New solution to haptic touchpad

bin/omarchy-haptic-touchpad

@@ -0,0 +1,95 @@
+#!/usr/bin/env python3
+
+"""Haptic feedback daemon for Synaptics touchpads with Manual Trigger.
+
+Monitors touchpad button press events and sends haptic pulses via HID
+feature reports. Required because the kernel's HID haptic subsystem only
+supports Auto Trigger with waveform enumeration, not the simpler Manual
+Trigger protocol used by these Synaptics touchpads.
+"""
+
+import fcntl, glob, os, struct, sys
+
+VENDOR = "06CB"
+PRODUCT = "D01A"
+REPORT_ID = 0x37
+INTENSITY = 40  # 0-100
+
+# input_event: struct timeval (16 bytes on 64-bit) + type(H) + code(H) + value(i)
+EVENT_FORMAT = "llHHi"
+EVENT_SIZE = struct.calcsize(EVENT_FORMAT)
+EV_KEY = 0x01
+BTN_LEFT = 272
+BTN_RIGHT = 273
+BTN_MIDDLE = 274
+
+# ioctl: HIDIOCSFEATURE(len) = _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+def HIDIOCSFEATURE(length):
+    return 0xC0000000 | (length << 16) | (ord("H") << 8) | 0x06
+
+
+def find_hidraw():
+    for path in sorted(glob.glob("/sys/class/hidraw/hidraw*")):
+        uevent = os.path.join(path, "device", "uevent")
+        try:
+            with open(uevent) as f:
+                content = f.read().upper()
+            if f"0000{VENDOR}" in content and f"0000{PRODUCT}" in content:
+                return os.path.join("/dev", os.path.basename(path))
+        except OSError:
+            continue
+    return None
+
+
+def find_touchpad_event():
+    for path in sorted(glob.glob("/sys/class/input/event*/device/name")):
+        try:
+            with open(path) as f:
+                name = f.read().strip().upper()
+            if VENDOR in name and PRODUCT in name and "TOUCHPAD" in name:
+                event = path.split("/")[-3]
+                return os.path.join("/dev/input", event)
+        except OSError:
+            continue
+    return None
+
+
+def main():
+    hidraw = find_hidraw()
+    if not hidraw:
+        print("No Synaptics haptic touchpad hidraw device found", file=sys.stderr)
+        sys.exit(1)
+
+    event = find_touchpad_event()
+    if not event:
+        print("No Synaptics haptic touchpad input device found", file=sys.stderr)
+        sys.exit(1)
+
+    print(f"Haptic touchpad: hidraw={hidraw} input={event} intensity={INTENSITY}", flush=True)
+
+    haptic_report = struct.pack("BB", REPORT_ID, INTENSITY)
+    ioctl_req = HIDIOCSFEATURE(len(haptic_report))
+
+    hidraw_fd = os.open(hidraw, os.O_RDWR)
+    event_fd = os.open(event, os.O_RDONLY)
+
+    try:
+        while True:
+            data = os.read(event_fd, EVENT_SIZE)
+            if len(data) < EVENT_SIZE:
+                continue
+            _, _, ev_type, code, value = struct.unpack(EVENT_FORMAT, data)
+            if ev_type == EV_KEY and code in (BTN_LEFT, BTN_RIGHT, BTN_MIDDLE) and value == 1:
+                try:
+                    fcntl.ioctl(hidraw_fd, ioctl_req, haptic_report)
+                except OSError:
+                    pass
+    except KeyboardInterrupt:
+        pass
+    finally:
+        os.close(event_fd)
+        os.close(hidraw_fd)
+
+
+if __name__ == "__main__":
+    main()

install/config/hardware/dell/fix-xps-haptic-touchpad.sh

@@ -1,31 +1,35 @@
-# Fix Dell XPS haptic touchpad losing haptic feedback after suspend/resume.
-# The I2C controller's runtime power management aggressively suspends the touchpad,
-# and on resume the haptic engine sometimes fails to reinitialize.
-# This udev rule keeps the I2C controller always on to prevent that.
-# Applies to any Dell XPS with the Synaptics haptic touchpad (06CB:D01A).
+# Fix Dell XPS haptic touchpad.
+# The Synaptics haptic touchpad (06CB:D01A) uses the HID Manual Trigger
+# protocol, but the kernel's HID haptic subsystem only supports Auto Trigger.
+# This sets up a lightweight daemon that monitors touchpad button events and
+# sends haptic pulses via HID feature reports on the hidraw device.
+# Also disables I2C runtime PM to prevent the haptic engine losing state
+# across suspend/resume.
 
 if omarchy-hw-match "XPS" \
   && ls /sys/bus/i2c/devices/i2c-VEN_06CB:00 2>/dev/null; then
 
-  # Disable runtime PM for I2C controller so haptic state isn't lost
+  # Keep I2C controller power on to prevent haptic engine losing state
   sudo tee /etc/udev/rules.d/99-dell-xps-haptic-touchpad.rules << 'EOF'
 ACTION=="add", SUBSYSTEM=="pci", KERNEL=="0000:00:19.0", ATTR{power/control}="on"
 ACTION=="add", SUBSYSTEM=="platform", KERNEL=="i2c_designware.0", ATTR{power/control}="on"
 EOF
   sudo udevadm control --reload-rules
 
-  # Rebind the I2C HID touchpad on boot and resume to reinitialize haptic engine
-  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << 'SVC'
+  # Haptic feedback daemon as a systemd service
+  sudo tee /etc/systemd/system/dell-xps-haptic-touchpad.service << SVC
 [Unit]
-Description=Rebind Dell XPS haptic touchpad
+Description=Dell XPS haptic touchpad feedback
 After=systemd-udev-settle.service
 
 [Service]
-Type=oneshot
-ExecStart=/bin/bash -c 'if [[ -d /sys/bus/i2c/devices/i2c-VEN_06CB:00 ]]; then echo "i2c-VEN_06CB:00" | tee /sys/bus/i2c/drivers/i2c_hid_acpi/unbind > /dev/null 2>&1; sleep 1; echo "i2c-VEN_06CB:00" | tee /sys/bus/i2c/drivers/i2c_hid_acpi/bind > /dev/null 2>&1; fi'
+Type=simple
+ExecStart=$OMARCHY_PATH/bin/omarchy-haptic-touchpad
+Restart=on-failure
+RestartSec=2
 
 [Install]
-WantedBy=multi-user.target suspend.target hibernate.target
+WantedBy=multi-user.target
 SVC
   sudo systemctl daemon-reload
   sudo systemctl enable dell-xps-haptic-touchpad.service