Without defaultSection, both 'omarchy bar defaults' and 'omarchy plugin
add' fall back to center, so upgrades landed Tailscale next to the clock
instead of alongside the other status widgets.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Extract the speed test gauge cluster into a shared SpeedTestOverlay
The dial cluster -- scrim, ignition sweep, self-ranging dials, run-again
button -- moves from the network speed test panel into qs.Ui with the
labels, unit, title, scale stops, and layer namespace as parameters, so
other measurements can wear the same cluster. The network panel keeps
its process handling and becomes a thin dressing of the overlay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add a disk speed test and move speed tests under Trigger > Tests
omarchy-disk-speedtest streams live write and read MB/s once a second by
sampling the backing block device's kernel I/O counters while dd workers
generate the traffic, the same way the network test samples the
interface counters. The stress data is an incompressible urandom chunk
staged in RAM, written with fdatasync per pass and fadvise drop-behind:
O_DIRECT silently falls back to the page cache on btrfs, and zeros never
reach a compressed filesystem at all. Scratch files are created
exclusively per invocation and removed even when a dismissal interrupts
the run mid-phase.
The omarchy.disk-speedtest panel dresses the shared SpeedTestOverlay
with write and read dials in MB/s, titled with the hardware model of
the disk under test.
The menu grows a Trigger > Tests submenu holding the new Disk Speed
Test and the Network Speed Test, which moves there from Setup > Network.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make the disk speed test reproducible, direct, and read-first
Successive runs could swing 40% because the settled figure was just the
last one-second sample of a single buffered dd stream, taken while btrfs
copy-on-write churned the extent allocator on every rewrite pass and the
fadvise cache-eviction dance stayed advisory.
The test files are now marked NOCOW, which is what makes O_DIRECT truly
direct on btrfs -- with checksums on it silently falls back to the page
cache -- and lets every rewrite land in place. Four parallel workers per
phase give the device a queue depth it can stretch out on, and the
figure the dial settles on is the steady-state average over the whole
phase with the first warm-up second excluded, not whatever rate the
final second happened to catch. Together this tightens successive runs
from +/-40% to a few percent of each other, at the device's actual
spec throughput.
The read phase now runs first, staged against freshly written files,
with the read dial on the left. Workers also only loop while the main
script lives, so a dismissal that loses the kill race can no longer
leave an orphan hammering the disk forever, and any worker dying before
the deadline fails the run instead of passing off partial figures.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Drop the menu aliases from the speed test entries
Aliases are reserved for established alternate names users already
type, kept for compatibility -- not something new entries pick up by
default. Note that in the menu definition header and AGENTS.md so the
next entry doesn't repeat it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Group dial readouts with thousands separators
A gen5 disk reads five digits; 11,450 scans, 11450 doesn't. Uses the
locale's grouping separator.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Trim redundant overlay props and unused imports from the speed test panels
The network panel restated the overlay's default unit and scale stops,
and both panels carried imports and an omarchyPath property nothing
uses.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Publish the specific speed test error whichever handler fires last
Process exit and stderr stream-finished have no guaranteed order, so a
failure that beat the collector showed the generic message forever even
when the command emitted an actionable one; the collector now replaces
it once the text lands. Also stop clearing the error on every stdout
line: only a new run should do that, or buffered output delivered after
a failed exit erases the failure message.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Arm the disk speed test cleanup before any scratch file exists
A preflight failure -- tmpfs target, missing device statistics, not
enough free space -- exited between mktemp and the trap, leaking the
scratch files. Cleanup also now unlinks before stopping the workers and
sweeps once more after, so even a cleanup cut short by an impatient
SIGKILL leaves no names behind and a final worker pass cannot recreate
one.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix(network): drop the redundant rescan on the bar click
Opening from the bar ran open() and then a bare refresh(). open() already
triggers onOpenedChanged -> refresh(true), which defers the PHY scan by
disabling the scanner and re-enabling it from scanRestart. The bare
refresh() that followed defaults scanWifi to false, so it took the other
branch and set wifiDevice.scannerEnabled synchronously on the click frame,
undoing the deferral and stalling the open on NetworkManager's access-point
flood. It also double-started the DNS and band probes.
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(network): keep wifi rows QObject-free to prevent a delegate crash
wifiRow() embedded the WifiNetwork QObject in the row it returns, and those
rows are list-model data, so every delegate held a live QObject wrapper in a
var property. When NetworkManager churns the list -- a scan's access-point
flood, an AP disappearing -- the object can be destroyed while a delegate is
still incubating, and quickshell segfaults in QObjectWrapper::wrap_slowPath
on the dangling wrapper.
Project primitives only and resolve the backend object at action time via
the existing networkForSsid(). Both failNetworkAction() and
checkActionCompletion() already no-op on a null network, so a row whose
network has since vanished is handled the same way it was before.
