The dial already grouped its digits for the locale above 10, but below 10 it
went through toFixed, which hardcodes a dot. A German desktop therefore read
9.5 and 1.235 off the same dial, switching decimal convention halfway up the
scale.
Send both branches through the locale. A reading is a measurement rather than
interface text, so its separators follow the system's number conventions even
though the interface itself stays English.
English output is unchanged.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
* Extract the speed test gauge cluster into a shared SpeedTestOverlay
The dial cluster -- scrim, ignition sweep, self-ranging dials, run-again
button -- moves from the network speed test panel into qs.Ui with the
labels, unit, title, scale stops, and layer namespace as parameters, so
other measurements can wear the same cluster. The network panel keeps
its process handling and becomes a thin dressing of the overlay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add a disk speed test and move speed tests under Trigger > Tests
omarchy-disk-speedtest streams live write and read MB/s once a second by
sampling the backing block device's kernel I/O counters while dd workers
generate the traffic, the same way the network test samples the
interface counters. The stress data is an incompressible urandom chunk
staged in RAM, written with fdatasync per pass and fadvise drop-behind:
O_DIRECT silently falls back to the page cache on btrfs, and zeros never
reach a compressed filesystem at all. Scratch files are created
exclusively per invocation and removed even when a dismissal interrupts
the run mid-phase.
The omarchy.disk-speedtest panel dresses the shared SpeedTestOverlay
with write and read dials in MB/s, titled with the hardware model of
the disk under test.
The menu grows a Trigger > Tests submenu holding the new Disk Speed
Test and the Network Speed Test, which moves there from Setup > Network.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make the disk speed test reproducible, direct, and read-first
Successive runs could swing 40% because the settled figure was just the
last one-second sample of a single buffered dd stream, taken while btrfs
copy-on-write churned the extent allocator on every rewrite pass and the
fadvise cache-eviction dance stayed advisory.
The test files are now marked NOCOW, which is what makes O_DIRECT truly
direct on btrfs -- with checksums on it silently falls back to the page
cache -- and lets every rewrite land in place. Four parallel workers per
phase give the device a queue depth it can stretch out on, and the
figure the dial settles on is the steady-state average over the whole
phase with the first warm-up second excluded, not whatever rate the
final second happened to catch. Together this tightens successive runs
from +/-40% to a few percent of each other, at the device's actual
spec throughput.
The read phase now runs first, staged against freshly written files,
with the read dial on the left. Workers also only loop while the main
script lives, so a dismissal that loses the kill race can no longer
leave an orphan hammering the disk forever, and any worker dying before
the deadline fails the run instead of passing off partial figures.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the menu aliases from the speed test entries
Aliases are reserved for established alternate names users already
type, kept for compatibility -- not something new entries pick up by
default. Note that in the menu definition header and AGENTS.md so the
next entry doesn't repeat it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Group dial readouts with thousands separators
A gen5 disk reads five digits; 11,450 scans, 11450 doesn't. Uses the
locale's grouping separator.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Trim redundant overlay props and unused imports from the speed test panels
The network panel restated the overlay's default unit and scale stops,
and both panels carried imports and an omarchyPath property nothing
uses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Publish the specific speed test error whichever handler fires last
Process exit and stderr stream-finished have no guaranteed order, so a
failure that beat the collector showed the generic message forever even
when the command emitted an actionable one; the collector now replaces
it once the text lands. Also stop clearing the error on every stdout
line: only a new run should do that, or buffered output delivered after
a failed exit erases the failure message.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Arm the disk speed test cleanup before any scratch file exists
A preflight failure -- tmpfs target, missing device statistics, not
enough free space -- exited between mktemp and the trap, leaking the
scratch files. Cleanup also now unlinks before stopping the workers and
sweeps once more after, so even a cleanup cut short by an impatient
SIGKILL leaves no names behind and a final worker pass cannot recreate
one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Hyprland leaves an already-mapped layer surface at its old global
position when its monitor moves within the layout: undocking disables
the internal panel, the external monitor shifts to x=0, and the bar and
background keep rendering at the old offset until unmapped and remapped.
Watch each screen's origin and briefly unmap the window when it moves so
the compositor re-places the surface at the monitor's new origin.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The widget declared no indicator hint, so the mark fell back to 55% of
the slot — sized for a lone icon, too short once the percentage doubles
the block. Hint the glyph's painted width, the way the clock hints its
label width.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Dismiss bar panels when clicking on another monitor
* Preserve keyboard focus for reopened panels
* Harden cross-monitor panel dismissal
* Wait for panel mapping before releasing focus
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Pins the active connection to 2.4/5/6GHz, or leaves the choice automatic.
