567e24cd90eb154150614bf5a092fe0e6e7b75e5
5955
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
567e24cd90 |
Hold the indicator peek open while the pointer is on the bar (#6663)
* Hold the indicator peek open while the pointer is on the bar Revealing the hidden indicators widens their section, and a section that grows can slide a neighbouring widget under a pointer that never moved. Collapsing the peek on that un-hover narrowed the section again, moved the neighbour back out, and re-opened the peek, so a pointer resting in the bar space beside a grown section stuttered the bar until it moved away. Hold the peek while the pointer is anywhere on the bar and close it only once the pointer has left, which keeps the reveal-on-empty-space gesture and drops the feedback loop. Fixes #6581 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Assert the whole-bar hover helper does what the peek depends on The earlier assertions all held against a no-op setBarHovered, which would leave barHovered false and let the oscillation straight back in. Pin the assignment and the collapse re-run too, so the helper cannot be emptied without the suite noticing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Let the delayed peek re-check collapse only, never open The timer assigned centerSectionRevealHeld outright, so it opened the peek from bar hover alone. A pointer resting on the left section that dipped off the bar and returned inside 120ms left the timer pending with barHovered true again, and the indicators revealed without the pointer ever touching the center section. Opening stays the center section's own gesture in setCenterSectionHovered. The timer now only closes what that opened, and the test asserts the invariant against the whole file rather than one helper body that never had the offending assignment in it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Tally bar hover per monitor instead of sharing one flag Every screen's bar wrote the same barHovered bool, last writer wins. Sliding along the top edge from one monitor's bar to the next can deliver the enter before the leave, leaving the flag false under a live pointer; the collapse then fired on a peek the user was still hovering, and no further hover change arrived to correct it until the pointer left and came back. Counting each surface's hover makes the order irrelevant. A bar destroyed mid-hover — unplugging a monitor — never sends a leave, so it hands its tally back on destruction rather than holding the peek open for good. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> Co-authored-by: David Heinemeier Hansson <david@hey.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
199bd01f94 |
Reach every window the region picker can highlight
Warping to a target window's center selects the wrong window when a smaller one covers that center: slurp keeps highlighting the coverer, so Tab could never leave it. Navigation now warps to the most central point that resolves back to the target, and skips windows that hovering could not reach either. Unbinding the picker's transient keys by name also took a same-key binding out of the user's own config with it; the bind handles are now kept and removed individually. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
366c708e44 |
Keyboard window capture in the region picker: Return, Tab, arrows (#6466)
* Keyboard window capture in the region picker: Ctrl+Return, Tab, arrows Return already captures the entire focused monitor while slurp is open, but grabbing a single window required the mouse: hover highlights a window, a click captures it. Now the keyboard can do the same. Ctrl+Return captures the selected window — the one under the cursor, falling back to the focused window. Tab and Ctrl+Tab cycle that selection through the workspace's windows in reading order, and the arrow keys move it spatially; both warp the cursor to the target window's center, so slurp's own hover highlight tracks the selection. Ctrl+Return is implemented like --take-fullscreen: a layer-scoped bind flags the intent via a marker file and dismisses slurp, and the picker resolves the window under the cursor. On an empty workspace the pick resolves to nothing and exits as cancelled. Ctrl is the chord modifier because slurp reacts to held Shift by squaring the selection's aspect ratio, which visibly reshapes the hover highlight mid-chord. None of the keys slurp itself uses (Escape, held Space to move a selection, held Shift) are bound, so its own keyboard behavior is unchanged. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Resolve overlapping windows the way slurp highlights them slurp highlights the smallest box under the cursor, but the capture and selection hit-tests returned the first geometric match in hyprctl clients order. With a floating window over a tiled one, Ctrl+Return could capture the window underneath the visibly highlighted one. Track the smallest containing window instead, in both the capture resolution and the selection-movement origin. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Document the region picker's keyboard modes in its usage line Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Resolve keyboard capture and navigation from one rectangle list Duplicate window geometry (tabbed groups, stacked floating windows) stalled the Tab cycle on the first copy, and the smallest-window-under-cursor tie-break was applied to two differently ordered lists, so navigation could cycle from one window while Ctrl+Return captured another. Ctrl+Return over a gap or an empty workspace also ignored the monitor rectangle slurp was highlighting. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Capture the highlighted window with Return, the display with Ctrl+Return The picker highlights a window under the cursor far more often than a whole display, so the unmodified key takes the highlighted rectangle. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> Co-authored-by: David Heinemeier Hansson <david@hey.com> |
||
|
David Heinemeier Hansson
|
03b825f59a |
Show Herdr keybindings with SUPER + CTRL + K
Mirrors the Tmux keybindings menu on SUPER + ALT + K. Herdr has no CLI that dumps resolved bindings, so the action list and its defaults come from `herdr --default-config`, where every action appears as a commented assignment, and the user config overrides what it sets. Prose in that default config can read like an assignment, as in `# type = "popup" opens a session-modal terminal`, so a line counts only when its value is a bare string or an array of them. Both TOML quote characters open a string, and with no config file at all the listing shows Herdr's own defaults rather than the Omarchy seed config Herdr never loaded. |
||
|
David Heinemeier Hansson
|
507059e548 |
Open Herdr with SUPER + CTRL + RETURN
Mirrors the Tmux binding on SUPER + ALT + RETURN. Herdr reattaches to the persistent session on its own, so the launcher needs no attach-or-create dance. |
||
|
David Heinemeier HanssonandClaude Opus 5
|
932efbd58b |
Center the first-boot setup screen and fix its greeter animation
The setup progress screen stacked from row one while the greeter that precedes it was already centered, so first boot changed shape between its two frames. Center it on the same block height the ISO install dashboard uses — logo, blank, title, blank, bar, blank, tip — and repaint it if the VT resizes, which is the same virtio-gpu KMS handoff the greeter already watches for. The greeter's ttfx call never passed --xterm-colors, so it hit exactly the failure the comment above it describes: ttfx resolves even indexed stops to truecolor, and the console reduces 256-colour codes well but 24-bit ones badly. The gradient was being crushed rather than rendering as the indexed palette it was written for, and the settle colour drifted off the green logo drawn beneath it. --canvas-width was cols-1 to stay off the autowrap column, which held for tte. ttfx centres its text two columns right of plain centering, so cols-1 puts the animated logo a column off the static one and it jumps when the effect starts. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
4ab51df2b0 |
Require a factory snapshot to reset a computer (#6680)
Machines without @factory fell back to a degraded reset that kept the current system and only wiped user state. Turn them away with an explanation instead, and drop the degraded staging path. The first-boot worker still honors a wipe-degraded marker so a reset staged by an older version finishes its scrub rather than handing the machine over with the seller's accounts intact. Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
0b670cd13e |
Title herdr's terminal window like tmux did
tmux set the outer terminal title from `set-titles-string '#h:#W'`, which is what Hyprland reads for the group bar label. herdr had no equivalent, so grouped terminals kept whatever the shell or ssh last set - most visibly wrong when connected to a remote machine. herdr now renders `ui.window_title` on the server, so mirror the tmux line. herdr's own default matches, but setting it here keeps the group bar correct regardless of what upstream picks as its default. |
||
|
David Heinemeier HanssonandClaude Opus 5
|
9f13bfc157 |
Center the timezone picker in first-boot setup
The timezone prompt falls back to `gum filter` when tzupdate can't guess a zone, which is the common case on a first boot with no network yet. That was the one widget in the form without a GUM_*_PADDING export, so it drew flush left while every other step sat centered under the logo. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
