Merge branch 'dev' into rc
This commit is contained in:
David Heinemeier Hansson
@@ -15,7 +15,6 @@ if [[ -f $FIRST_RUN_MODE ]]; then
|
||||
bash "$OMARCHY_PATH/install/first-run/dns-resolver.sh"
|
||||
bash "$OMARCHY_PATH/install/first-run/gnome-theme.sh"
|
||||
bash "$OMARCHY_PATH/install/first-run/elephant.sh"
|
||||
bash "$OMARCHY_PATH/install/first-run/powerprofilesctl-rules.sh"
|
||||
sudo rm -f /etc/sudoers.d/first-run
|
||||
|
||||
bash "$OMARCHY_PATH/install/first-run/welcome.sh"
|
||||
|
||||
@@ -14,9 +14,22 @@ if ! command -v limine-mkinitcpio &>/dev/null; then
|
||||
fi
|
||||
|
||||
MKINITCPIO_CONF="/etc/mkinitcpio.conf.d/omarchy_resume.conf"
|
||||
SWAP_FILE="/swap/swapfile"
|
||||
RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
|
||||
|
||||
# Check if hibernation is already configured
|
||||
if [[ -f $MKINITCPIO_CONF ]] && grep -q "^HOOKS+=(resume)$" "$MKINITCPIO_CONF"; then
|
||||
# Fix empty resume_offset if btrfs map-swapfile failed during initial setup
|
||||
if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
|
||||
RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
|
||||
if [[ -n $RESUME_OFFSET ]]; then
|
||||
echo "Fixing empty resume_offset ($RESUME_OFFSET)"
|
||||
sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
|
||||
sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
|
||||
sudo limine-mkinitcpio
|
||||
sudo limine-update
|
||||
fi
|
||||
fi
|
||||
echo "Hibernation is already set up"
|
||||
exit 0
|
||||
fi
|
||||
@@ -29,7 +42,6 @@ if [[ $1 != "--force" ]]; then
|
||||
fi
|
||||
|
||||
SWAP_SUBVOLUME="/swap"
|
||||
SWAP_FILE="$SWAP_SUBVOLUME/swapfile"
|
||||
|
||||
# Create btrfs subvolume for swap
|
||||
if ! sudo btrfs subvolume show "$SWAP_SUBVOLUME" &>/dev/null; then
|
||||
@@ -68,15 +80,18 @@ sudo cp -p "$OMARCHY_PATH/default/systemd/system-sleep/keyboard-backlight" /usr/
|
||||
|
||||
# Add resume= kernel parameters so the initramfs resume hook knows where to find the
|
||||
# hibernation image. Without these, resume happens late (after GPU drivers load) and fails.
|
||||
RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
|
||||
if [[ ! -f $RESUME_DROP_IN ]]; then
|
||||
echo "Adding resume kernel parameters"
|
||||
sudo swapon -p 0 "$SWAP_FILE" 2>/dev/null
|
||||
RESUME_DEVICE=$(findmnt -no SOURCE -T "$SWAP_FILE" | sed 's/\[.*\]//')
|
||||
RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE")
|
||||
sudo mkdir -p /etc/limine-entry-tool.d
|
||||
echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
|
||||
sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
|
||||
if [[ -n $RESUME_OFFSET ]]; then
|
||||
sudo mkdir -p /etc/limine-entry-tool.d
|
||||
echo "KERNEL_CMDLINE[default]+=\" resume=$RESUME_DEVICE resume_offset=$RESUME_OFFSET\"" | sudo tee "$RESUME_DROP_IN" >/dev/null
|
||||
sudo tee -a /etc/default/limine < "$RESUME_DROP_IN" >/dev/null
|
||||
else
|
||||
echo "Warning: Could not determine resume offset for $SWAP_FILE" >&2
|
||||
fi
|
||||
fi
|
||||
|
||||
# Use ACPI alarm for RTC wakeup on s2idle systems (needed for suspend-then-hibernate)
|
||||
|
||||
@@ -5,7 +5,7 @@
|
||||
browser=$(xdg-settings get default-web-browser)
|
||||
|
||||
case $browser in
|
||||
google-chrome* | brave-browser* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
|
||||
google-chrome* | brave* | microsoft-edge* | opera* | vivaldi* | helium*) ;;
|
||||
*) browser="chromium.desktop" ;;
|
||||
esac
|
||||
|
||||
|
||||
@@ -14,11 +14,11 @@ if omarchy-cmd-present chromium || omarchy-cmd-present brave; then
|
||||
|
||||
if omarchy-cmd-present chromium; then
|
||||
echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/chromium/policies/managed/color.json" >/dev/null
|
||||
chromium --refresh-platform-policy --no-startup-window >/dev/null
|
||||
chromium --refresh-platform-policy --no-startup-window &>/dev/null
|
||||
fi
|
||||
|
||||
if omarchy-cmd-present brave; then
|
||||
echo "{\"BrowserThemeColor\": \"$THEME_HEX_COLOR\", \"BrowserColorScheme\": \"device\"}" | tee "/etc/brave/policies/managed/color.json" >/dev/null
|
||||
brave --refresh-platform-policy --no-startup-window >/dev/null
|
||||
brave --refresh-platform-policy --no-startup-window &>/dev/null
|
||||
fi
|
||||
fi
|
||||
|
||||
+73
-47
@@ -1,18 +1,18 @@
|
||||
#? Config file for btop
|
||||
#? Config file for btop v.1.4.6
|
||||
|
||||
#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
|
||||
#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
|
||||
color_theme = "current"
|
||||
|
||||
#* If the theme set background should be shown, set to False if you want terminal background transparency.
