Previously, right-clicking the audio icon muted only the output. Whereas
the switch at the top of the panel mutes all audio (inputs and outputs).
Pairing the right-click to the switch seems a bit less confusing, and
also matches the behaviour with other panels (e.g. Bluetooth, Tailscale,
etc).
* Label the keyboard widget with the xkb language code
The label was the first word of the layout description cut to three
characters, so a US layout read ENG and a Portuguese one read POR.
xkb already pairs every layout and variant with a short language code,
which is the code GNOME shows in its own indicator. Read that table once
at startup from xkbcli list and key it by description, which is what
hyprctl reports as the active keymap, so the same layouts read EN and PT.
The code is a language rather than a country, so it stays sensible for
the layouts named after neither: Esperanto is EO, Arabic is AR, and Latin
American Spanish is ES. Layouts missing from the table keep the old
truncated description.
* Read the exotic xkb rulesets for the keyboard label
xkbcli list leaves out the exotic rulesets, so layouts like trans were
missing from the table and fell back to the truncated description: the
IPA layout read INT rather than IPA. Those layouts ship in the same
xkeyboard-config package and set just as well, so read them too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the keyboard label to three characters
The brief was used verbatim while the fallback was truncated, but not
every brief is two or three characters: Burmese (Zawgyi) is my-zwg and
Shan (Zawgyi) is shn-zwg. Selecting either widened the widget past its
neighbours on the bar. Drop the script suffix and cap the brief the same
way the fallback is capped, so those read MY and SHN.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop an xkb brief carrying past its own block
The brief was only cleared once a description consumed it, so a block
printing a brief without one would hand its code to the next block's
description and label it wrongly rather than falling back. Nothing in
the current xkb data does that, and the option groups were skipped only
because the last layout happened to consume its brief first. Clear the
brief when a line starts a new block so the pairing is explicit, and
cover the option list the 2-space match is what keeps out.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Fall back when a layout description names a built-in
A custom xkb group called constructor or toString reached an inherited
member of the lookup rather than a brief, and splitting it threw a
TypeError that took the whole label binding down instead of falling back
to the truncated description. Take the lookup only when it returns a
string.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The letters name a panel; the numbers count them. One is the leftmost
panel in the right section, so the number matches the icon a user would
point at: a widget with no panel of its own is passed over, and so is one
that is hiding itself.
Counting rather than naming means the hotkeys follow the bar. Rearranging
the section, or adding a widget to it, renumbers the panels with no
binding to rewrite.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* Show the per-model weekly limit Claude's usage endpoint reports
Model-scoped allowances arrive in the payload's limits array, not in the
seven_day_<model> buckets, which come back null. Read them so a window
like Fable's own weekly limit stops being spent against invisibly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Read every model-scoped window, and title it for what it is
A model can hold more than one scoped window, so keying the dedupe on the
model alone dropped whichever came second — including a fuller one that
decides the headline. The model and the window kind together make the key,
and both make the title, so one model's two rows read apart.
The panel guesses a window out of the label, and that guess cannot survive a
model name: "Opus 5 (1M context)" parses as a one-minute window and renders
as a second "Session". The collector states the title outright now and the
panel takes it, eliding a long one rather than running it into the percentage.
Scoped percentages are read on whatever scale the payload speaks, the way the
flat buckets already are, rather than assuming percentages, and a model that
names only an id still names a window worth showing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Detect a compositor session lock through one helper
omarchy-restart-shell decided whether the session was locked by looking for
"LOCK" anywhere in the hyprctl monitors payload. That works, but not for the
reason the code reads like: Hyprland reports no lock state of its own, and the
string comes from solitaryBlockedBy, the list of reasons a monitor cannot hand
a client the whole screen. An active ext-session-lock is one of those reasons.
A substring match over the whole payload also answers yes to a workspace or a
monitor description that merely spells LOCK, and locking a desktop nobody asked
to lock is the worst way to be wrong. Match the reason list itself, and put it
behind a helper now that a second caller needs the same answer.
That second caller needs a third answer too, because the reason list is not
always readable. Hyprland stops at the first reason on a monitor with no
workspace yet — one just coming back — and returns before it ever looks at the
lock, so a missing LOCK there means nothing was asked rather than nothing was
found. Neither that nor an unreachable compositor is an unlocked session, and
locks strand precisely while outputs are coming and going, so both exit 2.
Callers that only branch on success are unaffected.
The test fixture claimed the string came from a workspace name, so it was
encoding the wrong model of the compositor. It now returns what Hyprland
actually returns.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Retake a session lock stranded by a dead shell
ext-session-lock keeps the session locked when its client goes away — that is
the point of the protocol, so a crashing lock screen cannot expose the desktop.
The cost is that a shell which dies while locked leaves the compositor locked
with nothing left to authenticate against: Hyprland's failsafe, which takes a
TTY or another machine to clear.
Nothing carried the lock across a restart. Quickshell relaunches itself after a
crash and omarchy-restart-shell can be run by hand, but both bring back a shell
holding no lock, so the failsafe stayed up. A fresh shell never holds a lock, so
a session already locked as the lock service starts can only be that orphan:
take it back and let the user type their way out.
Asking once is not enough. These deaths happen while outputs are going away,
and the replacement shell comes up inside that same window, where there is
nothing to read a lock off. So the question is asked until the answer means
something: on a short timer while the session settles, and again when a screen
comes back, since a display asleep for hours outlasts any timer worth running
and returns through a state the compositor cannot answer for either. Once an
answer does arrive the search ends, so the timer stops and later screen changes
cost nothing.
Three ways this could lock a desktop nobody asked to lock, all closed. A lock
this shell took itself is not an orphan, including one taken while the question
was in flight — omarchy-restart-shell re-locks a fresh shell, and the answer
cannot tell whose lock it found. Recovery runs once and clears the flag, so
nothing lingers to fire after an unlock. And PAM landing late reopens the
question rather than answering it: clearing the failsafe from a TTY is the
documented way out, so a yes from before there was anything to do about it may
be stale by the time it can be acted on.
