no longer leaves an empty line, and last-known numbers are only red when the
sign-in needs attention.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Read Codex limits without waiting on account/read
Codex 0.158's app-server can leave account/read unanswered, and asking it
first lost the limits whenever it did, leaving the agents panel showing
"Codex limits unavailable". The limits name the plan themselves, so they're
asked first and account/read is only a short fallback when they don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Switch agent providers from their marks in the panel header
The row of provider buttons gives way to a small mark per provider in the
hero's corner, the selected one at full strength, with the add account +
beside them in place of the + by the switch toggle and the full-width Add
account button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the agents panel's scrollbar off its contents
The panel's content narrows to leave the scrollbar its own strip whenever it
scrolls, and the add account + leads the provider marks instead of sitting at
the very edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add Claude, Codex, or Grok subscriptions from one Add Account menu
The first account for a provider installs its CLI if needed and signs in to
the CLI's own home through the normal browser; only additional accounts get a
home of their own and a private window. Grok signs in its first account.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reveal Autoswitch beside Use instead of a Notify / Autoswitch row
The panel's + now opens the Add Account menu for any provider.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Split agent accounts with plain separators instead of rails
ACTIVE already marks the account new sessions use.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Only call Claude limits stale once they're old, and poll near a limit less
Anthropic rate-limits its usage endpoint, and polling two accounts every
minute near a limit got every re-check refused, so both accounts read
"Last known" with numbers a minute old. A refused check of numbers under
15 minutes old now counts as current, older ones say how old they are,
and near-limit polling is every three minutes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Show every agent's limits on one page under an Agents hero
The panel stops switching between one provider at a time and lists every
agent and account with its limits, dropping the tokens-by-day and by-model
charts. The hero carries the agents robot and rotates through what the token
counts add up to: tokens this week and today, the most used model, the
busiest day, and today's prompts and sessions. Middle-clicking the bar icon
refreshes, since there's no provider left to advance to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report Codex's free rate-limit resets in its usage record
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Give the agents panel more room, and show Codex's free resets
Limit lines are a notch larger with more space between them, each account's
limits sit a clear step below its name, and sections breathe. Codex has one
limit on Pro, so its section now also says how many free full resets are
waiting and when the next one lapses.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Mark Claude's Fable limit on the Weekly meter instead of its own row
A model-scoped allowance on the same clock as a base window is drawn as a
tick on that window's meter and named in the row's tooltip.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let omarchy-default-agent set the default without launching it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let the agents panel drive adding an account without a terminal
--check says whether adding one now would be each provider's first sign-in
or an additional account, and --events reports progress as tagged lines
alongside the CLI's own output, notifies with the result, and cleans up the
login and its scratch home when cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add subscriptions and pick the default agent right in the agents panel
The + is a proper accent button, and it swaps the list for a picker of
Claude, Codex, and Grok that signs in without a terminal: name a further
account, then follow the sign-in with its status, Grok's confirmation code, a
field for Claude's pasted code, and a link to reopen the page. A dropdown at
the bottom sets the default agent without launching it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Draw the Fable tick in its meter's own color
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Revert "Let omarchy-default-agent set the default without launching it"
This reverts commit da96261f7d26bb76774cbdc1cb9e0abde92bb841.
* Make the first agent signed in the default when none is picked
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the agents panel in the bar, with setup, starters, and adding in it
A machine with no agent opens the panel on setting one up. Once set up, the
list ends with starter prompts for a new theme, plugin, or app, and a quiet
Add a subscription. The panel no longer sets the default agent, and the hero
drops its add button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Offer the starter prompts as tiles, and adding as a row beneath them
Theme, Plugin, and App each get a tile with its glyph, and Add a
subscription a matching row with the + in a tinted square. The panel is
allowed to grow tall enough to show it all without scrolling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Put the tinted add button in the agents panel's hero corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Show when a limit resets in small type under its meter
The percentage keeps the right edge to itself, so the meter runs longer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Revert "Show when a limit resets in small type under its meter"
This reverts commit 108d9de59da1af12cddbf232b0b5333ad8994c64.
* Put each account's plan beside its name, and its email in a tooltip
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Stack each limit's percentage over its time left, so the meter runs longer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Show only each limit's time left, with the exact percentage on hover
The meter already says how full a window is. Dropping the percentage beside
it leaves one calm figure per row, and the row's tooltip carries the number.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sign an existing account in again with omarchy-agent-account-add --reauth
It signs in where the account already lives: the CLI's own home (:primary)
through the normal browser, an added one through a private window. The usage
records now say which account is the primary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Offer Sign-in required in the agents panel instead of how old the numbers are
A lapsed sign-in shows as a link that signs that account in again right in
the panel. The "as of" and "last known" notes are gone; trouble that isn't
about signing in still shows as text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the separator dot out of the Sign-in required link
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the Setup > Agent Accounts menu and the stale plan
The agents panel now lists, switches, and adds accounts, so the menu's
duplicate of it goes, and the plan written before the design settled no
longer describes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Install the compiler and Qt pieces for building Omarchy-style apps
base-devel plus qt6-base, qt6-declarative, qt6-multimedia, and qt6-wayland,
which is what Hype, Monologue, and Omacut build with through qmake6 and make.