2d44ad59be |
End deferred first boot on the finished progress bar
Clearing it for a "Starting Omarchy..." card only flashed another screen before SDDM took over. The cursor now stays hidden through the handoff and comes back only on the failure path, where the retry prompt needs it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
6d7826d635 |
Give non-login shells the system locale
/etc/profile.d/locale.sh only runs for login shells, so bash started by SSH or herdr's remote bridge ran in the C locale, where printf emits \u/\U escapes literally instead of the character. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
7633d8dee4 |
Keep the bar mapped while hidden so revealing it is instant (#6677)
* Keep the bar mapped while hidden so revealing it is instant Hiding the bar set the panel invisible, which unmaps the layer surface and releases the scene graph with it. Every reveal then had to rebuild all of it: a new layer surface, a configure roundtrip, re-shaped glyphs and re-uploaded textures, and a first frame before anything appeared. Measured on a 2560x1440 screen, showing took 155-175ms against 20ms to hide, and 400-595ms on the first reveal after a cold start. Splitting the cost showed the exclusive-zone reflow was not to blame: show latency was the same on an empty workspace as on a tiled one, and windows finished moving ~15ms after the bar was already on screen. Park the bar one bar-width past its anchored edge instead, and drop its exclusion zone while hidden. The surface stays alive, so showing is only a margin change: 10-14ms in both directions, at every bar position. Since a hidden bar is now mapped, layer_present no longer proves the bar is visible; the session acceptance test asserts on-screen geometry. * Fix layer visibility checks on offset monitors * Handle rotated outputs in layer visibility checks * Cover hidden bar behavior in acceptance tests --------- Co-authored-by: David Heinemeier Hansson <david@hey.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
354c2f0060 |
Wait for the terminal resize before the first screensaver effect
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
4cc14933a4 | Use sudo for terminal update inhibition | ||
|
David Heinemeier HanssonandClaude Opus 5
|
dc1224c03a |
Stop the sleep lock budget assertion from flaking
A 1500ms budget plus the one 100ms poll interval the trailing sleep can overshoot is exactly 1600ms, which was the bound — but the test measures a whole process around that, so startup pushed real runs to 1602ms. Carry another interval. Two intervals of overshoot, the regression this guards, still trips it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
f228c4d390 |
Stop checking for commands the package set guarantees
gum and ttfx ship in omarchy-base.packages and setfont comes with kbd, so none of them needs a presence check — and every setfont call already tolerates a failure anyway. btrfs-progs is in omarchy-other.packages and a reset genuinely cannot proceed without it, so that one keeps its guard and moves to the helper. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
4564c24a0e |
Cover the shared setup form's cancel contract
The form's 0/1/130 statuses gate both the ISO configurator and first-boot setup, and nothing tested them. Stubs gum with scripted per-screen answers and drives each prompt bare under `set -euo pipefail` — the shape that makes the status capture load-bearing, since a cancelled prompt is a failing assignment. A RETURN trap marks that the prompt returned its status rather than the shell dying inside it; both exit identically otherwise, so that marker is what catches a regression to a plain `status=$?`. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
4e31b61af0 |
Swap terminaltexteffects for ttfx (#6670)
* Swap terminaltexteffects for ttfx ttfx is a Rust port of terminaltexteffects that renders byte-identical frames as a single dependency-free binary. Same option names, defaults, and exit codes, so every invocation here is unchanged apart from the command name. The screensaver runs at --frame-rate 120 with --random-effect. On a fullscreen canvas Python cannot hold that for the heavier effects (beams: 14.1 ms/frame against an 8.3 ms budget, so ~71fps); ttfx renders the same effect at 564fps. Startup drops from ~107 ms to ~1 ms, and the base image no longer needs Python for the screensaver. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Need a migration --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
7644b56d4e |
Extract the setup form shared with the ISO installer (#6669)
The keyboard layout list, the account and hostname validation rules, and the gum prompts that ask for them all existed twice: once in the ISO configurator's user step, once in first-boot owner setup. Nothing kept the copies honest, and they had already drifted — a layout removed on one side moved English (US) onto a page boundary on the other, burying the default at the bottom of a screen of layouts. install/provisioning/setup-form.sh is now the only copy. The PKGBUILD's existing `cp -a install` ships it to /usr/share/omarchy/install/provisioning/, and the ISO build vendors that very file out of the runtime package it bundles, so an install and the first boot that finishes it cannot offer different layouts or accept different usernames. Cancel handling is unified along the way, which is what made the prompts shareable at all. Every prompt reports 0 (answered), 1 (Esc — unwind to the start of the form), or 130 (Ctrl+C — a side channel each caller defines). Previously Esc and Ctrl+C were indistinguishable here: both re-asked the same field, so there was no way back to an earlier answer. Ctrl+C now offers a confirmed reboot instead. It cannot be a SIGINT trap — gum reads Ctrl+C as a byte in raw mode, so the shell never receives the signal — so it hangs off the exit status. Status capture is written as `x=$(gum ...) && status=0 || status=$?` because this script runs under `set -e`, where a cancelled prompt is a failing assignment that would kill setup before the status could be read. English (US) also leads the layout list now, ahead of the other English variants. gum choose paginates in --height-sized pages and jumps to the page holding --selected, so an alphabetical default landed wherever the list length happened to put it. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandGitHub
|
c7c897cb4f | Follow herdr's new tab bar status config (#6674) | ||
|
|
0a8359072c |
Show install-style progress through first-boot account setup (#6631)
* Add OEM first-boot setup and factory reset An OEM-mode ISO install (or omarchy-reset-computer) leaves the machine in OEM state: fully installed, no user, /var/lib/omarchy/oem/pending armed. On the next boot omarchy-oem-setup.service runs the configurator's user form on tty1, creates the user with the groups system setup recorded, finalizes it offline from the stashed Node tarball, re-keys LUKS from the throwaway install passphrase to the user's password, and hands off to SDDM. omarchy-reset-computer returns a machine to that state: it swaps the running root for a fresh clone of the @factory snapshot the ISO takes at install time, scrubs machine identity and prior users, and stages omarchy-factory-wipe to drop the old root and recreate @home/@log on the next boot. Machines installed before @factory existed get a degraded reset (current system kept, users and state wiped) with that caveat surfaced in the confirmation. omarchy-setup-system/-hardware gain --oem to run without an install user; the group-granting install scripts now record their groups in /var/lib/omarchy/oem/groups and only call usermod when the user exists. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Harden OEM setup: correct cryptsetup key-file usage, retry on failure cryptsetup reads --test-passphrase/--key-file inputs byte-for-byte, so feed passphrases through process substitution consistently instead of positional args or stdin (which has different newline semantics). Run each first-boot setup attempt as its own process so a failure offers a retry instead of stranding the machine at a user-less login screen — bash ignores errexit inside `while !` conditions, a child process does not. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Always grant wheel sudo in OEM first-boot setup Detecting an existing %wheel grant by grepping sudoers is error-prone: omarchy ships narrow '%wheel ALL=(ALL) NOPASSWD: <command>' rules (e.g. asdcontrol) that match the naive pattern, which left the OEM-created user matching sudoers entries but unable to run anything. Write the drop-in unconditionally — a duplicate of an existing full grant is harmless. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Fix LUKS re-key device resolution and OEM state readability archinstall's encrypted installs put cryptdevice=PARTUUID=... on the kernel cmdline, not UUID=, so the first-boot re-key never found its device and silently skipped — leaving the throwaway auto-unlock keyfile in place, i.e. the disk effectively unencrypted. Parse every cryptdevice= source spec form and make any re-key failure abort the attempt loudly: a retry prompt beats a machine that quietly boots without a passphrase forever. The OEM state directory also has to be world-readable (its one secret, luks-key, stays 0600): user finalization reads the stashed Node tarball as the new user, and the 0700 directory forced it onto the network fallback. Step markers now land in /var/log/omarchy-oem-setup.log for debuggability. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Purge stale machine-id boot entries when resetting or re-keying limine-entry-tool keys its limine.conf OS entries by machine-id. A factory reset gives the machine a fresh identity, so the previous system's entry survived every rebuild, sorted first, and made Limine stop at a Blake2b hash-mismatch warning once the UKI was rebuilt. Start limine.conf over from the shipped template (and drop foreign machine-id history directories on the ESP) before any post-reset rebuild: in the staged chroot rebuild, in the first-boot LUKS re-key, and — for unencrypted resets, where nothing else rebuilds — in a dedicated first-boot refresh when foreign entries are found. The staged rebuild also verifies every UKI hash referenced by limine.conf against the file on the ESP before the subvolume swap, and the running system's limine-snapper-sync is runtime-masked during staging so it cannot rewrite the config behind the rebuild. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Harden reset and first-boot setup failure paths Review findings from codex and Copilot: - Generate throwaway passphrases without a trailing head stage: under pipefail, SIGPIPE from the infinite tr failed the substitution and errexit aborted every encrypted reset before it could stage anything. - Stage the fallible parts of a degraded reset (LUKS re-key, boot rebuild) before arming the wipe, so a staging failure leaves the machine untouched instead of scheduling a wipe for a reset that never finished. - Gate first-boot setup on the factory wipe having succeeded (ConditionPathExists=!wipe-pending plus an in-script guard): creating the new user on a half-wiped system would hand their data to the wipe retry. - Abort the wipe (keeping its retry marker) when deleting the old root or recreating @home/@log fails, and abort resets that cannot remove a prior account — a surviving account keeps its password and wheel membership. - Resume a partially-created account on setup retry instead of rejecting the username the failed attempt just created. - Only purge machine-id directories the old limine.conf actually referenced; a shared ESP may hold other installations' boot artifacts. - Recreate the hibernation swapfile (nested subvolume, so never captured by the factory snapshot) inside the factory root before its UKI rebuild, so a reset machine keeps disk-backed swap and a valid resume offset. - Source base-test.sh in the OEM groups test per test conventions. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Recreate the hibernation swapfile even when resume drop-ins survive omarchy-hibernation-setup short-circuits as 'already set up' when the resume mkinitcpio drop-in exists — which it always does in a factory root, while the swapfile itself never survives the snapshot (nested subvolume). Drop the marker when the swapfile is gone so setup reconfigures from scratch, and verify the swapfile actually exists before proceeding with the reset. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Second review pass: encrypted-config coverage, factory-baseline sanitization, recoverable rekey Codex xhigh round 2: - Detect the LUKS backing device by walking the root's device tree, not only the cmdline cryptdevice=; reset/first-boot now re-key roots reached via rd.luks/crypttab too, instead of silently leaving the seller's slots valid. - Sanitize the retained @factory baseline (accounts, /etc/shadow, machine identity) during a full reset: the new wheel user could otherwise mount it to recover the seller's data, and a second reset would restore the account. - Re-key the disk recoverably: rebuild the no-auto-unlock UKI before killing the throwaway slot or destroying the staged key, and restore the keyfile if that rebuild fails, so a retry with a different password can never leave the disk locked to the first attempt's password. - Roll back a degraded reset's live-root auto-unlock material if its boot rebuild fails, instead of leaving it for a later rebuild to embed. - Treat a missing current-machine limine entry as stale so a retry after a failed rebuild repairs the config instead of clearing OEM state over it. - Erase fingerprint enrollments (/var/lib/fprint) in degraded wipes. - Remove the resume-offset drop-in too when recreating the factory swapfile, so the rebuilt UKI gets a correct offset. - Pin first-boot retries to the account the first attempt created. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Expose factory reset in the Setup menu Add a 'Reset Computer' entry under Setup (Omarchy's Settings menu, where OS factory resets conventionally live), guarded to btrfs roots and launched in a floating terminal. omarchy-reset-computer now self-elevates via sudo so the menu entry needs no sudo prefix, forwarding the caller's gum theme env as env arguments so styling survives an env_reset sudoers. The typed 'reset' confirmation and the sudo password prompt remain as the guards against accidental triggering. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Defer keyboard selection to first boot for OEM installs The OEM first-boot setup now runs a keyboard step before the user form, mirroring the ISO configurator: it loads the chosen layout on the live VT so the password (and the LUKS re-key that follows) are typed under it, and persists it with systemd-firstboot so the installed system gets both the console KEYMAP and the XKB layout Hyprland reads — exactly what a normal install writes. Layouts localectl doesn't know keep the default, same as the installer. This lets the OEM operator set nothing user-specific: the machine's owner picks their keyboard alongside their account at first boot. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Rename factory-reset commands to omarchy-system-factory-reset[-finish] omarchy-reset-computer -> omarchy-system-factory-reset omarchy-factory-wipe -> omarchy-system-factory-reset-finish (and its systemd unit, log path, and temp mount to match) Pure rename: every reference — the Setup menu action, the first-boot finish service the reset stages and enables, the oem-setup ordering/gating, comments, and the menu test — moves together, with no behavior change. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Rename OEM vocabulary to provisioning (runtime) Commands unify under the provisioning family: omarchy-oem-setup → omarchy-provision-owner omarchy-finalize-user → omarchy-provision-user omarchy-first-run → omarchy-provision-first-run And the deferred-provisioning state/vocabulary replaces 'OEM': /var/lib/omarchy/oem/ → /var/lib/omarchy/provisioning/ /etc/omarchy/oem.key → /etc/omarchy/provisioning.key install/oem/ → install/provisioning/ OMARCHY_SETUP_CONTEXT=oem-firstboot → provision-owner omarchy-setup-system/-hardware --oem → --defer-provisioning All callers (provision-first-run→provision-user, autostart, factory-reset staging the provisioning units, the group-recording scripts) and comments move together. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Drop remaining OEM mentions from the provisioning groups test Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Show install-style progress through first-boot account setup The owner provisioning flow dropped to plain status lines after the confirm form, went dark for the minutes finalize-user takes, and ended with a two-second spinner. Give it the same treatment as the ISO install dashboard: the logo header with a live progress bar and rotating tips while the account is created, finalized, re-keyed, and the boot entries refreshed, then the same tte celebration — ending in a Start Omarchy Now button that hands off to SDDM, since first boot continues into the session rather than rebooting. The bar is the dashboard's engine in miniature: monotonic per-mille position from an asymptotic time floor per phase, with finalize-user's run_logged scripts in the log as the work signal. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Match the first-boot console font to the ISO installer The ISO installer runs on a low-resolution pre-KMS console, where the default 8x16 console font looks large. By the time omarchy-provision-owner runs, the installed system has reached full KMS resolution, where that same 8x16 font is physically tiny — so first-boot owner provisioning looked a lot smaller than the installer it continues. Scale the console font up on high-resolution framebuffers so the two read at the same size: latarcyrheb-sun32 (16x32) at >=1600px tall, sun12x22 at >=1150px, and the default left untouched below that (already installer-sized). Both fonts ship with kbd, so there's no new dependency, and it's a no-op off a real VT. Co-Authored-By: Claude <noreply@anthropic.com> * Make first-boot font resolution-adaptive; widen the encrypting band Two fixes to the first-boot provisioning screen surfaced on a real high-resolution display. Font: the earlier fixed thresholds could pick a 16px-wide font on a ~1280px-wide console — 80 columns, one short of the 81-column logo — so the logo wrapped and the layout looked misaligned. Replace the thresholds with a resolution-adaptive choice: pick the kbd font whose row count is closest to the ISO installer's ~48-row feel, but never one wide enough to drop below 90 columns, so the logo can never wrap. Low-resolution consoles land on the default font (a no-op), matching the installer. Progress: the LUKS re-key (a full UKI rebuild, the slowest step of an encrypted first boot) had only an 8%-wide band, so the bar