* Give built-in plugins an honest on/off state
Every built-in reported itself enabled no matter what. A bar widget said
"enabled" while sitting nowhere near the bar, and disabling a built-in service
silently did nothing, because enabled meant "listed in plugins[]" and a
built-in never is. Nothing surfaced that, since the only caller listing plugins
was the CLI.
For a widget, on and off is its place in the bar, so listPlugins reports layout
membership -- what enable/disable actually toggles. For everything else built
in, loading by default is the right behaviour to keep, so switching one off is
recorded the other way round, in disabledPlugins[]. shell.json still carries
only the deviation from the defaults: the key is dropped the moment nothing is
switched off, leaving a config that never disabled anything byte-identical.
isEnabled still answers a separate question -- whether the component loads at
all -- and deliberately does not follow a widget out of the bar. omarchy.menu
is both a widget and the menu itself, so tying the two together would let
taking its button off the bar lock the menu out of the shell, with no way back
that isn't the CLI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Manage plugins from Setup > Plugins
Plugins were CLI-only. Setup > Plugins now offers Enable, Disable, Add, and
Remove, each list living in the menu itself so picking a row acts on it.
Enable and Disable cover the built-ins as well as anything installed -- the bar
widgets you can put in the bar, the services and overlays you can switch off.
Remove is limited to plugins the user installed, since a built-in has no
checkout to delete, and stays hidden until there is one. Whole-bar
replacements are left out; those are chosen under Style.
Enabling a bar widget asks for a section first, because enabling alone drops it
on the right and the only way to move it was a follow-up bar plugin move. The
CLI asks the same question after its own add, so both paths place a widget the
same way. Add and Remove run in a terminal: one needs a git URL and shows the
trust warning before cloning, the other deletes a checkout and prints where it
backed it up.
Providers grew two hooks for this. placementFor turns a row into a submenu
instead of an action, and volatile re-runs the enumeration when its submenu is
entered -- picking from these lists is what changes them, and rows a provider
no longer returns now drop out instead of lingering forever.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the plugin menu after review
Menu.qml carried its own shellQuote while already importing Util and calling
Util.shellQuote a few lines up; two copies of the same escaping is one place
for a future fix to miss. isDisabled walked the array by hand to compare values
it writes itself, and dropDisabled was an eight-line helper with one caller.
Two bugs came out of the same pass. A whole-bar replacement belongs under Style
rather than these lists, but the exclusion sat in the shared row builder, so a
third-party bar could be installed and never removed -- Remove would show an
empty list under a guard that said something was there. The exclusion now sits
on the two lists that mean it.
Rows are keyed by id, and distinct plugin ids can slugify alike: acme.foo,
acme_foo and acme-foo all give acme-foo. The merge keeps the first row per id,
so the rest simply vanished from the list with nothing to say why. Row ids are
now made distinct before merging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Pick a plugin the way we pick a theme
Setup > Plugins listed plugins as menu rows, which needed three providers, a
placement submenu, a volatile-refresh hook and a row-swap in the merge. Only
Font and Apps are built that way. Theme, Background, Unlock, Timezone and
Keybindings all pipe a list into omarchy-menu-select instead, which is one
action string and a small script -- so that is what these use now.
The trade is search: a plugin name is no longer findable from the root prompt.
Neither is a theme name or a timezone, and Enable Plugin still is, so the loss
sits where the rest of the menu already puts it.
Two pieces of the row machinery stay, because they are worth having for the
lists that remain. A volatile provider re-runs when its submenu is entered, so
a font installed since the shell started now shows up without restarting it,
and rows a provider stops returning drop out. Row ids are still made distinct
before merging: Fira Code and Fira-Code both slug to fira-code, and a repeated
id was silently dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let a picked option carry an icon
Moving the plugin lists onto omarchy-menu-select cost them their glyphs: the
select mode has always hardcoded an empty icon, which is why Timezone and
Keybindings have none either. An option may now lead with one, as
"<glyph><TAB><label>". The menu shows the glyph, filters on the label, and
hands the label back, so a caller never strips a glyph off its own selection
and a list of plain strings behaves exactly as before.