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(bluetooth): keep device rows QObject-free to prevent a delegate crash
Same crash class as the wifi rows: scrollRows embedded the BlueZ Device
QObject in list-model data, so every delegate held a live wrapper in a var
property. Discovery churn -- a scan timeout dropping a device, an unpair --
can destroy the object while a delegate is still incubating, and quickshell
segfaults on the dangling wrapper.
Project primitives for both the scroll rows and the connected rows, and
resolve the backend object by address in deviceFor() for the click actions.
The keyboard flow already went through deviceAt(), which reads the live
device arrays directly rather than model data, so it is untouched.
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix(network): guard row disconnects against a vanished network
Row activation resolved the WifiNetwork with networkForSsid() and passed the
result straight to disconnect(), which falls back to connectedWifiNetwork
when handed null. A row is a primitive snapshot, so scan churn can remove its
backing object while the row is still on screen -- activating it then tore
down whatever happened to be connected at that moment rather than doing
nothing.
Route both row paths through disconnectRow(), which resolves first and only
acts when the row still maps to a live network. disconnect() keeps its
fallback for callers that mean "drop the current connection".
Also covers the bar-click open path, which had no regression: the suite
already asserts against Panel.qml source, so assert the closed branch calls
open() alone and never a second refresh().
Co-Authored-By: shrijit <shrijitsrivastav@gmail.com>
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: shrijit <shrijitsrivastav@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* fix: reopen wifi passphrase prompt after a wrong saved password
A failed first connection attempt leaves the network profile saved, so the
network shows up as known. Clicking it again reconnects with the stored
wrong PSK and fails with WifiAuthTimeout, but the inline passphrase prompt
only reopened on NoSecrets, leaving no way to re-enter the password short
of forgetting the network.
Treat an auth timeout on a protected network as a wrong saved passphrase
and reopen the prompt; connectWithPsk overwrites the stored PSK on submit.
Fixes#6582
* Scope the wifi passphrase reprompt to panel-initiated connects
Background auto-connect retries also fire connectionFailed; without a
gate they would pop the passphrase prompt open unbidden, stealing focus
and wiping a passphrase mid-entry when another network fails.
For the gate to see the failure, the action safety-net timer must
outlast NetworkManager's 25s supplicant timeout -- at 15s it cleared the
action state before WifiAuthTimeout arrived, so a wrong saved password
showed "Timed out connecting" instead of "Wrong password". Bump it to
30s.
Also share the one ConnectionFailReason map between the Model.js
helpers instead of building a second partial copy inline.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* Extract the Wi-Fi QR share card into its own omarchy.wifiqr panel plugin
omarchy-network-qr now leads with an iface/security/ssid meta line, so a
bare summon self-detects the connection and the plugin owns the whole
share flow. The network panel loses its overlay lifecycle: with no
centered card left inside it, the shadowed open/close collapses back to
the stock panel behavior, and the QR button just summons the plugin --
which a clone or third-party plugin can replace, like the speed test.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep canceled QR and password runs from leaking into their replacements
Copilot review: the cancellation guards dropped in onExited while the
canceled run's collectors were still allowed to fire, so a stale stderr
could shadow a successful regeneration and a stale password could be
revealed under a new network's card. The guards now stay up until the
next run launches, good output settles any earlier error, and a bare
re-summon no longer inherits the previous card's SSID.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
The network panel now summons it, so a clone or a third-party plugin
declaring clonedFrom: omarchy.speedtest can replace the whole speed
test -- dials and run orchestration alike -- for every caller.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* fix(network): pin overlay text to a fixed on-scrim palette
SpeedTestPanel and WifiQrPanel both draw over a hardcoded near-black
scrim, but their text/tick colors came from bar.foreground -- a color
themed to contrast with the *bar's* own background, which flips
dark/light per theme. On themes with a dark bar.foreground, digits
and labels went invisible against the black scrim, leaving only the
accent-colored arc/needle (Color.accent) visible.
Add a fixed white-based on-scrim palette (onScrim/onScrimDim) to both
overlays and route all text/tick colors through it, independent of
theme. bar.urgent stays theme-driven since it's a semantic color
already legible on near-black.
* Trim the on-scrim palette comments to the constraint
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pin overlay error text to a fixed on-scrim urgent color
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Every preset in the right-click ring was 24-hour, so a 12-hour label was
something you had to hand-write into shell.json. Pair each locale-shaped
time preset with its AM/PM twin, and give vertical bars one stacked
variant. The ISO preset keeps its 24-hour clock, since ISO 8601 writes
time that way.
