Update the tagline to Beautiful, Fun & Agentic (#144)

Matches omarchy.org and the omarchy repo. The centring math keys off the string length, so the shorter line stays centred.

bin/omarchy-iso-make

@@ -158,7 +158,15 @@ else
   DOCKER_ARGS+=(--pull=always)
 fi
 
-docker run "${DOCKER_ARGS[@]}" archlinux/archlinux:latest /$BUILD_SCRIPT
+# The docker group is root-equivalent, so Omarchy operators stay out of it on
+# purpose. When the socket refuses the calling user, run the client through
+# sudo instead of requiring group membership.
+DOCKER=(docker)
+if ! docker version &>/dev/null; then
+  DOCKER=(sudo docker)
+fi
+
+"${DOCKER[@]}" run "${DOCKER_ARGS[@]}" archlinux/archlinux:latest /$BUILD_SCRIPT
 
 latest_iso=$(\ls -t "$BUILD_RELEASE_PATH"/*.iso | head -n1)
 iso_ref="${latest_iso%.*}-$OMARCHY_ISO_REF.iso"

bin/omarchy-iso-release

@@ -1,5 +1,10 @@
 #!/bin/bash
 
+# A failed step must stop the release: without this, a make that dies (say,
+# docker permission denied) falls through to signing and uploading whatever
+# stale ISO release/ already holds, under the new release's name.
+set -e
+
 MAKE_ARGS=()
 ISO_REF=quattro
 RELEASE_SUFFIX=""
@@ -37,6 +42,14 @@ if [[ -z "${BUILD_VERSION-}" ]]; then
   exit 1
 fi
 
+# A version that already numbers its candidate (4.0.2rc2) is the complete
+# artifact name; the bare -rc suffix exists only for an unnumbered candidate.
+# Without this, every candidate of a train uploads over the same
+# omarchy-X.Y.Z-rc.iso and testers cannot tell which rc they are holding.
+if [[ $BUILD_VERSION == *rc* ]]; then
+  RELEASE_SUFFIX=""
+fi
+
 BUILD_ROOT=$(realpath "${BASH_SOURCE[0]%/*}/..")
 BUILD_RELEASE_PATH="$BUILD_ROOT/release"
 
@@ -70,3 +83,9 @@ fi
 echo -e "\e[32mSHA256 for $ISO_REF ISO: $iso_sha\e[0m"
 
 omarchy-iso-upload "$release_iso"
+
+# The whole point of a release is handing someone this pair.
+echo -e "\e[32mReleased $ISO_REF ISO $BUILD_VERSION\e[0m"
+echo "  URL:    https://iso.omarchy.org/${release_iso##*/}"
+echo "  SHA256: $iso_sha"
+echo "  Local:  $release_iso"

bin/omarchy-iso-test

@@ -18,9 +18,10 @@
 #                      first boot runs omarchy-provision-owner and creates it there
 #   --reuse-base       Skip the install phase if a base image already exists
 #   --install-only     Stop after producing the installed base image
-#   --sync-omarchy DIR Push DIR's test/acceptance into the guest before running
+#   --sync-omarchy DIR Push DIR's test suite into the guest before running
 #                      (defaults to OMARCHY_PATH when the suite is present)
 #   --sync-all DIR     Push all of DIR (bin/config/shell/test) into the guest
+#                      and also run the CLI and shell suites there
 #   --port PORT        Host port forwarded to guest SSH (default 2222)
 #   --memory MB        VM memory (default 8192)
 #   --timeout SECS     Install timeout (default 2400)
@@ -201,6 +202,11 @@ start_vm() {
   local disk="$1" serial="$2"
   shift 2
 