looked stuck near the top while it worked. Make the bands adaptive — when a re-key is pending, finalize yields most of its room to a wide, steadily-moving re-key band; unencrypted installs keep finalize as the dominant step. Co-Authored-By: Claude <noreply@anthropic.com> * Add a Welcome greeter before first-boot setup Deferred-provisioning first boot dropped the new owner straight onto the keyboard picker. Open with a greeter instead — the same frame the setup ends on: static logo, a centered "Welcome to Omarchy", and a single "Start setup" button. No logo animation; it's the starting line, not the celebration. Shown once in main(), before the keyboard step, so retries don't repeat it. Co-Authored-By: Claude <noreply@anthropic.com> * Center the greeter and show the Omarchy tagline Vertically center the greeter block (logo, tagline, button) on the console like the boot logo, and replace "Welcome to Omarchy" with the tagline "Beautiful, Modern & Opinionated Linux by DHH". Co-Authored-By: Claude <noreply@anthropic.com> * Animate the greeter logo with a skippable ColorShift Run a looping tte ColorShift over the centered logo and replace the button with a "Press Return to Start Setup" hint. The effect reads from /dev/null so it never swallows the Return a foreground read waits on, and --reuse-canvas is anchored one row below the logo so it repaints exactly the rows drawn above. Return skips ahead into setup at any time. Co-Authored-By: Claude <noreply@anthropic.com> * Theme the greeter ColorShift to the Omarchy palette Sweep the logo ColorShift through the Tokyo Night accent colors (green, cyan, blue, purple, pink, orange) instead of tte's default rainbow, settling toward the Omarchy green. Co-Authored-By: Claude <noreply@anthropic.com> * Fix greeter ColorShift: green base, no flash, clean handoff - Use indexed ANSI colors (green 2 + cyan 6 accent), since the framebuffer console can't render tte's truecolor and crushed it to a muddy lavender. The result is a green-based shift with a cyan accent, settling on green. - Run one long tte invocation (--cycles 1000) instead of restarting every couple cycles, removing the flash at each loop. - Restore the tty with `stty sane` after killing the effect (tte leaves it raw/no-echo, which silently killed the following gum prompts) and clear the screen so the leftover frame doesn't linger under the keyboard step. Co-Authored-By: Claude <noreply@anthropic.com> * Kill the greeter animation cleanly so the form starts fresh The ColorShift ran inside a `while` subshell that was backgrounded and killed by its subshell PID — which orphaned the tte child, leaving it painting the logo over the keyboard step (the screen never cleared and the form was garbled). Run tte directly so the tracked PID is tte's own, and killing it actually stops the animation before the screen is cleared. Co-Authored-By: Claude <noreply@anthropic.com> * Don't let the killed animation abort provisioning under set -e wait on the tte PID reports its kill signal (143). Under set -euo pipefail that nonzero status aborted greeter_screen — and the whole service — right after Return, dropping first boot straight to the login screen instead of the keyboard step. Tolerate it with `|| true`. Co-Authored-By: Claude <noreply@anthropic.com> * Wait for the terminal size to settle before drawing the greeter A terminal emulator — or sudo's pty — reports a stale 24x80 for a few hundred milliseconds after the process starts, before its real winsize is set. The greeter measured immediately and fell into the 80x24 fallback, rendering small in the top-left instead of centered (the real first-boot console, already settled, was unaffected). Wait for stty to report a stable size at least as wide as the logo before measuring. Co-Authored-By: Claude <noreply@anthropic.com> * Fall back to the default font when the greeter console is too narrow scale_console_font sizes the console font from /sys/class/graphics/fb0, but virtio-gpu (notably virtio-vga-gl) can report a resolution that the console then settles below — leaving a font wide enough that an 81-column logo no longer fits (e.g. sun32 at a settled 1280px is 80 columns). The logo wrapped and hugged the top-left, with the animation tiling over it. After the greeter measures the settled size, if it is still narrower than the logo, drop to the default (narrowest) console font and re-measure so the logo always fits and centers. Verified by forcing an 80-column console: the fallback recovers it to 160 columns, centered, and provisioning completes. Co-Authored-By: Claude <noreply@anthropic.com> * Redraw the greeter on console resize instead of measuring once The first-boot greeter measured the console once, painted the logo and launched the tte animation, then blocked on Return. On a fresh deferred-provisioning boot under virtio-gpu the VT comes up in a transitional ~80x25 mode and only widens to the real resolution a second or more later, once KMS takes over (or, on virtio-vga-gl, the SDL window's size lands). The old settle-wait accepted that transient (two matching 100ms samples was enough), so the greeter committed to an 80-column geometry. When the VT then resized, Linux scrolled the stranded frame into the top-left and reset the DEC saved cursor tte paints from with --reuse-canvas — the small, top-left, tiled/garbled logo. The earlier "fall back to default8x16 when cols<81" fix couldn't help: if the console genuinely offers 80 columns, re-applying the narrowest font still leaves 80. Treat a resize as a redraw trigger instead. greeter_screen now: - waits for a real quiet period (console signature = VT size + framebuffer identity/size held steady ~1.5s) before the first paint; - sizes the font empirically — apply each candidate, read the columns fbcon actually returns, keep the one nearest ~48 rows that still clears the 81-column logo — rather than trusting fb0/virtual_size, which under virgl can report a size the text console never reaches; - paints from a nested _greeter_draw and, while waiting for Return, watches SIGWINCH and the console signature; on any change it kills tte, settles, re-fits the font, and repaints — so a resize arriving five seconds in looks the same as one that never happened; - draws each logo row at an explicit column and falls back to a centered text-only greeter (no logo, no animation) when the console is narrower than the logo, so a still-transient mode never wraps it into mush; - runs tte at canvas-width cols-1 to stay off the autowrap column. Verified the resize path in a tmux pane (a resizable pty): narrow first paint falls back to centered text, and each later resize repaints a correctly centered logo, with a clean exit on Return. Co-Authored-By: Claude <noreply@anthropic.com> * Ask the owner's timezone at first boot and hand off straight to Omarchy Three changes to the deferred first-boot setup: - Timezone: deferred provisioning skips the installer's user step entirely (it defers user creation to first boot), but the first-boot form only re-asked username/password/name/email — the timezone picker was never carried over, so every deferred machine silently kept archinstall's UTC default and the owner was never asked. Add the timezone step to the first-boot user form (geo-guessed default via tzupdate, same as the ISO installer's user step), show it on the confirmation screen, and apply it during provisioning with timedatectl. - Rename the progress-screen title from "Setting up your account" to "Setting up your machine": first boot provisions the whole machine, not just an account. - Drop the timed "Installed Omarchy in Xm Ys" celebration screen and the "Start Omarchy Now" button from first boot. That send-off belongs to a direct install; here the oneshot service just hands straight off to SDDM (Before=display-manager.service), which autologins on encrypted installs. A brief "Starting Omarchy..." covers the handoff. Co-Authored-By: Claude <noreply@anthropic.com> * Autologin only the first deferred boot on unencrypted installs The owner authenticates in the first-boot form, so setup hands straight into the desktop instead of asking again at SDDM. Encrypted installs keep autologin permanently (the LUKS prompt is the auth boundary); unencrypted installs autologin just this once and a self-removing service deletes the drop-in after the desktop is up, so later boots use the normal SDDM login and the disk isn't left permanently open. Co-Authored-By: Claude <noreply@anthropic.com> * Ask the owner's hostname at first boot too Deferred provisioning no longer bakes a hostname into the install, so add the hostname to the first-boot user form (same letters/digits/dashes validation as the ISO installer's user step, defaulting to "omarchy" on empty), show it on the confirmation screen, and apply it with hostnamectl during provisioning — alongside the timezone step. Co-Authored-By: Claude <noreply@anthropic.com> * Let the greeter logo appear from the animation, not a static pre-render The greeter drew the logo statically in green and then started the tte ColorShift over the same rows, so the logo visibly flashed as tte's first frame repainted it. ColorShift shows the full logo on frame one (it's a color effect, not a type-in), so let tte paint the logo itself: skip the static render when tte is available (keep it only as the no-tte fallback). The logo now simply appears, already animating, with no flash. Co-Authored-By: Claude <noreply@anthropic.com> * Drop the greeter color animation; show the logo in solid green The greeter "flash" was