The check has to live here rather than in the launcher. Quickshell's crash
handler re-execs in place, keeping the same pid, so a supervising process never
sees the restarts that recovery matters most for.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Relaunch the shell when it dies without a signal
Quickshell restarts itself after a crash, but only from its signal handlers:
SIGSEGV, SIGABRT, SIGFPE, SIGILL, SIGBUS, SIGTRAP. Qt does not always leave
that way. When the Wayland connection fails, QWaylandDisplay::checkWaylandError
calls _exit() directly, which raises no signal at all — so the crash handler
never runs, no report lands in ~/.cache/quickshell/crashes, and the desktop is
left with no bar and no explanation.
That is how #6684 ends: the lock path meets a screen with no valid Wayland
output, declines to create a lock surface for it, and the connection dies with
EINVAL. Supervise the launcher so those deaths come back.
A clean exit is deliberate — omarchy-restart-shell stops the shell over IPC and
starts its own replacement — and a signal to the supervisor means the session is
going away, so neither relaunches. Neither does a shell that outlived its
compositor, though that takes more than one unanswered query to conclude: the
shell dies while outputs are being reconfigured, which is also when a busy
compositor can miss one without being gone. A shell that cannot stay up gives
up after five tries in a minute rather than spinning.
Signals need care now that a launcher stands between the session and the shell.
Bash defers a trap until a foreground command returns, so the shell runs as a
job and the supervisor waits on it. Stopping the launcher used to stop the shell
with it, back when this script exec'd Quickshell, so the signal is passed on
rather than leaving a desktop nobody is watching. One arriving during the
backoff sleep only reaches the trap afterwards, so the flag is read again at the
top of the loop: a shutdown racing a crash would otherwise get one more
Quickshell on its way out.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* Turn Bluetooth off with an rfkill soft block
BlueZ never persists an adapter's Powered property, so turning Bluetooth off in
the panel lasted only until the next boot. Omarchy's answer was AutoEnable=false,
which persists nothing either — it just means "never power the adapter on", so
Bluetooth came up off every boot whatever the user had chosen.
The soft block already does the job. systemd-rfkill saves every switch under
/var/lib/systemd/rfkill and restores it early on the next boot; that is the
entire purpose of the unit. Blocking also covers every controller at once, where
bluetoothctl only ever addresses the default one.
So the block becomes the state and BlueZ follows it: with AutoEnable back at its
stock default, lifting the block is enough for bluetoothd to power the adapter up
on its own. Powered still tracks the block, so the panel switch and icon read it
exactly as before. Everything that turns Bluetooth on or off goes through
omarchy-bluetooth-power, because bluetoothctl power on fails while a block is set.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Carry installed machines over to the rfkill block
Existing installs have AutoEnable=false, so their adapter is down at every boot
and Powered is the only record of what the user actually wants. Read it before
anything changes, hand it to the block, then put AutoEnable back to its default
so bluetoothd can act on that block. Only the exact line Omarchy wrote is
reverted, so a hand-edited opt-out survives.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Ask the power helper for a direction, not a toggle
The helper runs detached and the switch only moves once BlueZ catches up, so a
second click inside that window re-read the pre-click state and undid the first.
The panel already knows which way it wants to go, so let it say.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Read every controller and bound the power-up wait
The block hits every Bluetooth radio at once, but the state was read from a bare
bluetoothctl show, which reports the default controller only. A powered dongle
sitting behind a powered-down internal controller read as off and got blocked
along with it. Enumerate the controllers and take any powered one as on, exposed
as is-on so callers do not each reinvent the read.
The wait counted probes rather than time, so a wedged D-Bus turned a two-second
bound into roughly fifty across a full power-up. One deadline around the whole
wait holds it near nine.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Change the radio through sudo in the migration
/dev/rfkill is only writable unelevated from an active graphical seat, so an
update run over SSH failed here with EACCES. Migrations run under bash -e, so
that aborted before the config revert and the marker, and aborted again on every
retry. The privilege guidance already calls for sudo on machine-wide work run
from a visible terminal.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Hold the indicator peek open while the pointer is on the bar
Revealing the hidden indicators widens their section, and a section that
grows can slide a neighbouring widget under a pointer that never moved.
Collapsing the peek on that un-hover narrowed the section again, moved the
neighbour back out, and re-opened the peek, so a pointer resting in the bar
space beside a grown section stuttered the bar until it moved away.
Hold the peek while the pointer is anywhere on the bar and close it only
once the pointer has left, which keeps the reveal-on-empty-space gesture
and drops the feedback loop.
Fixes#6581
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Assert the whole-bar hover helper does what the peek depends on
The earlier assertions all held against a no-op setBarHovered, which would
leave barHovered false and let the oscillation straight back in. Pin the
assignment and the collapse re-run too, so the helper cannot be emptied
without the suite noticing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let the delayed peek re-check collapse only, never open
The timer assigned centerSectionRevealHeld outright, so it opened the peek
from bar hover alone. A pointer resting on the left section that dipped off
the bar and returned inside 120ms left the timer pending with barHovered
true again, and the indicators revealed without the pointer ever touching
the center section.
Opening stays the center section's own gesture in setCenterSectionHovered.
The timer now only closes what that opened, and the test asserts the
invariant against the whole file rather than one helper body that never
had the offending assignment in it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Tally bar hover per monitor instead of sharing one flag
Every screen's bar wrote the same barHovered bool, last writer wins. Sliding
along the top edge from one monitor's bar to the next can deliver the enter
before the leave, leaving the flag false under a live pointer; the collapse
then fired on a peek the user was still hovering, and no further hover change
arrived to correct it until the pointer left and came back.
Counting each surface's hover makes the order irrelevant. A bar destroyed
mid-hover — unplugging a monitor — never sends a leave, so it hands its
tally back on destruction rather than holding the peek open for good.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Keep the bar mapped while hidden so revealing it is instant
Hiding the bar set the panel invisible, which unmaps the layer surface and
releases the scene graph with it. Every reveal then had to rebuild all of
it: a new layer surface, a configure roundtrip, re-shaped glyphs and
re-uploaded textures, and a first frame before anything appeared.
Measured on a 2560x1440 screen, showing took 155-175ms against 20ms to
hide, and 400-595ms on the first reveal after a cold start. Splitting the
cost showed the exclusive-zone reflow was not to blame: show latency was
the same on an empty workspace as on a tiled one, and windows finished
moving ~15ms after the bar was already on screen.