+  # A viewer that resizes the guest display breaks the console driving: OCR
+  # cannot read the shrunken font, and a resize during early boot can wedge
+  # virtio-gpu before the system comes up.
+  log "Watch (do not resize): vncviewer -RemoteResize=0 127.0.0.1:5905"
+
   qemu-system-x86_64 \
     -cpu host -enable-kvm -machine q35,accel=kvm \
     -smp "$(nproc)" \
@@ -211,6 +217,7 @@ start_vm() {
     -device virtio-blk-pci,drive=drive0,bootindex=1 \
     -device virtio-vga \
     -display none \
+    -vnc 127.0.0.1:5 \
     -usb -device usb-tablet \
     -netdev user,id=net0,hostfwd=tcp:127.0.0.1:$SSH_PORT-:22 \
     -device virtio-net-pci,netdev=net0 \
@@ -400,7 +407,7 @@ guest_layer_absent() {
 }
 
 cleanup_shortcut_state() {
-  ssh_session 'for plugin in omarchy.launcher omarchy.menu omarchy.emojis omarchy.clipboard omarchy.audio; do
+  ssh_session 'for plugin in omarchy.menu omarchy.emojis omarchy.clipboard omarchy.audio; do
     omarchy-shell shell hide "$plugin" >/dev/null 2>&1 || true
   done
   while read -r address; do
@@ -577,8 +584,8 @@ shortcut_smoke_phase() {
 
   local status=0
   local name chord namespace plugin
-  local shortcuts='launcher|meta_l-spc|omarchy-launcher|omarchy.launcher
-menu|meta_l-alt-spc|omarchy-menu|omarchy.menu
+  local shortcuts='menu|meta_l-spc|omarchy-menu|omarchy.menu
+apps-menu|meta_l-alt-spc|omarchy-menu|omarchy.menu
 emojis|meta_l-ctrl-e|omarchy-emojis|omarchy.emojis
 clipboard|meta_l-ctrl-v|omarchy-clipboard|omarchy.clipboard
 audio-panel|meta_l-ctrl-a|omarchy-keyboard-panel|omarchy.audio'
@@ -631,7 +638,11 @@ drive_configurator() {
     capture_console "success-installer-04-prepare-disk-warning-encrypted"
     if ! $ENCRYPT; then
       press ctrl-c
-      wait_for_screen "without encryption" 30
+      # The toggled confirm ("Yes, install without encryption") is a highlighted
+      # button OCR cannot read, so don't wait for it. A failed toggle still
+      # surfaces: the encrypted install stalls at the LUKS prompt on first boot
+      # and SSH never comes up.
+      sleep 2
       capture_console "success-installer-05-prepare-disk-warning-unencrypted"
     fi
     press ret
@@ -695,7 +706,11 @@ drive_configurator() {
   capture_console "success-installer-12-disk-warning-encrypted"
   if ! $ENCRYPT; then
     press ctrl-c # toggles the confirm to the unencrypted flow
-    wait_for_screen "without encryption" 30
+    # The toggled confirm ("Yes, install without encryption") is a highlighted
+    # button OCR cannot read, so don't wait for it. A failed toggle still
+    # surfaces: the encrypted install stalls at the LUKS prompt on first boot
+    # and SSH never comes up.
+    sleep 2
     capture_console "success-installer-13-disk-warning-unencrypted"
   fi
   press ret
@@ -875,40 +890,39 @@ EOF
   (cd "$BASE_DIR/www" && exec python3 -m http.server "$HTTP_PORT" --bind 127.0.0.1 >/dev/null 2>&1) &
   HTTP_PID=$!
 
-  local waited=0
-  while true; do
+  # Type the login blind: a VNC viewer that resizes the framebuffer makes the
+  # console font unreadable to OCR, and the real gate is SSH coming up anyway.
+  # Getty re-prompts after a failed login, so a whole-sequence retry recovers
+  # from typing before the prompt was ready.
+  sleep 15 # give first boot time to reach getty
+  local attempt
+  for attempt in 1 2 3; do
     press ctrl-alt-f3
+    sleep 8
+    press ret # settle a half-typed prompt from a previous attempt
+    sleep 2
+    type_text "$GUEST_USER"
+    capture_console "success-first-boot-03-console-username"
+    press ret
+    sleep 3
+    type_text "$GUEST_PASSWORD"
+    press ret
     sleep 4
-    ocr_screen | grep -qi "login:" && break
-    ((waited += 8))
+    type_text "curl -fsS http://10.0.2.2:$HTTP_PORT/bootstrap -o /tmp/bs && bash /tmp/bs"
+    capture_console "success-first-boot-05-bootstrap-command"
+    press ret
 