tte's ColorShift crushing on the framebuffer console: tte emits 24-bit truecolor, the console only has 16 flat colors, and consecutive frames' greens snap to different buckets (green/bright-green/cyan/ gray) — a frame-to-frame judder. A smooth color fade is impossible on the console (no blending), so the animation can't be made clean there. Show the logo in solid green (indexed color 2, which renders stably) with no animation. The resize-redraw resilience stays; there's just no tte to tear down now. Co-Authored-By: Claude <noreply@anthropic.com> * Fix first-boot review findings: autologin-once ordering, offline timezone Review of the deferred first-boot flow surfaced two real, user-facing bugs: - Autologin fired twice on unencrypted installs. The one-shot cleanup unit was ordered After=display-manager and enabled via a graphical.target.wants symlink + daemon-reload during the first boot — but graphical.target's job for that boot is already computed, so systemd never pulled the new unit in. It only ran on the *second* boot (which also autologged in) and removed the drop-in there. Order it Before=display-manager instead (and drop the sleep fudge): this boot autologins, the next boot's fresh transaction runs the cleanup before SDDM reads its config, so that boot shows the normal login. Exactly one autologin, deterministic, no race. - Offline first boot aborted setup. `geo_guessed_timezone=$(tzupdate -p)` is a plain assignment under `set -e`, and tzupdate exits non-zero with no network — the common case for a fresh machine — killing the attempt before the offline gum-filter fallback. Guard it with `|| geo_guessed_timezone=""`. Also: configure_timezone no longer symlinks /etc/localtime to a nonexistent zone file on a bad zone (guards on the zoneinfo file existing); scale_console_font's stty-size fallback emits a trailing newline so `read` can't trip `set -e`; and drop two stty-sane calls that only existed to recover from tte's raw mode (tte is gone). Co-Authored-By: Claude <noreply@anthropic.com> * Seed placeholder hostname/timezone in deferred install, overwrite at first boot Simpler than the empty-string approach: instead of writing hostname=""/timezone="" and having the orchestrator fall back, the deferred install now seeds neutral valid defaults (hostname=omarchy, timezone=UTC) and the first-boot wizard overwrites both. Identical end state, one decision in one place, and no reliance on archinstall accepting empty config values. Runtime comments updated; the configure_* functions are unchanged (they still overwrite whatever was seeded). Co-Authored-By: Claude <noreply@anthropic.com> * Bring back the greeter ColorShift animation Reverts the "drop the color animation" change — the framebuffer's truecolor crush gives the ColorShift a quick flash, but that's acceptable; removing the effect entirely was overreach. Restores the static green logo + looping tte ColorShift overlay (green base, cyan accent, settling on green), keeping the resize-redraw resilience and every other fix intact. Co-Authored-By: Claude <noreply@anthropic.com> * Hide the omarchy-provision-* commands from the listing These run from services and install hooks (first-boot provisioning, per-user finalize, first-login) — never something a user invokes directly. Mark them omarchy:hidden=true and drop the group/examples that implied a user-facing route. The binaries still work when called directly by their callers. Co-Authored-By: Claude <noreply@anthropic.com> * Hide the factory-reset first-boot worker from the listing omarchy-system-factory-reset-finish runs from a first-boot service after a reset — never invoked by hand — so hide it like the provision workers. omarchy-system-factory-reset itself stays visible (Setup > Reset Computer). Co-Authored-By: Claude <noreply@anthropic.com> * Address final-review findings: LUKS fail-open, set -e aborts, drop-to-console Codex xhigh final pass surfaced several real issues; the contained ones: - LUKS re-key could fail open (security). If the user's slot couldn't be identified, or luksDump/luksKillSlot failed, the code shredded the staged key anyway while the throwaway/seller slots stayed valid — leaving the disk unlockable by the install passphrase forever. Now it's all-or-nothing: require the user's slot, enumerate and kill every other slot, and only retire the staged key once all kills succeed; otherwise fail loudly and keep it for retry. - Greeter animation cleanup: `kill "$anim"` was unguarded, so if tte had already exited (crash or resize race) it returned non-zero and `set -e` aborted setup, dropping to SDDM with no user. Guard it with `|| true`. - reset_limine_config: `old_ids=$(grep ... | ...)` on an entry-less limine.conf (left by a failed rebuild) exits 1 under pipefail and aborted the retry. Guard with `|| true` so a rebuild failure stays recoverable. - "Drop to console" on a failed setup exited to nothing usable (no user, root locked, tty1 getty conflicted). Exec a root shell on tty1 instead; SDDM starts when it exits. Co-Authored-By: Claude <noreply@anthropic.com> * Drop Bosnian and Khmer from the keyboard picker Neither has a console keymap (loadkeys ba / loadkeys khmer both fail), so picking them showed the choice as confirmed but silently left the system on the default US layout. Remove them from the first-boot picker rather than offer a layout that can't apply. The orchestrator keeps its defensive unsupported-keymap handling for install-time robustness. Co-Authored-By: Claude <noreply@anthropic.com> * Finish the omarchy-first-run rename in the docs Two doc references to omarchy-first-run were missed when the script was renamed to omarchy-provision-first-run; update them to match. Co-Authored-By: Claude <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
6fa4f78ee1 |
Add deferred first-boot provisioning and factory reset (#6621)
* Add OEM first-boot setup and factory reset An OEM-mode ISO install (or omarchy-reset-computer) leaves the machine in OEM state: fully installed, no user, /var/lib/omarchy/oem/pending armed. On the next boot omarchy-oem-setup.service runs the configurator's user form on tty1, creates the user with the groups system setup recorded, finalizes it offline from the stashed Node tarball, re-keys LUKS from the throwaway install passphrase to the user's password, and hands off to SDDM. omarchy-reset-computer returns a machine to that state: it swaps the running root for a fresh clone of the @factory snapshot the ISO takes at install time, scrubs machine identity and prior users, and stages omarchy-factory-wipe to drop the old root and recreate @home/@log on the next boot. Machines installed before @factory existed get a degraded reset (current system kept, users and state wiped) with that caveat surfaced in the confirmation. omarchy-setup-system/-hardware gain --oem to run without an install user; the group-granting install scripts now record their groups in /var/lib/omarchy/oem/groups and only call usermod when the user exists. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Harden OEM setup: correct cryptsetup key-file usage, retry on failure cryptsetup reads --test-passphrase/--key-file inputs byte-for-byte, so feed passphrases through process substitution consistently instead of positional args or stdin (which has different newline semantics). Run each first-boot setup attempt as its own process so a failure offers a retry instead of stranding the machine at a user-less login screen — bash ignores errexit inside `while !` conditions, a child process does not. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Always grant wheel sudo in OEM first-boot setup Detecting an existing %wheel grant by grepping sudoers is error-prone: omarchy ships narrow '%wheel ALL=(ALL) NOPASSWD: <command>' rules (e.g. asdcontrol) that match the naive pattern, which left the OEM-created user matching sudoers entries but unable to run anything. Write the drop-in unconditionally — a duplicate of an existing full grant is harmless. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Fix LUKS re-key device resolution and OEM state readability archinstall's encrypted installs put cryptdevice=PARTUUID=... on the kernel cmdline, not UUID=, so the first-boot re-key never found its device and silently skipped — leaving the throwaway auto-unlock keyfile in place, i.e. the disk effectively unencrypted. Parse every cryptdevice= source spec form and make any re-key failure abort the attempt loudly: a retry prompt beats a machine that quietly boots without a passphrase forever. The OEM state directory also has to be world-readable (its one secret, luks-key, stays 0600): user finalization reads the stashed Node tarball as the new user, and the 0700 directory forced it onto the network fallback. Step markers now land in /var/log/omarchy-oem-setup.log for debuggability. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Purge stale machine-id boot entries when resetting or re-keying limine-entry-tool keys its limine.conf OS entries by machine-id. A factory reset gives the machine a fresh identity, so the previous system's entry survived every rebuild, sorted first, and made Limine stop at a Blake2b hash-mismatch warning once the UKI was rebuilt. Start limine.conf over from the shipped template (and drop foreign machine-id history directories on the ESP) before any post-reset rebuild: in the staged chroot rebuild, in the first-boot LUKS re-key, and — for unencrypted resets, where nothing else rebuilds — in a dedicated first-boot refresh when foreign entries are found. The staged rebuild also verifies every UKI hash referenced by limine.conf against the file on the ESP before the subvolume swap, and the running system's limine-snapper-sync is runtime-masked during staging so it cannot rewrite the config behind the rebuild. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Harden reset and first-boot setup failure paths Review findings from codex and Copilot: - Generate throwaway passphrases without a trailing head stage: under pipefail, SIGPIPE from the infinite tr failed the substitution and errexit aborted every encrypted reset before it could stage anything. - Stage the fallible parts of a degraded reset (LUKS re-key, boot rebuild) before arming the wipe, so a staging failure leaves the machine untouched instead of scheduling a wipe for a reset that never finished. - Gate first-boot setup on the factory wipe having succeeded (ConditionPathExists=!wipe-pending plus an in-script guard): creating the new user on a half-wiped system would hand their data to the wipe retry. - Abort the wipe (keeping its retry marker) when deleting the old root or recreating @home/@log fails, and abort resets that cannot remove a prior account — a surviving account keeps its password and wheel membership. - Resume a partially-created account on setup retry instead of rejecting the username the failed attempt just created. - Only purge machine-id directories the old limine.conf actually referenced; a shared ESP may hold other installations' boot artifacts. - Recreate the hibernation swapfile (nested subvolume, so never captured by the factory snapshot) inside the factory root before its UKI rebuild, so a reset machine keeps disk-backed swap and a valid resume offset. - Source base-test.sh in the OEM groups test per test conventions. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Recreate the hibernation swapfile even when resume drop-ins survive omarchy-hibernation-setup short-circuits as 'already set up' when the resume mkinitcpio drop-in exists — which it always does in a factory root, while the swapfile itself never survives the snapshot (nested subvolume). Drop the marker when the swapfile is gone so setup reconfigures from scratch, and verify the swapfile actually exists before proceeding with the reset. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Second review pass: encrypted-config coverage, factory-baseline sanitization, recoverable rekey Codex xhigh round 2: - Detect the LUKS backing device by walking the root's device tree, not only the cmdline cryptdevice=; reset/first-boot now re-key roots reached via rd.luks/crypttab too, instead of silently leaving the seller's slots valid. - Sanitize the retained @factory baseline (accounts, /etc/shadow, machine identity) during a full reset: the new wheel user could otherwise mount it to recover the seller's data, and a second reset would restore the account. - Re-key the disk recoverably: rebuild the no-auto-unlock UKI before killing the throwaway slot or destroying the staged key, and restore the keyfile if that rebuild fails, so a retry with a different password can never leave the disk locked to the first attempt's password. - Roll back a degraded reset's live-root auto-unlock material if its boot rebuild fails, instead of leaving it for a later rebuild to embed. - Treat a missing current-machine limine entry as stale so a retry after a failed rebuild repairs the config instead of clearing OEM state over it. - Erase fingerprint enrollments (/var/lib/fprint) in degraded wipes. - Remove the resume-offset drop-in too when recreating the factory swapfile, so the rebuilt UKI gets a correct offset. - Pin first-boot retries to the account the first attempt created. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Expose factory reset in the Setup menu Add a 'Reset Computer' entry under Setup (Omarchy's Settings menu, where OS factory resets conventionally live), guarded to btrfs roots and launched in a floating terminal. omarchy-reset-computer now self-elevates via sudo so the menu entry needs no sudo prefix, forwarding the caller's gum theme env as env arguments so styling survives an env_reset sudoers. The typed 'reset' confirmation and the sudo password prompt remain as the guards against accidental triggering. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Defer keyboard selection to first boot for OEM installs The OEM first-boot setup now runs a keyboard step before the user form, mirroring the ISO configurator: it loads the chosen layout on the live VT so the password (and the LUKS re-key that follows) are typed under it, and persists it with systemd-firstboot so the installed system gets both the console KEYMAP and the XKB layout Hyprland reads — exactly what a normal install writes. Layouts localectl doesn't know keep the default, same as the installer. This lets the OEM operator set nothing user-specific: the machine's owner picks their keyboard alongside their account at first boot. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Rename factory-reset commands to omarchy-system-factory-reset[-finish] omarchy-reset-computer -> omarchy-system-factory-reset omarchy-factory-wipe -> omarchy-system-factory-reset-finish (and its systemd unit, log path, and temp mount to match) Pure rename: every reference — the Setup menu action, the first-boot finish service the reset stages and enables, the oem-setup ordering/gating, comments, and the menu test — moves together, with no behavior change. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Rename OEM vocabulary to provisioning (runtime) Commands unify under the provisioning family: omarchy-oem-setup → omarchy-provision-owner omarchy-finalize-user → omarchy-provision-user omarchy-first-run → omarchy-provision-first-run And the deferred-provisioning state/vocabulary replaces 'OEM': /var/lib/omarchy/oem/ → /var/lib/omarchy/provisioning/ /etc/omarchy/oem.key → /etc/omarchy/provisioning.key install/oem/ → install/provisioning/ OMARCHY_SETUP_CONTEXT=oem-firstboot → provision-owner omarchy-setup-system/-hardware --oem → --defer-provisioning All callers (provision-first-run→provision-user, autostart, factory-reset staging the provisioning units, the group-recording scripts) and comments move together. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Drop remaining OEM mentions from the provisioning groups test Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Finish the omarchy-first-run rename in the docs Two doc references to omarchy-first-run were missed when the script was renamed to omarchy-provision-first-run; update them to match. Co-Authored-By: Claude <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
9b03f15b4f |
Detect Elan match-on-chip fingerprint readers again (#6578)
* Detect Elan match-on-chip fingerprint readers again Elan readers report "ELAN:ARM-M4" as their product string, so the *fingerprint* and *biometric* checks miss them. Elan's 04f3 is also left out of the vendor list on purpose, because Elan makes touchscreens too. Both checks fail, so the machine looks like it has no reader. Add "elan:arm-m4" to the product string check. The comment above the vendor list already says the excluded vendors should still match there, so this makes that true. The vendor list and its has_kernel_driver guard are unchanged, and touchscreens still cannot cause a false positive. The string is a family name, not one device. libfprint uses it for 04f3:0c9c and 04f3:0ca7 as well as 04f3:0ca8. Tested on an HP EliteBook X G2i with 04f3:0ca8. * Point the Elan comment at the vendor list above it Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Configure PAM only after a fingerprint enrolls and verifies Detection proves a reader is present, not that libfprint can drive it. Elan MOC sensors outside the elanmoc table pass the gate and then fail to enroll, which left pam_fprintd in the sudo and polkit stacks with no print to match. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: David Heinemeier Hansson <david@hey.com> Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
e1d0c4e0a8 |
Ship the keyboard layout widget on the bar and make clicking it work (#6659)