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Open-Meteo fetch is the only thing that updates the bar icon when a
location is configured, but a failed response was dropped silently with
no retry, leaving a stale icon until the next refresh tick. Give it the
same short retry loop the wttr fetch already has, and reset both retry
budgets on each full refresh cycle so an exhausted round (e.g. waking
before the network is back) doesn't starve retries for the session.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make omarchy-network-qr detect the connected Wi-Fi interface
The interface argument is now optional so IPC and menu callers can
summon the QR card without knowing the device name.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test into a modal card with cluster dials
The network panel's Run button and the new omarchy.network speedTest
IPC route open a centered card where download and upload dials sweep
on open and track the live readings, Tucson style. Dismissing the card
stops the traffic workers. The QR card gains a showQr IPC route.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Add Setup > Network menu with DNS, QR Code, and Speed Test
DNS switches providers through omarchy-dns with the current choice
checked. QR Code only shows while connected over Wi-Fi.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Hold the speed test card steady and add a corner dismiss
The Run Again button now fades instead of unmounting so the card keeps
its size across runs, and a small X in the corner closes the card
alongside Esc and the scrim.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Move the speed test action into the network panel hero
A speedometer icon beside the QR share replaces the dedicated inline
section, and the keyboard chain loses its speed stop accordingly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the speed test cluster on the scrim
Drop the bordered card and the pulsing halo: like the Tucson's floating
cluster, the dials now sit directly on a near-black scrim with a soft
under-glow along the value arc, fainter ticks, and hubless needles that
fade toward the pivot.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Center the retry button between the dials
The measuring status lines and the corner dismiss go away; the retry
button moves into the gap between the two dials like a cluster's center
display, anchored out of the column flow so nothing ever shifts. The
fast.com attribution lives on as its tooltip, and only errors still
print below the cluster.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Put the retry button back beneath the dial pair
The dials close ranks again and the retry button returns below them,
centered on the pair and still fading in place so nothing shifts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Harden the network IPC routes against stale panel state
The QR menu route forces interface self-detection instead of trusting
details that stop refreshing while the panel is closed, and the
widget's canonical close now tears down the centered cards and their
traffic instead of only hiding the compact panel.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Re-range the speed dials for every run
The scale latched upward forever, so one unusually fast run would
compress every later one for the lifetime of the shell process. Each
dial now returns to the base scale when its measurement starts.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Float the Wi-Fi QR share like the speed test
Same presentation as the dials: no bordered card, just the code on a
heavy scrim. Only the dark modules paint now, so the white canvas can
round its corners while the spec quiet zone keeps the code clear.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Pick the default-route device and pin the locale in QR detection
nmcli localizes state names, so the detection fallback pins LC_ALL=C
and accepts states like "connected (externally)". Detection now prefers
the default-route device, matching the connection the panel and the
menu's visibility gate describe when several Wi-Fi adapters are up.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Make every network summon path overlay-aware
Opening the widget while a centered card is up now dismisses the card
instead of raising the compact panel behind an exclusive overlay --
the shadowed open() covers the keybind toggle, the bar icon, and IPC.
Re-summoning a card while its process is still tearing down queues the
fresh request for onExited instead of dropping it, and the speed test
route refreshes connection details like the QR route does.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Shrink the overlays to fit narrow outputs
The dial cluster and the QR card scale down instead of clipping when a
portrait or heavily scaled display is narrower than their natural size.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Every toggle you could only reach by mouse or panel hotkey is now
scriptable through omarchy-shell:
- omarchy.bluetooth toggleBluetooth — the radio (was right-click / B)
- omarchy.network toggleNetwork — Wi-Fi on/off (was W in the panel)
- omarchy.tailscale toggleTailscale — the connection as one call,
matching the widget's right-click, instead of separate up/down
- omarchy.clock toggleWeekStart — calendar week start (was W)
- shell toggleBarTransparency — the bar background (was manage UI only)
Bluetooth and network follow the power/monitor pattern: manageIpc: false
so the panel owns the target's single IpcHandler and can extend it past
the inherited lifecycle methods.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
omarchy-shell omarchy.power togglePercentage now flips the same setting
the widget's right-click does. Follows the monitor/tailscale pattern:
manageIpc: false so the panel owns the target's single IpcHandler and
can extend it past the inherited lifecycle methods.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The widget declared no indicator hint, so the mark fell back to 55% of
the slot — sized for a lone icon, too short once the percentage doubles
the block. Hint the glyph's painted width, the way the clock hints its
label width.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Support external monitor brightness
Route brightness through the focused Hyprland monitor so internal panels keep using the kernel backlight while compatible external displays use DDC/CI. Preserve the Apple Display backend and leave brightness unavailable when the focused display cannot be controlled.
Add cached DDC bus and VCP range handling, install ddcutil for new and existing systems, and cover backend selection and brightness conversion with shell tests.
* Harden external brightness caching
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Dismiss bar panels when clicking on another monitor
* Preserve keyboard focus for reopened panels
* Harden cross-monitor panel dismissal
* Wait for panel mapping before releasing focus
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Add Wi-Fi QR sharing to network panel
* Refine Wi-Fi QR sharing
* Use QR glyph for Wi-Fi sharing
* Add click-to-reveal password to the Wi-Fi share card
Scanning the QR is the fast path, but the person typing on a laptop needs
the actual password. A dimmed "Show password" hint under the QR toggles
the secret in place.