-    if ((waited >= 300)); then
-      capture_console "failure-first-boot-console-timeout"
-      echo "Timed out waiting for a console login prompt" >&2
-      return 1
+    if wait_for_ssh 120 "failure-first-boot-ssh-timeout-$attempt"; then
+      capture_console "success-first-boot-06-bootstrap-complete"
+      kill "$HTTP_PID" 2>/dev/null || true
+      HTTP_PID=""
+      press ctrl-alt-f1
+      return 0
     fi
-    sleep 4
   done
 
-  type_text "$GUEST_USER"
-  capture_console "success-first-boot-03-console-username"
-  press ret
-  wait_for_screen "Password" 60
-  type_text "$GUEST_PASSWORD"
-  capture_console "success-first-boot-04-console-password"
-  press ret
-  sleep 3
-
-  type_text "curl -fsS http://10.0.2.2:$HTTP_PORT/bootstrap -o /tmp/bs && bash /tmp/bs"
-  capture_console "success-first-boot-05-bootstrap-command"
-  press ret
-
-  wait_for_ssh 360 "failure-first-boot-ssh-timeout"
-  capture_console "success-first-boot-06-bootstrap-complete"
-
-  kill "$HTTP_PID" 2>/dev/null || true
-  HTTP_PID=""
-  press ctrl-alt-f1
+  echo "Console bootstrap did not produce SSH access after 3 attempts" >&2
+  return 1
 }
 
 # Get a freshly booted system to a running Hyprland session, typing at the
@@ -1058,17 +1072,14 @@ sync_omarchy() {
     log "Syncing $SYNC_DIR into the guest"
     tar -C "$SYNC_DIR" --exclude .git -cf - . | ssh_guest "mkdir -p $target && tar -C $target -xf -"
   else
-    log "Syncing $SYNC_DIR/test/acceptance into the guest"
-    tar -C "$SYNC_DIR/test" -cf - acceptance acceptance.d | ssh_guest "mkdir -p $target/test && tar -C $target/test -xf -"
+    log "Syncing $SYNC_DIR/test into the guest"
+    tar -C "$SYNC_DIR" -cf - test | ssh_guest "mkdir -p $target && tar -C $target -xf -"
   fi
 }
 
 acceptance_phase() {
   log "Booting acceptance VM from base image overlay"
 
-  local guest_omarchy_path="/usr/share/omarchy"
-  $SYNC_ALL && guest_omarchy_path=".local/share/omarchy"
-
   qemu-img create -f qcow2 -b "$BASE_DISK" -F qcow2 "$RUN_DIR/run.qcow2" >/dev/null
   start_vm "$RUN_DIR/run.qcow2" "$RUN_DIR/serial.log"
 
@@ -1078,8 +1089,19 @@ acceptance_phase() {
   local status=0
   shortcut_smoke_phase || status=1
 
+  # The synced tree is a full checkout under --sync-all; run the host-style
+  # CLI and shell suites in the guest too before the graphical acceptance
+  # run. They derive their root from their own location in the synced tree.
+  if $SYNC_ALL; then
+    log "Running CLI and shell suites in the guest"
+    ssh_guest "bash .local/share/omarchy/test/all" || status=$?
+  fi
+
+  # The product under test is always the installed tree — VM runs verify the
+  # finished product, never a dev-linked checkout.
   log "Running acceptance suite"
-  ssh_guest "OMARCHY_PATH=$guest_omarchy_path OMARCHY_ACCEPTANCE_DIR=/tmp/omarchy-acceptance bash .local/share/omarchy/test/acceptance" || status=$?
+  ssh_guest "OMARCHY_PATH=/usr/share/omarchy OMARCHY_ACCEPTANCE_DIR=/tmp/omarchy-acceptance \
+    OMARCHY_ACCEPTANCE_SUDO_PASSWORD=$GUEST_PASSWORD bash .local/share/omarchy/test/acceptance" || status=$?
 