* Hide the keyboard layout widget on a single-layout install There is nothing to read or switch when only one layout is configured, so the label is noise on the bar most people have. Hide it until the keyboard reports more than one, and keep showing it on a Hyprland that doesn't report the list at all rather than hiding the widget everywhere. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Put the keyboard layout widget on the bar by default The widget hides itself unless the active keyboard has more than one layout, so shipping it costs a single-layout machine nothing and saves everyone else from finding it in the plugin list. Sit it just right of the clock, and add it to existing bars the way the agents widget was added, leaving a curated bar and a disabled widget alone. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Cycle the layout with the hyprctl command that exists switchxkblayout is a hyprctl command, not a dispatcher, so sending it over the dispatch socket only produced a Lua syntax error and clicking the widget did nothing. Run it instead, against the keyboard the label was read from. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Add an idempotent bar add command Nothing put a widget on the bar without going through the running shell: plugin enable and bar move both forward to it over IPC, which a migration cannot rely on. Add writes the config file the way position and transparent already do, and leaves a widget that is already on the bar where the user put it, so callers can ask for it repeatedly. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Put the keyboard layout widget on bars through the bar CLI The hand-written jq was a normalizer, a presence check and a splice for what is now one command that carries all three. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Keep bar add from writing a bar the shell was not reading The shell takes a user shell.json only when it parses, says version 1, and carries a bar layout, and does not deep-merge; anything else leaves the shipped defaults on screen. Reading and writing the user file regardless turned a config holding nothing but an idle timeout into a bar holding nothing but the new widget, and made an unparsable one abort the migration chain on every update. Work against whichever layout is actually in effect, seeding the defaults before placing a widget they do not already carry. A malformed hand-installed manifest fails the whole plugin catalog, which was enough to refuse a first-party widget, so treat an unreadable catalog as no answer rather than a no. Leave a widget listed in disabledPlugins off the bar instead of writing a layout entry the registry refuses to load, and re-check presence inside the mutation so two adds cannot both miss it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Read a widget's default bar section in one place cmd_defaults spelled out the same "defaultSection, or center when it is missing or not a section" rule that the add path already asks for by name. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Rename bar add to bar put 'omarchy plugin add' installs a plugin and 'omarchy bar add' placed one that was already installed, which is too much meaning for one verb. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Place a newly added bar widget with bar put plugin add reached the bar through plugin enable, which forwards to the running shell, so it first had to poll until the shell noticed the clone and then failed outright when no shell was there to ask. Putting a widget on the bar is a config edit, so do that directly and leave plugin enable to the plugins that need registering rather than placing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Put bar widgets through the shell instead of the config file Placing a widget existed twice: once in PluginRegistry, which the shell uses and owns the config it holds in memory, and once as jq against shell.json. The second was there so migrations could run without a shell, which they do not need to: the Quattro upgrade hands over the shipped shell.json before it runs any, and every other path runs inside a session with a shell up. Ask the shell, and say so and carry on when there is none to ask. putBarWidget enables only what is not already on the bar, which is what a caller that cannot know whether it ran before needs, and is the one thing the existing enable path would not do. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
6ddc39520d |
Clean up the terminal and reconnect when SSH connections drop (#6661)
* Clean up the terminal and reconnect when SSH connections drop A remote tmux, herdr, or editor arms terminal modes over the SSH pipe (mouse tracking, focus reporting, the alternate screen) that only it can disarm. When the connection dies instead of exiting cleanly, those modes stay armed on the local terminal, and every mouse move floods the prompt with escape-sequence junk. Wrap ssh in a shell function that disarms those modes after every exit, and automatically reconnects when an established interactive session drops. Remote commands, configured RemoteCommands, and redirected stdin never reconnect, so their side effects cannot replay, and the retry loop runs in a subshell so Ctrl-C cancels both the in-flight attempt and the loop. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Detect dead SSH connections within a minute Without keepalives, ssh does not notice a dead peer until TCP gives up, which can take hours of sitting on a hung terminal with remote-armed terminal modes stuck on. Ship a client keepalive default so drops are detected in about 45 seconds, letting the shell's ssh wrapper clean up and reconnect. ~/.ssh/config is read first and wins, so per-host overrides still apply. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Fail closed when ssh -G cannot resolve the effective config An unresolvable configuration could hide a RemoteCommand, so treat it as non-interactive rather than reconnectable. Also strengthen the tests from Copilot review: assert the complete disarm sequence, and verify on a real interactive pty that Ctrl-C during a retry attempt kills the reconnect loop itself, not just the in-flight attempt. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Tolerate the explicit RemoteCommand none when probing ssh -G The literal "none" is how ssh_config cancels a configured RemoteCommand, and some OpenSSH versions emit it even when unset, which would have silently disabled reconnecting entirely. Treat it as no remote command while still failing closed on real ones and unresolvable configs, and make the fake ssh -G emit the "none" form so the behavior tests cover it. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
9d61915b2e |
Fix KeyboardLayout plugin label permanently displaying ENG on some systems (#6646)
* Fix hyprctl output parsing in KeyboardLayout plugin * Never fall back to a non-active keyboard for the layout label find(k => k.main) returning nothing fell through to keyboards[0], which is the case the fix is for: on hardware whose first device is a permanently English (US) radio-control keyboard, the label was wrong and the 10s poll kept it wrong. The seat can also hold no active keyboard while a device is re-added, and older Hyprland has no main field at all. Keep the last known value instead, and skip entries without an active_keymap, since assigning undefined to the string property throws before the label is ever set. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Run hyprctl directly from the keyboard layout widget The shell wrapper only existed for a pipeline that is gone, so spawn the command directly, as Style.qml already does for its own hyprctl query. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Read the layout from the keyboard the user types on Every Omarchy install runs fcitx5 for ~/.XCompose, and it binds a virtual keyboard that takes the seat's main flag whenever it injects. That keyboard keeps the us layout the input method gave it, so on a machine configured for another layout the widget flipped to ENG and the poll kept it there until the next physical keypress. Skip virtual keyboards and hold the last known layout instead, which the next poll corrects once a real keyboard is active again. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Keep tracking the keyboard the layout was last read from Holding a frozen label while fcitx5 owns the main flag went stale as soon as the layout changed underneath it, and cycling still dispatched against "current", which is that same virtual keyboard. Remember the keyboard the label came from, re-read its layout on every poll, and cycle it by name so the widget shows and switches one device. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: David Heinemeier Hansson <david@hey.com> Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
f511cf8642 | Hide herdr's outer pane frame like tmux | ||
|
David Heinemeier Hansson
|
ba7925afd8 | Carry tmux's tab moves, zoom flag, and hostname into herdr | ||
|
David Heinemeier HanssonandClaude Opus 5
|
e4a8e01409 |
Tag foot's other app-id as a terminal
The class is matched in full, so the bare "foot" alternative never covered a window carrying org.codeberg.dnkl.foot. That left universal copy sending CTRL + C into a terminal, the same way it did for the Omarchy TUIs. default/hypr/apps/system.lua already treats that app-id as a foot window. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
c4dda58ba2 |
Stop the clipboard picker freezing on huge pastes (#6568)
Every keystroke in the search box scanned, lowercased, and split the full text of every history entry, and the preview pane laid out the entire selection with WrapAnywhere. A single 1.6MB paste (or a large file selection) turned that into hundreds of megabytes of work on the shell thread and stalled the render thread — freezing the whole desktop. Cap each entry once as it enters the display, so searching, previewing, and rendering all work on a bounded prefix. Pasting reads the full entry back from history by index, so nothing is actually lost. The cut lands on a line break, keeping a file:// URI from truncating into a bogus path. Co-authored-by: markbusking <marcosbustos.dev@gmail.com> Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
dd61d4a75b |
Ship herdr alongside tmux (#6406)