The section only appears on Wi-Fi when the network answers on more than one
band, or while a pin is in force so it stays clearable.
bin/omarchy-network-band reports and sets the band. It sets NetworkManager's
802-11-wireless.band rather than pinning a BSSID: NM 1.44+ accepts a third
band value so 5 and 6GHz can be pinned apart, and a band survives an AP
rotating its BSSIDs while leaving roaming between APs intact. It refuses a
band the network does not answer on, and restores the previous setting if
reassociation fails rather than leaving the machine offline.
Under Automatic the pills collapse and the header reads the live band
("WI-FI BAND: 2.4GHZ"); pinning reveals them and the header goes plain. The
height is animated, and the section stays mounted through the reconnect a
band change causes -- otherwise `kind` briefly stops being "wifi" and the
whole segment would tear down and rebuild.
Two fixes to the same panel fall out of this:
- Every stat row stays mounted and reads "--" until it has data, instead of
appearing a beat after the panel opens and shoving the rows below down.
- The speed test's Run button is scaled to match the band header's controls
and joins the keyboard cursor chain.
ToggleSwitch gains a settable trackHeight so a compact placement can render a
genuinely small switch instead of scaling one down onto fractional pixels.
Defaults are unchanged.
Claude-Session: https://claude.ai/code/session_01XcKqYe1n5bnRBuAZwikwsr
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
JetBrainsMono Nerd Font draws 10% of the em above the ascent Text
reserves for it (yMax 1120 against ascent 1020), and a patched or
user-chosen family can be worse. In normal flow that sliver costs
nothing; at the top of a clipping list it is sliced off and the header
renders beheaded.
Reserving it in PanelSectionHeader covers every panel at once, rather
than each list working around it in its own geometry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Sliders only ever accepted the left button. Audio wants right-click as a
secondary action on the track, so emit rightClicked() for it and keep dragging
left-button-only: press and release both ignore anything else, so a right-click
can neither start a drag nor move the value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
A center-anchored module is mounted twice: the copy that is drawn, and a
zero-size placeholder holding its place in the flow beside the anchor.
findPanelWidget returned whichever registered first, and that order is
not stable across a live bar reconfiguration, so a panel could open
anchored to the invisible copy -- mispositioned, with the drawn slot
never lighting up and switchPanelFrom unable to find it again.
The mark was also always 55% of the slot, which fits an icon but
underlines only a fraction of a text label, and runs the full height of a
multi-line module on a vertical bar. Modules can now say how long the
mark should be along the bar; anything that does not answer keeps the old
proportion.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A bar surface is built per monitor, so a widget in the layout is live once
per screen — but an IPC target only ever routes to the handler that
registered first. `omarchy.indicators refresh` therefore reached a single
bar, and since indicators only re-read their state on that signal, the
other screens kept showing a stale reminder count, tmux alert, or DND
state until the next reload. Clock and system-update refreshes had the
same reach.
Let the bar resolve every live instance of a widget id and relay the call
to all of them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Accumulate sub-threshold movement so slow motion with a flat acceleration profile updates selection. Sample pointer state on row entry and carry pointer intent through subordinate menus while preserving predictable keyboard selection.
Optional tickCount cuts evenly-spaced marks into the track for stepped
sliders. Defaults to 0, so existing sliders are unchanged.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
TextField, NumberField, Dropdown, SearchableDropdown, and Toggle all
painted their background, border color, and border width with the same
three-line ternary ladder (`_focused ? focusFill : _hot ? hoverFill :
normalFill`). Five components × three properties × three branches is a
lot of room for one of them to drift from the others when a new state
ever gets added.
Add controlFill / controlBorder / controlBorderWidth on Style and rewrite
each call site as a single binding. No visual change.
OSD reimplemented clamp() inline when Util already has one.
PanelSlider's knob-scale binding read `mouseArea.containsMouse` directly
instead of going through a `_hot` like the other interactive controls
(TextField, NumberField, Dropdown). Mirror them so future style work
has a single property to override.
Five sites hardcoded "#cacccc" or "JetBrainsMono Nerd Font" as the
fallback when no bar context was available. Those magic strings are
the *current* palette defaults — they diverge silently when the theme
changes. Bind to the Color / Style singletons so the fallback tracks
whatever the theme says the foreground / monospace family should be.
Color.qml itself keeps the literal "#cacccc" — that's the seed value
the singleton is bootstrapped with before the theme loads.
Matches the BarWidget extraction in the previous commit. The weather
panel was the only panel reimplementing the helper inline; future
panels with inline settings get it for free.
Six widgets (clock, daytime, keyboardLayout, lockKeys, activeWindow,
media) shipped identical copies of `function setting(name, fallback)`.
Eight widgets reimplemented `readonly property bool vertical`, and
three reimplemented `readonly property int barSize`. Move all three
onto the BarWidget base so widgets read the same wiring everyone else
gets for free.
While in here, drop the dead `setting()` declaration on media.qml — it
was defined but never called.