Qt was only there as a dependency of those apps, and the compiler not at all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add an omarchy-app agent skill for building apps the Omarchy way
It teaches how Hype, Monologue, and Omacut are built: C++ and Qt Quick in
one flat project, qmake6 and make into a single binary, a theme that follows
Omarchy's accent live, portal dialogs, keyboard-first conventions, Qt Test
offscreen, and a PKGBUILD that puts the app in the launcher, with starter
files that build and pass their tests as written. The agents panel's App
starter uses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Link the omarchy-app skill on existing installs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let Cancel stop a waiting login, and list a lone account's limits
Bash holds a trap until the foreground command finishes, so a login waiting
on the browser outlived Cancel. It now runs behind an interruptible wait.
With one account the usage record keeps its limits at the top level, which
omarchy agent account list now reads for the primary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Re-read identity even when signed out, and count Grok as set up
A home whose login is gone no longer keeps the identity the registry saved,
so it reads as signed out and can be added again. The agents panel leaves its
setup screen once any agent is signed in, not only once one has usage to
show, since Grok has no usage collector.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Save each account's current identity before collecting usage
A home signed in to someone else since it was added kept the old email in
the registry, which the usage records name accounts by. The usage update now
refreshes the registry from each home first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Offer Claude's paste field from the start, and keep providers with accounts
Claude's login prompts for a pasted code without a newline, so the panel's
line reader never saw it; the field is simply there for Claude sign-ins. A
provider with accounts stays listed even when the active one's limits are
unavailable, so its other accounts can still be switched to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Never autoswitch to a signed-out account, and report Codex's missing sign-in
An account nobody is signed in to is left out of switching, however much
room its cached numbers show. Codex answers a home without a login with an
error, which now reads as Waiting for auth, so the panel offers Sign-in
required for Codex accounts too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Link shared files before they exist, and only call every account over when it is
A shared file the primary home didn't have yet was left unlinked, so an
added account made its own copy and the two diverged for good; it's linked
up front now, and written in the primary home by whichever account writes it
first. The all-accounts-over notice waits until every account's limits are
actually known.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Make the agent starter tiles compact and call the section Make something cool
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hold the agents hero line until its next fade
Every usage record that landed rebuilt the summary phrases, and the hero
indexed that live list, so opening the panel could swap the line several
times between fades. It now keeps what it shows until the timed swap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Start the default agent from the agents panel hero
A console button beside the add button runs the same launcher as the
right click: the default agent, or the picker when none is set. It hides
while adding a subscription, where the add button becomes the way back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Put the add button before the agent launcher in the hero corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bring keyboard navigation back to the agents panel
The one-page redesign dropped left and right with the per-agent pages,
leaving the arrows only to scroll. They now walk everything that does
something, row by row: the hero's add and launch buttons, each
switchable account, and the starter tiles. Enter acts on the cursor,
the cursor scrolls into view, and hovering moves the same cursor so only
one thing is lit. Number keys still jump to an account.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let adding an account take over the agents hero
While adding, the hero's line reads "Add an account" in place of the
rotating summary, and the X in its corner is the only way back, so the
add view drops its own title and Back link. Each agent to add is just its
mark and name; one that can't be added is dimmed and says why on hover.
The arrows walk that list too, and Enter picks one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Show the agents to add as large marks, three across
Each agent is a large mark over its name with no box around it, in one
row the arrows move along. The chosen one turns accent and grows a touch.
The reason an agent can't be added is shortened to fit inside the panel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move between Autoswitch and Use on an account with the arrows
An account that isn't active is now two stops, Autoswitch then Use, so
left and right move between them and Enter acts on the one that's lit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Land on Use when moving up or down onto an account
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hide Use on an autoswitching account until you're on its line
With Autoswitch on, the line shows only Autoswitch. Use appears when the
line is hovered anywhere or the keyboard is on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Start adding an account with the first agent focused
Opening the add screen puts the keyboard cursor on the first agent, so
Enter picks it straight away. A focused agent lights up even before the
check says whether it can be added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the Sign in link under the account name field
Enter in the field already starts the sign-in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Key the primary Claude account's limits cache by its subscription
The primary home always used claude-limits.json, so signing it in to
another subscription could carry the old one's numbers over when the
first probe failed, and autoswitch would act on them. Once the home says
who it's signed in as, its cache is keyed by that like every other
account's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Leave Qt Multimedia out of the base packages again
Quattro dropped it once the shell no longer needed it, and the app skill
already has an app that plays audio or video add it and list it in its
own depends. The compiler and the rest of Qt stay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render the agents panel's dynamic text as plain text
Sign-in status, help text, and provider names come from outside the
shell, so none of them should be read as markup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep an account's plan and trouble clear of its Use and Autoswitch links
The details beside an account's name grew to their full width, so a long
plan or warning could run under the links on the right. They now shorten
with an ellipsis instead, and Sign-in required keeps its whole width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let primary name the first account, as the manual says
`omarchy agent account rename primary Hey` was documented but failed,
since the primary account's id is main and lookups took exact ids only.