|
||||
theme_background = True
|
||||
theme_background = true
|
||||
|
||||
#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
|
||||
truecolor = True
|
||||
truecolor = true
|
||||
|
||||
#* Set to true to force tty mode regardless if a real tty has been detected or not.
|
||||
#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
|
||||
force_tty = False
|
||||
force_tty = false
|
||||
|
||||
#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
|
||||
#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
|
||||
@@ -22,10 +22,13 @@ presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:defaul
|
||||
|
||||
#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
|
||||
#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
|
||||
vim_keys = True
|
||||
vim_keys = true
|
||||
|
||||
#* Rounded corners on boxes, is ignored if TTY mode is ON.
|
||||
rounded_corners = True
|
||||
rounded_corners = true
|
||||
|
||||
#* Use terminal synchronized output sequences to reduce flickering on supported terminals.
|
||||
terminal_sync = true
|
||||
|
||||
#* Default symbols to use for graph creation, "braille", "block" or "tty".
|
||||
#* "braille" offers the highest resolution but might not be included in all fonts.
|
||||
@@ -60,37 +63,40 @@ update_ms = 2000
|
||||
proc_sorting = "cpu lazy"
|
||||
|
||||
#* Reverse sorting order, True or False.
|
||||
proc_reversed = False
|
||||
proc_reversed = false
|
||||
|
||||
#* Show processes as a tree.
|
||||
proc_tree = False
|
||||
proc_tree = false
|
||||
|
||||
#* Use the cpu graph colors in the process list.
|
||||
proc_colors = True
|
||||
proc_colors = true
|
||||
|
||||
#* Use a darkening gradient in the process list.
|
||||
proc_gradient = True
|
||||
proc_gradient = true
|
||||
|
||||
#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
|
||||
proc_per_core = False
|
||||
proc_per_core = false
|
||||
|
||||
#* Show process memory as bytes instead of percent.
|
||||
proc_mem_bytes = True
|
||||
proc_mem_bytes = true
|
||||
|
||||
#* Show cpu graph for each process.
|
||||
proc_cpu_graphs = True
|
||||
proc_cpu_graphs = true
|
||||
|
||||
#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
|
||||
proc_info_smaps = False
|
||||
proc_info_smaps = false
|
||||
|
||||
#* Show proc box on left side of screen instead of right.
|
||||
proc_left = False
|
||||
proc_left = false
|
||||
|
||||
#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
|
||||
proc_filter_kernel = False
|
||||
proc_filter_kernel = false
|
||||
|
||||
#* In tree-view, always accumulate child process resources in the parent process.
|
||||
proc_aggregate = False
|
||||
proc_aggregate = false
|
||||
|
||||
#* Should cpu and memory usage display be preserved for dead processes when paused.
|
||||
keep_dead_proc_usage = false
|
||||
|
||||
#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
|
||||
#* Select from a list of detected attributes from the options menu.
|
||||
@@ -104,25 +110,28 @@ cpu_graph_lower = "Auto"
|
||||
show_gpu_info = "Auto"
|
||||
|
||||
#* Toggles if the lower CPU graph should be inverted.
|
||||
cpu_invert_lower = True
|
||||
cpu_invert_lower = true
|
||||
|
||||
#* Set to True to completely disable the lower CPU graph.