The plugin picker uses it for the puzzle glyph on each plugin and the align
glyphs on the sections, which also regain the capitals they lost when the
section names were passed through raw.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Switch bars by enabling one
A bar option was kept out of Enable and Disable on the grounds that picking
which bar to run belongs under Style -- but nothing under Style ever offered
it, so an installed bar could be added and removed and never actually put to
use. The menu was guarding a door to a room that was never built.
Enabling one is the switch. setEnabled already assigns bar.id for a bar
option, so a bar has always replaced the one before it; only the picker's
filter stood in the way. Dropping it costs nothing else, because enabled for a
bar option means active: the bar in use is the one row absent from Enable,
every other installed bar is one pick away, and the built-in is just another
entry, so going back to it is enabling Bar.
Disable keeps the exclusion. That is the one verb a bar cannot answer -- there
is no off, only a successor -- and offering it would have listed the built-in
bar on a stock system, where turning it off deletes a bar.id that was never
set and nothing happens.
A bar carries the bar glyph rather than the puzzle one, so a row that replaces
the whole bar does not read like one more widget to switch on, and enable now
says "Now using X as the bar" instead of "Enabled X", which understated a
whole-bar swap in both the enable and the freshly-added path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Refuse a plugin that declares a kind it cannot load
A kind is a promise to supply something to load, and the shell reads that
something from a fixed key: entryPoints.bar to draw a bar, entryPoints.menu to
open a menu. Nothing checked the promise. A manifest could claim kinds ["bar"]
with no bar entry point, pass validation, install, and enable -- and then the
bar would fall back to the built-in and the widget would be skipped, leaving a
plugin that does nothing, explained only by a console.warn nobody reads.
Our own plugins have been held to this table by plugins-test.sh all along.
This holds third-party ones to the same table, at add and update time, where
there is still someone to tell.
A kind outside the table is left alone rather than guessed at, so a shell that
learns a new kind does not need this list updated first. The cost is that a
misspelled kind still installs quietly.
omarchy-plugin-validate had no tests; it has some now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Act on the plugin whose row was picked
The picker showed a name and then looked that name up again across every
plugin, filtered set or not, taking the first match. Two plugins can share a
name: cloning one keeps the name it was cloned from, so the documented
`omarchy plugin clone omarchy.clock local.clock` leaves two plugins called
Clock. Enable listed the clone -- the built-in was already enabled, so only the
clone was eligible -- and then enabled omarchy.clock, moving the built-in
widget instead. Remove listed the clone and tried to delete a built-in that has
no checkout to delete.
A row now carries its id alongside its label, and the id is read back off the
row that was picked instead of being derived from the name a second time. Where
a name is not unique among the rows on offer, the label carries the id too, so
two rows that would both say Clock can be told apart at all -- which they could
not before, whichever one the pick resolved to.
The verb prompt only ever sees the first two fields, so the menu shows what it
always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Never ask a bar where to sit in the bar
A manifest may declare both bar and bar-widget, and validation accepts it. The
picker saw bar-widget, asked for a section, and passed it to enable. setEnabled
takes bar as the dominant kind: it writes bar.id and returns, adding nothing to
any layout, so the move that followed had no widget to find and failed -- after
the bar had already been switched. A partial success with an error on the way
out.
Bar wins ahead of bar-widget now, in the picker and in the placement prompt
`plugin add --enable` asks, so a bar is enabled without a placement it cannot
use. The CLI refuses a placement on a bar outright, before the bar is switched
rather than after, since `omarchy plugin enable <bar> --section left` could
reach the same half-applied state without going through either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Only replacement, no off
* Add default placement for bar widgets
* Simplify plugin menu actions
* Document plugin placement behavior
* Allow dropping widgets in empty bar space
* Treat plugin dependencies as runtime invariants
* Reject duplicate plugin ids on add
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Kvantum is a QStyle plugin, so it only ever painted the three QWidget
apps we ship, and it painted them with its own stock look: Omarchy has
never shipped a .kvconfig, so nothing about it tracked the active theme.