primary now reaches the account marked primary, whatever it's been
renamed to, and no new account can take primary as its id.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Install everything an Omarchy app needs by default
The app skill builds with Qt Multimedia, SVG icons, and ffmpeg as well as
the compiler and the rest of Qt, so qt6-multimedia, qt6-svg, and ffmpeg
join the base packages and the migration. The shell still plays no video
through Qt Multimedia, which is what its test now checks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dim agent limits kept from an earlier check, with their age on hover
When a Claude probe fails, the last numbers carry on and looked just like
fresh ones. Those meters now dim, and their tooltip says how old they
are. The record carries limitsStale and limitsFetchedAt for this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Give the app skill templates for every file its build needs
The templates named src/backend.{h,cpp} and a test file without showing
them, so each app had to invent its own. They're now templated, with a
starter icon, a note that LICENSE and the icon must exist for package(),
and qt6-wayland in the PKGBUILD's depends. Scaffolded from the templates
alone, the app builds and its tests pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Start the agents panel cursor over when the agent list comes or goes
Right after the shell starts, the panel can briefly look like a first
setup and focus the first agent to add. When the records land the rows
change under the cursor, which then lit an account nobody had picked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop dead hover and limit checks from the agents panel
The tiles and hero buttons fell back on their own hover when there were
no keyboard rows, but the hero always has one, so hover only ever moves
the cursor. Stale meters only exist when there are limits, so neither
the panel nor the record needs to check for some.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop the a hotkey for adding an agent subscription
The + in the hero is the way in, by mouse or by arrowing to it. The
plugin README also catches up with the panel: the launcher, dimmed stale
limits, the new add screen, and the arrows walking a cursor rather than
scrolling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List a command family that sits under a flags-only command
`omarchy agent account` reached omarchy-agent, which takes only flags,
and failed on the word instead of listing the account commands. When the
command matched so far takes only flags and the next word names visible
commands, the router now lists them. `omarchy update aur` likewise lists
the update aur commands rather than running a full update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Refuse to remove an agent account a running session uses
Removing an account deleted its home at once, pulling the login out from
under any session started in it, though running sessions are never meant
to be touched. It now says to quit that session first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Prefer an account checked just now when switching near a limit
Autoswitch weighed numbers kept from an earlier check like fresh ones.
A parked account's sign-in lapses within hours, so a stale one stays a
candidate, but an account checked just now wins over it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Leave a user's own omarchy-app skill in place when linking ours
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reach Sign-in required with the keyboard in the agents panel
Both the link on a lapsed account and the one on a single-account agent
are now stops in the cursor's walk, and Enter signs in again. A picked
link scrolls into view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Bring the manual's agent accounts paragraph up to date
Near-limit checks run every three minutes, not every minute, and
Autoswitch now appears on hovering an account's line and takes Use's
place while it's on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the agents panel cursor on things you can act on
The active account was a stop with nothing to do, so the cursor seemed to
vanish there. It now only stops on it to sign in again. The hero's
buttons also show the cursor plainly, with an accent border and a deeper
tint instead of a shade's difference.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Never leave an added agent account's login outside the registry
Registering moved the login into its home before carrying settings over
and saving the registry, so a failure in either stranded a home holding
a sign-in that the account commands couldn't see. Settings are now
carried while the login is still pending, and a failed save moves the
home back there for the add command to clean up.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Put room before freshness when picking an account to switch to
Preferring accounts checked just now outright could pick a fresh one at
94% over a stale one at 10%. An account within 15 points of the
threshold now counts as near its limit however fresh, so accounts with
room come first and freshness only decides among them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Check agent limits more often relative to the switch threshold
Faster checks started at a fixed 80%, so a threshold set lower could be
crossed and wait out the 15-minute interval. They now start 15 points
below the threshold, which is still 80% at the default 95%.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Codex 0.158's app-server can leave account/read unanswered, and asking it
first lost the limits whenever it did, leaving the agents panel showing
"Codex limits unavailable". The limits name the plan themselves, so they're
asked first and account/read is only a short fallback when they don't.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
fzf's completion.bash rewraps the completions of ~76 commands on every
interactive shell start, costing ~25ms once bash-completion is loaded. Keep
only the key bindings (Ctrl-R, Ctrl-T, Alt-C); **<Tab> fuzzy completion goes.
