Files
omarchycn/shell/shell.qml
T
e1d0c4e0a8 Ship the keyboard layout widget on the bar and make clicking it work (#6659)
* Hide the keyboard layout widget on a single-layout install

There is nothing to read or switch when only one layout is configured, so the
label is noise on the bar most people have. Hide it until the keyboard reports
more than one, and keep showing it on a Hyprland that doesn't report the list
at all rather than hiding the widget everywhere.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Put the keyboard layout widget on the bar by default

The widget hides itself unless the active keyboard has more than one layout,
so shipping it costs a single-layout machine nothing and saves everyone else
from finding it in the plugin list. Sit it just right of the clock, and add it
to existing bars the way the agents widget was added, leaving a curated bar
and a disabled widget alone.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Cycle the layout with the hyprctl command that exists

switchxkblayout is a hyprctl command, not a dispatcher, so sending it over the
dispatch socket only produced a Lua syntax error and clicking the widget did
nothing. Run it instead, against the keyboard the label was read from.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Add an idempotent bar add command

Nothing put a widget on the bar without going through the running shell:
plugin enable and bar move both forward to it over IPC, which a migration
cannot rely on. Add writes the config file the way position and transparent
already do, and leaves a widget that is already on the bar where the user put
it, so callers can ask for it repeatedly.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Put the keyboard layout widget on bars through the bar CLI

The hand-written jq was a normalizer, a presence check and a splice for what
is now one command that carries all three.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Keep bar add from writing a bar the shell was not reading

The shell takes a user shell.json only when it parses, says version 1, and
carries a bar layout, and does not deep-merge; anything else leaves the
shipped defaults on screen. Reading and writing the user file regardless
turned a config holding nothing but an idle timeout into a bar holding
nothing but the new widget, and made an unparsable one abort the migration
chain on every update. Work against whichever layout is actually in effect,
seeding the defaults before placing a widget they do not already carry.

A malformed hand-installed manifest fails the whole plugin catalog, which was
enough to refuse a first-party widget, so treat an unreadable catalog as no
answer rather than a no. Leave a widget listed in disabledPlugins off the bar
instead of writing a layout entry the registry refuses to load, and re-check
presence inside the mutation so two adds cannot both miss it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Read a widget's default bar section in one place

cmd_defaults spelled out the same "defaultSection, or center when it is
missing or not a section" rule that the add path already asks for by name.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Rename bar add to bar put

'omarchy plugin add' installs a plugin and 'omarchy bar add' placed one that
was already installed, which is too much meaning for one verb.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Place a newly added bar widget with bar put

plugin add reached the bar through plugin enable, which forwards to the
running shell, so it first had to poll until the shell noticed the clone and
then failed outright when no shell was there to ask. Putting a widget on the
bar is a config edit, so do that directly and leave plugin enable to the
plugins that need registering rather than placing.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

* Put bar widgets through the shell instead of the config file

Placing a widget existed twice: once in PluginRegistry, which the shell uses
and owns the config it holds in memory, and once as jq against shell.json.
The second was there so migrations could run without a shell, which they do
not need to: the Quattro upgrade hands over the shipped shell.json before it
runs any, and every other path runs inside a session with a shell up. Ask the
shell, and say so and carry on when there is none to ask.

putBarWidget enables only what is not already on the bar, which is what a
caller that cannot know whether it ran before needs, and is the one thing the
existing enable path would not do.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-09 19:38:46 +02:00