The password stays out of the shell until asked for: a click runs the new
omarchy-network-password helper (a private pipe, never an argument), and
closing the card drops it again. Open and enterprise networks never show
the control.
The card loses its Close button -- Escape and clicking outside already
cover it -- and now sizes itself to its content.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep a dismissed Wi-Fi share card closed and make Escape reliable
Closing the card mid-generation killed the helper, but its buffered
stdout still arrived and repopulated the matrix, reopening the card the
user just closed. Both collectors now honor qrExpectedStop, and the flag
survives onExited because exit and stream-finished have no guaranteed
order. The password fetch gets the same treatment so a reveal in flight
during dismissal can't stash the secret into a closed card's state.
The content's focus was claimed while the window was still unmapped, so
Escape could land nowhere. Re-acquire it after mapping, the way
KeyboardPanel does.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Share WEP networks correctly and restore the QR quiet zone
NetworkManager models WEP as key-mgmt "none" plus a wep-key, so the QR
helper encoded WEP networks as open -- a QR that scans fine and then
silently fails to join. Encode them as T:WEP and let the password helper
print the key.
Also widen qrencode's margin from 2 to the spec's 4-module quiet zone;
the card surround is dark, so that white border is all a scanner gets.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Pins the active connection to 2.4/5/6GHz, or leaves the choice automatic.
The section only appears on Wi-Fi when the network answers on more than one
band, or while a pin is in force so it stays clearable.
bin/omarchy-network-band reports and sets the band. It sets NetworkManager's
802-11-wireless.band rather than pinning a BSSID: NM 1.44+ accepts a third
band value so 5 and 6GHz can be pinned apart, and a band survives an AP
rotating its BSSIDs while leaving roaming between APs intact. It refuses a
band the network does not answer on, and restores the previous setting if
reassociation fails rather than leaving the machine offline.
Under Automatic the pills collapse and the header reads the live band
("WI-FI BAND: 2.4GHZ"); pinning reveals them and the header goes plain. The
height is animated, and the section stays mounted through the reconnect a
band change causes -- otherwise `kind` briefly stops being "wifi" and the
whole segment would tear down and rebuild.
Two fixes to the same panel fall out of this:
- Every stat row stays mounted and reads "--" until it has data, instead of
appearing a beat after the panel opens and shoving the rows below down.
- The speed test's Run button is scaled to match the band header's controls
and joins the keyboard cursor chain.
ToggleSwitch gains a settable trackHeight so a compact placement can render a
genuinely small switch instead of scaling one down onto fractional pixels.
Defaults are unchanged.
Claude-Session: https://claude.ai/code/session_01XcKqYe1n5bnRBuAZwikwsr
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Show OSD and sync touchpad steps when scrolling bar widgets
Scrolling the volume or brightness icon in the bar changed the value
directly without ever calling omarchy-osd, so only the keyboard media
keys showed the popup. On top of that, a touchpad's stream of many
small wheel events per finger-drag wasn't matched to a mouse's single
±120 notch per click, so touchpad scrolling felt uncoordinated and
uneven next to the keyboard/mouse behavior.
- shell/plugins/panels/audio/Panel.qml: accumulate raw wheel delta and
only apply a step once it crosses a full mouse-notch's worth, so
touchpad and mouse move the volume in identical 5% increments, and
ping the OSD each time a step actually lands.
- shell/plugins/panels/monitor/Panel.qml: same accumulator for
brightness, with a 5% floor so scrolling down can never blank the
screen.
- shell/plugins/osd/Osd.qml: animate the progress bar's width instead
of snapping, so successive steps glide smoothly.
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Fix bar wheel OSD behavior
* Normalize scaled wheel events
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: David Heinemeier Hansson <david@hey.com>
* Give built-in plugins an honest on/off state
Every built-in reported itself enabled no matter what. A bar widget said
"enabled" while sitting nowhere near the bar, and disabling a built-in service
silently did nothing, because enabled meant "listed in plugins[]" and a
built-in never is. Nothing surfaced that, since the only caller listing plugins
was the CLI.
For a widget, on and off is its place in the bar, so listPlugins reports layout
membership -- what enable/disable actually toggles. For everything else built
in, loading by default is the right behaviour to keep, so switching one off is
recorded the other way round, in disabledPlugins[]. shell.json still carries
only the deviation from the defaults: the key is dropped the moment nothing is
switched off, leaving a config that never disabled anything byte-identical.
isEnabled still answers a separate question -- whether the component loads at
all -- and deliberately does not follow a widget out of the bar. omarchy.menu
is both a widget and the menu itself, so tying the two together would let
taking its button off the bar lock the menu out of the shell, with no way back
that isn't the CLI.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Manage plugins from Setup > Plugins
Plugins were CLI-only. Setup > Plugins now offers Enable, Disable, Add, and
Remove, each list living in the menu itself so picking a row acts on it.