Park the bar one bar-width past its anchored edge instead, and drop its
exclusion zone while hidden. The surface stays alive, so showing is only
a margin change: 10-14ms in both directions, at every bar position.
Since a hidden bar is now mapped, layer_present no longer proves the bar
is visible; the session acceptance test asserts on-screen geometry.
* Fix layer visibility checks on offset monitors
* Handle rotated outputs in layer visibility checks
* Cover hidden bar behavior in acceptance tests
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Hide the keyboard layout widget on a single-layout install
There is nothing to read or switch when only one layout is configured, so the
label is noise on the bar most people have. Hide it until the keyboard reports
more than one, and keep showing it on a Hyprland that doesn't report the list
at all rather than hiding the widget everywhere.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put the keyboard layout widget on the bar by default
The widget hides itself unless the active keyboard has more than one layout,
so shipping it costs a single-layout machine nothing and saves everyone else
from finding it in the plugin list. Sit it just right of the clock, and add it
to existing bars the way the agents widget was added, leaving a curated bar
and a disabled widget alone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Cycle the layout with the hyprctl command that exists
switchxkblayout is a hyprctl command, not a dispatcher, so sending it over the
dispatch socket only produced a Lua syntax error and clicking the widget did
nothing. Run it instead, against the keyboard the label was read from.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add an idempotent bar add command
Nothing put a widget on the bar without going through the running shell:
plugin enable and bar move both forward to it over IPC, which a migration
cannot rely on. Add writes the config file the way position and transparent
already do, and leaves a widget that is already on the bar where the user put
it, so callers can ask for it repeatedly.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put the keyboard layout widget on bars through the bar CLI
The hand-written jq was a normalizer, a presence check and a splice for what
is now one command that carries all three.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep bar add from writing a bar the shell was not reading
The shell takes a user shell.json only when it parses, says version 1, and
carries a bar layout, and does not deep-merge; anything else leaves the
shipped defaults on screen. Reading and writing the user file regardless
turned a config holding nothing but an idle timeout into a bar holding
nothing but the new widget, and made an unparsable one abort the migration
chain on every update. Work against whichever layout is actually in effect,
seeding the defaults before placing a widget they do not already carry.
A malformed hand-installed manifest fails the whole plugin catalog, which was
enough to refuse a first-party widget, so treat an unreadable catalog as no
answer rather than a no. Leave a widget listed in disabledPlugins off the bar
instead of writing a layout entry the registry refuses to load, and re-check
presence inside the mutation so two adds cannot both miss it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Read a widget's default bar section in one place
cmd_defaults spelled out the same "defaultSection, or center when it is
missing or not a section" rule that the add path already asks for by name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Rename bar add to bar put
'omarchy plugin add' installs a plugin and 'omarchy bar add' placed one that
was already installed, which is too much meaning for one verb.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Place a newly added bar widget with bar put
plugin add reached the bar through plugin enable, which forwards to the
running shell, so it first had to poll until the shell noticed the clone and
then failed outright when no shell was there to ask. Putting a widget on the
bar is a config edit, so do that directly and leave plugin enable to the
plugins that need registering rather than placing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Put bar widgets through the shell instead of the config file
Placing a widget existed twice: once in PluginRegistry, which the shell uses
and owns the config it holds in memory, and once as jq against shell.json.
The second was there so migrations could run without a shell, which they do
not need to: the Quattro upgrade hands over the shipped shell.json before it
runs any, and every other path runs inside a session with a shell up. Ask the
shell, and say so and carry on when there is none to ask.
putBarWidget enables only what is not already on the bar, which is what a
caller that cannot know whether it ran before needs, and is the one thing the
existing enable path would not do.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Fix hyprctl output parsing in KeyboardLayout plugin
* Never fall back to a non-active keyboard for the layout label
find(k => k.main) returning nothing fell through to keyboards[0], which is
the case the fix is for: on hardware whose first device is a permanently
English (US) radio-control keyboard, the label was wrong and the 10s poll
kept it wrong. The seat can also hold no active keyboard while a device is
re-added, and older Hyprland has no main field at all. Keep the last known
value instead, and skip entries without an active_keymap, since assigning
undefined to the string property throws before the label is ever set.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Run hyprctl directly from the keyboard layout widget
The shell wrapper only existed for a pipeline that is gone, so spawn the
command directly, as Style.qml already does for its own hyprctl query.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Read the layout from the keyboard the user types on
Every Omarchy install runs fcitx5 for ~/.XCompose, and it binds a virtual
keyboard that takes the seat's main flag whenever it injects. That keyboard
keeps the us layout the input method gave it, so on a machine configured for
another layout the widget flipped to ENG and the poll kept it there until the
next physical keypress. Skip virtual keyboards and hold the last known layout
instead, which the next poll corrects once a real keyboard is active again.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep tracking the keyboard the layout was last read from
Holding a frozen label while fcitx5 owns the main flag went stale as soon as
the layout changed underneath it, and cycling still dispatched against
"current", which is that same virtual keyboard. Remember the keyboard the
label came from, re-read its layout on every poll, and cycle it by name so
the widget shows and switches one device.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every keystroke in the search box scanned, lowercased, and split the
full text of every history entry, and the preview pane laid out the
entire selection with WrapAnywhere. A single 1.6MB paste (or a large
file selection) turned that into hundreds of megabytes of work on the
shell thread and stalled the render thread — freezing the whole
desktop.
Cap each entry once as it enters the display, so searching, previewing,
and rendering all work on a bounded prefix. Pasting reads the full entry
back from history by index, so nothing is actually lost. The cut lands
on a line break, keeping a file:// URI from truncating into a bogus path.
Co-authored-by: markbusking <marcosbustos.dev@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep clicking a notification working after a shell restart
Notification actions lived only in the sending process: `-a` appended
`-A default=default`, so notify-send blocked on a D-Bus ActionInvoked signal and
the caller ran the command when it arrived. Nothing about that reached disk, so a
restored popup had no action to run and its sender stayed blocked forever.
Replace `-a` with `--exec <command>`, carried as an `omarchy-exec` hint into the
snapshot's `exec` role. It travels through the popup files and history, and the
shell runs it on click, so restored toasts behave exactly like live ones and the
sender exits immediately.