1015 lines
37 KiB
QML

import QtQuick
import QtQml.Models
import Quickshell
import Quickshell.Io
import qs.Commons
import "plugins/bar"
import "services"
ShellRoot {
id: shell
// Shared service instances. Plugins receive these via property injection
// rather than re-importing them as singletons — relative-path imports do
// not share singleton state, which silently leaves consumers with their
// own empty copies.
property PluginRegistry pluginRegistry: PluginRegistry { }
property BarWidgetRegistry barWidgetRegistry: BarWidgetRegistry { }
property AppLibrary appLibrary: AppLibrary { }
property string home: Quickshell.env("HOME")
// The omarchy-shell host is the long-running entry point. Plugins live in
// sibling directories under plugins/. OMARCHY_PATH is provided by the uwsm
// session environment and is the single source of truth for this checkout.
property string omarchyPath: Quickshell.env("OMARCHY_PATH")
readonly property string shellPath: omarchyPath + "/shell"
readonly property string firstPartyPluginsDir: shellPath + "/plugins"
readonly property string defaultsPath: omarchyPath + "/config/omarchy/shell.json"
readonly property string userConfigPath: home + "/.config/omarchy/shell.json"
// Bundled fallback so the shell can start even when the default shell.json is
// missing or unreadable. The bar config here mirrors the on-disk defaults
// closely enough to render a usable bar; not authoritative.
readonly property var builtinShellConfig: ({
version: 1,
idle: {
screensaver: 150,
lock: 300
},
bar: {
position: "top",
transparent: false,
centerAnchor: "omarchy.clock",
layout: {
left: [{ id: "omarchy.menu" }, { id: "omarchy.workspaces" }],
center: [{ id: "omarchy.clock", format: "dddd HH:mm" }],
right: [{ id: "omarchy.audio" }]
}
},
plugins: []
})
property var defaultsConfig: builtinShellConfig
property var shellConfig: builtinShellConfig
property bool pluginReloading: false
property bool pluginReloadPending: false
Timer {
id: localPluginReloadTimer
interval: 150
onTriggered: shell.reloadPlugins()
}
onShellConfigChanged: {
if (failedBarId !== "") failedBarId = ""
pluginRegistry.registryRevision++
pluginRegistry.pluginsChanged()
}
function applyShellConfig() {
// Decide which source is canonical: a valid user shell.json overrides
// defaults entirely; otherwise fall back to defaults. We do not deep-merge.
var defaults = Util.isPlainObject(defaultsConfig) ? defaultsConfig : builtinShellConfig
var user = null
var userText = userConfigFile.text() || ""
if (userText.trim()) {
try {
var parsed = JSON.parse(userText)
if (Util.isPlainObject(parsed) && parsed.version === 1) user = parsed
else if (Util.isPlainObject(parsed)) console.warn("shell.json missing version: 1, using defaults")
} catch (e) {
console.warn("shell.json parse failed, using defaults:", e)
}
}
shellConfig = user || defaults
}
function loadDefaults(raw) {
var text = String(raw || "").trim()
if (!text) {
defaultsConfig = builtinShellConfig
applyShellConfig()
return
}
try {
var parsed = JSON.parse(text)
if (Util.isPlainObject(parsed) && parsed.version === 1) defaultsConfig = parsed
else defaultsConfig = builtinShellConfig
} catch (e) {
console.warn("default shell.json parse failed, using builtin:", e)
defaultsConfig = builtinShellConfig
}
applyShellConfig()
}
function persistShellConfig(nextConfig) {
var payload = JSON.parse(JSON.stringify(nextConfig))
payload.version = 1
shellConfig = payload
userConfigFile.setText(JSON.stringify(payload, null, 2) + "\n")
}
readonly property var barConfig: shellConfig && Util.isPlainObject(shellConfig.bar) ? shellConfig.bar : builtinShellConfig.bar
onBarConfigChanged: if (bar && "barConfig" in bar) bar.barConfig = shell.barConfig
FileView {
id: defaultsFile
path: shell.defaultsPath
watchChanges: true
printErrors: false
onLoaded: shell.loadDefaults(text())
onLoadFailed: function(error) {
console.warn("default shell.json load failed: " + error + " path=" + shell.defaultsPath)
shell.loadDefaults("")
}
onFileChanged: reload()
}
FileView {
id: userConfigFile
path: shell.userConfigPath
watchChanges: true
atomicWrites: true
printErrors: false
onLoaded: shell.applyShellConfig()
onLoadFailed: function(error) { shell.applyShellConfig() }
onFileChanged: reload()
}
Component.onCompleted: {
console.log("omarchy-shell paths",
"omarchyPath=" + shell.omarchyPath,
"shellDir=" + Quickshell.shellDir,
"firstPartyPluginsDir=" + shell.firstPartyPluginsDir,
"defaultsPath=" + shell.defaultsPath,
"userConfigPath=" + shell.userConfigPath)
pluginRegistry.firstPartyDir = shell.firstPartyPluginsDir
pluginRegistry.shellConfigProvider = function() { return shell.shellConfig }
pluginRegistry.shellConfigMutator = function(mutate) { shell.mutateShellConfig(mutate) }