|
||||
cpu_single_graph = False
|
||||
cpu_single_graph = false
|
||||
|
||||
#* Show cpu box at bottom of screen instead of top.
|
||||
cpu_bottom = False
|
||||
cpu_bottom = false
|
||||
|
||||
#* Shows the system uptime in the CPU box.
|
||||
show_uptime = True
|
||||
show_uptime = true
|
||||
|
||||
#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
|
||||
show_cpu_watts = true
|
||||
|
||||
#* Show cpu temperature.
|
||||
check_temp = True
|
||||
check_temp = true
|
||||
|
||||
#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
|
||||
cpu_sensor = "Auto"
|
||||
|
||||
#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
|
||||
show_coretemp = True
|
||||
show_coretemp = true
|
||||
|
||||
#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
|
||||
#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
|
||||
@@ -134,63 +143,66 @@ cpu_core_map = ""
|
||||
temp_scale = "celsius"
|
||||
|
||||
#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
|
||||
base_10_sizes = False
|
||||
base_10_sizes = false
|
||||
|
||||
#* Show CPU frequency.
|
||||
show_cpu_freq = True
|
||||
show_cpu_freq = true
|
||||
|
||||
#* How to calculate CPU frequency, available values: "first", "range", "lowest", "highest" and "average".
|
||||
freq_mode = "first"
|
||||
|
||||
#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
|
||||
#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
|
||||
clock_format = "%X"
|
||||
|
||||
#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
|
||||
background_update = True
|
||||
background_update = true
|
||||
|
||||
#* Custom cpu model name, empty string to disable.
|
||||
custom_cpu_name = ""
|
||||
|
||||
#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
|
||||
#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
|
||||
#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
|
||||
disks_filter = ""
|
||||
|
||||
#* Show graphs instead of meters for memory values.
|
||||
mem_graphs = True
|
||||
mem_graphs = true
|
||||
|
||||
#* Show mem box below net box instead of above.
|
||||
mem_below_net = False
|
||||
mem_below_net = false
|
||||
|
||||
#* Count ZFS ARC in cached and available memory.
|
||||
zfs_arc_cached = True
|
||||
zfs_arc_cached = true
|
||||
|
||||
#* If swap memory should be shown in memory box.
|
||||
show_swap = True
|
||||
show_swap = true
|
||||
|
||||
#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
|
||||
swap_disk = True
|
||||
swap_disk = true
|
||||
|
||||
#* If mem box should be split to also show disks info.
|
||||
show_disks = True
|
||||
show_disks = true
|
||||
|
||||
#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
|
||||
only_physical = True
|
||||
only_physical = true
|
||||
|
||||
#* Read disks list from /etc/fstab. This also disables only_physical.
|
||||
use_fstab = True
|
||||
use_fstab = true
|
||||
|
||||
#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
|
||||
zfs_hide_datasets = False
|
||||
zfs_hide_datasets = false
|
||||
|
||||
#* Set to true to show available disk space for privileged users.
|
||||
disk_free_priv = False
|
||||
disk_free_priv = false
|
||||
|
||||
#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
|
||||
show_io_stat = True
|
||||
show_io_stat = true
|
||||
|
||||
#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
|
||||
io_mode = False
|
||||
io_mode = false
|
||||
|
||||
#* Set to True to show combined read/write io graphs in io mode.
|
||||
io_graph_combined = False
|
||||
io_graph_combined = false
|
||||
|
||||
#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
|
||||
#* Example: "/mnt/media:100 /:20 /boot:1".
|
||||
@@ -202,29 +214,44 @@ net_download = 100
|
||||
net_upload = 100
|
||||
|
||||
#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
|
||||
net_auto = True
|
||||
net_auto = true
|
||||
|
||||
#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
|
||||
net_sync = True
|
||||
net_sync = true
|
||||
|
||||
#* Starts with the Network Interface specified here.
|
||||
net_iface = ""
|
||||
|
||||
#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
|
||||
base_10_bitrate = "Auto"
|
||||
|
||||
#* Show battery stats in top right if battery is present.
|
||||
show_battery = True
|
||||
show_battery = true
|
||||
|
||||
#* Which battery to use if multiple are present. "Auto" for auto detection.
|
||||
selected_battery = "Auto"
|
||||
|
||||
#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
|
||||
#* Show power stats of battery next to charge indicator.