Enable and Disable cover the built-ins as well as anything installed -- the bar
widgets you can put in the bar, the services and overlays you can switch off.
Remove is limited to plugins the user installed, since a built-in has no
checkout to delete, and stays hidden until there is one. Whole-bar
replacements are left out; those are chosen under Style.
Enabling a bar widget asks for a section first, because enabling alone drops it
on the right and the only way to move it was a follow-up bar plugin move. The
CLI asks the same question after its own add, so both paths place a widget the
same way. Add and Remove run in a terminal: one needs a git URL and shows the
trust warning before cloning, the other deletes a checkout and prints where it
backed it up.
Providers grew two hooks for this. placementFor turns a row into a submenu
instead of an action, and volatile re-runs the enumeration when its submenu is
entered -- picking from these lists is what changes them, and rows a provider
no longer returns now drop out instead of lingering forever.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Trim the plugin menu after review
Menu.qml carried its own shellQuote while already importing Util and calling
Util.shellQuote a few lines up; two copies of the same escaping is one place
for a future fix to miss. isDisabled walked the array by hand to compare values
it writes itself, and dropDisabled was an eight-line helper with one caller.
Two bugs came out of the same pass. A whole-bar replacement belongs under Style
rather than these lists, but the exclusion sat in the shared row builder, so a
third-party bar could be installed and never removed -- Remove would show an
empty list under a guard that said something was there. The exclusion now sits
on the two lists that mean it.
Rows are keyed by id, and distinct plugin ids can slugify alike: acme.foo,
acme_foo and acme-foo all give acme-foo. The merge keeps the first row per id,
so the rest simply vanished from the list with nothing to say why. Row ids are
now made distinct before merging.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Pick a plugin the way we pick a theme
Setup > Plugins listed plugins as menu rows, which needed three providers, a
placement submenu, a volatile-refresh hook and a row-swap in the merge. Only
Font and Apps are built that way. Theme, Background, Unlock, Timezone and
Keybindings all pipe a list into omarchy-menu-select instead, which is one
action string and a small script -- so that is what these use now.
The trade is search: a plugin name is no longer findable from the root prompt.
Neither is a theme name or a timezone, and Enable Plugin still is, so the loss
sits where the rest of the menu already puts it.
Two pieces of the row machinery stay, because they are worth having for the
lists that remain. A volatile provider re-runs when its submenu is entered, so
a font installed since the shell started now shows up without restarting it,
and rows a provider stops returning drop out. Row ids are still made distinct
before merging: Fira Code and Fira-Code both slug to fira-code, and a repeated
id was silently dropped.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Let a picked option carry an icon
Moving the plugin lists onto omarchy-menu-select cost them their glyphs: the
select mode has always hardcoded an empty icon, which is why Timezone and
Keybindings have none either. An option may now lead with one, as
"<glyph><TAB><label>". The menu shows the glyph, filters on the label, and
hands the label back, so a caller never strips a glyph off its own selection
and a list of plain strings behaves exactly as before.
The plugin picker uses it for the puzzle glyph on each plugin and the align
glyphs on the sections, which also regain the capitals they lost when the
section names were passed through raw.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Switch bars by enabling one
A bar option was kept out of Enable and Disable on the grounds that picking
which bar to run belongs under Style -- but nothing under Style ever offered
it, so an installed bar could be added and removed and never actually put to
use. The menu was guarding a door to a room that was never built.
Enabling one is the switch. setEnabled already assigns bar.id for a bar
option, so a bar has always replaced the one before it; only the picker's
filter stood in the way. Dropping it costs nothing else, because enabled for a
bar option means active: the bar in use is the one row absent from Enable,
every other installed bar is one pick away, and the built-in is just another
entry, so going back to it is enabling Bar.
Disable keeps the exclusion. That is the one verb a bar cannot answer -- there
is no off, only a successor -- and offering it would have listed the built-in
bar on a stock system, where turning it off deletes a bar.id that was never
set and nothing happens.
A bar carries the bar glyph rather than the puzzle one, so a row that replaces
the whole bar does not read like one more widget to switch on, and enable now
says "Now using X as the bar" instead of "Enabled X", which understated a
whole-bar swap in both the enable and the freshly-added path.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Refuse a plugin that declares a kind it cannot load
A kind is a promise to supply something to load, and the shell reads that
something from a fixed key: entryPoints.bar to draw a bar, entryPoints.menu to
open a menu. Nothing checked the promise. A manifest could claim kinds ["bar"]
with no bar entry point, pass validation, install, and enable -- and then the
bar would fall back to the built-in and the widget would be skipped, leaving a
plugin that does nothing, explained only by a console.warn nobody reads.
Our own plugins have been held to this table by plugins-test.sh all along.
This holds third-party ones to the same table, at add and update time, where
there is still someone to tell.