// PluginRegistry.ensureUserDir() runs in its own Component.onCompleted and
// chains rescan() once the directory exists. We also kick a scan here in
// case the user dir already existed at startup.
pluginRegistry.rescan()
shell._syncServices()
}
function mutateShellConfig(mutator) {
var copy = JSON.parse(JSON.stringify(shellConfig || builtinShellConfig))
mutator(copy)
persistShellConfig(copy)
}
// Exposed as a property so child plugins (notifications, future panels)
// can read barSize/barHidden/position to anchor relative to the active bar.
readonly property string defaultBarId: "omarchy.bar"
readonly property string selectedBarId: {
var config = shell.barConfig
if (Util.isPlainObject(config)) {
var configured = Util.canonicalWidgetId(String(config.id || ""))
if (configured) return configured
}
return shell.defaultBarId
}
property string failedBarId: ""
readonly property bool selectedBarAvailable: {
var revision = shell.pluginRegistry.registryRevision
return shell.barOptionAvailable(shell.selectedBarId)
}
readonly property string activeBarId: selectedBarId !== failedBarId && selectedBarAvailable ? selectedBarId : defaultBarId
readonly property var activeBarManifest: {
var revision = shell.pluginRegistry.registryRevision
return shell.barManifestFor(shell.activeBarId)
}
readonly property string activeBarSourceUrl: activeBarId === defaultBarId ? "" : shell.pluginRegistry.entryPointUrl(activeBarManifest, "bar")
property var bar: null
onSelectedBarIdChanged: if (failedBarId !== "") failedBarId = ""
function barManifestFor(pluginId) {
var plugins = shell.pluginRegistry ? shell.pluginRegistry.installedPlugins : null
return plugins ? plugins[String(pluginId || "")] || null : null
}
function isBarOptionManifest(manifest) {
return manifest
&& Array.isArray(manifest.kinds)
&& manifest.kinds.indexOf("bar") !== -1
&& manifest.entryPoints
&& manifest.entryPoints.bar
}
function barOptionAvailable(pluginId) {
var id = String(pluginId || "")
if (id === "" || id === shell.defaultBarId) return true
var manifest = shell.barManifestFor(id)
return shell.isBarOptionManifest(manifest) && shell.pluginRegistry.entryPointUrl(manifest, "bar") !== ""
}
function isActiveBarOption(pluginId) {
return String(pluginId || "") === shell.activeBarId
}
function configureBar(target, manifest) {
if (!target) return
if ("omarchyPath" in target) target.omarchyPath = shell.omarchyPath
if ("shell" in target) target.shell = shell
if ("manifest" in target) target.manifest = manifest
if ("barWidgetRegistry" in target) target.barWidgetRegistry = shell.barWidgetRegistry
if ("pluginRegistry" in target) target.pluginRegistry = shell.pluginRegistry
if ("barConfig" in target) target.barConfig = shell.barConfig
shell.bar = target
}
Component {
id: defaultBarComponent
Bar {
omarchyPath: shell.omarchyPath
barWidgetRegistry: shell.barWidgetRegistry
barConfig: shell.barConfig
shell: shell
manifest: shell.barManifestFor(shell.defaultBarId)
}
}
Loader {
id: defaultBarLoader
active: shell.activeBarId === shell.defaultBarId
sourceComponent: defaultBarComponent
onLoaded: shell.configureBar(item, shell.barManifestFor(shell.defaultBarId))
onActiveChanged: if (!active && shell.activeBarId !== shell.defaultBarId) shell.bar = null
}
Loader {
id: pluginBarLoader
active: !shell.pluginReloading && shell.activeBarId !== shell.defaultBarId && shell.activeBarSourceUrl !== ""
source: shell.activeBarId !== shell.defaultBarId ? shell.activeBarSourceUrl : ""
asynchronous: true
onLoaded: shell.configureBar(item, shell.activeBarManifest)
onActiveChanged: if (!active) shell.bar = null
onStatusChanged: {
if (status === Loader.Error) {
var detail = errorString && errorString() ? errorString() : ""
console.warn("bar option " + shell.activeBarId + " failed to load, falling back to " + shell.defaultBarId + ":", detail)
shell.failedBarId = shell.activeBarId
}
}
}
// ------------------------------------------------------------- services
//
// Generic loader for any enabled plugin that declares kind "service".
// First-party infrastructure services are implicitly enabled by the registry;
// third-party services are enabled by adding the plugin id to shell.json.
Item {
id: serviceHost
visible: false
}
property var _services: ({})
function serviceFor(pluginId) {
return _services[String(pluginId)] || null
}
function firstPartyServiceFor(pluginId) {
return serviceFor(pluginId)
}
function ensureService(pluginId) {
var key = String(pluginId)
if (_services[key]) return _services[key]
var manifest = pluginRegistry && pluginRegistry.installedPlugins
? pluginRegistry.installedPlugins[key] : null
if (!manifest) return null
if (!Array.isArray(manifest.kinds) || manifest.kinds.indexOf("service") === -1) return null