|
||||
show_battery_watts = true
|
||||
|
||||
#* Set loglevel for "~/.local/state/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
|
||||
#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
|
||||
log_level = "WARNING"
|
||||
|
||||
#* Automatically save current settings to config file on exit.
|
||||
save_config_on_exit = true
|
||||
|
||||
#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
|
||||
nvml_measure_pcie_speeds = True
|
||||
nvml_measure_pcie_speeds = true
|
||||
|
||||
#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
|
||||
rsmi_measure_pcie_speeds = true
|
||||
|
||||
#* Horizontally mirror the GPU graph.
|
||||
gpu_mirror_graph = True
|
||||
gpu_mirror_graph = true
|
||||
|
||||
#* Set which GPU vendors to show. Available values are "nvidia amd intel"
|
||||
shown_gpus = "nvidia amd intel"
|
||||
|
||||
#* Custom gpu0 model name, empty string to disable.
|
||||
custom_gpu_name0 = ""
|
||||
@@ -243,4 +270,3 @@ custom_gpu_name4 = ""
|
||||
|
||||
#* Custom gpu5 model name, empty string to disable.
|
||||
custom_gpu_name5 = ""
|
||||
|
||||
|
||||
@@ -32,3 +32,8 @@ bindd = SUPER SHIFT ALT, X, X Post, exec, omarchy-launch-webapp "https://x.com/c