Without it Qt falls back to built-in Fusion while the palette still comes
from QT_QPA_PLATFORMTHEME=gtk3, so everything stays dark and now follows
the theme instead of ignoring it. Measured across a full 1920x1080 frame,
dropping it moves obs-studio by 132 pixels -- it overrides the platform
style with its own stylesheet anyway -- kdenlive by 0.8%, and the
Hyprland share picker by 4.7%. Flatter buttons, classic tabs, a
conventional checkbox tick.
Existing machines get a migration, which the Qt5 stack never did. The
difference is that this removal cannot reach the greeter. kvantum-qt5
goes in the same transaction, since it is the only thing that requires
kvantum, and it takes qt5-svg and qt5-x11extras along with it -- but
qt5-wayland is explicitly installed, so the cascade stops there and
leaves qt5-declarative and qt5-base standing for any sddm theme still
starting the Qt5 greeter.
kvantummanager stays in launcher.hides. The entry costs nothing once the
package is gone, and it keeps Kvantum Manager out of the launcher on
machines that have not run the migration yet.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
JetBrainsMono Nerd Font draws 10% of the em above the ascent Text
reserves for it (yMax 1120 against ascent 1020), and a patched or
user-chosen family can be worse. In normal flow that sliver costs
nothing; at the top of a clipping list it is sliced off and the header
renders beheaded.
Reserving it in PanelSectionHeader covers every panel at once, rather
than each list working around it in its own geometry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The widget hid itself well enough that nobody found it: it only ever
appeared if you knew the id and ran `omarchy bar plugin add`, since it was
in neither the shipped layout nor any migration.
Defaulting it on costs nothing on machines that don't use it. Panel.qml is
`visible: providers.length > 0`, and Main.qml only counts a provider that
is enabled and has actually recorded prompts, sessions, active days, or a
rate limit. A box that has never run Claude Code or Codex draws an empty
bar item, and the icon arrives on its own at the first scan that finds
usage — which is the behavior the widget already advertised.
The migration skips any config that already lists the widget in any
section, so a curated bar keeps its own placement rather than gaining a
second copy.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
CapsLock is the compose key, so Caps Lock has to live somewhere else, and
both Shifts together is where it went. That combination is easy to hit by
accident while typing, and the lock then sticks until you notice it and
hit both Shifts again.
shift:both_capslock_cancel sets the lock exactly the same way, but types
the Shift keys as ALPHABETIC rather than TWO_LEVEL, so the next lone
Shift releases it. Since a misfire happens while reaching for Shift
anyway, it clears itself almost immediately.
Compose is untouched: <CAPS> stays [Multi_key, Multi_key], so the
~/.XCompose emoji sequences work as before.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The panel drove a Flickable by hand: two Repeaters in a Column, plus an
ensureCursorVisible() that mapped each row into content coordinates and
moved contentY itself. That is the machinery a ListView already has, and
the hand-rolled version came with a 6px margin that scrolled the list
whenever the mouse merely rested near the viewport edge.
Flatten the remembered and discovered groups into one model whose entries
carry the section they came from, and let the view keep the current row
visible. Section headers are computed per index the way the network panel
does it. The cursor keeps working in section-relative terms, so
activation, forget, hover, and the hero toggle are untouched.
Positioning has to be deferred a turn: called straight out of
onCurrentIndexChanged it silently does nothing, because the model is
rebuilt every time discovery reports and the swap resets the view out
from under the call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
kvantum-qt5 only ever existed to dark-mode VLC, and VLC is retired.
qt5-wayland was the Qt5 Wayland platform plugin, but it also quietly
dragged in qt5-declarative, which is what kept sddm's Qt5 greeter alive.