That drops the scaffolding whose only job was keeping a blocked sender alive: the
first-run invitations lose their `--show` re-entry and two transient units each,
omarchy-migrate-notify loses its transient service, and the screenshot,
recording, download, and taildrop toasts lose their wrapper subshells.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep a failed toast from failing the work it announces
Moving these sends out of their backgrounded subshells put a fallible command
on the foreground path, where the `&` used to swallow its exit status. A
notification outage — including the shell restart this branch targets — now
propagates:
- taildrop's receiver dies under `set -e` mid-delivery
- omarchy-capture-screenshot reports failure for a screenshot it already saved
- a completed download exits before scheduling its thumbnail cleanup, leaking
the mktemp file
Announcing is best-effort in all three: the work is already done by the time
the toast goes out.
Also drop the first-run sleep that spaced out the welcome and Wi-Fi toasts.
It compensated for the background notify-send processes this branch removes;
each send now returns only once the server has taken the toast, so sending in
order is enough to stack them newest-on-top.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop tying the preview cleanup to the toast's expiry
The shell loads a notification thumbnail into memory when the toast appears and
never re-reads the file, so the preview only has to outlive that load. Deriving
the cleanup delay from the expiry was false precision, and it turned -t into a
variable for no reason: -t is already the helper's expiry setting.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Without defaultSection, both 'omarchy bar defaults' and 'omarchy plugin
add' fall back to center, so upgrades landed Tailscale next to the clock
instead of alongside the other status widgets.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add a Fireworks balance collector and teach the agents panel prepaid ledgers
The omarchy-agent-usage-fireworks collector reads serverless token usage
from the Fireworks billing API, grouped by day and model for the last 30
days, and reshapes it into the shared record contract. Fireworks does not
expose its prepaid ledger through the documented API, so the record carries
an estimated balance instead of rate limits: credits configured in
~/.config/omarchy/agents/fireworks.json minus rated account costs since the
funding date. Credentials come from FIREWORKS_API_KEY/FIREWORKS_ACCOUNT_ID,
the auth.ini that firectl set-api-key writes, or — last, so an explicit
login wins — the key opencode stores for its fireworks-ai provider.
The panel gains two generic capabilities any agent record can use: a
balance object draws a BALANCE section — remaining credit, a fuel-gauge
meter that drains toward empty and lights the bar alarm below 10%, and
funded-versus-spent detail — and hasPromptStats: false keeps prompt and
session counts out of today's tooltip for agents whose billing API only
ever reports tokens, on this machine and through synced snapshots.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Feed Claude and Codex usage from pi, omp, and opencode sessions
A subscription burned entirely through another coding agent leaves no
native Claude Code transcripts and no Codex session files, so the panel
showed nothing for it. pi and omp write compatible JSONL sessions, and
opencode records per-message provider, model, and token usage in its
message database; the claude and codex collectors now scan all three —
filtered to Anthropic and OpenAI providers respectively — and merge those
numbers into their local stats. Fireworks stays out on purpose: its billing
API already sees that traffic server-side, and a local scan would count the
same tokens twice.
The collector tests pin XDG_DATA_HOME so a developer's real opencode
history cannot leak into fixture runs.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
A bar surface is built per monitor, so panel routing had several live copies
of the same widget to choose from and took whichever registered its slot
first. Pick the one on the monitor Hyprland has focused instead, preferring
an already-open copy so hide and toggle still reach the visible panel.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Extract the speed test gauge cluster into a shared SpeedTestOverlay
The dial cluster -- scrim, ignition sweep, self-ranging dials, run-again
button -- moves from the network speed test panel into qs.Ui with the
labels, unit, title, scale stops, and layer namespace as parameters, so
other measurements can wear the same cluster. The network panel keeps
its process handling and becomes a thin dressing of the overlay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add a disk speed test and move speed tests under Trigger > Tests
omarchy-disk-speedtest streams live write and read MB/s once a second by
sampling the backing block device's kernel I/O counters while dd workers
generate the traffic, the same way the network test samples the
interface counters. The stress data is an incompressible urandom chunk
staged in RAM, written with fdatasync per pass and fadvise drop-behind:
O_DIRECT silently falls back to the page cache on btrfs, and zeros never
reach a compressed filesystem at all. Scratch files are created
exclusively per invocation and removed even when a dismissal interrupts
the run mid-phase.
The omarchy.disk-speedtest panel dresses the shared SpeedTestOverlay
with write and read dials in MB/s, titled with the hardware model of
the disk under test.
The menu grows a Trigger > Tests submenu holding the new Disk Speed
Test and the Network Speed Test, which moves there from Setup > Network.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make the disk speed test reproducible, direct, and read-first
Successive runs could swing 40% because the settled figure was just the
last one-second sample of a single buffered dd stream, taken while btrfs
copy-on-write churned the extent allocator on every rewrite pass and the
fadvise cache-eviction dance stayed advisory.
The test files are now marked NOCOW, which is what makes O_DIRECT truly
direct on btrfs -- with checksums on it silently falls back to the page
cache -- and lets every rewrite land in place. Four parallel workers per
phase give the device a queue depth it can stretch out on, and the
figure the dial settles on is the steady-state average over the whole
phase with the first warm-up second excluded, not whatever rate the
final second happened to catch. Together this tightens successive runs
from +/-40% to a few percent of each other, at the device's actual
spec throughput.