if (!manifest.entryPoints || !manifest.entryPoints.service) return null
var url = pluginRegistry.entryPointUrl(manifest, "service")
if (!url) return null
var comp = Qt.createComponent(url, Component.PreferSynchronous)
function finalize() {
if (comp.status !== Component.Ready) {
console.warn("service plugin load failed for " + key + ": " + comp.errorString())
return
}
var inst = comp.createObject(serviceHost)
if (!inst) {
console.warn("service plugin createObject returned null for", key)
return
}
if ("omarchyPath" in inst) inst.omarchyPath = shell.omarchyPath
if ("shell" in inst) inst.shell = shell
if ("manifest" in inst) inst.manifest = manifest
if ("barWidgetRegistry" in inst) inst.barWidgetRegistry = shell.barWidgetRegistry
if ("pluginRegistry" in inst) inst.pluginRegistry = shell.pluginRegistry
var snext = ({})
for (var sk in _services) snext[sk] = _services[sk]
snext[key] = inst
_services = snext
}
if (comp.status === Component.Loading) {
comp.statusChanged.connect(finalize)
return null
}
finalize()
return _services[key] || null
}
function _syncServices() {
if (!pluginRegistry || !pluginRegistry.installedPlugins) return
var plugins = pluginRegistry.installedPlugins
for (var id in plugins) {
var m = plugins[id]
if (!m) continue
if (!Array.isArray(m.kinds) || m.kinds.indexOf("service") === -1) continue
if (!m.entryPoints || !m.entryPoints.service) continue
if (!pluginRegistry.isEnabled(id)) continue
if (_services[id]) continue
ensureService(id)
}
// Drop services for plugins that have been disabled or removed.
for (var existingId in _services) {
var stillThere = plugins[existingId]
var stillEnabled = stillThere && pluginRegistry.isEnabled(existingId)
if (stillThere && stillEnabled) continue
var inst = _services[existingId]
if (inst && typeof inst.destroy === "function") inst.destroy()
var next = ({})
for (var k in _services) if (k !== existingId) next[k] = _services[k]
_services = next
}
}
function unloadPluginServices() {
for (var existingId in _services) {
var inst = _services[existingId]
if (inst && typeof inst.destroy === "function") inst.destroy()
}
_services = ({})
}
Connections {
target: shell.pluginRegistry
function onPluginsChanged() { if (!shell.pluginReloading) shell._syncServices() }
}
// Writes inline settings to a bar layout entry or top-level plugin entry in
// shell.json. moduleName is the entry id; settings is the merged plugin
// state. Returns true if anything actually changed. Compute the proposed
// new shellConfig in a local clone, and only persist if anything actually
// changed so reactive bindings do not dirty shell.json unnecessarily.
function updateEntryInline(moduleName, settings) {
var stripped = Util.canonicalWidgetId(moduleName)
var copy = JSON.parse(JSON.stringify(shellConfig || builtinShellConfig))
if (!Util.isPlainObject(copy.bar)) copy.bar = { layout: { left: [], center: [], right: [] } }
if (!Util.isPlainObject(copy.bar.layout)) copy.bar.layout = { left: [], center: [], right: [] }
if (!Array.isArray(copy.plugins)) copy.plugins = []
var sections = ["left", "center", "right"]
var foundInLayout = false
var dirty = false
for (var s = 0; s < sections.length; s++) {
var arr = copy.bar.layout[sections[s]] || []
for (var i = 0; i < arr.length; i++) {
if (arr[i] && Util.canonicalWidgetId(arr[i].id) === stripped) {
var next = { id: stripped }
for (var k in settings) if (k !== "id") next[k] = settings[k]
if (JSON.stringify(arr[i]) !== JSON.stringify(next)) {
arr[i] = next
dirty = true
}
foundInLayout = true
}
}
}
if (!foundInLayout) {
for (var j = 0; j < copy.plugins.length; j++) {
if (copy.plugins[j] && copy.plugins[j].id === stripped) {
var pnext = { id: stripped }
for (var pk in settings) if (pk !== "id") pnext[pk] = settings[pk]
if (JSON.stringify(copy.plugins[j]) !== JSON.stringify(pnext)) {
copy.plugins[j] = pnext
dirty = true
}
}
}
}
if (!dirty) return false
persistShellConfig(copy)
return true
}
// ---------------------------------------------------------- on-demand panels
// openPanelIds is a plain object treated as a set. A plugin id maps to
// `true` while the panel is summoned; deleting the key (well, building a new
// object without it) hides it. Reassigning the whole object is required for
// QML to notice the change.
property var openPanelIds: ({})
// Pending payloads to deliver to a plugin's open() once its loader resolves.
// Keyed by plugin id; the value is an array so two summon() calls before
// the Loader resolves both reach the plugin in arrival order rather than
// the second clobbering the first.
property var pendingPayloads: ({})
// Bar-widget panels (audio, bluetooth, network, power, monitor, etc.)
// are mounted inside the bar, not via the panel loader below. Route
// summon/hide/toggle to the live bar instance so panel hotkeys survive
