The bar-null-shell-null-typeof-function ternary guarded against our own
shell missing a method it always defines. bar?.shell?.firstPartyServiceFor()
handles the only real case, delayed bar injection, in one line. The
typeof checks that probe genuinely third-party plugin objects stay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Both services fire one status poll when the shell starts, but after a fresh
boot that lands before tailscaled has connected or dropboxd has finished its
respawn dance, leaving the bar icons stale for a full 30s/60s refresh
interval. Re-poll every 2s until the service shows up (or ~30s pass), then
hand off to the normal periodic refresh.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A macOS-style slider snapping to curated stops (9-20px), applied via
omarchy-display-text-size. Suppresses hover-driven focus changes while a
size change reflows the panel, so h/l on the slider can't let a shifted
row steal keyboard focus.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Each panel's hero on/off toggle (Tailscale, Dropbox Wi-Fi, Bluetooth,
network, audio mute) now has a reachable "header" cursor section, a focus
ring around the hero icon, Enter/Space activation, a letter shortcut, and
hover parity. The hero is inset by heroRingPad so the ring stays inside
the Flickable/ScrollView clip box instead of being cut off.
Bluetooth and audio get a virtual "header" section above their device
sections, so the adapter/mute can be toggled by keyboard even when no
device rows exist. Network repurposes its previously dead header section.
For the PanelHero-based panels (Tailscale, Dropbox), route panel state
through the wrapper's `header` id: inside a PanelHero iconComponent `root`
resolves to PanelHero, not the Panel, so `root.headerHasCursor` and
`root.setHeaderCursor()` silently referenced the wrong object.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The hero icon is now the optimistic on/off toggle with a tooltip,
replacing the connect block and the progress lines beneath the hero.
The disconnected cross is drawn grey rather than red, and action
errors expire after a couple of seconds instead of sticking forever.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Click the Dropbox hero icon to pause or resume the daemon (dropbox-cli
stop/start), with a tooltip on hover. When paused, both the hero and the
bar icon grey out and the phrase reads "Syncing paused". The greying is
optimistic so it reacts the instant you click, then reconciles with the
real daemon state once it settles (reverting if the command failed).
Also fix status.py's running detection, which was stuck reporting true:
this dropbox-cli inverts the `running` exit code and reports "isn't
running" (not "not running") when stopped, so the paused state never
showed. Detection now keys off the status text alone.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The pill was populated by polling omarchy-network-status (previously
every 3s, then 10s). Derive kind/signalStrength directly from the
Quickshell.Networking service instead: wired-connected → ethernet
(preferred, matching the default-route device), else a connected Wi-Fi
network → wifi with its signal, else disconnected. The service's
properties are change-notified, so the pill updates on connect/
disconnect and signal changes with no polling and no subprocess.
Removes the last periodic poll from the bar; the label/frequency pill
fields were write-only and are dropped.
Verified live: pill tracks ethernet → disconnected → ethernet in real
time as the wired device goes down and up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Each `bash -lc` starts a login shell that re-sources the profile
(mise activation, /etc/profile.d) on every invocation — ~16 forks per
call versus ~2 for `bash -c` — which taxes every menu/panel/launcher
action the shell shells out for. The session already exports PATH and
env to the shell, so omarchy commands resolve fine under `bash -c`.
Switch the internal/omarchy-owned spawns (theme+background switches,
brightness, monitor scaling, DNS, lock/fingerprint, keyboard-layout
probe, voxtype status, and the `:`/printf state-file writes) to
`bash -c`. Leave `bash -lc` on the sites that run user-configurable
commands (custom bar-widget exec, menu provider/guard scripts,
launcher scan commands, configurable idle/screensaver command), where
a user's command may rely on their login environment.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The monitor panel polled `omarchy-monitor-state` every 5s (26 forks per
call) and the network panel polled `omarchy-network-status` every 3s,
both with `running: true` rather than gating like the sibling panels.
Monitor: gate the poll on `opened` (brightness/scale are only shown in
the open panel, which already refreshes on open) and drive the bar glyph
from Quickshell.screens instead of the polled display list, so monitor
count stays correct without polling.
Network: the bar pill needs live-ish state, so keep polling but at 10s
instead of 3s. (Deriving the pill from the native Networking service
would remove the poll entirely; left as a follow-up since it needs Wi-Fi
state testing.)
Idle fork rate drops ~20/s to ~14/s.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Explicit profile selections from the power panel or menu are now saved
under an ac/battery key in ~/.local/state/omarchy/powerprofiles and
reapplied on boot and on plug/unplug. Only successful, user-made
selections are persisted, so the performance/balanced defaults still
apply when nothing has been chosen.