The read phase now runs first, staged against freshly written files,
with the read dial on the left. Workers also only loop while the main
script lives, so a dismissal that loses the kill race can no longer
leave an orphan hammering the disk forever, and any worker dying before
the deadline fails the run instead of passing off partial figures.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the menu aliases from the speed test entries
Aliases are reserved for established alternate names users already
type, kept for compatibility -- not something new entries pick up by
default. Note that in the menu definition header and AGENTS.md so the
next entry doesn't repeat it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Group dial readouts with thousands separators
A gen5 disk reads five digits; 11,450 scans, 11450 doesn't. Uses the
locale's grouping separator.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Trim redundant overlay props and unused imports from the speed test panels
The network panel restated the overlay's default unit and scale stops,
and both panels carried imports and an omarchyPath property nothing
uses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Publish the specific speed test error whichever handler fires last
Process exit and stderr stream-finished have no guaranteed order, so a
failure that beat the collector showed the generic message forever even
when the command emitted an actionable one; the collector now replaces
it once the text lands. Also stop clearing the error on every stdout
line: only a new run should do that, or buffered output delivered after
a failed exit erases the failure message.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Arm the disk speed test cleanup before any scratch file exists
A preflight failure -- tmpfs target, missing device statistics, not
enough free space -- exited between mktemp and the trap, leaking the
scratch files. Cleanup also now unlinks before stopping the workers and
sweeps once more after, so even a cleanup cut short by an impatient
SIGKILL leaves no names behind and a final worker pass cannot recreate
one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix(network): drop the redundant rescan on the bar click
Opening from the bar ran open() and then a bare refresh(). open() already
triggers onOpenedChanged -> refresh(true), which defers the PHY scan by
disabling the scanner and re-enabling it from scanRestart. The bare
refresh() that followed defaults scanWifi to false, so it took the other
branch and set wifiDevice.scannerEnabled synchronously on the click frame,
undoing the deferral and stalling the open on NetworkManager's access-point
flood. It also double-started the DNS and band probes.
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(network): keep wifi rows QObject-free to prevent a delegate crash
wifiRow() embedded the WifiNetwork QObject in the row it returns, and those
rows are list-model data, so every delegate held a live QObject wrapper in a
var property. When NetworkManager churns the list -- a scan's access-point
flood, an AP disappearing -- the object can be destroyed while a delegate is
still incubating, and quickshell segfaults in QObjectWrapper::wrap_slowPath
on the dangling wrapper.
Project primitives only and resolve the backend object at action time via
the existing networkForSsid(). Both failNetworkAction() and
checkActionCompletion() already no-op on a null network, so a row whose
network has since vanished is handled the same way it was before.
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(bluetooth): keep device rows QObject-free to prevent a delegate crash
Same crash class as the wifi rows: scrollRows embedded the BlueZ Device
QObject in list-model data, so every delegate held a live wrapper in a var
property. Discovery churn -- a scan timeout dropping a device, an unpair --
can destroy the object while a delegate is still incubating, and quickshell
segfaults on the dangling wrapper.
Project primitives for both the scroll rows and the connected rows, and
resolve the backend object by address in deviceFor() for the click actions.
The keyboard flow already went through deviceAt(), which reads the live
device arrays directly rather than model data, so it is untouched.
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(network): guard row disconnects against a vanished network
Row activation resolved the WifiNetwork with networkForSsid() and passed the
result straight to disconnect(), which falls back to connectedWifiNetwork
when handed null. A row is a primitive snapshot, so scan churn can remove its
backing object while the row is still on screen -- activating it then tore
down whatever happened to be connected at that moment rather than doing
nothing.
Route both row paths through disconnectRow(), which resolves first and only
acts when the row still maps to a live network. disconnect() keeps its
fallback for callers that mean "drop the current connection".
Also covers the bar-click open path, which had no regression: the suite
already asserts against Panel.qml source, so assert the closed branch calls
open() alone and never a second refresh().
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: shrijit <shrijitsrivastav@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix: reopen wifi passphrase prompt after a wrong saved password
A failed first connection attempt leaves the network profile saved, so the
network shows up as known. Clicking it again reconnects with the stored
wrong PSK and fails with WifiAuthTimeout, but the inline passphrase prompt
only reopened on NoSecrets, leaving no way to re-enter the password short
of forgetting the network.
Treat an auth timeout on a protected network as a wrong saved passphrase
and reopen the prompt; connectWithPsk overwrites the stored PSK on submit.
Fixes#6582
* Scope the wifi passphrase reprompt to panel-initiated connects
Background auto-connect retries also fire connectionFailed; without a
gate they would pop the passphrase prompt open unbidden, stealing focus
and wiping a passphrase mid-entry when another network fails.
For the gate to see the failure, the action safety-net timer must
outlast NetworkManager's 25s supplicant timeout -- at 15s it cleared the
action state before WifiAuthTimeout arrived, so a wrong saved password
showed "Timed out connecting" instead of "Wrong password". Bump it to
30s.
Also share the one ConnectionFailReason map between the Model.js
helpers instead of building a second partial copy inline.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The panel resolves marks by walking assets/<id>-light.svg then
assets/<id>.svg, advancing on Image.Error. But the candidates binding is
re-evaluated whenever the provider objects are rebuilt, and a fresh array
identity with identical content reset the walk to the -light candidate.
Re-pointing source at a URL whose load already failed emits no
statusChanged, so the walker never advanced again and agents that ship a
single mark — Claude — fell back to the generic bar glyph on light
surfaces.
Key the reset on the candidate URLs instead of the array identity, and
defer the error advance one tick so stepping source from inside its own
status change doesn't trip the binding-loop detector.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add agent usage collectors that write display-ready data files
One omarchy-agent-usage-scan-<agent> collector per AI coding agent prints a
complete display-ready usage record — identity, tier, status, rate limits,
and today/week/all-time stats. omarchy-agent-usage-update runs every
collector it finds and writes the records atomically to
~/.local/state/omarchy/agents/usage/, so anything that displays usage only
ever reads JSON from there.
The Claude collector absorbs what the shell previously did in-process:
transcript scanning, the stats-cache/history fallback, credentials parsing,
and the OAuth limits probe, now with a probe throttle and last-good limits
kept across network failures. The Codex collector is the existing scanner
reshaped to the shared record contract.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Redo the model-usage plugin as omarchy.agents watching usage data files
The panel is now strictly a display. It discovers the JSON records that
omarchy-agent-usage-update maintains under
~/.local/state/omarchy/agents/usage/, watches them for changes, and draws
whatever appears — so adding an agent means shipping a collector, never
touching the panel. Marks resolve by convention (assets/<id>.svg with an
optional -light twin), the limits meters read a generic limits array, and
the per-provider QML adapters and in-plugin scanner scripts are gone.
Cross-device sync aggregation stays in the shell and keeps the snapshot
field names older versions wrote, so mixed-version fleets still merge in
both directions.