No application we ship runs on Qt5 any more, so the whole stack goes
from fresh installs: about 110 MiB across kvantum-qt5, qt5-wayland,
qt5-declarative, qt5-base, qt5-svg, qt5-x11extras and qt5-translations.
fcitx5-qt keeps a few Qt5 objects it builds regardless, and they simply
go unused.
sddm picks its greeter from the theme's SddmGreeterTheme/QtVersion and
defaults that key to 5, so a theme without it execs the Qt5
/usr/bin/sddm-greeter. That tie is only an optdepend, so pacman would
happily take qt5-declarative and leave a login screen that cannot start.
The theme declares QtVersion=6 now, and the Qt6 greeter renders it
unchanged.
kvantum, the Qt6 style engine behind QT_STYLE_OVERRIDE, was only ever
present as a dependency of kvantum-qt5, so the package list swaps to it
rather than dropping the line. obs, kdenlive and the share picker keep
the styling they have today.
Machines already installed keep their Qt5 stack. Shedding it there means
deciding which greeter sddm will actually launch, and that means
reimplementing its config loader: sddm reads every file in sddm.conf.d
whatever its extension, QSettings trims keys and lets the last duplicate
win, and ThemeDir can move the themes entirely. Not worth risking a
login screen for 110 MiB that a reinstall reclaims anyway.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every other bluetoothctl call in the script is silenced and time-boxed;
the new power check was neither, so a wedged D-Bus could hang pair before
it reached its own timeout and spill dbus assertions onto stderr.
Cover both paths with a stubbed bluetoothctl: the power-on sequence is
skipped when the adapter reports Powered: yes, and still runs when it
does not.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The edge channel installs omarchy-dev, but omarchy-version only queried
omarchy, so it exited 1 there. omarchy-snapshot runs under set -e, so the
failed lookup aborted the whole update over a snapshot label.
It only worked at all because omarchy-dev declares provides=(omarchy) from
the installer repo. Builds without it fail, so check both packages here
instead of relying on a declaration from another tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The shell starts before DHCP finishes, so Claude's first probe of the
OAuth usage endpoint came back as a transport failure and pinned "Claude
limits unavailable" for a full refresh interval. Opening the panel could
not clear it either: the open path refreshed unforced and hit the same
throttle it was trying to escape.
A transport failure now arms a short retry that goes straight to the
probe, since a retry answering to the throttle never gets off the
ground. Any real answer disarms it — a server that replied, 429
included, is one to stop pestering. Probes are single-flight, a fresh
token skips the throttle its predecessor set, and opening the panel asks
for the wire without re-walking every transcript on disk.
The module also earns its place in the bar now instead of sitting there
dimmed with nothing to say: it collapses out entirely until a provider
has actually recorded usage, here or on a synced machine. That made both
presence probes redundant, so they are gone. Selection follows the
provider rather than its slot, so one appearing while the panel is open
no longer swaps out what you were reading.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Clipboard history is fed by two wl-paste --watch processes started once
when the shell loads. When one dies, nothing notices: copying still
works, the picker still opens, and the old entries are all still there,
so history just silently stops recording until the next shell reload.
Respawn them on exit instead. The one-shot timer both coalesces the case
where both watchers die together and keeps a wl-paste that cannot start
at all from spinning as fast as fork allows.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The hero switch is the panel's on/off, so it now carries output and input
together rather than output alone. It reads as on while anything is still
audible, which keeps muting a single channel from flipping the master switch.
Right-clicking a volume bar mutes just that channel -- output, input, or one
app's stream -- matching what the `m` key already does for the focused row.