All entry points key off the same power signal, UPower's OnBattery:
the shell reads it natively and omarchy-powerprofiles-set autodetect
queries it via busctl. This replaces the sysfs online checks, which
disagreed with the shell on desktops without power_supply entries and
lagged behind plug events on some USB-C laptops.
Plug/unplug switching moves from the udev rule into the shell's battery
service, which already receives UPower's debounced state changes, so
the udev rule and its settle-sleep workaround are gone.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The omarchy-bar command had grown three overlapping ways to inspect the
bar (show/layout/list/options, plus selected/active/available/widgets
aliases) and mixed layout mutation in with bar-level settings. Untangle
it into two focused commands:
- omarchy-bar keeps only the bar-level settings that write shell.json:
use, reset, position, transparent, and settings. reset now delegates
to `use omarchy.bar` rather than duplicating the del(.bar.id) write.
- omarchy-bar-plugin owns all layout mutation: add, move, remove, set,
and replace, with the placement flags and jq resolve/anchor helpers.
`omarchy bar plugin ...` routes here via the dispatcher.
Drop the inspection commands entirely: the layout is visible on the bar,
the config is shell.json, and widget/option ids come from
`omarchy plugin list`. Nothing consumed the show output programmatically
except tests. This also removes omarchy-bar-position, whose jq write was
a duplicate of `omarchy bar position`.
Strip environment-invariant guards (require_command, require_omarchy_path)
that defended against jq or OMARCHY_PATH being absent — neither happens on
a real system. Keep the user-input validation (--section/--index) and the
atomic shell.json write.
Update callers (service install/remove, refresh-shell, plugin-clone,
plugin enable), keybindings, the menu, tests, and docs to the new split.
The weather widgets asked wttr.in to geolocate by IP, which lands on
whatever city the ISP registers its address block under -- Downey when
you're in Malibu. Now the location can be set explicitly:
* Click the location in the weather panel to search via open-meteo
geocoding, pick a suggestion (disambiguated by region), and it sticks.
The X next to the field returns to IP auto-detect, as does committing
an empty search.
* State lives in ~/.local/state/omarchy/settings/weather.json as
{name, latitude, longitude}, owned by the new omarchy-weather-location
command (bare call prints the current location, --set/--clear write).
The panel watches the file, so hand edits apply live.
* Stored coordinates make wttr.in and open-meteo exact. Open-meteo also
now supplies current conditions alongside the daily forecast it
already served, which fills the panel within a second of a location
change instead of waiting out wttr.in's multi-second responses; wttr
results still win once they land. Failed wttr fetches retry instead
of sitting stale until the next refresh cycle.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The `Bar` uses a `Repeater` when building out the models. This has the
effect of marshalling the configuration, and causing JSON arrays to
become sequence wrappers.
A couple of the plugins had been checking for the existence of array
values with `Array.isArray`, which fails for the sequence wrappers,
causing the values to be ignored. This breaks associated functionality
(the "hide" and "pin" actions in the systray had stopped working, as had
exit node selection in Tailscale).
Switching the guards to use `instanceof Array` works correctly for
sequence values (as well as arrays).
Weather wraps its panel in a BarWidget that only exposed togglePanel(),
so it couldn't ride the new shell-routed hotkey path and was left on the
stale-prone per-plugin target. Expose open/close/opened on the wrapper
(open maps to the panel's hotkey path so the center hover reveal stays
suppressed) and switch omarchy-notification-weather to the new syntax.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
omarchy-plugin mixed plugin lifecycle, clone/edit, and bar-layout mutation.
The bar layout was mutated by two separate engines (an embedded Python
mutate_bar here and jq in omarchy-config-shell-bar), each with its own
manifest walker.
- omarchy-plugin is now a ~220-line router; clone and edit move to
omarchy-plugin-clone and omarchy-plugin-edit, matching the existing
plugin-{source,add,update,remove,available,validate,scan} sibling pattern
- omarchy-config-shell-bar is replaced by omarchy-bar, the single bar engine
(show/layout/list/options/use/reset/add/move/remove/set/replace/position/
transparent/settings) with one jq pipeline; the Python mutate_bar and its
python3 dependency are gone
- omarchy-plugin-catalog is the shared manifest scanner used by omarchy-bar
(widget/option enumeration, add validation) and omarchy-plugin-clone
(source enumeration), replacing three find|jq re-implementations
- service install/remove and refresh-shell call omarchy-bar; docs and tests
updated to the new command surface