With the provider fan-out gone, the widget takes its real name: the plugin
id becomes omarchy.agents. A migration renames it wherever a user's config
mentions it — layout entries keep their settings and position, a disabled
widget stays disabled — then primes the data files once and drops the old
scanner cache. The migration test also drops a stale assertion that expected
migrations to restart the shell themselves, which c992cdff moved to
omarchy update.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Address Codex review: synced-only tabs, limits retry, history fallback
Three data-availability gaps from review. An agent whose records only exist
in synced snapshots — a collector installed on just one machine — now gets
its tab by unioning the synced aggregate into the provider list, with rate
limits blank since those never travel. A Claude limits probe that reaches no
server at all writes retryAdvised into its record, and the shell honors it
with one 30-second retry instead of waiting out the full refresh interval,
restoring the old boot-before-DHCP behavior. And a machine with only
history.jsonl — no transcripts, no stats-cache — still reports today's
prompt and session counts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Address second Codex pass: history-only visibility, targeted retries
Today's prompt and session counts now count toward an agent's presence in
the bar, so a machine whose only Claude source is history.jsonl shows up
without waiting for limits. And the 30-second limits retry passes the
advising agent ids to the updater, so an outage at one provider no longer
puts every other collector on a retry treadmill.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop omarchy-cmd-present jq guards from the agents migrations
jq ships in the default package set, which makes it a runtime invariant per
AGENTS.md — call it directly. The migration tests lose their now-unused
omarchy-cmd-present stubs with it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the scan infix from the collector command names
Collectors are omarchy-agent-usage-<agent>; the updater skips its own name
when globbing them, and the update test proves it with a decoy.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep the credential store out of the printed usage record
The Claude collector now reads .credentials.json once into three scalars —
the access token, its expiry, and the plan label — instead of passing the
parsed store around. The token reaches nothing but the Authorization header
of the limits probe, and only the plan label may travel into the record,
which is what CodeQL's clear-text-logging alert on the record print was
unable to see when the whole dict flowed through.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Persist on-screen notification popups across shell restarts
Mirror every popup to its own file under
~/.local/state/omarchy/notifications/ for exactly as long as it is on
screen: written when the toast appears, deleted when it expires, is
dismissed, is acted upon, or is replaced via freedesktop replaces_id.
On startup the directory is read back and still-valid popups re-shown,
so toasts survive the restart omarchy-update performs — critical
alerts, which never expire, always make it across.
Restored popups keep ids from the previous server generation, so the
replaces_id cleanup tracks them separately instead of mistaking a
fresh notification's reused id for a replacement, and the startup
restore only discards a persisted file when a live row with a
different timestamp has superseded it. Files are read back with awk
so a torn write can't glue itself onto the next file and take a valid
popup down with it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Close the remaining cross-generation id collisions in popup persistence
Notification ids restart from 1 with every server process, so an id
alone never identifies a notification across a shell restart. The
first round of fixes guarded row removal, but review (and a live
repro) showed the same collision biting everywhere else an id was
used on its own:
- Dismissing or clicking a restored toast resolved liveRefs by id and
could dismiss, or fire the action of, an unrelated fresh
notification, and archive its pending row. Restored rows now never
resolve to a live object, and pending rows are matched by id plus
timestamp.
- parsePopupFiles deduped files by id, so a fresh notification reusing
a restored critical alert's id got that alert's file deleted as a
"stale duplicate" on the next restore. Files are never deduped now:
each one is a popup that was on screen, and the rare genuine
leftover from a crash re-shows once and cleans itself up.
- The restore only skips an entry when a live row matches both id and
timestamp (it is that entry); an id-only match shows both toasts
rather than guessing which one to drop.
- A same-millisecond replaces_id update shares its predecessor's
filename; the replacement's file is no longer deleted alongside the
replaced row.
- A restored popup's reset lifetime is persisted as an absolute
deadline, so a second restart judges it by the clock that actually
governs its display instead of dropping it while still on screen.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Evaluate menu guards one run at a time
A second evaluation starting while one was in flight could not replace it.
Process ignores a command change until the next run and `running = true` is
a no-op while running, so setting them did nothing -- but clearing
`collected` first threw away the lines the running script had already
emitted. Its tail then landed as the entire result, and every id missing
from it went back to showing, since `when:` only hides a row on an explicit
false. That is how Setup > Defaults > Browser ends up listing browsers that
are not installed.
Queue the evaluation instead and run it once the one in flight lands, the
way provider enumeration already waits its turn.
* Answer repeated menu guard questions once per evaluation
The menu opens on the last evaluation's answers, so however long the guard
batch takes is how long a row can contradict the state it describes: stop a
recording and Screenrecord still offers to stop it, because the `pgrep` that
would hide it is queued behind fifty package lookups.
Almost none of that time is the questions, it is asking them one process at
a time. The shipped menu runs `omarchy-pkg-present` 54 times and
`omarchy-cmd-present` 23, and reads `omarchy-default-browser` once per row
in Defaults > Browser. Prepend a prelude that answers all of it inside the
one guard process, off a single package listing, bash's own PATH lookup, and
one capture per reader command. The captures are eager because `checked:`
reads them inside `$()`, where a lazy memo would not outlive the subshell.
Takes the shipped batch from 1.49s to 0.25s with identical answers for all
175 guards.
* Make the guard prelude answer exactly as the commands it stands in for
The prelude only helps if it is indistinguishable from the commands it
shadows, and it was not:
- `pacman -Q` resolves a name through what installed packages provide, so
with gvim installed it reports `vim` as present. A set built from
`pacman -Qq` sees only names, so `install.editor.vim` came back and
offered to install what was already there. Build the set from provides
too, and send version constraints, which no set can answer, to pacman.
- `omarchy-cmd-present` uses `command -v`, which finds builtins; `type -P`
searches PATH alone and disagreed on every one of them.
- Shadowing a reader with a function caught far more than the plain
`$(reader)` the rows use: `command -v omarchy-dns` got the function name,
and `VAR=x omarchy-channel-current` got an answer captured without the
variable. Substitute the captured value into the expression instead and
leave every other form to run the real command.
- A reader that exits nonzero could take the batch down under a login shell
with errexit set.
Also keep the results of a batch that was killed rather than finished, since
a row whose `when:` went unanswered shows, which is the failure this set of
changes exists to remove.
Costs 0.25s -> 0.33s against 1.49s before any of this, still with answers
identical to evaluating each guard on its own.