* Ship herdr with a config that mirrors our tmux setup Installs herdr through the mise shim, ships the matching config as an Omarchy default, and adds the usual refresh/restart pair. The keybindings map tmux sessions to workspaces, windows to tabs, and keep both the prefix and direct bindings from config/tmux/tmux.conf. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Add herdr versions of the tmux dev layout functions hdl, hds, hdlm, and hsl drive herdr through its socket API instead of tmux. hsl tiles into a real grid since herdr has no select-layout tiled. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Namespace the herdr layout helpers so they stay out of the shell Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Create hdlm's tabs in its own workspace instead of the focused one herdr tab create follows the focused workspace without --workspace, so switching workspaces while hdlm loops scatters the new tabs. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Lay hsl's grid out in visual order Splitting the first column repeatedly inserted each new column between it and the previous one, so uneven counts put the spare row in a middle column instead of the last. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Report herdr config reload failures instead of swallowing them Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Hide herdr's pane scrollbars to match tmux Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Escape queued herdr layout commands * Install herdr from the omarchy-herdr package instead of mise * Use native herdr resize keybindings for tmux-style pane resizing * Rename the omarchy-herdr package to herdr --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
19572a13c7 |
Skip compositor tests without recording a failure
Two problems made a missing Wayland compositor look like broken tests. The cleanup traps ended on a bare conditional, so when a test skipped before creating its TMPDIR the trap's last command returned 1 and, under set -e, that overrode the explicit exit 0. Six tests that launch quickshell had no compositor guard at all, so they ran anyway and failed on the Qt platform plugin. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Luke HsiaoandGitHub
|
0795ede770 |
Fix invisible Helix cursorline, ruler, and picker highlights (#6638)
|
||
|
|
2a0c7371a5 |
Claude collector: attribute pi usage by provider, not api prefix (#6655)
Pi/omp sessions kept falling into the Claude record when the api field merely started with 'anthropic'. Kimi and other providers that speak the anthropic-messages protocol (kimi-coding) were therefore charged against Claude Code, showing k3 buckets under a Claude tab even for a user without a Claude login. Match the codex collector's provider-only attribution: only sessions whose provider is exactly 'anthropic' count toward Claude usage. Add a test proving a kimi-coding session sharing the anthropic-messages api does not land in the Claude record. Co-authored-by: Luca <luca@itwasarch> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
8be0ca9d43 |
Expect Tailscale on the right in the bar defaults test
|
||
|
|
e4d85bd037 |
Keep concurrent usage collectors off one shared temp file (#6654)
Two Claude collectors running at once both wrote the cache through a temp path derived from the target, so the second replace found the file already moved away and crashed the update with a FileNotFoundError. Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
f8c235a5e4 |
Read /boot as root when looking for the Omarchy UKI (#6653)
* Find the Omarchy UKI as root when setting up direct boot /boot is mounted with dmask=0077 on encrypted installs, so the unprivileged find returned nothing and direct boot always reported that no UKI was present. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Check for the legacy UKI as root when refreshing limine The unprivileged file tests were always false on encrypted installs, so the stale <machine-id>_linux.efi was never cleaned up. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
1ded25fd45 |
Make a dead lock client diagnosable and recoverable (#6630)
* Persist the Omarchy shell log across sessions Quickshell only logs to its instance runtime dir on tmpfs, so when the shell dies the idle/lock event trail is gone after a reboot (#6628). Launch the shell through omarchy-launch-shell, which pipes stdout/stderr into the journal under the omarchy-shell tag — bounded, timestamped, and persistent — and surface that log in omarchy-debug-idle. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Recover a locked session whose lock client died When the shell dies while the session is locked, Hyprland's failsafe keeps the session locked with no lock client left, and omarchy-restart-shell refused to run in exactly that state, leaving reboot as the only way back in (#6628). Gate the refusal on the lock service actually holding (or acquiring) the lock rather than on the session's LOCK state — a dead shell and a crash-handler relaunch that holds no lock both fail that check — then restart the shell, re-acquire the session lock, and wait for it to report secure, the same secure-poll omarchy-system-sleep-lock uses, so the user can authenticate out of the failsafe. Enable Hyprland's allow_session_lock_restore so the compositor accepts the replacement lock client. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
3aa7c1ee13 | Rename menu | ||
|
Bohdan WynnyckyjandGitHub
|
a0dbd900c2 | Add battery percentage menu entry (#6640) | ||
|
David Heinemeier Hansson
|
4d29cbbb66 | Use shared speed test dial scale | ||
|
|
5a58f79876 |
Keep clicking a notification working after a shell restart (#6636)
* Keep clicking a notification working after a shell restart Notification actions lived only in the sending process: `-a` appended `-A default=default`, so notify-send blocked on a D-Bus ActionInvoked signal and the caller ran the command when it arrived. Nothing about that reached disk, so a restored popup had no action to run and its sender stayed blocked forever. Replace `-a` with `--exec <command>`, carried as an `omarchy-exec` hint into the snapshot's `exec` role. It travels through the popup files and history, and the shell runs it on click, so restored toasts behave exactly like live ones and the sender exits immediately. That drops the scaffolding whose only job was keeping a blocked sender alive: the first-run invitations lose their `--show` re-entry and two transient units each, omarchy-migrate-notify loses its transient service, and the screenshot, recording, download, and taildrop toasts lose their wrapper subshells. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Keep a failed toast from failing the work it announces Moving these sends out of their backgrounded subshells put a fallible command on the foreground path, where the `&` used to swallow its exit status. A notification outage — including the shell restart this branch targets — now propagates: - taildrop's receiver dies under `set -e` mid-delivery - omarchy-capture-screenshot reports failure for a screenshot it already saved - a completed download exits before scheduling its thumbnail cleanup, leaking the mktemp file Announcing is best-effort in all three: the work is already done by the time the toast goes out. Also drop the first-run sleep that spaced out the welcome and Wi-Fi toasts. It compensated for the background notify-send processes this branch removes; each send now returns only once the server has taken the toast, so sending in order is enough to stack them newest-on-top. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * Stop tying the preview cleanup to the toast's expiry The shell loads a notification thumbnail into memory when the toast appears and never re-reads the file, so the preview only has to outlive that load. Deriving the cleanup delay from the expiry was false precision, and it turned -t into a variable for no reason: -t is already the helper's expiry setting. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
99293aa05a |
Place the Tailscale bar widget on the right
Without defaultSection, both 'omarchy bar defaults' and 'omarchy plugin add' fall back to center, so upgrades landed Tailscale next to the clock instead of alongside the other status widgets. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
|
b925431025 |
Give SSH commands the user-level tool paths (#6632)
* Give SSH commands the user-level tool paths
ssh host cmd runs neither a login nor an interactive shell, so on Arch it
gets the bare sshd PATH and can't find mise-managed tools like the agent
CLIs herdr scans for. Set PATH in the PAM environment (per-user via
@{HOME}), append the user-level dirs in env-bootstrap so login shells and
the uwsm session get them too, and source env-bootstrap before bashrc's
interactive guard for bash variants that read it non-interactively.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Don't let an empty PATH turn into a cwd entry
Appending with a bare "$PATH:" prefix leaves a leading colon when PATH
is unset, which shells treat as the current directory.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
|
||
|
David Heinemeier HanssonandClaude Opus 5
|
ab367b9477 |
Stop mise wrappers from waiting out the release cooldown
The wrappers install and upgrade their tool on first run, so the cooldown held new versions back for days. Refresh the stubs on existing installs too, since the generator change alone only reaches fresh installs. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier HanssonandClaude Opus 5
|
76117fb8ba |
Take mise tool updates without waiting out the release cooldown
mise withholds releases younger than its cooldown, so omarchy update left tools behind for days. The mup alias already bypassed it by hand. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
David Heinemeier Hansson
|
366b789be1 |
Revert "Nicer with an extra CR here"
This reverts commit
|
||
|
David Heinemeier Hansson
|
a3aa3c9e82 | Nicer with an extra CR here | ||
|
David Heinemeier Hansson
|
48c17bb644 | mise already gives the CR needed | ||
|
David Heinemeier Hansson
|
412f6acb74 | Don't need the extra CR |