A kind outside the table is left alone rather than guessed at, so a shell that
learns a new kind does not need this list updated first. The cost is that a
misspelled kind still installs quietly.
omarchy-plugin-validate had no tests; it has some now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Act on the plugin whose row was picked
The picker showed a name and then looked that name up again across every
plugin, filtered set or not, taking the first match. Two plugins can share a
name: cloning one keeps the name it was cloned from, so the documented
`omarchy plugin clone omarchy.clock local.clock` leaves two plugins called
Clock. Enable listed the clone -- the built-in was already enabled, so only the
clone was eligible -- and then enabled omarchy.clock, moving the built-in
widget instead. Remove listed the clone and tried to delete a built-in that has
no checkout to delete.
A row now carries its id alongside its label, and the id is read back off the
row that was picked instead of being derived from the name a second time. Where
a name is not unique among the rows on offer, the label carries the id too, so
two rows that would both say Clock can be told apart at all -- which they could
not before, whichever one the pick resolved to.
The verb prompt only ever sees the first two fields, so the menu shows what it
always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Never ask a bar where to sit in the bar
A manifest may declare both bar and bar-widget, and validation accepts it. The
picker saw bar-widget, asked for a section, and passed it to enable. setEnabled
takes bar as the dominant kind: it writes bar.id and returns, adding nothing to
any layout, so the move that followed had no widget to find and failed -- after
the bar had already been switched. A partial success with an error on the way
out.
Bar wins ahead of bar-widget now, in the picker and in the placement prompt
`plugin add --enable` asks, so a bar is enabled without a placement it cannot
use. The CLI refuses a placement on a bar outright, before the bar is switched
rather than after, since `omarchy plugin enable <bar> --section left` could
reach the same half-applied state without going through either.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Only replacement, no off
* Add default placement for bar widgets
* Simplify plugin menu actions
* Document plugin placement behavior
* Allow dropping widgets in empty bar space
* Treat plugin dependencies as runtime invariants
* Reject duplicate plugin ids on add
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
The panel drove a Flickable by hand: two Repeaters in a Column, plus an
ensureCursorVisible() that mapped each row into content coordinates and
moved contentY itself. That is the machinery a ListView already has, and
the hand-rolled version came with a 6px margin that scrolled the list
whenever the mouse merely rested near the viewport edge.
Flatten the remembered and discovered groups into one model whose entries
carry the section they came from, and let the view keep the current row
visible. Section headers are computed per index the way the network panel
does it. The cursor keeps working in section-relative terms, so
activation, forget, hover, and the hero toggle are untouched.
Positioning has to be deferred a turn: called straight out of
onCurrentIndexChanged it silently does nothing, because the model is
rebuilt every time discovery reports and the swap resets the view out
from under the call.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The hero switch is the panel's on/off, so it now carries output and input
together rather than output alone. It reads as on while anything is still
audible, which keeps muting a single channel from flipping the master switch.
Right-clicking a volume bar mutes just that channel -- output, input, or one
app's stream -- matching what the `m` key already does for the focused row.
Only channels that exist get a vote: a machine with no default source would
otherwise report its input unmuted forever, leaving the switch able to mute but
never to unmute.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add Tailscale header on/off toggle
* Address Tailscale toggle review feedback
* Hide Tailscale tooltip while busy
* Keep Tailscale labels clear of header toggle
* Extract the switch from Toggle into a reusable ToggleSwitch
Toggle rendered its own track and knob inline, so anything else wanting a
switch had to copy the geometry. Pull it into Ui/ToggleSwitch.qml and let
Toggle compose it, and give PanelHero a trailingControl slot so a hero can
pin a control to its trailing edge without the caller doing the layout.
The switch draws its cursor as a ring outside the track: themes give normal
chrome a stronger border than hover-cursor, which is right for controls that
are borderless at rest but would make a bordered track go fainter under the
cursor.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the panel cursor on the virtual header section
clampCursor resets focusSection whenever it is not in visibleSections, but
"header" is virtual and never appears there. Any refresh of the underlying
model therefore threw the cursor off the hero toggle: muting republishes the
PipeWire snapshot, and toggling the Bluetooth adapter empties and refills the
device lists. moveCursor already special-cases "header"; clampCursor now does
too.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toggle panel heroes with a switch instead of the status icon
The hero icon doubled as the on/off control, which was invisible as an
affordance and made the icon carry two jobs at once. Give Tailscale, Dropbox,
Bluetooth, Audio, and Network a ToggleSwitch on the trailing edge of the hero
and leave the icon to report status. The switch is the header's only cursor
target, so the keyboard reaches it the same way the mouse does.
Dropping the icon's focus ring also drops heroRingPad, which lets each hero
line up with the rows beneath it. Network's link detail moves inline after the
name -- "Ethernet (2.5gbit)" -- since the pill crowded the switch.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the network hero switch honestly a Wi-Fi switch
The switch reads and writes Networking.wifiEnabled, but its tooltip claimed to
turn "network" on and off whenever Ethernet was the active connection. A click
asserted nothing; a switch asserts state, so on a wired machine with the radio
off it sat there reading "off" beside a perfectly live Ethernet connection.