`starship init bash` only prints a line that runs starship again with
--print-full-init, so call that directly and start the binary once.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A machine without a GPU, like most VMs, renders through llvmpipe on the
CPU, where every animated frame and every translucent window costs. In a
VM, opening and closing a terminal took ~5s of CPU; a panel ~3.4s.
omarchy toggle animations (also under Toggle > Animations) places a Hyprland
flag that turns off animations, blur and shadows and makes windows opaque.
The shell follows Hyprland's animations:enabled, rereading it on every
config reload: its one-shot animations run for Style.duration(ms), which
is then 0, and its spinners, pulses and title marquee hold still. A new
install in a VM starts with the flag in place.
Measured in the ISO test VM (llvmpipe), CPU per interaction:
terminal open+close 5000ms -> 481ms, workspace switch 1670ms -> 409ms,
audio panel 3446ms -> 796ms, volume OSD 2324ms -> 584ms, menu 2028ms ->
1241ms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hand browser and web app launches to the running browser directly
With a Chromium-based browser already running, each launch started a second
browser process only to pass its command line over the profile's singleton
socket and exit, ~165ms before the running browser even heard of it.
omarchy-cmd-browser-handoff sends that message itself with socat and waits
for the ACK, so a web app opens in ~210ms instead of ~430ms.
It hands off only what it can do exactly as the browser would: the packaged
browser binary rather than a wrapper, a flags file holding nothing beyond the
process flags Omarchy ships, no other data directory, and a socket we own.
Anything else, or no answer, launches the browser as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hand Brave Origin launches to the running browser too
/usr/bin/brave-origin is the package's own launcher, reading
brave-origin-flags.conf, with the profile in BraveSoftware/Brave-Origin.
A web app now opens in ~158ms instead of ~345ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Collapse identical notifications from the same sender into one toast
A web app open in several tabs fires one notification per tab for a single
reminder, stacking identical toasts. A new notification matching an on-screen
toast's app, summary, and body now replaces it like a replaces_id update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Only collapse live duplicates that share image and click target
Screen recording toasts share text but preview and open different files, and
replayed history rows share images with entries still in history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Compare a notification's current content when collapsing duplicates
A replaces_id update can land while the insert is deferred, so the initial
snapshot may no longer describe what the notification says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
To open a new terminal in the focused terminal's directory, the launcher
asked Hyprland for the active window with hyprctl, ~10ms on every
SUPER+RETURN. The binding now reads the pid from hl.get_active_window() and
passes it as --pid. Without one, from the menu or a shell, the launcher asks
Hyprland as before.
The bind is now a Lua function, which Hyprland reports only as __lua, so
o.bind_commands records the command it stands for and the keybindings menu
still launches a terminal when the entry is picked.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Read the default browser from mimeapps.list when launching
omarchy-launch-browser and omarchy-launch-webapp asked xdg-settings for the
default browser on every launch, ~72ms through several POSIX shell scripts.
The new omarchy-cmd-default-browser reads the http handler from the
config-dir mimeapps.list files the way xdg-mime does, desktop-specific list
first, taking the first listed entry whose command is installed, in ~10ms.
With nothing set there it falls back to xdg-settings as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Let the first copy of a browser entry decide whether it is installed
A user-local entry whose browser is gone could be rescued by a system copy
of the same ID, which the launchers never read. xdg-mime judges the first
copy found, as the launchers use it, so do the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Add SSH Agent as an optional service install
Enables gcr-ssh-agent (already shipped via the gnome-keyring dependency)
so passphrase-protected SSH keys work from any context: the agent prompts
graphically on first use, with opt-in passphrase storage in the keyring.
Adds install/remove commands and Install > Service / Remove > Service
menu entries.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BReZWvvLsDRUaqgjiRzvZ5
* Clear the agent's SSH_AUTH_SOCK when removing the SSH agent service
The socket's ExecStartPost exports SSH_AUTH_SOCK into the user manager with set-environment, which disabling the socket does not undo, so apps launched after removal still pointed at a stopped agent. The environment.d file also has to be deleted before disable reloads the manager, or the generator re-exports it. Only an SSH_AUTH_SOCK pointing at gcr is cleared, so another agent's stays.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move SSH Agent setup to Setup > Security
Turning on an SSH agent is security configuration of the machine rather than installing software, so it sits with SSHD and the other Setup > Security entries. It hides once enabled, as Sudoless Docker does, and Remove > Service > SSH Agent turns it back off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Hype joins Omacut, Monologue, Omacalc and Omawrite as an Omacom app in
the base install and the preinstall set, so Remove and Install
Preinstalls cover it too. A migration installs it on existing machines,
unless their owner has removed the preinstalls, and the GUIs chapter of
the manual introduces it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Flip Elsewhen between Fahrenheit and Celsius with Shift+T
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Flip Elsewhen's temperature units with Alt+T instead of Shift+T
PanelKeyCatcher's textKey now carries the held modifiers, which is how the
panel tells Alt+T from T. Existing handlers take only the text and are
unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A row lit itself by lifting its own time-of-day fill, so a picked night row
could read darker than the daytime rows around it. The picked city now takes
midday's lifted fill, the brightest, whatever its time of day; hover still
lifts each row from its own.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Monologue is Omarchy's own webcam recorder: pick a camera and microphone
once, press Space to record, and stop straight into a built-in editor
to split, trim and remove clips before saving an MP4.