// plugin/bar reloads: the bar re-creates the widget, while a fixed IPC
// target only ever routes to one of the per-monitor instances.
function isBarWidgetPanelPlugin(pluginId) {
var plugins = shell.pluginRegistry.installedPlugins
var m = plugins[String(pluginId || "")]
if (!m || !Array.isArray(m.kinds)) return false
if (m.kinds.indexOf("bar-widget") === -1) return false
// Plugins that are also panel/overlay/menu kinds are owned by the
// panel loader (e.g. omarchy.menu); let that path handle them.
var loaderKinds = ["panel", "overlay", "menu"]
for (var i = 0; i < loaderKinds.length; i++) {
if (m.kinds.indexOf(loaderKinds[i]) !== -1) return false
}
return true
}
function summon(pluginId, payloadJson) {
var id = shell.pluginRegistry.resolveEnabledId(pluginId)
if (!id) return false
var plugins = shell.pluginRegistry.installedPlugins
if (!plugins[id]) {
console.warn("summon: unknown plugin", id)
return false
}
// A disabled plugin has no Loader, so setting openPanelIds would only
// produce an invisible "open" state that toggle() then has to unwind.
// Tell the caller plainly instead of silently no-op'ing.
if (!shell.pluginRegistry.isEnabled(id)) {
console.warn("summon: plugin not enabled, not summoning:", id)
return false
}
// Bar widgets take no payload; payloadJson is dropped on this path.
if (shell.isBarWidgetPanelPlugin(id)) {
var summoned = shell.bar && typeof shell.bar.summonBarWidget === "function"
&& shell.bar.summonBarWidget(id)
if (!summoned) console.warn("summon: no live bar widget for:", id)
return summoned === true
}
var next = ({})
for (var k in openPanelIds) next[k] = openPanelIds[k]
next[id] = true
openPanelIds = next
// Stash payload so the Loader.onLoaded handler can hand it to open().
var pending = ({})
for (var p in pendingPayloads) pending[p] = pendingPayloads[p].slice()
var queue = pending[id] || []
queue.push(payloadJson || "")
pending[id] = queue
pendingPayloads = pending
// If the plugin is keepLoaded and already mounted, deliver immediately.
deliverIfLoaded(id)
return true
}
function hide(pluginId) {
var id = shell.pluginRegistry.resolveEnabledId(pluginId)
if (!id) return false
if (shell.isBarWidgetPanelPlugin(id)) {
var hidden = shell.bar && typeof shell.bar.hideBarWidget === "function"
&& shell.bar.hideBarWidget(id)
if (!hidden) console.warn("hide: no live bar widget for:", id)
return hidden === true
}
invokeIfLoaded(id, "close", null)
if (!openPanelIds[id]) return true
var next = ({})
for (var k in openPanelIds) if (k !== id) next[k] = openPanelIds[k]
openPanelIds = next
return true
}
function isPluginOpen(pluginId) {
var id = shell.pluginRegistry.resolveEnabledId(pluginId)
if (shell.isBarWidgetPanelPlugin(id)) {
return shell.bar && typeof shell.bar.isBarWidgetOpen === "function"
? shell.bar.isBarWidgetOpen(id)
: false
}
var loader = panelLoaders[id]
if (loader && loader.item && loader.item.opened !== undefined)
return loader.item.opened === true
return openPanelIds[id] === true
}
function toggle(pluginId, payloadJson) {
var id = shell.pluginRegistry.resolveEnabledId(pluginId)
return isPluginOpen(id) ? hide(id) : summon(id, payloadJson)
}
// Map of pluginId -> Loader, populated by the Instantiator delegate below.
property var panelLoaders: ({})
function registerPanelLoader(pluginId, loader) {
var next = ({})
for (var k in panelLoaders) next[k] = panelLoaders[k]
next[pluginId] = loader
panelLoaders = next
deliverIfLoaded(pluginId)
}
function unregisterPanelLoader(pluginId) {
if (!panelLoaders[pluginId]) return
var next = ({})
for (var k in panelLoaders) if (k !== pluginId) next[k] = panelLoaders[k]
panelLoaders = next
}
function unloadPanels() {
for (var id in panelLoaders) hide(id)
panelEntries = []
panelLoaders = ({})
pendingPayloads = ({})
openPanelIds = ({})
}
function deliverIfLoaded(pluginId) {
var loader = panelLoaders[pluginId]
if (!loader || !loader.item) return
var queue = pendingPayloads[pluginId]
if (!Array.isArray(queue) || queue.length === 0) return
if (typeof loader.item.open === "function") {
for (var i = 0; i < queue.length; i++) {
try { loader.item.open(queue[i]) } catch (e) {
console.warn("plugin " + pluginId + " open() threw:", e)
}
}
}
var next = ({})
for (var k in pendingPayloads) if (k !== pluginId) next[k] = pendingPayloads[k].slice()
pendingPayloads = next
}
function invokeIfLoaded(pluginId, method, arg) {
var loader = panelLoaders[pluginId]
if (!loader || !loader.item) return
if (typeof loader.item[method] !== "function") return
try { loader.item[method](arg) } catch (e) {
console.warn("plugin " + pluginId + " " + method + "() threw:", e)
}
}
function callIfLoaded(pluginId, method, arg) {
var id = shell.pluginRegistry.resolveEnabledId(pluginId)
var loader = panelLoaders[id]