Only channels that exist get a vote: a machine with no default source would
otherwise report its input unmuted forever, leaving the switch able to mute but
never to unmute.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Sliders only ever accepted the left button. Audio wants right-click as a
secondary action on the track, so emit rightClicked() for it and keep dragging
left-button-only: press and release both ignore anything else, so a right-click
can neither start a drag nor move the value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every install row that leaves a durable artifact now carries a `when`
that mirrors its remove counterpart, negated. Packages check
`omarchy-pkg-present`, Ollama checks the command since the action picks
between three packages, and the rest check whatever the installer
actually leaves behind: Games/battlenet, the Xbox Cloud and Windows VM
desktop files, the flatpak, the mise install dirs, ~/.rustup, ~/.opam,
the composer laravel binary, the phx_new archive.
Chromium Account now shows only when chromium-flags.conf exists and
lacks the oauth client id. It was a visible no-op both before Chromium
was installed and after the flags had been added.
The pickers stay unguarded: Package, AUR, Web App, TUI, Style, Docker
DB, and the RetroArch Game Launcher, which builds one launcher per game.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
pacman refuses to install over a file it doesn't own, so any path an
Omarchy package starts shipping that a script had already written by
hand aborts the whole upgrade:
omarchy-settings-dev: /usr/lib/systemd/user/omarchy-fcitx5.service exists in filesystem
Errors occurred, no packages were upgraded.
The mitigation was a hand-maintained --overwrite allowlist, and it only
worked with foresight: an entry had to ship a release before the package
took the path, because pacman checks conflicts during transaction
prepare, so the script running the upgrade is the one already on disk. A
missed entry left people hard-stuck, since the upgrade that would
deliver the entry is the one refusing to run.
So react instead. omarchy-update-system-pkgs now does the ordinary thing
and hands a failed transaction to omarchy-update-system-pkgs-when-
conflicted, which moves the offending files out of the way and runs the
upgrade again. Nothing has to be predicted, and the allowlist is gone.
Moving rather than overwriting is what makes it small: no --overwrite
argument to build, no glob escaping, no separate backup step, and a
leftover directory is cleared too, which --overwrite cannot do at all.
Files go to /var/lib/omarchy/replaced/<original path>, not next to the
original. A sibling copy is not inert -- SDDM reads every file in
sddm.conf.d whatever its extension, and systemd-sleep runs every
executable in system-sleep -- and the directory a future path lives in
is unknowable, which is the whole point of a mechanism for paths nobody
predicted.
What it will not do:
- Take a file another package owns. pacman reports those with a
"(owned by x)" suffix, so the end anchor excludes them, and pacman -Qo
re-checks the live database before anything moves.
- Move a subset. If any reported conflict isn't recoverable the retry is
doomed anyway, and moving leaves that config inactive for nothing --
worse than the stuck-but-intact state.
- Leave anything inactive that was live. A failed retry, a failed move
partway through the loop, or an interrupt all put back whatever the
upgrade didn't install.
- Act on a report handed to it by hand. It is internal to the update,
and an old report would clear live files for an upgrade that isn't
happening.
Also adds a test that fails when a script writes a path under /usr that
no PKGBUILD installs, since not creating these is cheaper than
recovering from them. It reads the destination off the command, so a
path assembled from variables still slips through; the two known cases
are recorded with their reasons.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
omarchy-migrate-notify handed its notification to `systemd-run --scope`,
which is synchronous: the calling process becomes the payload, so
systemd-run does not return until the toast has been answered -- and if
the toast is clicked, not until the migration terminal it opens has been
closed.
omarchy-migrate-notify.service is Type=oneshot, which defaults to
TimeoutStartUSec=infinity, so the unit sat in activating for exactly that
long. On a machine that had not yet picked up c7e327b0, which orders the
notifier after graphical-session.target, that held the target open --
and wayland-wm-app-daemon.service is ordered after the same target, so it
never started. Every keybinding goes through uwsm-app, which waits ten
seconds for that daemon's pipes and then reports "App failure -- Timed
out waiting for pipes!" instead of launching anything. Keybindings were
dead for two minutes and seventeen seconds, until a pacman hook ran
`systemctl reload user@*.service`, whose re-exec of the user manager
broke the scope's bus connection and let the oneshot finish. That also
made systemd-run exit non-zero, so the notifier fell through to the
terminal fallback meant for having no user manager at all, and printed
the migration list into the journal.