Ship it in the base packages alongside Omacut, include it in the
preinstall restore/remove lists, and describe it in the manual. A
migration installs it on existing machines unless the user removed the
preinstalls.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Flip Elsewhen between 24-hour and AM/PM time with t
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Line up Elsewhen's weather in one column
The temperature and weather icon sat against each row's time, which is
narrower for "4:06" than "10:06", and shared the name's slack. The time
column now takes the widest time's width in every row, and a spacer holds
the weather against it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Navigate Elsewhen from the keyboard and summon it with Super+Ctrl+Alt+E
Up and down walk home and the cities, lighting the picked row and turning
the globe to it. Left and right move the clocks an hour, held until Escape
or close. Escape now clears a shifted time before leaving the globe.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reach Add a city from the keyboard and shift time past a day
Down past the last city selects Add a city, where Return or Space opens the
search. The arrow keys no longer stop at twelve hours, and shifts past a day
read in days.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete the picked Elsewhen city from the keyboard
Delete (or x) removes the picked city and moves the cursor to the one that
takes its place. The picked row shows its × so the target is plain. Delete
now reaches every panel's deleteRequested, as it already does in the
clipboard and the menu.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Center bar glyphs on the open-panel underline
The 16px icon canvas in the 27px slot was snapped from 5.5 to 6, and the
glyph's fractional centering correction was snapped too, so glyphs sat up to
0.9px right of the underline, which centers on the slot. Both are now placed
exactly, and the geometry test measures against the slot to within 0.05px.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Answer the Elsewhen panel over the shell's IPC socket
The Elsewhen panel arrived with a plain IpcHandler, so omarchy-shell
reached it only through the slower qs ipc fallback, and the test that
every first-party handler registers as ShellIpc failed on quattro.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Remove the IPC socket of each shell a test starts
The runtime smoke and screenshot sanity tests start the real shell from a
temporary copy and kill it, which leaves its IPC socket behind in
XDG_RUNTIME_DIR. A session that runs the suite a few times collected
dozens of them.
base-test.sh gains shell_ipc_socket, which derives a shell's socket as
omarchy-shell does, and both tests remove theirs in cleanup. The socket
test derives its fixture's socket through it too, so the helper cannot
drift from omarchy-shell.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Every plugin change handed the panel Instantiator a fresh array, which
rebuilds every panel. The panels were rebuilt four times in the first
700ms of startup, each rebuild starting a new asynchronous load of every
keepLoaded panel while the last was still in flight. Under load two OSDs
could run at once, each registering the osd IPC handler: the runtime
smoke test's intermittent "another handler is registered for target
osd".
The entries now live in a ListModel synced in place. A panel whose
plugin still loads the same way keeps its loader, so startup adds each
panel once, and a full plugin reload still clears the model to rebuild
from fresh code.
Under a six-core busy load the smoke test hit the duplicate in 1 of 5
runs on quattro and in none of 10 with this change.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A city on this machine's zone becomes homeCity, the zone's own city clears
it, and a city on another zone leaves it alone. Ported from omacom/elsewhen#5.
Co-authored-by: Shawn Yeager <shawn@shawnyeager.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Move Elsewhen into Omarchy as omarchy.elsewhen
The world clock ships in the shell tree instead of its own package. A
migration renames existing bar entries with their settings and removes
the retired package.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Remove Elsewhen's shelved Earth row, overlap band and sky tint
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tidy Elsewhen's models, data helper and docs, and drop currency
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Restructure Elsewhen's panel and globe on the shared shell components
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Show Elsewhen's bar globe upright
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Use the shared city search for Elsewhen's globe jump bar
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep legacy Elsewhen entries single and retry offline geocodes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fetch Elsewhen's weather with curl instead of a Python helper
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The OSD, the reminder flow and the Wi-Fi QR code now keep a surface that
parks as a 1x1 in the corner and grows when shown. They were missing from
the layer rule that turns Hyprland's layer animation off for the shell's
overlays, so Hyprland animated that growth: the OSD flew in from the left.
Add them to the rule, and test that every OverlayWindow's namespace is in
it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Answer omarchy-shell calls over the shell's own socket
Every omarchy-shell call started a qs ipc client, ~45ms of startup for one
IPC call: a theme switch makes two, and every script-driven OSD, toggle
refresh and lock query paid it too.