|
||||
# Overwrite existing bindings, like putting Omarchy Menu on Super + Space
|
||||
# unbind = SUPER, SPACE
|
||||
# bindd = SUPER, SPACE, Omarchy menu, exec, omarchy-menu
|
||||
|
||||
# Logitech MX Keys
|
||||
# bind = SUPER SHIFT, S, exec, omarchy-cmd-screenshot # Print Screen Button
|
||||
# bind = SUPER, H, exec, voxtype record toggle # Dictation Button
|
||||
# bind = SUPER, PERIOD, exec, omarchy-launch-walker -m symbols # Emoji Button
|
||||
|
||||
Executable
+10
@@ -0,0 +1,10 @@
|
||||
#!/bin/bash
|
||||
|
||||
# Temporarily switch to performance power profile on resume
|
||||
# to avoid sluggishness while the system catches up, then
|
||||
# drop back to balanced after 10 seconds.
|
||||
|
||||
if [[ $1 == "post" ]]; then
|
||||
powerprofilesctl set performance
|
||||
(sleep 10 && powerprofilesctl set balanced) &
|
||||
fi
|
||||
@@ -23,6 +23,7 @@ run_logged $OMARCHY_INSTALL/config/sudoless-asdcontrol.sh
|
||||
run_logged $OMARCHY_INSTALL/config/input-group.sh
|
||||
run_logged $OMARCHY_INSTALL/config/omarchy-ai-skill.sh
|
||||
run_logged $OMARCHY_INSTALL/config/kernel-modules-hook.sh
|
||||
run_logged $OMARCHY_INSTALL/config/powerprofilesctl-rules.sh
|
||||
run_logged $OMARCHY_INSTALL/config/wifi-powersave-rules.sh
|
||||
run_logged $OMARCHY_INSTALL/config/plocate-ac-only.sh
|
||||
|
||||
@@ -42,6 +43,7 @@ run_logged $OMARCHY_INSTALL/config/hardware/intel/thermald.sh
|
||||
run_logged $OMARCHY_INSTALL/config/hardware/intel/ipu7-camera.sh
|
||||
run_logged $OMARCHY_INSTALL/config/hardware/intel/ptl-kernel.sh
|
||||
run_logged $OMARCHY_INSTALL/config/hardware/intel/fix-wifi7-eht.sh
|
||||
run_logged $OMARCHY_INSTALL/config/hardware/intel/resume-boost.sh
|
||||
|
||||
run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-haptic-touchpad.sh
|
||||
run_logged $OMARCHY_INSTALL/config/hardware/dell/fix-xps-ptl-display.sh
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
# Boost CPU performance for 10 seconds after resume on Panther Lake systems.
|
||||
# The powersave governor with balance_power EPP is slow to ramp frequency
|
||||
# after long suspends, causing noticeable sluggishness on wake.
|
||||
|
||||
if omarchy-hw-intel-ptl; then
|
||||
sudo mkdir -p /usr/lib/systemd/system-sleep
|
||||
sudo install -m 0755 -o root -g root "$OMARCHY_PATH/default/systemd/system-sleep/resume-boost" /usr/lib/systemd/system-sleep/
|
||||
fi
|
||||
+2
-2
@@ -12,8 +12,8 @@ if omarchy-battery-present; then
|
||||
battery_profile="${profiles[1]}"
|
||||
|
||||
cat <<EOF | sudo tee "/etc/udev/rules.d/99-power-profile.rules"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="0", RUN+="/usr/bin/powerprofilesctl set $battery_profile"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="1", RUN+="/usr/bin/powerprofilesctl set $ac_profile"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="0", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-power-profile-battery --property=After=power-profiles-daemon.service /usr/bin/powerprofilesctl set $battery_profile"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="1", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-power-profile-ac --property=After=power-profiles-daemon.service /usr/bin/powerprofilesctl set $ac_profile"
|
||||
EOF
|
||||
|
||||
sudo udevadm control --reload
|
||||
@@ -1,7 +1,7 @@
|
||||
if omarchy-battery-present; then
|
||||
cat <<EOF | sudo tee "/etc/udev/rules.d/99-wifi-powersave.rules"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="0", RUN+="$HOME/.local/share/omarchy/bin/omarchy-wifi-powersave on"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="1", RUN+="$HOME/.local/share/omarchy/bin/omarchy-wifi-powersave off"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="0", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-wifi-powersave-on $HOME/.local/share/omarchy/bin/omarchy-wifi-powersave on"
|
||||
SUBSYSTEM=="power_supply", ATTR{type}=="Mains", ATTR{online}=="1", RUN+="/usr/bin/systemd-run --no-block --collect --unit=omarchy-wifi-powersave-off $HOME/.local/share/omarchy/bin/omarchy-wifi-powersave off"
|
||||
EOF
|
||||
|
||||
sudo udevadm control --reload
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
echo "6Ghz Wi-Fi + Intel graphics acceleration for existing installations"
|
||||
|
||||
bash "$OMARCHY_PATH/install/config/hardware/set-wireless-regdom.sh"
|
||||
bash "$OMARCHY_PATH/install/config/hardware/intel.sh"
|
||||
bash "$OMARCHY_PATH/install/config/hardware/intel/video-acceleration.sh"
|
||||
|
||||
@@ -1,3 +1,3 @@
|
||||
echo "Set power profile based on source switching (AC or Battery)"
|
||||
|
||||
source $OMARCHY_PATH/install/first-run/powerprofilesctl-rules.sh
|
||||
source $OMARCHY_PATH/install/config/powerprofilesctl-rules.sh
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
echo "Install Intel GPU hardware acceleration drivers if missing"
|
||||
|
||||
if lspci | grep -iE 'vga|3d|display' | grep -qi 'intel'; then
|
||||
source "$OMARCHY_PATH/install/config/hardware/intel.sh"
|
||||
source "$OMARCHY_PATH/install/config/hardware/intel/video-acceleration.sh"
|
||||
fi
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
echo "Fix AC power udev rules to use systemd-run"
|
||||
|
||||
source $OMARCHY_PATH/install/config/powerprofilesctl-rules.sh
|
||||
source $OMARCHY_PATH/install/config/wifi-powersave-rules.sh
|
||||
@@ -0,0 +1,17 @@
|
||||
echo "Fix empty resume_offset in hibernation config"
|
||||
|
||||
RESUME_DROP_IN="/etc/limine-entry-tool.d/resume.conf"
|
||||
SWAP_FILE="/swap/swapfile"
|
||||
|
||||
if [[ -f $RESUME_DROP_IN ]] && grep -q 'resume_offset="$' "$RESUME_DROP_IN" && [[ -f $SWAP_FILE ]]; then
|
||||
RESUME_OFFSET=$(sudo btrfs inspect-internal map-swapfile -r "$SWAP_FILE" 2>/dev/null)
|
||||
if [[ -n $RESUME_OFFSET ]]; then
|
||||
sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" "$RESUME_DROP_IN"
|
||||
sudo sed -i "s/resume_offset=\"$/resume_offset=$RESUME_OFFSET\"/" /etc/default/limine
|
||||
sudo limine-mkinitcpio
|
||||
sudo limine-update
|
||||
echo "Fixed: resume_offset=$RESUME_OFFSET"
|
||||
else
|
||||
echo "Warning: Could not determine resume offset for $SWAP_FILE"
|
||||
fi
|
||||
fi
|
||||
Reference in New Issue
Block a user