if (!loader || !loader.item) return "unknown"
if (typeof loader.item[method] !== "function") return "unknown"
try {
var result = loader.item[method](arg)
return result === undefined || result === null ? "ok" : String(result)
} catch (e) {
console.warn("plugin " + id + " " + method + "() threw:", e)
return "error"
}
}
// One Loader per discoverable panel/overlay/menu plugin. Active when the
// host marks it open. The Loader holds onto the instance while active so the
// plugin's FloatingWindow + state survive between summons within a session.
property var panelEntries: []
function computePanelEntries() {
var out = []
var plugins = shell.pluginRegistry.installedPlugins
var panelKinds = ["panel", "overlay", "menu"]
for (var id in plugins) {
var m = plugins[id]
if (!m || !Array.isArray(m.kinds)) continue
var matched = false
for (var i = 0; i < panelKinds.length; i++)
if (m.kinds.indexOf(panelKinds[i]) !== -1) { matched = true; break }
if (!matched) continue
if (!shell.pluginRegistry.isEnabled(id)) continue
var kind = m.kinds.indexOf("panel") !== -1 ? "panel"
: (m.kinds.indexOf("overlay") !== -1 ? "overlay" : "menu")
out.push({ id: id, manifest: m, kind: kind, keepLoaded: m.keepLoaded === true })
}
return out
}
Connections {
target: shell.pluginRegistry
function onPluginsChanged() { if (!shell.pluginReloading) shell.panelEntries = shell.computePanelEntries() }
}
Instantiator {
model: shell.panelEntries
active: true
delegate: QtObject {
id: panelEntry
required property var modelData
readonly property string pluginId: modelData.id
readonly property var manifest: modelData.manifest
readonly property string entryKind: modelData.kind
readonly property bool keepLoaded: modelData.keepLoaded === true
readonly property string sourceUrl: shell.pluginRegistry.entryPointUrl(manifest, entryKind)
property Loader panelLoader: Loader {
source: panelEntry.sourceUrl
active: panelEntry.sourceUrl !== "" && (panelEntry.keepLoaded || shell.openPanelIds[panelEntry.pluginId] === true)
asynchronous: true
onLoaded: {
if (!item) return
if ("omarchyPath" in item) item.omarchyPath = shell.omarchyPath
if ("shell" in item) item.shell = shell
if ("manifest" in item) item.manifest = panelEntry.manifest
if ("barWidgetRegistry" in item) item.barWidgetRegistry = shell.barWidgetRegistry
if ("pluginRegistry" in item) item.pluginRegistry = shell.pluginRegistry
// Plugins that pair a panel UI with a service entry read shared
// state off `service`. Hand them the matching singleton if one was
// loaded.
if ("service" in item) item.service = shell.serviceFor(panelEntry.pluginId)
shell.registerPanelLoader(panelEntry.pluginId, this)
}
onStatusChanged: {
if (status === Loader.Error) {
// Loader.errorString() reflects the source-load failure even when
// sourceComponent is null. Surface both so the user sees something
// actionable instead of a panel that silently refuses to open.
var detail = errorString && errorString() ? errorString() : ""
if (!detail && sourceComponent) detail = sourceComponent.errorString()
console.warn("panel plugin " + panelEntry.pluginId + " failed to load:", detail)
shell.hide(panelEntry.pluginId)
}
}
Component.onDestruction: shell.unregisterPanelLoader(panelEntry.pluginId)
}
}
}
// ---------------------------------------------------------- plugin loader
// Mirror plugin registry state into BarWidgetRegistry whenever it changes.
// Each enabled plugin with kind "bar-widget" gets a Component created from
// its manifest entry point and registered under its manifest id. Built-in
// widgets use the same first-party manifest contract as third-party widgets.
Connections {
target: shell.pluginRegistry
function onPluginsChanged() { if (!shell.pluginReloading) shell.syncPluginWidgets() }
}
property var pluginWidgetComponents: ({})
function syncPluginWidgets() {
var plugins = shell.pluginRegistry.installedPlugins
var seen = ({})
for (var pluginId in plugins) {
var manifest = plugins[pluginId]
if (!manifest || !manifest.kinds || manifest.kinds.indexOf("bar-widget") === -1) continue
if (!shell.pluginRegistry.isEnabled(pluginId)) continue
var registryKey = String(manifest.id)
seen[registryKey] = true
// Already loaded with matching source — leave it alone.
var existing = pluginWidgetComponents[registryKey]
var url = shell.pluginRegistry.entryPointUrl(manifest, "barWidget")
if (!url) {
console.warn("Plugin " + manifest.id + " has no barWidget entry point")
continue
}
var meta = manifest.barWidget || {}
meta = {
displayName: meta.displayName || manifest.name,
description: meta.description || manifest.description,
category: meta.category || "Plugin",
allowMultiple: meta.allowMultiple === true,
defaults: meta.defaults || {},
settingsForm: meta.settingsForm || "",