The shell now serves a socket in XDG_RUNTIME_DIR, named from its config
path and Wayland display as qs ipc selects its instance, and omarchy-shell
tries it first through socat, which starts in ~5ms. First-party handlers
register as ShellIpc, an IpcHandler that qs ipc still reaches, and the
socket calls only the functions a handler declares with their exact
argument count, allowed by name so QObject methods such as destroy() stay
out of reach.
When the shell ran nothing it answers SKIP, and omarchy-shell asks qs ipc
for its exact answer, so errors, third-party plugins and an unreachable
socket behave as before. A call that may have run is never retried: a
timeout or a connection closed without an answer reports the shell as not
responding.
omarchy-shell shell ping takes ~13-18ms instead of ~61ms, and omarchy-osd
reaches the screen in ~36ms instead of ~77ms. Output and exit status match
the qs ipc path across 26 calls, errors and quiet mode included.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Only accept whole socket replies and retry only unmade connections
A reply cut off after its OK prefix passed for the whole answer, and an
empty reply with socat failing was retried through qs ipc although the
request might already have been delivered.
An answer now counts only once its record separator arrived. socat's own
errors join the reply, so only its connect error, a socket nothing
listens on, falls back to qs ipc beside an explicit SKIP; anything else
is reported as not responding rather than retried.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Add a theme-set sample hook that mirrors themes to herdr machines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Mirror theme changes to herdr machines by default
Replaces the sample hook with omarchy-theme-sync, which omarchy-theme-set
starts detached after every theme change, and a theme-sync-off toggle that
stops a machine from both sending and receiving.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename omarchy-theme-sync to omarchy-theme-set-herdr-machines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Label the toggle Herdr Theme Sync and extract its menu guard
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Answer the Herdr Theme Sync menu guard from omarchy-theme-set-herdr-machines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sync herdr machines one at a time and drop the dry run
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Check the theme sync toggle under the lock and stop special-casing this machine
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Make herdr theme sync opt-in
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The lock started decoding its wallpaper only once locked, with the cache
off, and first at the view's unsized native resolution. A machine
suspending right after locking froze that decode partway, so waking
showed the password field on a bare background and the wallpaper
popped in after it. On this machine the wallpaper took ~208ms to become
ready, and the suspend followed the lock by 66ms.
The lock service now keeps each screen's lock wallpaper decoded in the
image cache, as the lock view requests it: same URL, the screen's
logical size, PreserveAspectCrop. The view waits for its size and reads
from the cache, so the wallpaper is ready within ~3ms of the lock
starting. The version in the cached URL follows the file's mtime and
size, so a wallpaper overwritten in place still reloads.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Each brightness key ran omarchy-brightness-display: resolving the focused
monitor and backlight device, checking for an Apple display, reading,
writing and reading back through brightnessctl, then omarchy-osd over a
qs IPC client. That is 64-133ms from keypress to OSD depending on load,
on keys that repeat while held.
The brightness up and down keys now dispatch global shortcuts. On an
internal panel the shell reads the level from sysfs, steps it by the
script's rules, writes it with one brightnessctl, and shows the OSD from
the level read back. A press overlapping one still being applied is
dropped, as the script's flock drops it. External and Apple displays
fall back to the script, which drives them over DDC or their own helper.
The absolute and precise brightness keys still run the script.
Across 24 steps from eight starting levels the shell and the script land
on identical levels, and keypress to OSD drops to ~31ms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
omarchy-launch-webapp asked xdg-settings for the default browser with
BROWSER still set to omarchy-launch-browser, which sends it down a
slower path to the same answer: ~105ms instead of ~30ms on every web app
launch. Unset it, as omarchy-launch-browser already does.
omarchy-cmd-terminal-cwd found the focused terminal's shell with pgrep,
which scans all of /proc on every new terminal. Read the terminal's
child lists from /proc instead, keeping the newest child as before.
Web app wrapper overhead drops from ~111ms to ~34ms, and a new terminal
appears in ~77ms instead of ~90ms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Step the volume in the shell instead of a script per keypress
Each volume key ran omarchy-audio-output-volume: several pactl calls in
bash, then omarchy-osd delivering the OSD over a qs IPC client, ~165ms
from keypress to OSD, on keys that repeat while held.
The volume up, down and mute keys now dispatch global shortcuts that the
media service handles over PipeWire, stepping, clamping, unmuting and
debouncing by the script's rules and showing the same OSD. It acts only
when the default sink is an ALSA sink, which is its own physical sink.
Any other default, a DSP chain or EasyEffects above all, falls back to
the script, which resolves the physical sink from the live routing on
every press. The precise +1/-1 keys still run the script.