* Read every provide pacman reports, wrapped or not
`pacman -Qi` wraps a long list onto indented continuation lines whenever
COLUMNS is set in the environment, which the login shell the batch runs
under may well have done. Reading only the line that starts with `Provides`
dropped the rest: at COLUMNS=80 that is 537 of 856 provides on this machine,
which puts back exactly the "offers to install what is already there"
failure the provides lookup was added to prevent. Follow the continuation
lines instead.
The version-constraint case was also not testing what it claimed.
Interpolating the argument into the shadow's script text let `bash>=1` parse
as a redirection, so the shadow was handed `bash` and quietly agreed for the
wrong reason -- and left an `=1` file behind, which got committed. Pass
arguments as argv to both sides, drop the file, and wrap gvim's provides in
the stub so the parser is held to the format pacman actually emits.
* Extract the Wi-Fi QR share card into its own omarchy.wifiqr panel plugin
omarchy-network-qr now leads with an iface/security/ssid meta line, so a
bare summon self-detects the connection and the plugin owns the whole
share flow. The network panel loses its overlay lifecycle: with no
centered card left inside it, the shadowed open/close collapses back to
the stock panel behavior, and the QR button just summons the plugin --
which a clone or third-party plugin can replace, like the speed test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep canceled QR and password runs from leaking into their replacements
Copilot review: the cancellation guards dropped in onExited while the
canceled run's collectors were still allowed to fire, so a stale stderr
could shadow a successful regeneration and a stale password could be
revealed under a new network's card. The guards now stay up until the
next run launches, good output settles any earlier error, and a bare
re-summon no longer inherits the previous card's SSID.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Select-menu options gain an optional third field rendered under the
label, filtered alongside it, and returned with the selection. The
plugin picker uses it to show every plugin's id and act on the id the
selection hands back, replacing the duplicate-name label suffix.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The network panel now summons it, so a clone or a third-party plugin
declaring clonedFrom: omarchy.speedtest can replace the whole speed
test -- dials and run orchestration alike -- for every caller.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An installed app whose .desktop Keywords contain a menu id captured the
route: htop ships Keywords=system;..., so SUPER+ESCAPE opened an empty
"Htop" menu instead of the System menu once the Apps menu had merged its
rows. Exact ids now win, and app rows are no longer routable at all —
their keywords remain search-only.
Fixes#6554
Reported-by: Craig Derington (https://github.com/craigderington)
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The first submenu move or search keystroke already froze the card's top
edge; freeze the rows height at the same moment so drilling into a longer
menu scrolls behind the fold instead of growing the card.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(network): pin overlay text to a fixed on-scrim palette
SpeedTestPanel and WifiQrPanel both draw over a hardcoded near-black
scrim, but their text/tick colors came from bar.foreground -- a color
themed to contrast with the *bar's* own background, which flips
dark/light per theme. On themes with a dark bar.foreground, digits
and labels went invisible against the black scrim, leaving only the
accent-colored arc/needle (Color.accent) visible.
Add a fixed white-based on-scrim palette (onScrim/onScrimDim) to both
overlays and route all text/tick colors through it, independent of
theme. bar.urgent stays theme-driven since it's a semantic color
already legible on near-black.
* Trim the on-scrim palette comments to the constraint
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pin overlay error text to a fixed on-scrim urgent color
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Hyprland leaves an already-mapped layer surface at its old global
position when its monitor moves within the layout: undocking disables
the internal panel, the external monitor shifts to x=0, and the bar and
background keep rendering at the old offset until unmapped and remapped.
Watch each screen's origin and briefly unmap the window when it moves so
the compositor re-places the surface at the monitor's new origin.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Every preset in the right-click ring was 24-hour, so a 12-hour label was
something you had to hand-write into shell.json. Pair each locale-shaped
time preset with its AM/PM twin, and give vertical bars one stacked
variant. The ISO preset keeps its 24-hour clock, since ISO 8601 writes
time that way.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Open-Meteo fetch is the only thing that updates the bar icon when a
location is configured, but a failed response was dropped silently with
no retry, leaving a stale icon until the next refresh tick. Give it the
same short retry loop the wttr fetch already has, and reset both retry
budgets on each full refresh cycle so an exhausted round (e.g. waking
before the network is back) doesn't starve retries for the session.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make omarchy-network-qr detect the connected Wi-Fi interface
The interface argument is now optional so IPC and menu callers can
summon the QR card without knowing the device name.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test into a modal card with cluster dials
The network panel's Run button and the new omarchy.network speedTest
IPC route open a centered card where download and upload dials sweep
on open and track the live readings, Tucson style. Dismissing the card
stops the traffic workers. The QR card gains a showQr IPC route.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add Setup > Network menu with DNS, QR Code, and Speed Test
DNS switches providers through omarchy-dns with the current choice
checked. QR Code only shows while connected over Wi-Fi.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Hold the speed test card steady and add a corner dismiss
The Run Again button now fades instead of unmounting so the card keeps
its size across runs, and a small X in the corner closes the card
alongside Esc and the scrim.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test action into the network panel hero
A speedometer icon beside the QR share replaces the dedicated inline
section, and the keyboard chain loses its speed stop accordingly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the speed test cluster on the scrim
Drop the bordered card and the pulsing halo: like the Tucson's floating
cluster, the dials now sit directly on a near-black scrim with a soft
under-glow along the value arc, fainter ticks, and hubless needles that
fade toward the pivot.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Center the retry button between the dials
The measuring status lines and the corner dismiss go away; the retry
button moves into the gap between the two dials like a cluster's center
display, anchored out of the column flow so nothing ever shifts. The
fast.com attribution lives on as its tooltip, and only errors still
print below the cluster.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Put the retry button back beneath the dial pair
The dials close ranks again and the retry button returns below them,
centered on the pair and still fading in place so nothing shifts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Harden the network IPC routes against stale panel state
The QR menu route forces interface self-detection instead of trusting
details that stop refreshing while the panel is closed, and the
widget's canonical close now tears down the centered cards and their
traffic instead of only hiding the compact panel.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Re-range the speed dials for every run
The scale latched upward forever, so one unusually fast run would
compress every later one for the lifetime of the shell process. Each
dial now returns to the base scale when its measurement starts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the Wi-Fi QR share like the speed test
Same presentation as the dials: no bordered card, just the code on a
heavy scrim. Only the dark modules paint now, so the white canvas can
round its corners while the spec quiet zone keeps the code clear.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pick the default-route device and pin the locale in QR detection
nmcli localizes state names, so the detection fallback pins LC_ALL=C
and accepts states like "connected (externally)". Detection now prefers
the default-route device, matching the connection the panel and the
menu's visibility gate describe when several Wi-Fi adapters are up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make every network summon path overlay-aware
Opening the widget while a centered card is up now dismisses the card
instead of raising the compact panel behind an exclusive overlay --
the shadowed open() covers the keybind toggle, the bar icon, and IPC.