   log "Collecting artifacts into $RUN_DIR"
   ssh_guest "tar -C /tmp -cf - omarchy-acceptance 2>/dev/null" | tar -C "$RUN_DIR" -xf - || true

bin/omarchy-iso-test-stop

@@ -0,0 +1,101 @@
+#!/bin/bash
+#
+# Stop the VM a `omarchy-iso-test --keep-running` run left behind: graceful
+# guest poweroff over SSH first, escalating to TERM then KILL. The base image
+# is untouched either way; only the throwaway run overlay is affected.
+#
+# Usage: omarchy-iso-test-stop [--kill] [--port PORT]
+#
+#   --kill       Skip the graceful poweroff and kill the VM immediately
+#   --port PORT  Host port forwarded to guest SSH (default 2222)
+
+set -euo pipefail
+
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+REPO_DIR="$(dirname "$SCRIPT_DIR")"
+
+GUEST_USER="omarchy"
+GUEST_PASSWORD="omarchy"
+SSH_PORT=2222
+GRACEFUL=true
+
+while (($#)); do
+  case "$1" in
+    --kill) GRACEFUL=false ;;
+    --port) SSH_PORT="$2"; shift ;;
+    -h | --help)
+      sed -n '3,10p' "${BASH_SOURCE[0]}" | sed 's/^# \{0,1\}//'
+      exit 0
+      ;;
+    *) echo "Unknown option: $1" >&2; exit 1 ;;
+  esac
+  shift
+done
+
+# The newest run dir whose qemu is still alive is the VM to stop.
+PID=""
+PIDFILE=""
+while IFS= read -r candidate; do
+  pid=$(<"$candidate")
+  if kill -0 "$pid" 2>/dev/null; then
+    PID="$pid"
+    PIDFILE="$candidate"
+    break
+  fi
+done < <(ls -t "$REPO_DIR"/test-runs/*/runs/*/qemu.pid 2>/dev/null)
+
+if [[ -z $PID ]]; then
+  echo "No running omarchy-iso-test VM found." >&2
+  exit 1
+fi
+
+BASE_DIR="$(dirname "$(dirname "$(dirname "$PIDFILE")")")"
+SSH_KEY="$BASE_DIR/id_ed25519"
+
+# A harness that is still driving this VM dies with it; make sure that is
+# what the caller wants before pulling anything down.
+if [[ -t 0 ]]; then
+  if pgrep -f "bin/omarchy-iso-test .*\.iso" >/dev/null; then
+    echo "Warning: an omarchy-iso-test run appears to be in progress."
+  fi
+  if ! gum confirm "Stop test VM (pid $PID, ${PIDFILE#$REPO_DIR/})?"; then
+    exit 0
+  fi
+fi
+
+echo "Stopping test VM (pid $PID, ${PIDFILE#$REPO_DIR/})"
+
+if $GRACEFUL && [[ -f $SSH_KEY ]]; then
+  ssh -i "$SSH_KEY" -p "$SSH_PORT" \
+    -o BatchMode=yes \
+    -o IdentitiesOnly=yes \
+    -o StrictHostKeyChecking=no \
+    -o UserKnownHostsFile=/dev/null \
+    -o ConnectTimeout=5 \
+    -o LogLevel=ERROR \
+    "$GUEST_USER@127.0.0.1" \
+    "echo $GUEST_PASSWORD | sudo -S systemctl poweroff" >/dev/null 2>&1 || true
+
+  waited=0
+  while kill -0 "$PID" 2>/dev/null && ((waited < 15)); do
+    sleep 1
+    ((waited += 1))
+  done
+fi
+
+if kill -0 "$PID" 2>/dev/null; then
+  kill "$PID" 2>/dev/null || true
+  sleep 1
+fi
+
+if kill -0 "$PID" 2>/dev/null; then
+  kill -9 "$PID" 2>/dev/null || true
+  sleep 1
+fi
+
+if kill -0 "$PID" 2>/dev/null; then
+  echo "VM (pid $PID) refused to die." >&2
+  exit 1
+fi
+
+echo "VM stopped; port $SSH_PORT is free."

configs/airootfs/root/configurator

@@ -122,7 +122,7 @@ greeter() {
   printf '\033[%d;1H' "$logo_row"
   gum style --foreground 2 --padding "0 0 0 $PADDING_LEFT" "$(<"$LOGO_PATH")"
 
-  tagline="Beautiful, Modern & Opinionated Linux by DHH"
+  tagline="Beautiful, Fun & Agentic Linux by DHH"
   tpad=$(((cols - ${#tagline}) / 2)); (( tpad < 0 )) && tpad=0
   printf '\033[%d;%dH%s' "$tagline_row" "$((tpad + 1))" "$tagline"