Say Wi-Fi, and only offer the switch when there is a radio to switch.
headerActionCount follows the same condition so the keyboard cannot reach a
control that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop the header cursor claiming an absent switch
The switch hides when the thing it toggles is unavailable -- no Tailscale CLI,
no Dropbox CLI, no Wi-Fi radio -- but "header" stayed reachable, so the cursor
could sit on a target that never rendered. The old clickable icon was always on
screen, so there was always something to highlight.
"header" stays navigable and Enter still no-ops safely; the cursor just stops
claiming a spot that is not there.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wrap the gallery's switch caption
The caption sat unbounded inside the switch row. The gallery has a 560px
minimum width, horizontal scrolling off, and clipping on, so at that size the
end of the line was simply unreachable. Move it below the row and wrap it, the
way every other description in the gallery already does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: David Heinemeier Hansson <david@hey.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both sides tightened the same center-layout assertion. Taking quattro's:
it asserts the weather/update adjacency the test name is about instead of
pinning the whole row, which is what kept breaking it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Double-tapping the year bar asks for a birth year and a life expectancy,
and a second bar appears below measuring one against the other. Tab moves
between the two, Enter commits the pair, Escape drops them. Hovering the
bar names the thing, and double-tapping it puts it away again.
A birth year rather than an age, so the bar keeps counting on its own
instead of going stale the moment it is entered. Expectancy defaults to
ninety and falls back to it when what is entered makes no sense, so the
bar always has something to measure against; a birth year that makes no
sense leaves the bar hidden instead, which is also where it starts.
Putting the bar away keeps the expectancy, so setting a birth year again
brings your own number back rather than the default.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claiming the shared suppression flag before showing meant the outgoing
panel's close cleared it again, leaving the incoming panel open with the
indicators still revealed. Guarding the clear instead only moved the
problem: handing off to a panel that does not manage the flag left it
stuck on, and the center indicators stopped revealing on hover for good.
Claim it after the handoff instead. The panel taking over always wins,
and a handoff to a panel that knows nothing about the flag still leaves
it cleared.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Clicking the clock reveals a month grid with ISO week numbers, a year
progress meter, and month stepping. Right click walks the common label
formats and writes the chosen one back to shell.json, so the bar shows
what the config stores. The week start toggles from the grid's "W"
heading and persists as weekStartDay, defaulting to the locale's own
first day.
Rich popup widgets live in their own plugin directories, so the clock
moves out of bar/widgets/ into panels/clock/. The id is unchanged, so
existing layouts and centerAnchor keep working.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The bar identifies a panel by the widget mounted in its slot, but the
nested panel handed the popout coordinator itself. The open-panel mark
never lit under the weather pill, and Tab could not leave the panel.
Closing for a popout switch also cleared the shared hover-reveal flag the
incoming panel had just set.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Send files to a tailnet machine with Taildrop
The panel gets a send button next to the copy one on every machine that
Tailscale grades as a Taildrop target, and `s` does the same from the
keyboard. Picking runs through the XDG portal chooser, so it looks like
the file dialog every other app opens.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Save incoming Taildrop files and say so
Linux keeps Taildrop files in the daemon's inbox until someone asks for
them, so nothing arrived until you ran `tailscale file get` by hand. A
user service now stages each delivery next to the downloads directory,
hands it over under a free name, and announces it — with a preview when
it's an image, and a click to open it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Float every portal dialog, not just the titled ones
The portal only ever shows dialogs, and the title regex missed any
chooser an app names something else — ours included.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TJQJfHXXApUk6En8EZisHg
* Re-run the Taildrop enable now that the unit ships
The unit was never installed to /usr/lib/systemd/user/, so the enable had
nothing to act on and machines that already ran the migration carry a marker
for a no-op. Rename it so they get a working pass, and report what systemctl
says instead of a bare failure line.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Wait for the file chooser on the connection that asked for it
The portal answers a request with a Response signal directed at the connection
that made it, and dbus-daemon delivers directed signals only to that
connection. gdbus monitor registers with AddMatch rather than BecomeMonitor, so
it never saw the reply: every pick left omarchy-file-select blocked on a read
that could not arrive, taking omarchy-tailscale-send down with it before it
reached either its notification or the transfer.
Make the call and wait for the signal on one connection, and give up after ten
minutes so an unanswered dialog cannot strand the caller.
Drop the "Sending to" notification while here, so a send reports once.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Mark Taildrop notifications with the panel's send glyph
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Stop a hung tailscale poll from freezing the panel
Each poll is skipped while its own process is still running, so one that never
exits leaves the panel showing whatever it last read, for good: the peer list
keeps a woken machine missing, and opening the panel cannot help because open
runs the same refresh that hits the same guard.