Keypress to OSD drops from ~168ms to ~20ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Run media and notification keys in the shell without an IPC client
The media keys and the notification dismiss, invoke and history keys ran
omarchy-shell, starting a qs client for one argument-free IPC call.
A new ipc shortcut kind names such a call as target.method. The shell
hands it to the service that owns the target, which runs its own
IpcHandler function, so the key behaves exactly as the omarchy-shell
call did. A call missing from the list binds through omarchy-shell.
Dismissing a notification with SUPER+comma clears the popup in ~11ms
instead of ~40ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fix(screensaver): open in own special workspace instead of active
- The screensaver window rule sets fullscreen, and a workspace holds
only one fullscreen window
- Launching it on the active workspace drops the fullscreen window
already there, and leaves it windowed after the screensaver quits
* Keep a showing special workspace open through the screensaver
A monitor shows one special workspace at a time, so opening the screensaver on its own replaced a visible scratchpad, and it stayed hidden after the screensaver closed. Open it on the special workspace that is already showing instead; it covers that just as well, and the workspace is still there when it goes.
The test's stubbed event stream follows the one in #10870.
Co-Authored-By: Willem van Ede <37050539+WillemCR@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hand focus back after the screensaver closes
Hyprland focuses a monitor when its special workspace empties, so on more than one monitor keyboard focus ended up wherever the last screensaver happened to close, rather than where it was. A detached reader on the launcher's event stream waits for the last one to go and focuses the original monitor again; the launcher itself still exits straight away, as the idle service expects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep a remapped screensaver off the regular workspaces
The terminal occasionally maps its window again as it closes, after its special workspace is gone. The launcher's workspace only applies to the first map, so the window landed on the focused monitor's regular workspace, where its fullscreen rule took fullscreen from the window there. On Hyprland 0.56.2 with two monitors this happened in 4 of 45 cycles, each time losing the user's fullscreen. A class rule now sends any later map to a hidden special workspace; the launcher's exec rule still wins on the first map.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Check for screensavers before waiting on their close
The focus watcher only looked for remaining screensavers after reading a closewindow, so one that never mapped, or closed while the launcher was still waiting on another monitor, left it blocked until some unrelated window closed, and then it pulled focus back to the old monitor. It now checks before each wait, and matches the exact class, passed through the environment so the screensaver's pgrep and pkill never see it in argv.
Co-Authored-By: Codex Medium <noreply@openai.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Willem van Ede <37050539+WillemCR@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Codex Medium <noreply@openai.com>
The menu, emoji picker, clipboard, OSD, reminder flow and Wi-Fi QR code
mapped a fresh surface on every open. Qt drew its first frames before
Hyprland sent the surface's fractional scale: the pixel ratio stepped
2, 1, then 1.6, so on a 1.6 display each overlay showed blurry for
~350ms before going sharp.
A new OverlayWindow keeps the surface. Hidden, it parks as a 1x1,
input-less layer below windows, off the overlay layer so it never
blocks direct scanout. Showing only resizes and raises it, so the scale
is already settled. Content stays hidden until the surface has grown,
so no 1x1 frame is stretched across the screen, and the window follows
the focused monitor each time it is shown. The image picker's own
fullscreen parking moves onto it too.
Each parked overlay keeps a Qt window alive: at rest the shell holds
~40 MiB more RSS and ~20 MiB more GPU memory.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Every binding that opened a menu or panel ran omarchy-menu or
omarchy-shell, which starts a qs client just to deliver one IPC call:
~60ms before the shell heard about the keypress.
The shell now registers a Hyprland global shortcut for each menu route
and panel in default/omarchy/shortcuts, and o.bind turns { menu = ... }
and { panel = ... } into hl.dsp.global for those, so a keypress spawns
nothing. A route or panel missing from the list binds through the
command as before. The default menu and panel bindings use the new form.
SUPER+SPACE opens the menu in ~31ms instead of ~94ms, measured from a
simulated keypress until the menu layer maps.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Speed up theme switch by backgrounding preload and parallelizing browser refresh
`omarchy theme set` was blocking on `omarchy-theme-switcher --preload` (~1.1s)
and serially refreshing every Chromium-family browser (~1.0-1.5s), making a
picked theme feel slow even though the shell recolored instantly.
- Background `omarchy-theme-switcher --preload` like the background cache
- In `omarchy-theme-set-browser`, skip the privileged policy write and browser
refreshes when every existing `color.json` already has the requested color
- Refresh only running browsers, and run those refreshes in parallel
Fixes#12627.
Generated with [Devin](https://devin.ai)
Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
* Harden the unchanged-color shortcut in omarchy-theme-set-browser
Review feedback identified that the original shortcut could vacuously skip
when no managed policy directories existed, and that it accepted a color.json
whose ownership or contents the privileged writer would have rewritten.