schema: meta.schema || [],
pluginId: manifest.id,
sourceDir: manifest.__sourceDir || "",
source: "plugin"
}
// A load already in flight for this URL registers itself when it
// finishes. Starting a second one produces a second Component for the
// same widget, and swapping a slot's component rebuilds its item —
// briefly running two of the widget, each registering its IPC handler.
if (existing && existing.url === url && !existing.component) continue
// If the component URL is unchanged, just refresh the metadata in
// place. We can't skip this even when the URL matches: manifests can
// change schema, defaults, or sourceDir between rescans, and the
// settings panel reads metadata from the registry.
if (existing && existing.url === url && shell.barWidgetRegistry.has(registryKey)) {
shell.barWidgetRegistry.register(registryKey, existing.component, meta)
continue
}
loadPluginWidget(registryKey, url, meta)
}
// Drop registrations for plugins that are no longer present or enabled.
var allIds = shell.barWidgetRegistry.availableIds()
for (var i = 0; i < allIds.length; i++) {
var id = allIds[i]
if (!pluginWidgetComponents[id]) continue
if (!seen[id]) {
shell.barWidgetRegistry.unregister(id)
var next = ({})
for (var k in pluginWidgetComponents) if (k !== id) next[k] = pluginWidgetComponents[k]
pluginWidgetComponents = next
}
}
}
function unloadPluginWidgets() {
for (var id in pluginWidgetComponents) shell.barWidgetRegistry.unregister(id)
pluginWidgetComponents = ({})
}
function reloadPlugins() {
if (shell.pluginReloading || shell.pluginRegistry.scanning) {
shell.pluginReloadPending = true
return
}
shell.pluginReloading = true
shell.unloadPanels()
shell.unloadPluginServices()
shell.unloadPluginWidgets()
Qt.callLater(shell.finishPluginReload)
}
function finishPluginReload() {
if (!shell.pluginReloading) return
if (shell.pluginRegistry.scanning) {
shell.pluginReloadPending = true
return
}
if (typeof Qt.clearComponentCache === "function") Qt.clearComponentCache()
shell.pluginRegistry.rescan()
}
Connections {
target: shell.pluginRegistry
function onLocalPluginChanged(pluginId) {
console.log("Local plugin changed, reloading:", pluginId)
localPluginReloadTimer.restart()
}
function onScanFinished() {
if (shell.pluginReloadPending) {
shell.pluginReloadPending = false
shell.pluginReloading = false
Qt.callLater(shell.reloadPlugins)
return
}
shell.pluginReloading = false
shell._syncServices()
shell.panelEntries = shell.computePanelEntries()
shell.syncPluginWidgets()
}
}
function setPluginWidgetComponent(registryKey, entry) {
var next = ({})
for (var k in pluginWidgetComponents) if (k !== registryKey) next[k] = pluginWidgetComponents[k]
if (entry) next[registryKey] = entry
pluginWidgetComponents = next
}
function loadPluginWidget(registryKey, url, meta) {
// Claim the key before the component exists. Qt.createComponent is
// asynchronous and syncPluginWidgets runs several times while the shell
// starts, so without a marker the later passes cannot tell a load in
// flight from one that never happened.
setPluginWidgetComponent(registryKey, { url: url, component: null })
var comp = Qt.createComponent(url, Component.Asynchronous)
function finalize() {
if (comp.status === Component.Ready) {
shell.barWidgetRegistry.register(registryKey, comp, meta)
shell.setPluginWidgetComponent(registryKey, { url: url, component: comp })
} else if (comp.status === Component.Error) {
console.warn("Plugin widget " + registryKey + " failed: " + comp.errorString())
// Drop the claim so a later rescan can retry.
shell.setPluginWidgetComponent(registryKey, null)
shell.pluginRegistry.pluginLoadFailed(registryKey, comp.errorString())
}
}
if (comp.status === Component.Loading) {
comp.statusChanged.connect(finalize)
} else {
finalize()
}
}
// --------------------------------------------------- image selector IPC
function imagePickerItem() {
var loader = panelLoaders["omarchy.image-picker"]
return loader && loader.item ? loader.item : null
}
IpcHandler {
target: "image-selector"
function open(imageDirs: string,
imageRowsB64: string,
selectedImage: string,
selectionFile: string,
doneFile: string,
showLabels: string,
filterable: string): string {
var payload = JSON.stringify({
imageDirs: imageDirs,
imageRows: Util.decodeBase64(imageRowsB64),
selectedImage: selectedImage,
selectionFile: selectionFile,
doneFile: doneFile,
showLabels: showLabels,
filterable: filterable
})
return shell.summon("omarchy.image-picker", payload) ? "ok" : "unknown"
}
function preload(imageRowsB64: string,
selectedImage: string,
showLabels: string,
filterable: string): string {
var picker = shell.imagePickerItem()
if (picker && typeof picker.preloadRows === "function") {
picker.preloadRows(Util.decodeBase64(imageRowsB64), selectedImage,