Re-summoning a card while its process is still tearing down queues the
fresh request for onExited instead of dropping it, and the speed test
route refreshes connection details like the QR route does.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Shrink the overlays to fit narrow outputs
The dial cluster and the QR card scale down instead of clipping when a
portrait or heavily scaled display is narrower than their natural size.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Every toggle you could only reach by mouse or panel hotkey is now
scriptable through omarchy-shell:
- omarchy.bluetooth toggleBluetooth — the radio (was right-click / B)
- omarchy.network toggleNetwork — Wi-Fi on/off (was W in the panel)
- omarchy.tailscale toggleTailscale — the connection as one call,
matching the widget's right-click, instead of separate up/down
- omarchy.clock toggleWeekStart — calendar week start (was W)
- shell toggleBarTransparency — the bar background (was manage UI only)
Bluetooth and network follow the power/monitor pattern: manageIpc: false
so the panel owns the target's single IpcHandler and can extend it past
the inherited lifecycle methods.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
omarchy-shell omarchy.power togglePercentage now flips the same setting
the widget's right-click does. Follows the monitor/tailscale pattern:
manageIpc: false so the panel owns the target's single IpcHandler and
can extend it past the inherited lifecycle methods.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The widget declared no indicator hint, so the mark fell back to 55% of
the slot — sized for a lone icon, too short once the percentage doubles
the block. Hint the glyph's painted width, the way the clock hints its
label width.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A shell.json write used to reassign the whole layout, and the module
Repeaters recreate every delegate when their array model changes — so
toggling an inline widget setting (battery percentage, clock format,
tray pinning) tore down and rebuilt every widget on every monitor,
closing any open panel along the way. When the layout structure is
unchanged, hand the new settings to the running widgets instead.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Support external monitor brightness
Route brightness through the focused Hyprland monitor so internal panels keep using the kernel backlight while compatible external displays use DDC/CI. Preserve the Apple Display backend and leave brightness unavailable when the focused display cannot be controlled.
Add cached DDC bus and VCP range handling, install ddcutil for new and existing systems, and cover backend selection and brightness conversion with shell tests.
* Harden external brightness caching
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Dismiss bar panels when clicking on another monitor
* Preserve keyboard focus for reopened panels
* Harden cross-monitor panel dismissal
* Wait for panel mapping before releasing focus
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Menus used to cut off clean at ten rows, so anything below the fold was
undiscoverable. Now the list sizes to what fits within 60% of the screen
and always ends mid-row when items overflow, with scroll-position-driven
fades at both edges. Keyboard navigation keeps the next hidden row peeking
past the cursor so the fold affordance travels with the selection.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add Wi-Fi QR sharing to network panel
* Refine Wi-Fi QR sharing
* Use QR glyph for Wi-Fi sharing
* Add click-to-reveal password to the Wi-Fi share card
Scanning the QR is the fast path, but the person typing on a laptop needs
the actual password. A dimmed "Show password" hint under the QR toggles
the secret in place.
The password stays out of the shell until asked for: a click runs the new
omarchy-network-password helper (a private pipe, never an argument), and
closing the card drops it again. Open and enterprise networks never show
the control.
The card loses its Close button -- Escape and clicking outside already
cover it -- and now sizes itself to its content.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep a dismissed Wi-Fi share card closed and make Escape reliable
Closing the card mid-generation killed the helper, but its buffered
stdout still arrived and repopulated the matrix, reopening the card the
user just closed. Both collectors now honor qrExpectedStop, and the flag
survives onExited because exit and stream-finished have no guaranteed
order. The password fetch gets the same treatment so a reveal in flight
during dismissal can't stash the secret into a closed card's state.
The content's focus was claimed while the window was still unmapped, so
Escape could land nowhere. Re-acquire it after mapping, the way
KeyboardPanel does.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Share WEP networks correctly and restore the QR quiet zone
NetworkManager models WEP as key-mgmt "none" plus a wep-key, so the QR
helper encoded WEP networks as open -- a QR that scans fine and then
silently fails to join. Encode them as T:WEP and let the password helper
print the key.
Also widen qrencode's margin from 2 to the spec's 4-module quiet zone;
the card surround is dark, so that white border is all a scanner gets.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Pins the active connection to 2.4/5/6GHz, or leaves the choice automatic.
The section only appears on Wi-Fi when the network answers on more than one
band, or while a pin is in force so it stays clearable.
bin/omarchy-network-band reports and sets the band. It sets NetworkManager's
802-11-wireless.band rather than pinning a BSSID: NM 1.44+ accepts a third
band value so 5 and 6GHz can be pinned apart, and a band survives an AP
rotating its BSSIDs while leaving roaming between APs intact. It refuses a
band the network does not answer on, and restores the previous setting if
reassociation fails rather than leaving the machine offline.
Under Automatic the pills collapse and the header reads the live band
("WI-FI BAND: 2.4GHZ"); pinning reveals them and the header goes plain. The
height is animated, and the section stays mounted through the reconnect a
band change causes -- otherwise `kind` briefly stops being "wifi" and the
whole segment would tear down and rebuild.
Two fixes to the same panel fall out of this:
- Every stat row stays mounted and reads "--" until it has data, instead of
appearing a beat after the panel opens and shoving the rows below down.
- The speed test's Run button is scaled to match the band header's controls
and joins the keyboard cursor chain.
ToggleSwitch gains a settable trackHeight so a compact placement can render a
genuinely small switch instead of scaling one down onto fractional pixels.
Defaults are unchanged.
Claude-Session: https://claude.ai/code/session_01XcKqYe1n5bnRBuAZwikwsr
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