Hand the notification to a transient service instead. systemd-run
returns once the unit has started rather than once the payload is done,
so the oneshot completes in milliseconds and nothing ordered after the
target waits on a toast. Put it in background-graphical.slice, which
systemd ships with PartOf=graphical-session.target, so an unanswered
toast ends at logout rather than outliving the session.
The terminal a clicked toast opens is unaffected: uwsm-app re-registers
it into app-graphical.slice, outside this unit's cgroup.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
fcitx5 is what turns the CapsLock compose sequences in ~/.XCompose into
text for Wayland clients -- CapsLock m s for an emoji, CapsLock space n
for your name. It was launched fire-and-forget from Hyprland's autostart
via uwsm-app, so nothing supervised it, nothing restarted it, and it
logged nowhere. When it went away, every compose sequence stopped
working for the rest of the session with no visible symptom beyond
"emoji input is busted", and no record of why.
That is not hypothetical: it was found dead on a running machine with no
coredump, no OOM kill, and nothing in the journal to explain it.
Move it to a systemd user service:
- Restart=always, not on-failure. fcitx5 exits 0 when it finds another
instance already owning org.fcitx.Fcitx5, and a clean exit still
leaves the user with no input method.
- After=/PartOf=graphical-session.target. It needs WAYLAND_DISPLAY and
DISPLAY, which uwsm imports into the user manager before reaching the
target, and its wayland connection dies with the compositor.
- ConditionEnvironment=WAYLAND_DISPLAY. After= is ordering only and does
not stop the unit from being started while the target is inactive. An
update over SSH has a live user manager (pam_systemd) and no graphical
session, and a fcitx5 started there comes up blind -- then stays
active, so the later target activation won't pull in a working one,
because Wants= does not restart what is already running. Skipping the
start leaves the unit enabled and healthy for the next graphical login.
The migration hands over inside a live session only: it enables without
--now, and only when graphical-session.target is active does it drop the
autostart-launched process and start the unit. Because that kills a
fcitx5 that was working a moment ago, a failed start is reported instead
of leaving the session mute with the migration marked complete.
omarchy-restart-xcompose now drives the unit. It still clears any fcitx5
running outside it first: that process owns the bus name, so the unit's
instance would exit on arrival and the stale one would keep serving the
old table -- a restart that reports success and changes nothing.
Side benefit: fcitx5 now logs to the journal under its own unit, so the
next disappearance leaves a record.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Enable cd/dvd ejection by default for all systems with a key mapped to "XF86Eject".
This e.g. activates the eject button on vintage Macbook Pro laptops with optical drives.
The retired omarchy-update-user-notify.path stays loaded in sessions that
started before the update removing it, and pacman writes the migrations
directory mid-transaction, so it fired a critical toast for migrations that
omarchy-migrate was about to apply a step later. Migration 1785095882 stops
that watcher, but migrations run after pacman, so it lands 11 seconds too
late to prevent the toast it exists to retire.
Check the lock omarchy-update holds for its whole pipeline instead of
trusting that no trigger exists. That covers the stale watcher and anything
added later: during an update every pending migration is by definition
already being applied. The check repeats after waiting for the notification
server, which is long enough for an update to start underneath it.
Only this user's runtime directory is read, never the /tmp path the updater
falls back to without XDG_RUNTIME_DIR. A shared lock file belongs to whoever
created it first, so honouring it would let one user silence another user's
notification; a redundant toast is the better failure.