showLabels, filterable)
}
return "ok"
}
function cancel(doneFile: string): string {
var picker = shell.imagePickerItem()
if (picker && typeof picker.closeSelector === "function") {
picker.closeSelector(doneFile || "")
} else {
shell.hide("omarchy.image-picker")
}
return "ok"
}
function ping(): string {
return "ok"
}
}
// ---------------------------------------------------------- shell IPC
IpcHandler {
target: "shell"
function ping(): string {
return "ok"
}
function applyTheme(colorsB64: string, shellB64: string): string {
var colorsRaw = ""
var shellRaw = ""
try { colorsRaw = Qt.atob(String(colorsB64 || "")) } catch (e) { colorsRaw = "" }
try { shellRaw = Qt.atob(String(shellB64 || "")) } catch (e2) { shellRaw = "" }
Color.loadColors(colorsRaw)
Color.loadShell(shellRaw)
Style.scheduleRefresh()
return "ok"
}
function rescanPlugins(): void {
shell.reloadPlugins()
}
function reloadConfig(): string {
userConfigFile.reload()
return "ok"
}
function toggleBarTransparency(): string {
if (shell.bar && typeof shell.bar.toggleTransparency === "function") {
shell.bar.toggleTransparency()
return "ok"
}
return "no-bar"
}
function setPluginEnabled(id: string, enabled: string): string {
return shell.pluginRegistry.setEnabled(id, enabled === "true") ? "ok" : "unknown"
}
function enablePlugin(id: string, placementJson: string): string {
try {
var placement = JSON.parse(placementJson || "{}")
if (shell.pluginRegistry.setEnabled(id, true, placement)) return "ok"
return shell.pluginRegistry.lastEnableError || "unknown"
} catch (e) {
return "invalid placement: " + e
}
}
// Enable, but only where the widget is not on the bar already, so a caller
// that cannot know whether it ran before leaves a placed widget alone.
function putBarWidget(id: string, placementJson: string): string {
if (shell.pluginRegistry.inBar(id)) return "ok"
return enablePlugin(id, placementJson)
}
function moveBarWidget(id: string, placementJson: string): string {
try {
var error = shell.pluginRegistry.moveBarWidget(id, JSON.parse(placementJson || "{}"))
return error ? error : "ok"
} catch (e) {
return "invalid placement: " + e
}
}
function setBarWidget(id: string, key: string, valueJson: string, selectorJson: string): string {
try {
var value = JSON.parse(valueJson)
var selector = JSON.parse(selectorJson || "{}")
var error = shell.pluginRegistry.setBarWidget(id, key, value, selector)
return error ? error : "ok"
} catch (e) {
return "invalid widget setting: " + e
}
}
function listPlugins(): string {
var out = []
var plugins = shell.pluginRegistry.installedPlugins
for (var id in plugins) {
var kinds = plugins[id].kinds || []
var isBarOption = Array.isArray(kinds) && kinds.indexOf("bar") !== -1
var isBarWidget = Array.isArray(kinds) && kinds.indexOf("bar-widget") !== -1
var active = isBarOption && shell.isActiveBarOption(id)
var metadata = plugins[id].omarchy
var clonedFrom = Util.isPlainObject(metadata) ? String(metadata.clonedFrom || "") : ""
out.push({
id: id,
name: plugins[id].name,
kinds: kinds,
// What `omarchy plugin enable/disable` toggles: for a widget that is
// its place in the bar, not whether its component is loadable.
enabled: isBarOption ? active
: (isBarWidget ? shell.pluginRegistry.inBar(id) : shell.pluginRegistry.isEnabled(id)),
active: active,
// A bar has no off, only a successor: you leave one by enabling
// another, so there is nothing for disable to do to it. Said here so
// that a caller offering the verbs does not have to read kinds and
// work it out again.
canDisable: !isBarOption,
firstParty: !!plugins[id].__isFirstParty,
clonedFrom: clonedFrom
})
}
// Consumers should not each invent their own presentation order.
out.sort(function(left, right) {
var leftName = String(left.name || left.id)
var rightName = String(right.name || right.id)
if (leftName < rightName) return -1
if (leftName > rightName) return 1
return String(left.id).localeCompare(String(right.id))
})
return JSON.stringify(out)
}
// Returns the effective shell.json content as JSON. Useful for debugging
// and for CLI tools that want to inspect the merged state without
// re-implementing the load logic.
function listShellConfig(): string {
return JSON.stringify(shell.shellConfig || {})
}
function debugBarGeometry(): string {
return JSON.stringify(shell.bar && shell.bar.debugBarGeometry ? shell.bar.debugBarGeometry() : [])
}
function summon(id: string, payloadJson: string): string {
return shell.summon(id, payloadJson) ? "ok" : "unknown"
}
function hide(id: string): void {
shell.hide(id)
}
function toggle(id: string, payloadJson: string): void {
shell.toggle(id, payloadJson)
}
function call(id: string, method: string, arg: string): string {
return shell.callIfLoaded(id, method, arg)
}
}
}