Reap anything still running fifteen seconds after a refresh, well inside the
thirty second interval, so the next tick starts clean.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Place a moved widget where an added one lands
'move omarchy.media left' named a section, not a slot, but the section went
through as an explicit target, which resolves a missing index by appending. The
widget landed on the far end of the row instead of after the section anchor
where 'add' puts it.
Its test has never run: the assertion covering this went in four hours after an
unrelated layout change had already stopped the file, and the runner stops the
whole suite at the first failure.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Keep the config test from failing on things it is not about
The center layout assertion pinned the whole row, so parking the indicators
left of the clock broke a test named for update sitting next to weather. Assert
that adjacency instead.
The package-defaults check reads PKGBUILDs from the omarchy-pkgs repo and blew
up with a traceback wherever that is not a sibling checkout. Skip it when the
checkout is absent, honour OMARCHY_PKGS_ROOT when it is somewhere else, and
keep failing when it is present and wrong.
Between them these stopped the suite eighty files early.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Make the file chooser a Python command rather than a bash host for one
The portal work was a heredoc wedged inside a bash script that existed only to
parse two flags. Drop the host: argparse covers the flags, and the file says at
the top why it is the one command here not written in bash.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Tell a chooser that never opened apart from one that was dismissed
Three fixes from review:
The poll watchdog rearmed on every refresh, so a refresh interval shorter than
its timeout — the setting goes down to five seconds — pushed the deadline ahead
of a hung process forever. Arm it on the launch that needs watching and leave
it alone.
omarchy-file-select exited 1 both for nothing picked and for a chooser that
could not run, and omarchy-tailscale-send read it through a process
substitution, which drops the status anyway. A session bus that was not there
looked exactly like someone changing their mind. Separate the two exits and
read them with a command substitution.
Delivery picked a free name and then renamed, which overwrites anything that
takes the name in between. Link to the name instead: link(2) refuses one that
is taken, so the check and the claim are the same step.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
Laptop speakers ship voiced by the vendor's Windows DSP layer, which Linux does
not get. A tuning restores that as a PipeWire filter-chain in front of the
internal speaker sink, matched to the machine by DMI string and expected sink.
Adding a laptop is a directory under default/audio/tunings with two files and no
new code: matching is data. The XPS 14 DA14260 tuning included here was derived by
measuring the xps-audio-linux EasyEffects profile (MIT) and fitting a biquad chain
to it, so no impulse response or other upstream asset is redistributed. It measures
1.24 dB RMS against that reference, and matches its dynamic range within 0.1 LU --
the reference's multiband compressor turned out to contribute nothing, so a linear
chain replaces it. Bass Q is capped deliberately: a closer magnitude fit swung
group delay 31 ms across 63-80 Hz, which smears bass transients.
The graph runs as its own PipeWire client under its own config name rather than
loading into the audio daemon. The daemon only reads its config at startup, so a
daemon-loaded tuning could only be switched by restarting PipeWire -- which drops
every PulseAudio client's connection, and applications that do not reconnect
(Spotify) then have to be restarted by hand. Hosting it separately also contains
failure, since a malformed tuning breaks only that service.
Three things about the surrounding audio graph needed fixing for this to behave:
- Volume must live downstream of the tuning. omarchy-audio-output-sink is now the
single definition of which sink an output's volume really uses, shared by the
volume keys, the output switcher's OSD and the audio panel, so they cannot
disagree. It resolves the current default output, which keeps it correct when
headphones are selected while a tuning exists.
- The tuning's own output is a movable sink input, so rerouting "all streams" to a
newly selected output would drag the processing onto headphones, or into the
tuning's own sink, which is a cycle. It is pinned, and stream moves are limited
to streams carrying an application.name.
- The physical sink a tuning fronts is not independently selectable, since picking
it would only bypass the tuning, so it is kept out of the output list.
Applying happens at first-run, not finalize-user, because finalize-user also runs
in the ISO chroot where there is no audio server and nothing would retry.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
argv is world-readable in /proc for every local process while the
connection attempt runs. Create the profile without the secret, then
set it through nmcli's scriptable connection editor, which reads from
stdin.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
SCALE only applies to the focused monitor, which is easy to lose track
of with several displays. Show the focused monitor's name on the right
of the SCALE header (matching the BRIGHTNESS/TEXT SIZE value
convention), hidden when only one display is enabled.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The bar-null-shell-null-typeof-function ternary guarded against our own
shell missing a method it always defines. bar?.shell?.firstPartyServiceFor()
handles the only real case, delayed bar injection, in one line. The
typeof checks that probe genuinely third-party plugin objects stay.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Both services fire one status poll when the shell starts, but after a fresh
boot that lands before tailscaled has connected or dropboxd has finished its
respawn dance, leaving the bar icons stale for a full 30s/60s refresh
interval. Re-poll every 2s until the service shows up (or ~30s pass), then
hand off to the normal periodic refresh.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