The sleep inhibitor now starts with the lock descriptor closed. It outlives
the step that starts it, so an update killed before restore_update_inhibitors
left it holding the flock indefinitely. That already blocked later updates,
and now that the notifier reads the same lock it would have silenced
migration notices at every login.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Chromium ships in the base packages, so it never goes through
omarchy-install-browser, and a first install stamps every migration as
already applied without running it. That left both bundled extensions
loaded from chromium-flags.conf with no host to talk to: Copy URL did
nothing at all, since the clipboard write and the toast both live in the
host.
The user install now registers both hosts itself, and a migration
repairs the installs that already missed out — Copy URL since 1784763917
landed, Download Video since 1780517689, unless installing a browser or
refreshing Chromium happened to fix them along the way.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VeAd2iERgi7bRSxq2gA1hp
The migration went away in 88ef6ca5, and the test resolved it by grepping
migrations/ for its banner, so it could only fail from that commit on. It
used the shipped 90-omarchy.conf as a fixture only; config-test and
zram-migration-test still cover that file.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
omarchy-migrate-notify.service is a Type=oneshot wanted by
graphical-session.target, and systemd complements a target's Wants= with an
implicit After=, so the target waited for the notifier to exit. The notifier
does not exit quickly: it sends the notification through systemd-run --scope,
which is synchronous, and omarchy-notification-send -a blocks until the user
clicks. The target stayed in activating for as long as the toast was up.
wayland-wm-app-daemon.service is After=graphical-session.target and nothing
wants it, so uwsm-app starts it on demand. Clicking the notification runs
omarchy-launch-floating-terminal-with-presentation, which execs uwsm-app,
which blocks on a systemctl --user restart of that daemon -- a job queued
behind the very target the clicked notifier was holding open. The terminal
never opened; uwsm-app gave up on its own pipe timeout instead.
Declaring After= on the wanted unit suppresses the implicit dependency rather
than forming a cycle, so the target is reached without waiting and the
notifier runs behind it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The bar is instantiated once per screen, so each widget registers its IPC
handler once per screen and Quickshell reports a collision for every screen
past the first. Failing on any collision would have failed the suite on
multi-monitor desktops for behaviour that is correct; allow one per screen
and fail only beyond that, which is still what duplicate component loads
produce.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Qt.createComponent is asynchronous, but a widget was only recorded in
pluginWidgetComponents once its component finished. syncPluginWidgets runs
several times while the shell starts, and every pass that ran while a load
was still in flight could not tell it apart from one that had never
happened — so it started a second load of the same URL. All twenty bar
widgets were loaded twice.
The duplicate component then replaced the first in the registry, and
swapping a slot's component makes its Loader build the replacement before
dropping the original. Both were briefly live, and both registered the
widget's IPC handler, which is where the "another handler is registered
for target" warnings came from.
Claim the key when the load starts instead, and release it if the
component fails so a later rescan can retry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both sides tightened the same center-layout assertion. Taking quattro's:
it asserts the weather/update adjacency the test name is about instead of
pinning the whole row, which is what kept breaking it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The center section declares both an anchored and an unanchored
arrangement and shows whichever fits, but a hidden ModuleList is still a
loaded Loader. With a center anchor set — the default — every center
module was therefore mounted twice for the life of the session: two IPC
handlers registered for the same target, two clocks ticking, two of every
timer and network fetch behind them, one set of which nothing could
reach.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Double-tapping the year bar asks for a birth year and a life expectancy,
and a second bar appears below measuring one against the other. Tab moves
between the two, Enter commits the pair, Escape drops them. Hovering the
bar names the thing, and double-tapping it puts it away again.
A birth year rather than an age, so the bar keeps counting on its own
instead of going stale the moment it is entered. Expectancy defaults to
ninety and falls back to it when what is entered makes no sense, so the
bar always has something to measure against; a birth year that makes no
sense leaves the bar hidden instead, which is also where it starts.
Putting the bar away keeps the expectancy, so setting a birth year again
brings your own number back rather than the default.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