- Only skip when at least one managed directory exists and every existing
color.json is a regular, root-owned 0644 file containing the canonical JSON
- Add OMARCHY_BROWSER_POLICY_DIRS as a test-only override so the setter's
unchanged-color check does not depend on the host's real /etc policy files
- Update browser-policy-sudoers-test.sh to use that override, and make
theme-set-browser-test.sh behavioral rather than grep-only
Generated with [Devin](https://devin.ai)
Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
* Find running browsers with one process scan during the policy write
Each browser check ran its own pgrep, and every pgrep rescans /proc,
~40ms apiece. Read the process table once with ps while the policy
writer runs, keeping its stdin so a terminal sudo prompt stays in the
terminal, then refresh the running browsers in parallel.
Chrome's fallback to plain google-chrome never ran: the refresh helper
returned success for a missing browser, so the || branch was dead. Pick
whichever Chrome binary exists up front instead.
The unchanged-color shortcut keeps its root:root 0644 check without the
fallback for hosts lacking stat -c, which Omarchy never runs on. Its
tests stub stat, ps and command discovery, so they neither depend on
nor touch the host's browsers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Decode the next theme background while the theme stages
The wipe waited 125-290ms after the transition arrived, decoding the new
wallpaper. Most stock wallpapers are WebP, which Qt decodes at full size
and scales afterwards, so a screen-sized sourceSize does not shorten it.
Start the decode earlier instead. omarchy-theme-set chooses the next
background and snapshots it before rendering templates, then sends a new
background prepare call in the background. The shell loads it into the
hidden incoming frame, so the transition finds it decoded. A prepare that
arrives after its transition is ignored, and one no transition claims is
dropped after five seconds.
The wipe now starts ~255ms after omarchy-theme-set begins instead of
~345-490ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Decode the wallpaper at screen size instead of shipped size
Wallpapers decoded at the resolution they were shipped at: a 5120x2880
stock wallpaper took 5120x2880 of RGBA on a 1920x1200 panel, and a
transition held up to three such frames. Bind sourceSize on the
displayed wallpaper and both transition frames to the screen's physical
size. PreserveAspectCrop treats it as the area to cover, so the image
still fills the screen.
Qt scales a decode up as well as down to cover sourceSize, so the native
size is read from the file header first with magick identify, and a
wallpaper smaller than the screen decodes at its own size. The images
wait for both sizes, so nothing decodes at native size first.
Ported from #8324 onto BackgroundMedia and the prepared incoming frame.
Measured with a 5120x2880 wallpaper, the shell's GPU memory at rest
drops from 264 MiB to ~148 MiB. The size probe delays the reveal by
~30ms, which the earlier prepare still more than covers.
Co-authored-by: Ryan Yogan <ryanyogan@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Ryan Yogan <ryanyogan@gmail.com>
A theme switch waits on omarchy-theme-set-templates before the shell
transition starts, and it spent ~670ms spawning processes: a subshell
per color for its rgb form, a grep per template per function family, an
awk per mix, and a sed per template matching every line against
hundreds of patterns.
Helpers now return through REPLY, one grep finds the function tokens
across all templates, and one awk computes the mixes with the same
floating point rounding and renders every template. Output is byte for
byte identical across all shipped themes. Generation takes ~65ms, and
the transition starts ~130ms after omarchy-theme-set begins instead of
~740ms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Run menu summon actions in-process
A menu action that only summons another shell plugin spawned bash and a
qs ipc client to ask this same shell to do it, about 60ms of the path.
Call shell.summon directly instead, and fall back to bash when the call
is refused or the action is anything more than a bare summon.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Open the theme picker from rows held in the shell
Opening the theme picker ran omarchy-theme-switcher to rebuild its index
and then made a second IPC call, about 170ms before the picker mapped.
The picker now holds the theme rows itself, opens from them at once, and
refreshes them behind the open via omarchy-theme-switcher --print-rows.
It applies the chosen theme with omarchy-theme-set directly, so
omarchy-theme-set no longer preloads the picker.
From the keybinding to the overlay mapped drops from ~245ms to ~83ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the image picker surface mapped between opens
Each open mapped a fresh surface, which rendered its first frames before
Hyprland sent its fractional scale: the pixel ratio stepped 2, 1, then
1.6, so the picker flashed blurry for ~130ms and re-uploaded every
thumbnail texture. Keep the surface and park it transparent and
input-less on the bottom layer while closed, since anything on the
overlay layer blocks direct scanout for fullscreen apps. It follows the
focused monitor on each open.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
5db4a401 fixed the installer, but machines already installed offline
still pin Node to the ISO's exact version, so mise up never updates it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Stopping stay-awake sends TERM to the held process, which was an exec'd
sleep. systemd-inhibit reports a child killed by a signal as an error, so
every update ended with "'/usr/bin/setpriv' terminated by signal TERM."
The held process now stays a shell that traps TERM, kills its sleep, and
exits cleanly.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
